(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
SINWASOKUTEI Straight Scale Rulers
| Days to Ship |
|
|---|
-
SINWASOKUTEI
Silver-coated ruler which suppresses surface reflection for easily readable scale.
[Features]
· JIS Class 1 with an extensive range of sizes (15 cm to 2 m are available).
· An etched and plated scale whose performance will not deteriorate over time, even when used under harsh conditions.
[Applications]
· Ideal for measuring length.Standard Price: MYR 15.25- Days to Ship: 1 Day(s) or more -
SINWASOKUTEI
A standard ruler to measure length.
[Features]
· JIS Class 1 with an extensive range of sizes from 15 cm to 2 m.
· Stainless steel material used in its original form.
· Inch conversion table on back surface (15 cm to 1 m, no longer than 1.5 m)
[Applications]
· Ideal for measuring the length of straight lines.Standard Price: MYR 13.17- Days to Ship: 1 Day(s) or more -
Angle Ruler, 1 mm Vertical Pitch
SINWASOKUTEI
[Features]
· JIS1 Grade.
· Inch conversion table on back surface.
· Scale: Upper/lower 1 mm pitch.
· A 1 mm pitch, easy to read when fine scales are not necessary.Standard Price: MYR 33.19- Days to Ship: 8 Day(s) or more -
SINWASOKUTEI
[Features]
· JIS Grade 1 (15 cm – 1 m)
· The basic performance is unchanged, with the tip of the scale bent, to make grasping easier
· Large, easily readable numbers are adopted
[Specifications]
· Weights and measures conversion table on back surface.
· Scale: Upper/lower 1 mm pitchStandard Price: MYR 15.15- Days to Ship: 7 Day(s) or more -
Straight Edge: Angle Ruler and Measuring Scale in cm Scale
SINWASOKUTEI
[Features]
· A ruler with a foot equivalent scale convenient for carpenters.
· When either foot equivalent scale or centimeter scale is on the top level of the main body
Double left base point type specification where the base point of the scale is on the end face of the left side.
(Product number 13210 top and bottom scale base points are both at the right end.)
[Specifications]
· Conversion table on back surface Double-left base point type: Weights and measures conversion table on front surface.
Right reference point type: Inch conversion table included
· Scale: Upper level: 1 mm pitch / Lower level: Ft equivalentStandard Price: MYR 53.38- Days to Ship: 8 Day(s) -
Narrow Width Carpenter's Square Angle Ruler
SINWASOKUTEI
A ruler for measuring the dimensions of rounded shapes or for adhering to machinery etc.
[Features]
· A thin, narrow width type.
· Same quality as JIS standard products.
· Silver-coated for easily readable scale.
· Etched and plated scale maintains its performance even under harsh conditions.
[Applications]
· Ideal for measuring length.Standard Price: MYR 36.38- Days to Ship: 1 Day(s) or more -
Aluminum Cutting Ruler Cut Master PROTECT
SINWASOKUTEI
[Features]
· As the protective wall can be folded, it does not intrude when carrying or storing.
· The protective wall with a height of 30 mm (35 mm from the cutting surface) protects hands.
· With a protective cap, it does not damage materials.Standard Price: MYR 235.59- Days to Ship: 9 Day(s) -
Straight Edge: Angle Ruler (with Stopper)
SINWASOKUTEI
A ruler which can measure not only length but also depth or steps.
[Features]
· JIS1 Grade.
· With red numerals.
· With a silver stopper.
[Applications]
· Ideal for measuring length, depth, or steps.
[Specifications]
· Stopper Thickness: 5mm, Width: 22mm (for 15cm)
· Stopper Thickness: 6mm, Width: 35mm (for 30cm)Standard Price: MYR 52.61- Days to Ship: 8 Day(s) -
SINWASOKUTEI
[Features]
· All the scales are width 15 mm x thickness 0.5 mm.
[Material]
· Stainless steel.Standard Price: MYR 96.33- Days to Ship: 4 Day(s) or more -
SINWASOKUTEI
A ruler used for measuring length or as a cutting or grooving ruler.
[Features]
· Lightweight and sturdy ruler which does not rust.
· It uses large, vivid scale numerals.
· The anti-slip type has a sponge on the back, allowing the ruler to be held down with light force.
[Applications]
· For measuring length, grooving, or cutting.Standard Price: MYR 30.08- Days to Ship: 8 Day(s) or more -
Aluminum Ruler, Alusuke (Without Non-Slip Backing)
SINWASOKUTEI
Safe aluminum ruler with easy-to-see large scale numbers and a protective wall to protect your hands.
[Features]
・ Adopted large and clear scale numbers
·The danger prevention wall prevents the cutter blade from slipping and getting over
·With grooving ruler
·Lightweight, rust-proof and durable
[Applications]
·For length measurement, line drawing, grooving, cuttingStandard Price: MYR 16.45- Days to Ship: 9 Day(s) -
SINWASOKUTEI
[Features]
· Made of aluminum, sturdy and light. Unlike woodwork, it is unlikely to distort or bend even when exposed to water.
· Includes both a meter scale and shaku scale that can be used to minimize dimensional errors that occur during measurement and scribing.
· Adopts an easily visible, hard-to-remove scale.
· 4-side scale can be used.
· Can be split into 2 pieces for convenient portability. A lock mechanism is provided for connection, secured simply by plugging it in.
· With double-end rubber cap, no damage is caused to the material.
· A durable storage case made of nylon. (With strap)
[Applications]
· As a measuring stick, for basic ink marking.
· As a master for creating disposable rulers.Standard Price: MYR 736.30 Days to Ship: 8 Day(s) -
Component, Aluminum Sliding Bevel
SINWASOKUTEI
Straightedge aluminum free gold parts.
[Features]
· Grip nut, for black aluminum free gold, nut, aluminum free gold, for welding guide ruler.
· Available in 4 parts such as plastic washer, aluminum free metal / welding guide ruler, core screw, aluminum free metal.
· From 4 types of variations, you can select according to your needs.
[Applications]
· Ideal for replacing aluminum free gold grip nuts, nuts, washers, and core screws
· Can be used as a replacement when parts are damaged or lost.Standard Price: MYR 23.41- Days to Ship: 8 Day(s) -
Stainless Steel Straight Edge Warranty (Product Body and JCSS Calibration Certificate)
SINWASOKUTEI
A straight stainless steel with a JCSS calibration certificate.
[Features]
·It is a JIS grade 1 product and has an inch conversion table on the back.
·You can choose from six sizes: 15 cm, 30 cm, 60 cm, 1 m, 1.5 m, and 2 m, depending on your intended use.
·A certificate that examines and certifies that the technical capabilities and traceability of a business site meet the standards for calibration institution accreditation.
[Applications]
·Available when used for length measurements.Standard Price: MYR 707.15- Days to Ship: 24 Day(s) or more -
SINWASOKUTEI
Aluminum box beam straight ruler
[Features]
· Stable box-type that does not wobble and is not susceptible to distortion.
· Includes a protective cap.
· With tape which can be written on freely.
[Applications]
· For checking base alignment straightness of window and door frames.Standard Price: MYR 358.12- Days to Ship: 8 Day(s) or more -
SINWASOKUTEI
A stopper to be attached to a straight ruler.
[Features]
· By attaching this product to a straight ruler, you can measure not only length but also depth or steps.
[Applications]
· Ideal for scribing work and measuring length, depth and level difference.Standard Price: MYR 31.34- Days to Ship: 1 Day(s) or more -
Mini Scale, 15 cm, Upper and Lower Level 1 mm Pitch
SINWASOKUTEI
A straight scale with a clip that can slide for use as a simple depth gauge.
[Features]
· Narrow and easily portable.
· With a clip for preventing loss/drop.
· Silver processing suppresses the surface reflection to make the scale easy to read.
[Applications]
· Ideal for measuring length.Standard Price: MYR 24.65- Days to Ship: 8 Day(s) or more -
Aluminum Cutter Ruler, Cut Master EX
SINWASOKUTEI
The cutter surface has a thin stainless steel plate pasted on both sides to help ensure that the blades do not catch.
Standard Price: MYR 216.03- Days to Ship: 8 Day(s) or more -
Aluminum Cutter Ruler, Cut Master EX with Handle
SINWASOKUTEI
[Features]
· The cutter surface has a thin stainless steel plate pasted on both sides to help ensure that the blades do not catch.
· An incision-free, non-slip rubber has been adopted.
· Made of elastomer resin. Adopts an easy-grip, easy-hold handle.
· Each scale on the upper and lower levels has a left base point W starting from the edge.
· With a foot equivalent scale convenient for carpenters.
· Light, non-rusting, and durable.
· Large, vivid scale numerals have been adopted.Standard Price: MYR 328.88- Days to Ship: 9 Day(s) -
Aluminum Cutter Ruler, with Cutting Rail
SINWASOKUTEI
A ruler which can be used for measuring length, drawing a straight line, or cutting.
[Features]
· Aluminum cutter ruler with emphasis on safety.
[Applications]
· For length measurement, line drawing, cutting and use as a circular saw guide ruler.Standard Price: MYR 454.10- Days to Ship: 9 Day(s) or more -
Aluminum Cutter Ruler, Cut Master
SINWASOKUTEI
[Features]
· The cutter surface has a thin stainless steel plate pasted on to help ensure that the blades do not catch.
· Anti-slip rubber is attached to the back surface to fix the ruler easily.
· Uses a handle with a special shape that is easy to hold down.
· Double left base point type. The base point of each side (measurement side and cutter side) is the left side. (Part number 65088: base point of the left side)
· With a foot equivalent scale convenient for carpenters.
· Large, vivid scale numerals have been adopted.
· Light, non-rusting, and durable.Standard Price: MYR 176.84- Days to Ship: 4 Day(s) or more -
Aluminum Cutter Ruler, Cut Master with Handle
SINWASOKUTEI
A ruler that can be used for cutting, measuring lengths, demarcation, or as a guide ruler for circular saws.
[Features]
· Lightweight and sturdy, with no rust.Standard Price: MYR 239.76- Days to Ship: 9 Day(s) -
Nobisuke 3x Magnification 2-Direction Measuring Type Combination Scale
SINWASOKUTEI
[Features]
· Expands to 3 times the length and can be read close by.
· Long distances can be easily measured even with just one person.
· The stopper is plastic and will not damage the contacting areas.
· Large, easily readable scale numbers are adopted.
· As it is telescopic in both directions, it is held in the center. Thus it is particularly suitable for measuring inside dimensions by holding the center and extending the rod left and right.
· For interior work, interior construction, fitting installation, front construction, step mounting, block piling, waterworks, stonework, etc.
· A, AB types: For inner dimension measurement of areas with closet storage space, floor cupboards, and crown molding.
· B/C/D/E types: For foot measures and span rods (shaku and ken measurements).Standard Price: MYR 396.26- Days to Ship: 7 Day(s) or more -
SINWASOKUTEI
As the cutter surface has a thin stainless steel plate attached for durability, the cutter teeth do not bite in, allowing for a smooth cutting operation.
Standard Price: MYR 57.70- Days to Ship: 8 Day(s) -
Drafting Tool Triangular Scale
SINWASOKUTEI
A triangular scale used for creating drawings and reading dimensions.
[Features]
· Convenient for preparing and reading drawings that are required for registration procedures, such as land survey drawings and building floor plans. (A-15, A-30)
· Triangle scale provided with essential scales for architectural design. (B-15, B-30)
· A reduced copy of a drawing can be read at the original size. (C-15, C-30)
[Applications]
· For creating and reading drawings.Standard Price: MYR 42.80- Days to Ship: 8 Day(s) or more -
Fiber Folding Scale, Measuring Range 1000 mm-2000 mm
SINWASOKUTEI
[Features]
· Structure is filled with glass fiber, so it is light, doesn't rust, and doesn't conduct electricity.
· Large easy to read numbers.
· It has excellent workability since it clicks into place at 90°/180°.
· It is resistant to water and the scale is also durable.
· A foldable type convenient for carryingStandard Price: MYR 55.32- Days to Ship: 8 Day(s) or more -
Cast Iron Ruler Silver cm Display
SINWASOKUTEI
[Features]
· Used when manufacturing wooden forms or dies for cast metal, and when measuring die dimensions.
When casting, molten cast iron is poured into sand depressions to harden. The mold is made slightly larger as it expands and contracts at this stage.
The contraction percentage varies depending on the metal, size, and casting factory, so the appropriate casting measure for the expansion percentage is necessary.
· Silver processing suppresses the surface reflection to make the scale easy to read.
[Specifications]
· Material: Stainless SteelStandard Price: MYR 124.15- Days to Ship: 8 Day(s) or more -
Rigid Aluminum Ruler, with Cork Strip
SINWASOKUTEI
[Features]
· Sturdy aluminum straight scale with 50% more aluminum than "Alusuke."
· Large, vivid scale numerals have been adopted.
· Light, non-rusting, and durable.
· Cork board adhesive tape included.
· Shaped to prevent bleeding of ink.
[Applications]
· For measuring length, grooving, or cutting.Standard Price: MYR 65.56- Days to Ship: 8 Day(s) or more -
Aluminum Cutter Ruler, Lightweight Cutter
SINWASOKUTEI
[Features]
· It has a lightweight design and can be easily used by women as well.
· Large, vivid scale numerals have been adopted.
· Light, non-rusting, and durable.
· Comes with slip prevention rubber.
· The cutter surface has a thin stainless steel plate pasted on to help ensure that the blades do not catch.
· The type with handle uses a thin grip part that is easy to hold even for women with small hands.
[Applications]
· For measuring length and cutting.
· For adhering paper sliding doors and wallpaper.Standard Price: MYR 172.74- Days to Ship: 8 Day(s) -
Nobisuke 3x Magnification 2-Direction Measuring Type Metric Scale
SINWASOKUTEI
[Features]
· Expands to 3 times the length and can be read close by, enabling long distances to be measured easily with just one person.
· The stopper is plastic and will not damage the contacting areas.
· Large, easily readable scale numbers are adopted.
· 2-Direction Type
· As it is telescopic in both directions, it is held in the center. Thus it is particularly suitable for measuring inside dimensions by holding the center and extending the rod left and right.Standard Price: MYR 297.75- Days to Ship: 8 Day(s) or more -
SINWASOKUTEI
[Features]
· Made of bamboo which fits the hand well.
[Applications]
· Carpenters Square: For construction (also used for kimono tailoring in the Tohoku region of Japan).
· Cloth measure: For Japanese-style dressmaking.Standard Price: MYR 66.90- Days to Ship: 8 Day(s) -
Standard Price: MYR 66.15 Days to Ship: 8 Day(s) -
Standard Price: MYR 18.01 Days to Ship: 8 Day(s) -
SINWASOKUTEI
Straight ruler with JCSS calibration certificate.
[Features]
・Narrow and thin.
・Available in 5 sizes: 30cm, 60cm, 1m, 1.5m, and 2m, so you can choose according to your needs.
・JCSS calibration certificate is accepted as an equivalent calibration certificate among mutually recognized signing bodies and countries.
[Applications]
・Can be used to measure length.
・Ideal for measuring R-shaped dimensions and pasting on machines, etc.Standard Price: MYR 875.58 Days to Ship: 13 Day(s) or more -
Telescopic Ruler, Measure 1 Direction, Type II
SINWASOKUTEI
Telescopic-type straight ruler.
[Features]
· One-touch stopper lever for easy locking.
· Includes tape on the back for marking and taking notes.
· Includes a hook on the outside for performing external dimension measurement.
· Large caps on both ends and graduations close to the edges make it convenient for measuring and scribing.
[Applications]
· For measuring dimensions for interior finishing and installing fittings.Standard Price: MYR 314.76- Days to Ship: 8 Day(s)
| Brand |
|---|
| Product Series |
| Days to Ship |
| Measuring Range(mm) |
| Surface Finish |
| Scale gradation of the lower level(mm) |
| Scale gradation of the upper level(mm) |
| Material |
| Calibration |
| JIS |
| Calibration Certificate |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | SINWASOKUTEI | SINWASOKUTEI | SINWASOKUTEI | SINWASOKUTEI | SINWASOKUTEI | SINWASOKUTEI | SINWASOKUTEI | SINWASOKUTEI | SINWASOKUTEI | SINWASOKUTEI | SINWASOKUTEI | SINWASOKUTEI | SINWASOKUTEI | SINWASOKUTEI | SINWASOKUTEI | SINWASOKUTEI | SINWASOKUTEI | SINWASOKUTEI | SINWASOKUTEI | SINWASOKUTEI | SINWASOKUTEI | SINWASOKUTEI | SINWASOKUTEI | SINWASOKUTEI | SINWASOKUTEI | SINWASOKUTEI | SINWASOKUTEI | SINWASOKUTEI | SINWASOKUTEI | SINWASOKUTEI | SINWASOKUTEI | SINWASOKUTEI | SINWASOKUTEI | SINWASOKUTEI | SINWASOKUTEI |
| Product Series | Stainless Steel Straight Edge Warranty (Product Body and JCSS Calibration Certificate) | Nobisuke 3x Magnification 2-Direction Measuring Type Combination Scale | Nobisuke 3x Magnification 2-Direction Measuring Type Metric Scale | Component Nobisuke 3x Magnification 2-Direction Measuring Type | |||||||||||||||||||||||||||||||
| Days to Ship | 1 Day(s) or more | 1 Day(s) or more | 8 Day(s) or more | 7 Day(s) or more | 8 Day(s) | 1 Day(s) or more | 9 Day(s) | 8 Day(s) | 4 Day(s) or more | 8 Day(s) or more | 9 Day(s) | 8 Day(s) | 8 Day(s) | 24 Day(s) or more | 8 Day(s) or more | 1 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 9 Day(s) | 9 Day(s) or more | 4 Day(s) or more | 9 Day(s) | 7 Day(s) or more | 8 Day(s) | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) | 8 Day(s) or more | 8 Day(s) | 8 Day(s) | 8 Day(s) | 13 Day(s) or more | 8 Day(s) |
| Measuring Range(mm) | 150 ～ 3000 | 150 ～ 4000 | 150 ～ 1000 | 100 ～ 1000 | - | 300 ～ 2000 | 1,000 ～ 700 | 150 ～ 300 | 50 ～ 500 | 300 ～ 1000 | - | - | - | - | 1350 ～ 1950 | - | 150 | 600 ～ 2000 | 600 ～ 2000 | 1000 ～ 2000 | 600 ～ 2500 | 600 ～ 2000 | 1909 ～ 3636 | - | - | 1000 ～ 2000 | - | - | - | 364-970 ～ 1424-4091 | - | - | - | - | 461-970 ～ 1704-4699 |
| Surface Finish | Silver | Stainless Steel | Silver | Silver | - | Silver | - | Silver | - | - | - | - | - | - | - | - | Silver / Stainless Steel | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Scale gradation of the lower level(mm) | 0.5 ～ 1 | 0.5 ～ 1 | 1 | 1 | - | 0.5 ～ 1 | - | 0.5 | - | - | - | - | - | - | - | - | 1 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Scale gradation of the upper level(mm) | 1 / 0.5 up to 100 mm, Other: 1 | 1 / 0.5 up to 100 mm, Other: 1 | 1 | 1 | 1 | 1 | - | 1 | - | 1 | - | - | - | - | - | - | 1 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Material | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | - | Stainless Steel | Aluminum | Stainless Steel | Stainless Steel | Aluminum | Aluminum | - | - | - | - | Brass | Stainless Steel | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Resin | Resin | Resin | Stainless Steel | Aluminum | - | - | - | - | - | - | - |
| Calibration | Corresponds To | Corresponds To | - | Corresponds To | - | Corresponds To | - | Corresponds To | - | - | - | - | - | - | - | Non-Compatible | Non-Compatible | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| JIS | JIS1 Grade | JIS1 Grade | JIS1 Grade | JIS1 Grade | - | - | - | JIS1 Grade | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Calibration Certificate | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Measuring Range(mm)
- 0-2000
- 0-1500
- 0 to 150
- 0 to 300
- 0.1~300
- 0.1 to 600
- 0.1～1000
- 0.1～1500
- 0.1～2000
- 0.1～3000
- 0.1～4000
- 0.1～5000
- 0.1～6000
- 1,000
- 50
- 100
- 150
- 160
- 200
- 300
- 364-970
- 450
- 461-970
- 500
- 600
- 697-1909
- 700
- 810-2017
- 1000
- 1000-2818
- 1078-2821
- 1250
- 1273-3637
- 1350
- 1351-3640
- 1424-4091
- 1500
- 1502-4093
- 1704-4699
- 1909
- 1950
- 2000
- 2500
- 3000
- 3636
- 4000
-
Surface Finish
-
Scale gradation of the lower level(mm)
-
Scale gradation of the upper level(mm)
-
Material
-
Calibration
-
JIS
- JIS1 Grade
- JIS B7516
-
Calibration Certificate
- Yes
- No
Narrow search by specifying Manufacturer
-
- SINWASOKUTEI (35)
- NIIGATASEIKI (13)
- ESCO (10)
- AS ONE (3)
- TRUSCO NAKAYAMA (3)
- TOEIKOGYO (2)
- ENGINEER (1)
- MURATEC_KDS (1)
- TJM DESIGN (1)
- YAMAYO (1)
CAD
-
- 2D
- 3D
Related Categories to Straight Scale Rulers
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy