(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Pliers/Nippers/Pincers（Product Category：Pliers Page5）
| Days to Ship |
|
|---|
-
KNIPEX
[Features]
· Holes are included for cutting M2.6/3/3.5/4/5 copper or brass screws.
· Compatible terminal: Insulated terminal (215).
· This is a 6.3 mm open barrel terminal (215B).
· Bare terminal (215C).Standard Price: MYR 286.87- Days to Ship: 9 Day(s) -
KNIPEX
[Features]
· Holes are included for cutting M2.6/3/3.5/4/5 copper or brass screws.
· Insulated terminal plus 6.3 mm open barrel terminal.Standard Price: MYR 278.74 Days to Ship: 9 Day(s) -
Crimping pliers (for scotch lock connector)
KNIPEX
For crimping U-shaped contact single scotch connectors for telephone lines and signal cables.
[Features]
· For crimping single scotch connectors for telephone lines and signal cables.
· U-shaped part removes coating and coverings, so stripping (peeling) is not required.
· The side cutter has been carefully quenched.
· Compatible terminal: Single Scotch lock connector.
· Head finish: Polished.
· Handle Specification: Plastic CoatingStandard Price: MYR 502.12 Days to Ship: 18 Day(s) -
Grip Pliers for Welding 4224-280
KNIPEX
[Features]
· Enables plates, piping, etc., to be firmly gripped.
· Head finish: Nickel chrome plated.
· Handle Specification: Nickel Chrome PlatingStandard Price: MYR 434.21 Days to Ship: 8 Day(s) -
Grip Pliers for Welding 4234-280
KNIPEX
[Features]
· Enables plates, piping, etc., to be firmly gripped.
· Head finish: Nickel chrome plated.
· Handle Specification: Nickel Chrome PlatingStandard Price: MYR 421.54 Days to Ship: 8 Day(s) -
TSUNODA
The wide grip part makes it ideal for holding board.
Also, the grip is vinyl-coated to prevent slipping.Standard Price: MYR 82.68 Days to Ship: 11 Day(s) -
Standard Price: MYR 88.53 Days to Ship: 9 Day(s) -
Tapered Radio Pliers Bent Type FNP-125N
TSUNODA
The tip is bent, making it suitable for detailed work such as attaching and removing parts that you don't want to damage, or working on the tip.
Standard Price: MYR 77.06 Days to Ship: 11 Day(s) -
TSUNODA
Since there are no grooves in the jaw, you can grip flat, small, and fine objects and work on them without damaging them.
Standard Price: MYR 62.76 Days to Ship: 10 Day(s) -
SIGNET
[Features]
· These are a popular type of grip pliers with slim tips.
· Can be used in various places such as repair factories, construction sites, and general households.
· Common type with no locking nut.Standard Price: MYR 129.34 Days to Ship: 4 Day(s) or more -
SIGNET
Pinches to prevent liquid loss when removing rubber hoses used for fuel hoses, heater hoses, brake hoses, etc. Easy single-touch attaching/detaching.
Standard Price: MYR 154.66 Days to Ship: 4 Day(s) or more -
SIGNET
[Features]
· 3-piece light clamp set with total lengths of 150, 180, and 250 mm.
· The tip has a protrusion to prevent separating from the hose.Standard Price: MYR 185.05 Days to Ship: 10 Day(s) or more -
KEIBA
The tip claw has a back taper to catch the ring securely. Made of tough high-grade special steel SKS-3.
Standard Price: MYR 185.28 Days to Ship: 9 Day(s) -
TOP
Ideal for mounting and removal of lock nuts, hex bolts and nuts in wiring and piping work for electrical facilities. Wide range of uses, from electrical facilities to air conditioning construction work. Can be used to attach/detach various bolts or nuts.
[Features]
· The handle securely closes fully because there is no stopper.
· The large teeth allow thin steel conduit (nominal: C51) to be gripped firmly.
· Prevents tool drop or loss during work in elevated locations.
· The hole is forged and molded, and is integrated with the handle (resin is provided on the metal surface).
· There is sufficient strength.
· Triple layer is a sandwiched structure that suppresses occurrence of play even over long periods. Slim Design with No Protruding Caulking Pin. Induction quenched teeth have excellent abrasion resistance.
· Jaw opening is fine-tuned to 9-stage adjustment, enabling work at the optimum jaw width suited to the work.
· The soft grip is made of a soft material that reduces pain in the user's hand during use, even if the tool is squeezed tightly. Moreover, the embossed shape makes the surface of the tool unlikely to be slipperyStandard Price: MYR 203.63 Days to Ship: 8 Day(s) -
SMATO
[Features]
· Mini circular pliers that make round bending of copper wire easyStandard Price: MYR 64.05 Days to Ship: 3 Day(s) or more -
Mini Long Reach Bent Nose Pliers
SMATO
[Features]
· Reinforced Mini Long Nose Pliers with Curved Blade TipStandard Price: MYR 63.48 Days to Ship: 3 Day(s) or more -
Mini Flat Needle Nose Pliers, Overall Length: 130mm
SMATO
[Features]
· These are Mini Flat Long Nose Pliers with tips with a thin blade finish.Standard Price: MYR 71.35 Days to Ship: 2 Day(s) or more -
Mini Flat Needle Nose Pliers, Overall Length: 155mm
SMATO
[Features]
· Mini flat needle nose pliers that can work in deep areas.Standard Price: MYR 94.40 Days to Ship: 3 Day(s) or more -
Large Gear Type Snap Ring Pliers Replacement Chip
SMATO
[Features]
· Replacement tips for soft-grip snap ring pliers.
· The image shows the main body.Standard Price: MYR 121.36- Days to Ship: 3 Day(s) or more -
Precision Snap Ring Plier Set (Set of 4) 【4 Pieces Per Package】
KNIPEX
[Features]
· A 4-piece set of frequently used precision snap ring pliers for shafts and for holes
· Package design with high visual effect. (Has wide holes for hooks)
· Packaging material is a tough plastic that can also be used as tool trays within the tool cabinet.Standard Price: MYR 988.95 Days to Ship: 8 Day(s) -
KNIPEX
[Features]
· For gripping, tightening, and bending.
· This gripping surface is flat so it will not scratch the workpiece.
· Grasping with pliers eliminates play (looseness) that damages soft nuts and other cornered items.
· Push button allows for fine jaw width adjustment performed quickly and easily.
· With one pliers wrench, there is no need to carry many large wrenches.
· The grasping surface can always be moved in parallel, and can also be used for both metric and inch types.
· The unique head action enables movement like that of a ratchet handle for quick tightening and loosening of nuts.
· Flat jaw play enables continuous adjustment of grip throughout entire range up to the maximum opening width.
· The design capitalizes on the lever principle, and the 10-fold power increase added to the handle is also added to the jaw.
· Forged for exceptional sturdiness.
· Oil tempered and quenched chrome vanadium steel is used for the material.
· Enables much easier access in very tight spaces.
[Applications]
· Ideal for precision machinery work.Standard Price: MYR 522.14 Days to Ship: 8 Day(s) -
LOBTEX
[Features]
· Standard combination pliers with a transparent skeleton grip.
· The grips come in 6 different colors for convenient workplace tool management. (Green, red, blue, yellow, violet, smoke)
[Applications]
· Tightening and removing nuts and bolts.
· Cutting, twisting, bending and pulling wire.
· Bending thin sheet iron, etc.
· Opening and closing bottle caps, plugs, etc.
· Gripping items than cannot be gripped with hands.Standard Price: MYR 101.83 Days to Ship: 10 Day(s) -
SUPER TOOL
[Features]
· Can be used for a variety of purposes by professionals and at home including gripping, pinching, turning, and cutting.
· The blades can be used for cutting copper wires, steel wires, nails, etc.
· The opening can be adjusted to 2 settings.
[Applications]
· For gripping, pinching, turning and cuttingStandard Price: MYR 128.15 Days to Ship: 9 Day(s) -
Nose Ergo Pliers (Electrostatic Discharge Type)
LINDSTROM
[Specifications]
·It is suitable for detailed work using accessories, etc.
·Main body material: special tool steel
·Grip materials: ResinStandard Price: MYR 317.50- Days to Ship: 5 Day(s) or more -
Precision ERGO Plier (Anti-static Type)
LINDSTROM
[Features]
·The ergo grip makes it less prone to tendonitis and helps prevent injuries.
·You can adjust the width according to your hand size.
[Applications]
·Electronic precision work.
[Materials]
·Cutting Edge Hardness HRC42-46 Induction Quenching
·Grip: plastic, rubberStandard Price: MYR 426.57- Days to Ship: 5 Day(s) or more -
NEJIANGUIRUS Tri-Grip Pliers Type
LOBTEX
[Features]
· Includes a handy function for removing small screws.
· The gripping jaws are designed with a special asymmetric shape which securely grips target objects at 3-points.
· The pivot shaft is completely flat on both sides, allowing for unobstructed work, even in tight places.
[Applications]
· Various types of on-site workStandard Price: MYR 119.03 Days to Ship: 9 Day(s) -
TONE
[Features]
· The reverse tapered tips allow for securely holding of a snap ring.
· The non-slip grip is soft to the touch and can be comfortably gripped.
· They are made with a cast and designed to be highly resistance to deterioration, bending or damage due to wear.Standard Price: MYR 116.44- Days to Ship: 9 Day(s) or more -
TONE
[Features]
· Ideal for clamping a pipe or a round object.
· Can be used as a wire cutter.Standard Price: MYR 73.31- Days to Ship: 9 Day(s) -
TONE
[Features]
· Ideal for clamping a plate, a square bar and a flat object.Standard Price: MYR 99.57- Days to Ship: 9 Day(s) or more -
GRIPONTOOLS
A variety of the most frequently used grip pliers combined in one compact set.
[Features]
· The epoxy resin coating is 10 times more resistant to corrosion compared to nickel plating.Standard Price: MYR 847.95- Days to Ship: 8 Day(s) -
GRIPONTOOLS
Grip Pliers Set that provides a set of 2 Multi Grip Pliers and 2 Grip Holders.
[Features]
· Offers a set of fixed-type pliers.
· Pliers with an epoxy resin coating that is 10 times more resistant to corrosion compared to nickel plating.
· You can attach the grip pliers to a table, etc. and use them as a stationary device.
· Storage bag included.
[Applications]
· Perfect for using grip pliers affixed to a table.Standard Price: MYR 584.41 Days to Ship: 8 Day(s) -
Grip Pliers, Overall Length 135 To 300 mm
GRIPONTOOLS
Special high-quality grip pliers for sheet metal, made in Spain.
[Features]
· The epoxy resin coating is 10 times more resistant to corrosion compared to nickel plating.
· Standard type with a straight tip shape, a thin blade and good usability.
· Available in 4 sizes of maximum openings: 30, 42, 63 and 75 mm.
· The material is forged steel, with an epoxy resin finish.
[Applications]
· Can be used for sheet metal and welding.Standard Price: MYR 125.01- Days to Ship: 8 Day(s) -
Straight Grip Pliers, Overall Length 135 To 300 mm
GRIPONTOOLS
Special high-quality grip pliers for sheet metal, made in Spain.
[Features]
· The epoxy resin coating is 10 times more resistant to corrosion compared to nickel plating.
· The tip shape has a straight specification.
· Available in 4 sizes of maximum openings: 30, 42, 63 and 75 mm.
· The material is forged steel, with an epoxy resin finish.
[Applications]
· Can be used for sheet metal and welding.Standard Price: MYR 115.79- Days to Ship: 9 Day(s) -
Chain Pipe Cutter, Overall Length 250 mm / 300 mm
GRIPONTOOLS
High-quality special chain pipe cutter for sheet metal, made in Spain.
[Features]
· You can choose from 2 sizes of overall lengths, 250 mm and 300 mm, according to the application.
· The epoxy resin coating is 10 times more resistant to corrosion compared to nickel plating.
· The ratchet mechanism makes it possible to cut pipes smoothly and with little effort.
[Applications]
· Perfect to use when cutting pipes, etc.Standard Price: MYR 692.03 Days to Ship: 8 Day(s) -
TONE
[Features]
· Ideal for work in tight spaces and work that requires precision.
· Can be used as a wire cutter.Standard Price: MYR 109.92- Days to Ship: 9 Day(s) -
Standard Price: MYR 151.48 Days to Ship: 9 Day(s) -
Standard Price: MYR 173.84 Days to Ship: 9 Day(s) -
TONE
[Features]
· Wide opening with deep jaws make this product ideal for angled/channel clamping.Standard Price: MYR 110.97- Days to Ship: 9 Day(s) or more -
TONE
[Features]
· The clamp section can be adjusted freely to allow for clamping of tilted objects.Standard Price: MYR 118.14- Days to Ship: 9 Day(s) or more -
GRIPONTOOLS
[Features]
· You can fix the grip pliers on a table or the like and use it as a stationary device.Standard Price: MYR 119.17- Days to Ship: 8 Day(s) -
ENGINEER
An elastomer grip that is environmentally friendly and easy to grip has been adopted for these pliers that are even capable of removing truss screws with stripped heads.
[Features]
· The tip of the new design also accommodates low head screws, and holds the screw further firmly by adjusting the bite angle of the screw.
· By mounting the blade part, they can also be used as cutting pliers.
· Includes a spring for easy continuous operation and is equipped with an elastomer design grip that is gentle on both the hands and the environment.
· The lightweight T-type grip provides more resistance to torsion, and enables it to grasp the head of the small screw that cannot be removed.
· A rescue tool for screw troubles, essential for field maintenance.
· Made of high carbon steel.
[Applications]
· Usable for tightening and removing screws with stripped heads, rusted screws and specially shaped screws.Standard Price: MYR 137.57 Days to Ship: 9 Day(s) -
ENGINEER
Longnose pliers type Neji-Saurus can remove screws in narrow, deep locations.
[Features]
· Uses "gear teeth" that can reliably grasp thin objects such as shim plates.
· T-shaped grip cross section, lightweight to prevent grip torsion.
· Thin wires can also be cut easily with little force.
[Applications]
· Optimal for removal of stripped screws or special screws, etc., in narrow, deep locations.Standard Price: MYR 146.61 Days to Ship: 9 Day(s) -
Standard Price: MYR 76.24 Days to Ship: 11 Day(s) -
Standard Price: MYR 184.01 Days to Ship: 8 Day(s) -
MITOLOY
[Features]
· It has a removable tip claw.
· The tip claw shape reliably catches rings due to it being back-tapered.
[Image]
· From top, the model numbers are SSP-175, SBP-175, HSP-175 and HBP-175.Standard Price: MYR 152.61- Days to Ship: 11 Day(s)
| Brand |
|---|
| Product Series |
| Days to Ship |
| Product Category |
| Plier Type |
| Plier Type |
| Nipper Type |
| Overall Length(mm) |
| Shaft/hole |
| With or without Spring |
| Steel Wire Cutting Performance(φ/mm) |
| Copper Wire Cutting Performance(φ/mm) |
| Piano Wire Cutting Performance(φ/mm) |
| Plastic Cutting Performance(φ/mm) |
| Stranded Wire Cutting Ability(φ/mm) |
| Stainless steel cutting ability(φ/mm) |
| VA (VVF) Wire Cutting Capacity(φ/mm) |
| With/without tip claw replacement function |
| Tip claw diameter(mm) |
| Compatible Ring Size(mm) |
| Parts Type |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | KNIPEX | KNIPEX | KNIPEX | KNIPEX | KNIPEX | TSUNODA | TSUNODA | TSUNODA | TSUNODA | SIGNET | SIGNET | SIGNET | KEIBA | TOP | SMATO | SMATO | SMATO | SMATO | SMATO | KNIPEX | KNIPEX | LOBTEX | SUPER TOOL | LINDSTROM | LINDSTROM | LOBTEX | TONE | TONE | TONE | GRIPONTOOLS | GRIPONTOOLS | GRIPONTOOLS | GRIPONTOOLS | GRIPONTOOLS | TONE | TONE | TONE | TONE | TONE | GRIPONTOOLS | ENGINEER | ENGINEER | MITOLOY | MITOLOY | MITOLOY |
| Product Series | Precision Snap Ring Plier Set (Set of 4) 【4 Pieces Per Package】 | ||||||||||||||||||||||||||||||||||||||||||||
| Days to Ship | 9 Day(s) | 9 Day(s) | 18 Day(s) | 8 Day(s) | 8 Day(s) | 11 Day(s) | 9 Day(s) | 11 Day(s) | 10 Day(s) | 4 Day(s) or more | 4 Day(s) or more | 10 Day(s) or more | 9 Day(s) | 8 Day(s) | 3 Day(s) or more | 3 Day(s) or more | 2 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 8 Day(s) | 8 Day(s) | 10 Day(s) | 9 Day(s) | 5 Day(s) or more | 5 Day(s) or more | 9 Day(s) | 9 Day(s) or more | 9 Day(s) | 9 Day(s) or more | 8 Day(s) | 8 Day(s) | 8 Day(s) | 9 Day(s) | 8 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) or more | 9 Day(s) or more | 8 Day(s) | 9 Day(s) | 9 Day(s) | 11 Day(s) | 8 Day(s) | 11 Day(s) |
| Product Category | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers |
| Plier Type | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Retaining Ring Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | - | Retaining Ring Pliers | Pliers | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Pliers | - | Pliers | Retaining Ring Pliers | Retaining Ring Pliers |
| Plier Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Nipper Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Overall Length(mm) | 215 | 240 | 155 | 280 | 280 | 210 | 160 | 132 | 118 | 135 | 250 | - | 169 | 260 | 124 | 115 | 130 | 155 | - | - | 125 | 202 | 250 | 120 ～ 132 | 146.5 ～ 158.5 | 203 | 130 ～ 210 | 143 ～ 193 | 183 ～ 227 | - | - | 135 ～ 300 | 135 ～ 300 | 300 | 167 ～ 220 | 194 | 228 | 179 ～ 443 | 180 ～ 455 | 135 | 160 | 190 | 166 | 143 | 169 ～ 176 |
| Shaft/hole | - | - | - | - | - | - | - | - | - | - | - | - | For Shaft | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Use with both shaft and hole | - |
| With or without Spring | - | - | Available | - | - | NA | Available | Available | Available | Available | - | NA | Available | NA | Available | Available | Available | Available | - | - | - | - | - | Available | Available | - | Available | - | - | - | - | - | - | - | - | - | - | - | - | - | Available | NA | NA | Available | Available |
| Steel Wire Cutting Performance(φ/mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Copper Wire Cutting Performance(φ/mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1.2 | 1.2 | - | - | - |
| Piano Wire Cutting Performance(φ/mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Plastic Cutting Performance(φ/mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Stranded Wire Cutting Ability(φ/mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Stainless steel cutting ability(φ/mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| VA (VVF) Wire Cutting Capacity(φ/mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| With/without tip claw replacement function | - | - | - | - | - | - | - | - | - | - | - | - | Available | NA | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | NA | NA | Available |
| Tip claw diameter(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.9 ～ 2.3 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Compatible Ring Size(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Parts Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Snap ring plier tip claw | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Product Category
- Pliers
- Pliers
- Nippers
- Parts
-
Plier Type
- Pliers
- Retaining Ring Pliers
-
Plier Type
- Pliers
- Lead Pliers
- Longnose pliers
-
Nipper Type
- Nippers
- Heat Nippers
-
Overall Length(mm)
- 36
- 46
- 100
- 102
- 102.5
- 104
- 105
- 106
- 108
- 109
- 110
- 111.5
- 112
- 112.5
- 113.5
- 115
- 116
- 117
- 117.5
- 118
- 120
- 122
- 123
- 124
- 125
- 125.5
- 126
- 127
- 128
- 128.5
- 129
- 130
- 131
- 132
- 132.5
- 133
- 133.5
- 134
- 134.5
- 135
- 135.5
- 136
- 138
- 139
- 140
- 141
- 142
- 143
- 144
- 144.5
- 145
- 146
- 146.5
- 147
- 148
- 149
- 150
- 151
- 152
- Approx. 152
- 152.5
- 153
- 154
- 154.5
- 155
- 155.5
- 156
- 157
- 158
- 158.5
- 159
- 160
- 161
- 162
- 163
- 164
- 165
- 166
- 167
- 167.5
- 168
- 169
- 170
- 171
- 172
- 173
- 174
- 175
- 176
- 177
- 178
- 179
- 180
- 181
- 183
- 185
- 186
- 187
- 187.5
- 188
- 189
- 190
- 192
- 193
- 194
- 195
- 197
- 199
- 200
- Approx. 200
- 201
- 201.5
- 202
- 203
- 204
- 205
- 206
- 208
- 210
- 212
- 213
- 214.5
- 215
- 216
- 217
- 219
- 220
- 223
- 223.5
- 224
- 225
- 227
- 228
- 229
- 230
- 232
- 235
- 236
- 240
- 241
- 242
- 245
- 249
- 250
- 252
- 253
- 260
- 265
- 266
- 275
- Approximately 275
- 280
- 285
- Approximately 285
- 287
- 290
- 297
- 300
- 305
- 310
- 320
- 370
- 380
- 400
- 443
- 455
- 465
- 560
- 570
- 580
- 590
- 600
- 620
- 770
- 920
-
Shaft/hole
- For Shaft
- For Hole
- Use with both shaft and hole
-
With or without Spring
- Available
- NA
-
Steel Wire Cutting Performance(φ/mm)
-
Copper Wire Cutting Performance(φ/mm)
- 0.10～0.60
- 0.10～0.65
- 0.1～0.80
- 0.10～0.80
- 0.1 to 1.00
- 0.10 to 1.00
- 0.1～1.25
- 0.10～1.25
- 0.13-1.2
- 0.18-1.6
- 0.18～0.8
- 0.2～0.80
- 0.20～0.80
- 0.2～1.00
- 0.20～1.00
- 0.2～1.20
- 0.20～1.20
- 0.20～1.25
- 0.2～1.60
- 0.20～1.60
- 0.2 to 2
- 0.2 to 2.3
- 0.3～1.60
- 0.30～1.60
- 0.3～2.00
- 0.30～2.00
- 0.35～0.80
- 0.35～1.00
- 0.35 to 1.25
- 0.4～2.00
- 0.40～2.00
- 0.6
- 0.8
- 0.9
- 1
- 1.00～0.80
- 1.2
- Tip blade: 1.2 or less, Side blade: 1.2 or less
- 1.25
- 1.3
- 1.4
- 1.5
- 1.6
- 1.8
- 2
- 2.3
- 2.5
- 2.6
- 2.8
- 2.9
- 3
- 3.2
- 3.3
- 3.5
- 3.6
- 4
- 4.5
- 5
- 8.0
- 10
- 11.5
- 12
- 13
- 14
- 15
- -
-
Piano Wire Cutting Performance(φ/mm)
-
Plastic Cutting Performance(φ/mm)
-
Stranded Wire Cutting Ability(φ/mm)
-
Stainless steel cutting ability(φ/mm)
-
VA (VVF) Wire Cutting Capacity(φ/mm)
-
With/without tip claw replacement function
- Available
- NA
-
Tip claw diameter(mm)
-
Compatible Ring Size(mm)
-
Parts Type
- Blade Tip
- Spring
- Snap ring plier tip claw
Narrow search by specifying Manufacturer
-
- KNIPEX (98)
- TRUSCO NAKAYAMA (29)
- LOBTEX (16)
- KTC(KYOTO TOOL) (15)
- MUROMOTO TEKKO (15)
- TONE (14)
- TOP (14)
- WIHA (8)
- ENGINEER (7)
- GRIPONTOOLS (6)
- IGARASHIPLIERS (6)
- MITOLOY (6)
- SMATO (5)
- SIGNET (5)
- SUPER TOOL (5)
- E VALUE (4)
- HOZAN (4)
- TSUNODA (4)
- FUJIYA (3)
- LINDSTROM (2)
- 3PEAKS (2)
- ARC GREATTOOL (1)
- ARC (1)
- KEIBA (1)
- ANEX (0)
- H & H (0)
- AS ONE (0)
- GOOT (0)
- Ｍ＆Ｍ (0)
- NEPROS (0)
- TRAD (0)
- HAZET (0)
- HANAZONO TOOL (0)
- ESCO (0)
CAD
-
- 2D
- 3D
Related Categories to Pliers/Nippers/Pincers
-
- Wrenches / Offset Wrenches / Ratchet Wrenches
- Hex Wrenches
- Monkey Wrenches
- Torx Wrenches
- Socket Wrenches
- Torque Wrenches
- Screwdrivers
- Torque Screwdrivers
- Pliers/Nippers/Pincers
- Hammers
- Tool Sets / Tool Boxes
- Cutter Knives
- Chisels
- Screwdriver Bits
- Socket Bits
- Crowbars
- Pullers
- Tweezers
- Engravers/Punches
- Vehicle Maintenance Tools
- Tools for Water Supply Faucets and Air-Conditioning Piping
- Cutting Tools
- Insulation Tools
- Sheet Metal Tools
- Explosion-Proof Hand Tools
- Caulking Tools
- Tools Used at Electric Facilities
- Crowbars
-
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy