(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Screwdrivers（Page11）
| Days to Ship |
|
|---|
-
WERA
The lasered tip provides exceptional bite into screws. Special grip design provides an easy grip and comfortable fit. White carton specifications.
Standard Price: MYR 698.35 Days to Ship: 8 Day(s) -
Micro Screwdriver Set - 12 pcs
WERA
Uses a handle based on ergonomic design which is easy to carry, rotate and transmits torque reliably.
Standard Price: MYR 774.43 Days to Ship: 5 Day(s) or more -
WERA
Uses a handle based on ergonomic design which is easy to carry, rotate and transmits torque reliably.
Standard Price: MYR 386.90 Days to Ship: 5 Day(s) or more -
Interchangeable ESD Micro Screwdriver (Anti-static Type)
WERA
The product conforms to European Standards EN100-015-1 as the optimal precision screwdriver for assembly of precision electric equipment. Uses a handle based on ergonomic design which is easy to carry, rotate and transmits torque reliably.
Standard Price: MYR 272.25- Days to Ship: 8 Day(s) or more -
Standard Price: MYR 127.64 Days to Ship: 9 Day(s) -
Craft Form Compact VARIO _Handle, Total Length: 115mm
WERA
This is a ratchet handle for insertion blades.
Standard Price: MYR 307.21 Days to Ship: 8 Day(s) -
Standard Price: MYR 77.78- Days to Ship: 8 Day(s) or more -
Standard Price: MYR 122.65 Days to Ship: 8 Day(s) or more -
WERA
1,000 V insulation specifications. This product conforms to European Standard EN60900.
Standard Price: MYR 40.70- Days to Ship: 5 Day(s) or more -
Craft Form Compact VDE _Handle
WERA
1,000 V insulation specifications. This product conforms to European Standard EN60900. Special grip design provides an easy grip and comfortable fit.
Standard Price: MYR 243.60 Days to Ship: 5 Day(s) -
WERA
Body center part opens when tail part is pushed, then bits inside can be replaced for use.
Standard Price: MYR 562.40 Days to Ship: 8 Day(s) -
WERA
Replacement drivers are collected in a compact, convenient, hand-held case.
Standard Price: MYR 888.42 Days to Ship: 5 Day(s) or more -
WERA
The shaft section is flexible, so it's suitable for work in tight spaces.
Standard Price: MYR 289.42 Days to Ship: 9 Day(s) -
ESD Bit Holder (Anti-Static Type)
WERA
A bit holder that conforms to European Standards EN100-015-1.
Standard Price: MYR 199.58 Days to Ship: 9 Day(s) -
WERA
Ratchet driver bit holder.
[Features]
・ It allows you to tighten screws straight.
・ The ergonomically designed handle helps generate greater torque.
·Angle of rotation: 8°.
·Equipped with a switch for tightening direction.
・ Bits can be inserted without pushing the sleeve of the holder forward.
·The holder sleeve rotates freely.
・ Bits can be exchanged with one hand.
·The kraft foam handle is easy to grip and transmits power.Standard Price: MYR 425.94 Days to Ship: 9 Day(s) -
WERA
As the tip has a ballpoint specification, hex socket head cap bolts, and so on, can be turned even if the screwdriver is inclined slightly at an angle. Special grip design provides an easy grip and comfortable fit.
Standard Price: MYR 57.16- Days to Ship: 8 Day(s) or more -
WERA
Special grip design provides an easy grip and comfortable fit. Wera's proprietary Torx® HF shape fits Torx® screws perfectly.
Standard Price: MYR 139.35- Days to Ship: 8 Day(s) or more -
Stubby Ratchet Screwdriver 52380
SIGNET
The number of gear teeth is 60. Rotates smoothly, with excellent workability. It is a short ratchet driver that's ideal for narrow spaces. Uses anti-slip elastomer resin with which force can be easily applied.
Standard Price: MYR 95.37 Days to Ship: 4 Day(s) or more -
SIGNET
[Features]
· Easy to grip ergonomic handle reduces fatigue.
· With base hexagon, a wrench can be applied for rotation.
· A through type with a grip end that has a striking area, which is ideal for removing fixed screws.Standard Price: MYR 66.00- Days to Ship: 4 Day(s) or more -
LED Electrical Screwdriver D-745
HOZAN
An LED type inspection screwdriver with high visibility.
[Features]
· Batteries can be changed.
· Applicable ranges: 100 to 240 VAC, tip size of 2.5 x 0.6 mm, total length of 139 mm, shaft length of 17 mm, shaft diameter of 2.5 mm.
· Handle diameter 16 mm, weight 23 g.
· Be sure to check the light before use.
· Be careful of short circuit and electric shock.
[Applications]
· Used for determining AC polarity and checking electrical conductance.
· Can be used within the applicable range.Standard Price: MYR 42.66 Days to Ship: 5 Day(s) or more -
Screwdriver Set for Voltage Detection Replacement Set of 6 (for Low Voltage)
VESSEL
For voltage testing and maintenance of electrical products and distribution boards in general households or industry.
Standard Price: MYR 74.89 Days to Ship: 5 Day(s) or more -
TRUSCO NAKAYAMA
[Features]
· Ideal for attaching and detaching fine screws for eyeglasses.Standard Price: MYR 35.99 Days to Ship: 9 Day(s) -
TRUSCO NAKAYAMA
[Features]
· The ratchet mechanism enables fast turning in tight spaces.Standard Price: MYR 35.99 Days to Ship: 9 Day(s) or more -
TRUSCO NAKAYAMA
[Features]
· The ratchet mechanism enables fast turning in tight spaces.
· Ultra-short design that allows the turning of hexagon bolts in narrow locations.Standard Price: MYR 97.60 Days to Ship: 5 Day(s) or more -
TRUSCO NAKAYAMA
[Features]
· The magnet can hold the bit.
· The bit can be elongated for use with the mounting of a replacement handle.Standard Price: MYR 33.52 Days to Ship: 9 Day(s) or more -
T-Shaped Ratchet Screwdriver Set
TRUSCO NAKAYAMA
[Features]
· A ratchet mechanism is included, which turns the screw just by a repetitive motion of the wrist, without the need to re-grip the handle.Standard Price: MYR 172.95 Days to Ship: 5 Day(s) or more -
TRUSCO NAKAYAMA
[Features]
· A ratchet mechanism is included, which turns the screw just by a repetitive motion of the wrist, without the need to re-grip the handle.Standard Price: MYR 45.81 Days to Ship: 5 Day(s) or more -
TRUSCO NAKAYAMA
[Features]
· A bit with shaft diameter of 6.35 mm.
· Can also be used on ratchet screwdrivers.Standard Price: MYR 15.71 Days to Ship: 9 Day(s) -
TRUSCO NAKAYAMA
[Features]
· A bit with shaft diameter of 6.35 mm.
· Can also be used on ratchet screwdrivers.Standard Price: MYR 14.61- Days to Ship: 9 Day(s) -
TRUSCO NAKAYAMA
[Features]
· Ultra-short design that allows the turning of hexagon bolts in narrow locations.
· A bit with shaft diameter of 6.35 mm.
· Can also be used on ratchet screwdrivers.Standard Price: MYR 22.90- Days to Ship: 9 Day(s) or more -
TRUSCO NAKAYAMA
[Features]
· A bit with hexagonal tip.
· A bit with shaft diameter of 6.35 mm.
· Can also be used on ratchet screwdrivers.Standard Price: MYR 16.54- Days to Ship: 9 Day(s) -
ANEX
[Features]
· Includes a ratchet mechanism that enables one tool to be used for three types of Phillips head screws.Standard Price: MYR 57.19 Days to Ship: 8 Day(s) -
Standard Price: MYR 8.71- Days to Ship: 5 Day(s) or more -
Standard Price: MYR 9.83 Days to Ship: 8 Day(s) -
Precision Pin Vise (Throughput Type)
ANEX
[Features]
· A pin vise resistant to wear with an iron cap and chuck.Standard Price: MYR 62.85- Days to Ship: 9 Day(s) -
Standard Price: MYR 98.52 Days to Ship: 9 Day(s) -
Precision Pin Vise (Storable Type) with Drill
ANEX
[Features]
· A storage type pin vise ideal for drilling small holes and deburring.Standard Price: MYR 77.93 Days to Ship: 9 Day(s) -
Stepped Magnetic Catch MINI【2 Pieces Per Package】
ANEX
[Features]
· Firmly catches screws without dropping them due to the heavy duty magnet.Standard Price: MYR 35.95 Days to Ship: 9 Day(s) -
Heavy Duty Magnetic Screw Catch Rod
ANEX
[Features]
· The screwdriver shaft can be attached and securely catches screws.Standard Price: MYR 27.98 Days to Ship: 8 Day(s) -
ANEX
[Features]
· Firmly catches screws without dropping them due to the heavy duty magnet.Standard Price: MYR 27.23 Days to Ship: 12 Day(s) -
Band Pulling Pin Tool for Watch【1-5 Pieces Per Package】
ANEX
[Features]
· Suitable for adjusting metal wristwatch bands.Standard Price: MYR 16.26- Days to Ship: 8 Day(s) or more -
Standard Price: MYR 37.10 Days to Ship: 12 Day(s) -
Standard Price: MYR 22.66 Days to Ship: 9 Day(s) -
Replacement Stubby Ratchet Screwdriver【695 Pieces Per Package】
ANEX
[Features]
· Rotates smoothly, with excellent workability.Standard Price: MYR 76.48 Days to Ship: 12 Day(s) -
Standard Price: MYR 16.08 Days to Ship: 8 Day(s)
| Brand |
|---|
| Product Series |
| Days to Ship |
| Tip standards |
| Tip size / Phillips (+) |
| Tip size / flathead (-) blade width (mm) B1 |
| Shaft length L (mm) |
| Single Product/Set Classification |
| Shaft type |
| Magnet |
| Shaft through |
| Bolster |
| Grip Type |
| Tip size / flathead (-) blade thickness (mm) B2 |
| (Box/Hex/Ball-Point) Width Across Flats (mm) |
| (Box/Hex/Ball-Point) Width Across Flats (inch) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | WERA | WERA | WERA | WERA | WERA | WERA | WERA | WERA | WERA | WERA | WERA | WERA | WERA | WERA | WERA | WERA | WERA | SIGNET | SIGNET | HOZAN | VESSEL | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX |
| Product Series | Screwdriver Set for Voltage Detection Replacement Set of 6 (for Low Voltage) | Replacement Stubby Ratchet Screwdriver【695 Pieces Per Package】 | |||||||||||||||||||||||||||||||||||||||||||
| Days to Ship | 8 Day(s) | 5 Day(s) or more | 5 Day(s) or more | 8 Day(s) or more | 9 Day(s) | 8 Day(s) | 8 Day(s) or more | 8 Day(s) or more | 5 Day(s) or more | 5 Day(s) | 8 Day(s) | 5 Day(s) or more | 9 Day(s) | 9 Day(s) | 9 Day(s) | 8 Day(s) or more | 8 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 9 Day(s) | 9 Day(s) or more | 5 Day(s) or more | 9 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 9 Day(s) | 9 Day(s) | 9 Day(s) or more | 9 Day(s) | 8 Day(s) | 5 Day(s) or more | 8 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 8 Day(s) | 12 Day(s) | 8 Day(s) or more | 12 Day(s) | 9 Day(s) | 12 Day(s) | 8 Day(s) |
| Tip standards | Combination | Combination | Phillips (+)/Flathead(-) | Combination | - | - | Flathead (-) / Phillips (+)/Flathead(-) / Torx / Hexagon | - | Phillips (+) / Flathead (-) / Torx / Hexagon | - | Combination | Combination | - | - | - | Ballpoint | Torx | Phillips (+)/Flathead(-) | Flathead (-) | Flathead (-) | Combination | Phillips (+)/Flathead(-) | Other | Box | Other | Combination | Other | Phillips (+)/Flathead(-) | Phillips (+) / Flathead (-) | Box | Hexagon | Combination | Phillips (+) | Flathead (-) | Other | Other | Other | Other | Other | Other | Other | Other | Other | Phillips (+)/Flathead(-) | Other |
| Tip size / Phillips (+) | No.1 / No.2 / No.3 | No.00 / No.0 | No.00 / No.0 | No.00 / No.0 / No.1 | - | - | No.1 / No.2 / No.3 | - | No.1 | - | No.1 / No.2 | No.1 / No.2 / No.3 | - | - | - | - | - | No.2 | - | - | No.1 / No.2 | No.00 | - | - | - | No.1 / No.2 / No.3 | - | No.2 | No.1 / No.2 / No.3 | - | - | No.1 / No.2 / No.3 / Other | No.0 | - | - | - | - | - | - | - | - | - | - | No.2 | - |
| Tip size / flathead (-) blade width (mm) B1 | 6 ～ 8 | 1.5 ～ 3 | 1.2 ～ 3 | 1.5 ～ 3 | - | - | 4 ～ 7 | - | 3 ～ 6.5 | - | 5.5 ～ 6.5 | 5.5 ～ 8 | - | - | - | - | - | 6 | 5.5 ～ 8 | 2.5 | 4 ～ 6 | 1.8 | - | - | - | 4 ～ 7 | - | 6 | 4 ～ 7 | - | - | - | - | 2.5 | - | - | - | - | - | - | - | - | - | 30 | - |
| Shaft length L (mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 60 ～ 150 | 300 | - | 75 ～ 150 | 17 | - | 11 | - | - | - | - | - | - | - | - | - | - | 50 ～ 100 | 100 | - | - | - | - | - | - | - | - | - | - | 150 |
| Single Product/Set Classification | Set Product | Set Product | Set Product | Single Item / Set Product | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Set Product | Set Product | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Set Product | Single Item | Single Item | Set Product | Single Item | Set Product | Single Item | Single Item | Single Item | Single Item | Single Item | Set Product | Single Item | Single Item | Single Item | Single Item | Set Product | Set Product | Single Item | Single Item | Set Product | Single Item | Single Item | Single Item | Single Item |
| Shaft type | Round | Round | Round | - | - | - | Round | - | Round | - | Round | Round | - | - | - | Round | Round | - | Round | Round | - | Round | - | - | - | - | - | - | - | - | - | - | Round | Round | Round | Round | - | - | Round | - | - | Round | - | Round | Round |
| Magnet | NA | NA | NA | NA | - | - | NA | - | NA | - | NA | NA | - | - | - | NA | NA | NA | NA | NA | - | NA | - | - | Available | - | - | NA | NA | NA | NA | - | NA | NA | - | NA | - | - | Available | - | - | - | - | NA | NA |
| Shaft through | NA | NA | NA | - | - | - | - | - | NA | - | - | - | - | - | - | NA | NA | - | Available | NA | - | - | - | - | - | - | - | - | - | - | - | - | NA | NA | - | - | - | - | - | - | - | - | - | NA | NA |
| Bolster | NA | NA | NA | - | - | - | - | - | NA | - | - | - | - | - | - | NA | NA | - | NA | NA | - | - | - | - | - | - | - | - | - | - | - | - | NA | NA | - | - | - | - | - | - | - | - | - | NA | NA |
| Grip Type | Rubber | Rubber | Rubber | Rubber | Rubber | Rubber | - | Rubber | - | Rubber | Rubber | Rubber | Rubber | Rubber | Rubber | Rubber | Rubber | Resin | Resin | Resin | Resin | - | - | - | - | - | - | - | - | - | - | - | Resin | Resin | - | - | - | - | - | - | - | - | - | Resin | Resin |
| Tip size / flathead (-) blade thickness (mm) B2 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.75 ～ 1.1 | 0.6 | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.4 | - | - | - | - | - | - | - | - | - | 6 | - |
| (Box/Hex/Ball-Point) Width Across Flats (mm) | 8 ～ 10 | 0.9 ～ 2 | - | 1.5 ～ 2 | - | - | 3 ～ 6 | - | 2.5 ～ 6 | - | 6 | 3 ～ 5 | - | - | - | 1.5 ～ 12 | - | - | - | - | - | - | - | 5.5 ～ 12 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| (Box/Hex/Ball-Point) Width Across Flats (inch) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Tip standards
-
Tip size / Phillips (+)
-
Tip size / flathead (-) blade width (mm) B1
- 0.6
- 0.7
- 0.8
- 0.9
- 1
- 1.2
- 1.2、1.8、2.3
- 1.2、1.8、2.4、3.0
- 1.3
- 1.35
- 1.4
- 1.5
- 1.5, 2.0, 3.0
- 1.6
- 1.8
- 1.9
- 1.95
- 2
- 2.1
- 2.3
- 2.4
- 2.5
- 2.5、3.0、4.0
- 2.6
- 2.65
- 3
- 3.1
- 3.4
- 3.5
- 3.6
- 4
- 4 × 6
- 4.3
- 4.5
- 4.5, 5.5, 7.0
- 4.5、6.0
- 4.9
- 5
- 5.5
- 6
- 6.25
- 6.3
- 6.35
- 6.5
- 7
- 7, 9, 12
- 7.2
- 8
- 8, 9, 10, 12, 14
- 9
- 9, 11
- 9.5
- 10
- 11
- 12
- 13
- 14
- 16
- 18
- 30
-
Shaft length L (mm)
- 5
- 9
- 10
- 11
- 13
- 14
- 15
- 16
- 17
- 18
- 18～90
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 28
- 30
- 35
- 36
- 38
- 40
- 41
- 45
- 50
- 51
- 57
- 60
- 60, 75, 80
- 60, 80, 100
- 65
- 66
- 67
- 70
- 75
- 75 (PGMD-075), 100 (PGMD-100), 25 (PGSD-M2), 75 (PGPD-001), 100 (PGPD-002), 150 (PGPD-003), 25 (PGSD-P2)
- 75 (PGMD-075), 100 (PGMD-100), 150 (PGMD-150), 25 (PGSD-M2), 75 (PGPD-001), 100 (PGPD-002), 150 (PGPD-003), 25 (PGSD-P2)
- 75 (PGMD-075), 100 (PGMD-100), 150 (PGMD-150), 75 (PGPD-001), 100 (PGPD-002), 150 (PGPD-003)
- 75~150
- 76
- 80
- 80, 100, 125
- 82
- 85
- 89
- 90
- 95
- 100
- 102
- 103
- 105
- 107
- 110
- 115
- 120
- 122
- 125
- 128
- 130
- 135
- 138
- 140
- 145
- 150
- 152
- 153
- 160
- 165
- 167
- 170
- 175
- 180
- 190
- 195
- 200
- 220
- 225
- 230
- 240
- 250
- 267
- 275
- 288
- 300
- 320
- 390
- 400
- 450
- 500
- 600
-
Single Product/Set Classification
-
Shaft type
-
Magnet
-
Shaft through
-
Bolster
-
Grip Type
-
Tip size / flathead (-) blade thickness (mm) B2
- 0.15
- 0.16
- 0.18
- 0.2
- 0.23
- 0.25
- 0.25、0.31、0.36、0.60
- 0.3
- 0.31
- 0.32
- 0.35
- 0.36
- 0.4
- 0.45
- 0.5
- 0.55
- 0.6
- 0.7
- 0.75
- 0.8
- 0.9
- 0.95
- 1
- 1.1
- 1.2
- 1.5
- 1.6
- 1.8
- 2
- 2.5
- 3
- 6
-
(Box/Hex/Ball-Point) Width Across Flats (mm)
- -0.9,-1.25,-1.8,-2.3,-3.0,-3.5
- 0.7
- 0.71
- 0.89
- 0.9
- 1.27
- 1.3
- 1.5
- 1.59
- 1.95
- 2
- 2.2
- 2.5
- 2.6
- 2.65
- 2.7
- 3
- 3、4、5、6
- 3.1
- 3.18
- 3.35
- 3.5
- 4
- 4.5
- 5
- 5.5
- 6
- 6.3 × 8
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 17
-
(Box/Hex/Ball-Point) Width Across Flats (inch)
Narrow search by specifying Manufacturer
-
- PB SWISS TOOLS (127)
- VESSEL (90)
- ANEX (66)
- ENGINEER (54)
- WERA (46)
- TRUSCO NAKAYAMA (45)
- ESCO (40)
- TONE (39)
- KTC(KYOTO TOOL) (38)
- HOZAN (29)
- WIHA (27)
- SUNFLAG (17)
- HIRAI KOGU (16)
- KO-KEN TOOL (15)
- SK 11 (7)
- AS ONE (6)
- BONDHUS (5)
- EIGHT TOOL (4)
- HAZET (3)
- TRAD (3)
- WILLIAMS (3)
- E VALUE (2)
- FUJIYA (2)
- SMATO (2)
- SIGNET (2)
- SUEKAGE TOOL (2)
- TOP (2)
- ARC (1)
- HANDIWORK (1)
- HIOS (1)
- MITOLOY (1)
CAD
-
- 2D
- 3D
Related Categories to Screwdrivers
-
- Wrenches / Offset Wrenches / Ratchet Wrenches
- Hex Wrenches
- Monkey Wrenches
- Torx Wrenches
- Socket Wrenches
- Torque Wrenches
- Screwdrivers
- Torque Screwdrivers
- Pliers/Nippers/Pincers
- Hammers
- Tool Sets / Tool Boxes
- Cutter Knives
- Chisels
- Screwdriver Bits
- Socket Bits
- Crowbars
- Pullers
- Tweezers
- Engravers/Punches
- Vehicle Maintenance Tools
- Tools for Water Supply Faucets and Air-Conditioning Piping
- Cutting Tools
- Insulation Tools
- Sheet Metal Tools
- Explosion-Proof Hand Tools
- Caulking Tools
- Tools Used at Electric Facilities
- Crowbars
-
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy