(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Screwdrivers（Single Product/Set Classification：Set Product Page3）
| Days to Ship |
|
|---|
-
NO. TD-78 Plate Ratchet Screwdriver
VESSEL
[Features]
· A thin type ratchet with a head of just 18 mmStandard Price: MYR 91.41 Days to Ship: 9 Day(s) -
NO. TD-79 Plate Ratchet Screwdriver
VESSEL
[Features]
· A thin type ratchet with a head of just 18 mmStandard Price: MYR 90.50 Days to Ship: 9 Day(s) -
NO. TD-80 T-Type Ratchet Driver Set 【5 Pieces Per Package】
VESSEL
[Features]
· Screws can be tightened just by a repetitive motion of the wrist, without the need to change the handleStandard Price: MYR 68.38 Days to Ship: 9 Day(s) -
NO. TD-81 Power Ratchet Screwdriver【3 Pieces Per Package】
VESSEL
Can be used for fine gear feeding and tightened with minimal movement. Main tightening torque ratchet with plenty of margin. Two tool bits can be stowed in the handle.
Standard Price: MYR 102.90 Days to Ship: 9 Day(s) -
Screwdriver, Famidora 8 No.TD-800
VESSEL
A screwdriver set for home and office.
[Features]
· A set of Phillips and flathead screwdrivers, pin remover, and drill.
· Ergonomic handle that fits the palm of the hand.
· Color-coded colorful screwdriver (replacement shaft).
· A convenient stand for storage.
[Applications]
· For homes and offices.Standard Price: MYR 89.15 Days to Ship: 9 Day(s) -
Standard Price: MYR 39.85 Days to Ship: 9 Day(s) -
Torx Plate Ratchet Screwdriver No.TX-11
VESSEL
Ratchet plate driver with Torx bit.
[Features]
· Set of ratchet handle and Torx bit.
· Tamper-proof (tamper-proof Torx screws) compatible.
· The speed ring allows quick turning.
· Thin type ratchet handle convenient for use in narrow spaces.
· Remove the speed ring for use as a 6.35 mm square drive.
· Ball lock type hexagonal drive with width across flats of 6.35 mm.
[Applications]
· For automobile maintenance as well as various assembling and disassembling work.Standard Price: MYR 72.53 Days to Ship: 1 Day(s) -
Plate Ratchet Screw Catch (Torx) No.TX-12MC
VESSEL
Plate ratchet screwdriver.
[Features]
· Set of ratchet handle, Torx bit, and screw catch.
· Magnetic screw catch that securely holds screws.
· Can also be used with tamper-proof Torx screws.
· The speed ring allows quick turning, and can be removed for use as a 6.35 mm square drive.
· Hexagonal drive with width across flats of 6.35 mm.
[Applications]
· For automobile maintenance as well as various assembling and disassembling work.Standard Price: MYR 106.33 Days to Ship: 9 Day(s) -
NO. TD-73MC Plate Ratchet Screw Catch
VESSEL
Magnetic screw catch that securely holds screws. A set of hexagonal screw bits and Phillips bits used for furniture assembly and bicycles.
Standard Price: MYR 71.23 Days to Ship: 8 Day(s) -
Standard Price: MYR 51.04 Days to Ship: 4 Day(s) or more -
SK 11
Variable type handle enables selection of handle shape to match the specification application.
Standard Price: MYR 135.52 Days to Ship: 6 Day(s) or more -
SK 11
Automatic screwdriver that can easily attach/remove screws simply by pressing the handle.
[Features]
· Simply pressing the handle down makes it easy to tighten and loosen various screws, drill holes, etc.
· Commercially available 6.35 mm subtense hex bits can be mounted and used for various applications.
[Applications]
· For drilling wood and tightening items such as screws.Standard Price: MYR 79.78 Days to Ship: 6 Day(s) or more -
SK 11
Equipped with the slimmest head in its class, this ratchet screwdriver is ideal for working in narrower places.
[Features]
· The straight type allows smooth working in narrow spaces.
· Ultra-thin 13 mm head (when equipped with 12 mm bit).
[Applications]
· For tightening or loosening screws in narrow spaces.Standard Price: MYR 58.07- Days to Ship: 4 Day(s) or more -
Soft Finish® ESD Screwdriver Set (Set of 5)
WIHA
A 5-piece screwdriver set of Soft Finish® ESD anti-static stubby screwdrivers, including 3 Phillips screwdrivers and 2 flathead screwdrivers.
Standard Price: MYR 419.53 Days to Ship: 4 Day(s) or more -
Soft Finish® Screwdriver Set (Set of 6)
WIHA
[Features]
· 6-piece flathead and Phillips screwdriver set with Wiha SoftFinish handle.
· Round blade is made of high-grade chrome vanadium molybdenum steel.
· It has been quenched with a chrome plated finish.
· High-Precision Wiha ChromTop Process for Corrosion-Resistant TipStandard Price: MYR 524.26 Days to Ship: 9 Day(s) -
Set of Soft Finish® Torx® Screwdriver with Magic Spring
WIHA
Set of 6 Torx® Screwdrivers with Magic Springs
[Features]
· SoftFinish® Handle Specification Fits Perfectly in the Palm of the HandStandard Price: MYR 563.18 Days to Ship: 6 Day(s) or more -
Ceramic Adjustment Screwdriver Set DK-90
ENGINEER
Multifunction ceramic adjustment driver that enables 4 types of trimmer adjustment with the 1 tool.
[Features]
· Uses tough zirconia-based fine ceramic bit.
· For high frequency area adjustment with complete non-inductive properties. Also ideal as a short-circuit prevention screwdriver for board protection.
· There are 2 bits at both ends to enable 4 kinds of adjustment (tip: Phillips, flathead bits / shank: hex).
· Pencil-type portable design with caps for protecting tip.
· 4 piece set of DA-48 and 50 to 52.
[Applications]
· For audio equipment such as tuners and amplifiers.
· For TV, video camera, radio-related, wireless equipment, computer-related facilities, communications equipment, etc.Standard Price: MYR 461.49 Days to Ship: 8 Day(s) -
Twin Wrench Driver Set (Special Screw Compatible Type)
ENGINEER
Twin-wrench screwdriver set that's effective in narrow spaces and by walls.
[Features]
· Twin wrench screwdriver with a set of 8 types of bits for special screws and Phillips and flathead bits.
· This cushioned handle fits perfectly in the hand, and does not slip.
· Substitute bit holder is a burette type that is convenient for carrying.
· +/- bit with a magnetic tip.Standard Price: MYR 165.08 Days to Ship: 9 Day(s) -
ENGINEER
A mini soft screwdriver set with a soft grip which fits well in the hand.
[Features]
· It is a soft grip which fits well in the hand.
· The shaft is made of a special alloy steel used in the manufacturing industry, and has been hardened over the whole length.
· The tip has been black-point processed.
· It has a chrome plated finish.
[Applications]
· For tightening and removing various screws.Standard Price: MYR 113.28 Days to Ship: 8 Day(s) -
Replacement Screwdriver Set DK-50
ENGINEER
+/- 2-WAY bit for 2-in-1 interchangeable screwdriver set.
[Features]
· +/- 2-WAY 2-in-1 bit.
· 3-piece interchangeable screwdriver set.
[Applications]
· For tightening and removing various screws.Standard Price: MYR 69.30 Days to Ship: 9 Day(s) -
ENGINEER
Screwdriver bit series special screw bit set that supports various special screws.
[Features]
· 10-piece set of DR-81 to 93.
· With bit holder.
[Applications]
· For all types of maintenance of mobile phones, PHS, radio sets, PC, home game machines, etc.Standard Price: MYR 356.00 Days to Ship: 9 Day(s) -
Replacement Stubby Screwdriver Set CDS2
TONE
Screwdriver with a flathead and Phillips head at both ends.
[Features]
· The total length is short, making it ideal for working in narrow places.
· Total length: 90 mm.
· Grip type: Resin.
[Applications]
· Assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.Standard Price: MYR 38.70 Days to Ship: 9 Day(s) -
Replacement Screwdriver Set CD12
TONE
Screwdriver with a flathead and Phillips head at both ends.
[Features]
· The total length is short, making it ideal for working in narrow places.
· Total length: 195 mm.
· Grip type: Resin.
[Applications]
· Assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.Standard Price: MYR 55.86 Days to Ship: 9 Day(s) -
Long Shaft Screwdriver Set LD2
TONE
2-piece long shaft screwdriver set with an overall length of 395 mm.
[Features]
· For work which can't be reached using a conventional driver.
· Length: 395 mm, shaft length: 267 mm. Round shaft type with magnet.
· Flathead tip -0.8 x 6.0.
· Phillips tip +No.2.
[Applications]
· Assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.Standard Price: MYR 115.69 Days to Ship: 9 Day(s) -
TONE
A set of 2 types of handles, 3 sized replacement bit holders and 20 frequently used bits.
[Features]
· Left and right switching can be done by simply turning the change knob.
· The grip shape can be changed between 2 types according to the work.
· The bit holder has a one-touch bit release mechanism.
· Grip component of the screwdriver comes with a magazine that can store 6 bits.
[Applications]
· For maintenance of automobiles, motorcycles, bicycles, etc. and maintenance of industrial equipment, etc.
· Ideal for a wide range of maintenance work.Standard Price: MYR 559.52 Days to Ship: 9 Day(s) -
TONE
Full set containing screwdriver type handles and tip replacement bits.
[Features]
· Screwdriver-type handles with built-in ratchet mechanism are available in 3 types.
· There are 32 types of replaceable tip bits.
· A full set of screwdrivers that also accommodates 3 types of extension bit holders.
[Applications]
· A complete set ideal for tightening/loosening flathead / Phillips head screws and hexagon socket bolts.
· Ideal for a wide range of maintenance work, such as maintenance of automobiles, motorcycles, bicycles, etc. and maintenance of industrial equipment.Standard Price: MYR 661.51 Days to Ship: 9 Day(s) -
Replacement Screwdriver (Incorporating Magnet)
ANEX
Comes with a bolster which can be tightened or loosened with a wrench. An electric screwdriver bit (subtense 6.35 mm hex shaft) can be used. The Phillips part of the bit has double spikes (AAC) securely holding screws. The slotted part of the bit has a special shape that can be inserted into the removal hole of the terminal.
Standard Price: MYR 72.53 Days to Ship: 8 Day(s) -
Compact ratchet 52 (straight type) set
ANEX
[Features]
·It is ultra-thin with a head width of 20 mm.
·For screwdrivers in narrow spaces.
·Smooth work with 52 fine gears.
·A ratchet mechanism that allows you to turn the screw by repeatedly turning left and right without changing the handle.
·Uses ultra-short bits.Standard Price: MYR 333.19 Days to Ship: 9 Day(s) -
Standard Price: MYR 98.08 Days to Ship: 8 Day(s) -
HIRAI KOGU
A regular size ratchet type bit replacement type screwdriver with a joint attached to D-88. Includes a 6.35 mm hexagonal 30 mm bit, and can be used as a stubby type by removing the joint. 42-tooth gears provide smooth operation. Lights up in dark areas to prevent loss.
Standard Price: MYR 123.50 Days to Ship: 8 Day(s) -
Standard Price: MYR 44.07 Days to Ship: 9 Day(s) -
TRUSCO NAKAYAMA
A ratchet mechanism is included, which turns the screw just by a repetitive motion of the wrist, without the need to re-grip the handle.
Standard Price: MYR 99.15 Days to Ship: 9 Day(s) -
TRUSCO NAKAYAMA
This is a universal type switchable screwdriver that can use bits for electric screwdrivers. The cushion handle resists slipping, even when work gloves are worn.
Standard Price: MYR 45.38- Days to Ship: 9 Day(s) -
TRUSCO NAKAYAMA
The tip rotates when hit with a hammer. Comes into action when turning rusty or fixed screws.
Standard Price: MYR 286.54 Days to Ship: 9 Day(s) -
Mini Impact Screwdriver Set for Rusty Screws
TRUSCO NAKAYAMA
The tip rotates when hit with a hammer. Comes into action when turning rusty or fixed screws. Supports opposite side 6.35 mm hex shafts and single-headed bits.
Standard Price: MYR 89.01 Days to Ship: 5 Day(s) or more -
Pin Vise (Single-headed/Double-headed)
TRUSCO NAKAYAMA
A pin vise ideal for drilling small holes or deburring.
Standard Price: MYR 81.61- Days to Ship: 5 Day(s) or more -
WERA
The lasered tip provides exceptional bite into screws. Special grip design provides an easy grip and comfortable fit. White carton specifications.
Standard Price: MYR 698.35 Days to Ship: 8 Day(s) -
Micro Screwdriver Set - 12 pcs
WERA
Uses a handle based on ergonomic design which is easy to carry, rotate and transmits torque reliably.
Standard Price: MYR 774.43 Days to Ship: 5 Day(s) or more -
WERA
Uses a handle based on ergonomic design which is easy to carry, rotate and transmits torque reliably.
Standard Price: MYR 386.90 Days to Ship: 5 Day(s) or more -
Interchangeable ESD Micro Screwdriver (Anti-static Type)
WERA
The product conforms to European Standards EN100-015-1 as the optimal precision screwdriver for assembly of precision electric equipment. Uses a handle based on ergonomic design which is easy to carry, rotate and transmits torque reliably.
Standard Price: MYR 752.65- Days to Ship: 8 Day(s) or more -
WERA
Body center part opens when tail part is pushed, then bits inside can be replaced for use.
Standard Price: MYR 562.40 Days to Ship: 8 Day(s) -
WERA
Replacement drivers are collected in a compact, convenient, hand-held case.
Standard Price: MYR 888.42 Days to Ship: 5 Day(s) or more -
Screwdriver Set for Voltage Detection Replacement Set of 6 (for Low Voltage)
VESSEL
For voltage testing and maintenance of electrical products and distribution boards in general households or industry.
Standard Price: MYR 74.89 Days to Ship: 5 Day(s) or more -
TRUSCO NAKAYAMA
[Features]
· The ratchet mechanism enables fast turning in tight spaces.
· Ultra-short design that allows the turning of hexagon bolts in narrow locations.Standard Price: MYR 97.60 Days to Ship: 5 Day(s) or more -
T-Shaped Ratchet Screwdriver Set
TRUSCO NAKAYAMA
[Features]
· A ratchet mechanism is included, which turns the screw just by a repetitive motion of the wrist, without the need to re-grip the handle.Standard Price: MYR 172.95 Days to Ship: 5 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Tip standards |
| Tip size / Phillips (+) |
| Tip size / flathead (-) blade width (mm) B1 |
| Shaft length L (mm) |
| Single Product/Set Classification |
| Shaft type |
| Magnet |
| Shaft through |
| Bolster |
| Grip Type |
| Tip size / flathead (-) blade thickness (mm) B2 |
| (Box/Hex/Ball-Point) Width Across Flats (mm) |
| (Box/Hex/Ball-Point) Width Across Flats (inch) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | VESSEL | VESSEL | VESSEL | VESSEL | VESSEL | VESSEL | VESSEL | VESSEL | VESSEL | E VALUE | SK 11 | SK 11 | SK 11 | WIHA | WIHA | WIHA | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | TONE | TONE | TONE | TONE | TONE | ANEX | ANEX | ANEX | HIRAI KOGU | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | WERA | WERA | WERA | WERA | WERA | WERA | VESSEL | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA |
| Product Series | Screwdriver Set for Voltage Detection Replacement Set of 6 (for Low Voltage) | ||||||||||||||||||||||||||||||||||||||||||||
| Days to Ship | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 1 Day(s) | 9 Day(s) | 8 Day(s) | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 9 Day(s) | 6 Day(s) or more | 8 Day(s) | 9 Day(s) | 8 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 8 Day(s) | 9 Day(s) | 8 Day(s) | 8 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 5 Day(s) or more | 5 Day(s) or more | 8 Day(s) | 5 Day(s) or more | 5 Day(s) or more | 8 Day(s) or more | 8 Day(s) | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more |
| Tip standards | Phillips (+)/Flathead(-) | Combination | Phillips (+)/Flathead(-) | Phillips (+)/Flathead(-) | Phillips (+)/Flathead(-) | Phillips (+)/Flathead(-) | Combination | Combination | Combination | Combination | Phillips (+)/Flathead(-) | Combination | Phillips (+)/Flathead(-) | Phillips (+)/Flathead(-) | Phillips (+)/Flathead(-) | Torx | Phillips (+)/Flathead(-) | Combination | Phillips (+)/Flathead(-) | Phillips (+)/Flathead(-) | Combination | Phillips (+)/Flathead(-) | Phillips (+)/Flathead(-) | Phillips (+)/Flathead(-) | Combination | Combination | Phillips (+)/Flathead(-) | Combination | Phillips (+) | Phillips (+)/Flathead(-) | Phillips (+)/Flathead(-) | Phillips (+)/Flathead(-) | Phillips (+)/Flathead(-) | Phillips (+)/Flathead(-) | Phillips (+) | - | Combination | Combination | Phillips (+)/Flathead(-) | Combination | Combination | Combination | Combination | Box | Combination |
| Tip size / Phillips (+) | No.1 / No.2 / No.3 | No.1 / No.2 / No.3 | No.1 / No.2 / No.3 | No.1 / No.2 | No.0 / No.1 / No.2 | No.2 | No.2 | No.2 | No.1 / No.2 / No.3 | No.1 / No.2 | No.1 / No.2 / No.3 | No.1 / No.2 | No.1 / No.2 / No.3 | No.0 / No.1 / No.2 | No.1 / No.2 / No.3 | - | Other | No.1 / No.2 | No.00 / No.0 | No.00 / No.1 / No.2 | - | No.2 | No.1 / No.2 | No.2 | No.1 / No.2 / No.3 | No.1 / No.2 / No.3 | No.2 | No.1 / No.2 / No.3 | No.1 / No.2 | No.1 / No.2 | No.0 / No.1 / No.2 | No.0 / No.1 / No.2 | No.1 / No.2 / No.3 | No.2 / No.3 / No.4 | No.1 / No.2 | - | No.1 / No.2 / No.3 | No.00 / No.0 | No.00 / No.0 | No.00 / No.0 / No.1 | No.1 / No.2 | No.1 / No.2 / No.3 | No.1 / No.2 | - | No.1 / No.2 / No.3 |
| Tip size / flathead (-) blade width (mm) B1 | 4 ～ 6 | 4 ～ 6 | 4 ～ 6 | 4 ～ 6 | 2.5 ～ 6 | 6 | 6 | 6 | 4 ～ 6 | 6 | 4 ～ 6 | 4 ～ 6 | 6 | 3 ～ 4 | 4.5 ～ 6.5 | - | 0.8 ～ 2.5 | 4.5 ～ 6 | 3 ～ 4 | 2.6 ～ 6 | - | 6 | 4.5 ～ 6 | 6 | 5.5 ～ 8 | 5.5 ～ 8 | 6 | 6 | - | 6 | 1.8 ～ 6 | 1.8 ～ 6 | 6 | 8 ～ 10 | - | - | 6 ～ 8 | 1.5 ～ 3 | 1.2 ～ 3 | 1.5 ～ 3 | 5.5 ～ 6.5 | 5.5 ～ 8 | 4 ～ 6 | - | 4 ～ 7 |
| Shaft length L (mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | 60 ～ 100 | 80 ～ 150 | 80 ～ 130 | - | - | 80 | 67 ～ 89 | - | - | - | 267 | - | - | 135 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Single Product/Set Classification | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product | Set Product |
| Shaft type | - | - | - | - | Round | Round | - | - | - | - | Square | Square | - | Round | Round | Round | Round | - | Round | Round | Round | Square | Square | Round | Square | Square | Round | - | Round | Square | Round | Round | Square | - | - | - | Round | Round | Round | - | Round | Round | - | - | - |
| Magnet | NA | NA | NA | Available | Available | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | Available | NA | NA | Available | NA | NA | Available | Available | Available | Available | NA | NA | Available | NA | NA | NA | NA | NA | - | NA | NA | NA | NA | NA | NA | - | - | - |
| Shaft through | - | - | - | - | NA | - | - | - | - | - | - | - | - | NA | NA | NA | NA | - | NA | - | - | - | - | NA | - | - | - | - | - | - | NA | NA | - | - | - | - | NA | NA | NA | - | - | - | - | - | - |
| Bolster | - | - | - | - | NA | - | - | - | - | - | - | - | - | NA | NA | NA | NA | - | NA | - | - | - | - | NA | - | - | Included | - | - | - | NA | NA | - | - | - | - | NA | NA | NA | - | - | - | - | - | - |
| Grip Type | Stainless Steel | Stainless Steel | Resin | Resin | Resin | Resin | Stainless Steel | Stainless Steel | Resin | Resin | Resin | Resin | Stainless Steel | Rubber | Rubber | Rubber | Resin | Rubber | Rubber | Resin | - | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Rubber | Resin | Resin | Resin | Rubber | Stainless Steel | Rubber | - | Rubber | Rubber | Rubber | Rubber | Rubber | Rubber | Resin | - | - |
| Tip size / flathead (-) blade thickness (mm) B2 | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.5 ～ 0.8 | 0.8 ～ 1.2 | - | 0.35 ～ 0.7 | - | 0.4 ～ 0.5 | - | - | 0.8 | 0.6 ～ 0.8 | 0.8 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| (Box/Hex/Ball-Point) Width Across Flats (mm) | - | 2.5 ～ 6 | - | - | - | - | - | - | 2.5 ～ 6 | 3 ～ 5 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2.5 ～ 6 | - | - | - | - | - | - | - | - | 8 ～ 10 | 0.9 ～ 2 | - | 1.5 ～ 2 | 6 | 3 ～ 5 | - | 5.5 ～ 12 | - |
| (Box/Hex/Ball-Point) Width Across Flats (inch) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Tip standards
- Phillips (+)
- Flathead (-)
- Phillips (+)/Flathead(-)
- Torx
- Box
- Hexagon
- Ballpoint
- Combination
- Other
-
Tip size / Phillips (+)
- No.000
- No.00
- No.0
- No.1
- No.2
- No.3
- No.4
- Other
-
Tip size / flathead (-) blade width (mm) B1
-
Shaft length L (mm)
- 5
- 9
- 10
- 11
- 13
- 14
- 15
- 16
- 17
- 18
- 18～90
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 28
- 30
- 35
- 36
- 38
- 40
- 41
- 45
- 50
- 51
- 57
- 60
- 60, 75, 80
- 60, 80, 100
- 65
- 66
- 67
- 70
- 75
- 75 (PGMD-075), 100 (PGMD-100), 25 (PGSD-M2), 75 (PGPD-001), 100 (PGPD-002), 150 (PGPD-003), 25 (PGSD-P2)
- 75 (PGMD-075), 100 (PGMD-100), 150 (PGMD-150), 25 (PGSD-M2), 75 (PGPD-001), 100 (PGPD-002), 150 (PGPD-003), 25 (PGSD-P2)
- 75 (PGMD-075), 100 (PGMD-100), 150 (PGMD-150), 75 (PGPD-001), 100 (PGPD-002), 150 (PGPD-003)
- 75~150
- 76
- 80
- 80, 100, 125
- 82
- 85
- 89
- 90
- 95
- 100
- 102
- 103
- 105
- 107
- 110
- 115
- 120
- 122
- 125
- 128
- 130
- 135
- 138
- 140
- 145
- 150
- 152
- 153
- 160
- 165
- 167
- 170
- 175
- 180
- 190
- 195
- 200
- 220
- 225
- 230
- 240
- 250
- 267
- 275
- 288
- 300
- 320
- 390
- 400
- 450
- 500
- 600
-
Single Product/Set Classification
- Single Item
- Set Product
-
Shaft type
-
Magnet
- Available
- NA
-
Shaft through
- Available
- NA
-
Bolster
- Included
- NA
-
Grip Type
- Resin
- Wooden handle
- Rubber
- Stainless Steel
-
Tip size / flathead (-) blade thickness (mm) B2
-
(Box/Hex/Ball-Point) Width Across Flats (mm)
-
(Box/Hex/Ball-Point) Width Across Flats (inch)
Narrow search by specifying Manufacturer
-
- PB SWISS TOOLS (27)
- VESSEL (22)
- ANEX (18)
- ENGINEER (17)
- TRUSCO NAKAYAMA (17)
- KTC(KYOTO TOOL) (11)
- TONE (11)
- WERA (9)
- HOZAN (7)
- SUNFLAG (7)
- HIRAI KOGU (6)
- KO-KEN TOOL (5)
- WIHA (5)
- BONDHUS (3)
- SK 11 (3)
- TRAD (3)
- EIGHT TOOL (2)
- E VALUE (2)
- SUEKAGE TOOL (2)
- FUJIYA (1)
- HANDIWORK (1)
- ARC (0)
- MITOLOY (0)
- HIOS (0)
- SMATO (0)
- SIGNET (0)
- TOP (0)
- AS ONE (0)
- ESCO (0)
- HAZET (0)
- WILLIAMS (0)
CAD
-
- 2D
- 3D
Related Categories to Screwdrivers
-
- Wrenches / Offset Wrenches / Ratchet Wrenches
- Hex Wrenches
- Monkey Wrenches
- Torx Wrenches
- Socket Wrenches
- Torque Wrenches
- Screwdrivers
- Torque Screwdrivers
- Pliers/Nippers/Pincers
- Hammers
- Tool Sets / Tool Boxes
- Cutter Knives
- Chisels
- Screwdriver Bits
- Socket Bits
- Crowbars
- Pullers
- Tweezers
- Engravers/Punches
- Vehicle Maintenance Tools
- Tools for Water Supply Faucets and Air-Conditioning Piping
- Cutting Tools
- Insulation Tools
- Sheet Metal Tools
- Explosion-Proof Hand Tools
- Caulking Tools
- Tools Used at Electric Facilities
- Crowbars
-
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy