(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Screwdrivers（Single Product/Set Classification：Single Item Page7）
| Days to Ship |
|
|---|
-
No.350 Wooden Handle Penetrating Screwdriver
VESSEL
A popular through screwdriver with wooden handle used habitually as a favorite.
[Features]
· The wood used for the handle is square timber that has been dried in the shade for 1 year.
· Grip has the warm feeling of wood that can't be felt with resin handles. Ultra-long selling product that debuted in the 1930s.
· A grip color-coded by Phillips or flathead.
· Wooden handle through-type with a large nut.
· The blade tip has shot-blast finishing.
[Applications]
· Through hole type, for demanding work.Standard Price: MYR 56.11- Days to Ship: 9 Day(s) -
NO. 30 Through Type Screwdriver
VESSEL
[Features]
· Integrated structure with the shaft running through the handle, ultra-strong type.Standard Price: MYR 277.06- Days to Ship: 9 Day(s) -
VESSEL
Special edge shape with coin-type screwdriver combined with 10 mm opposite side wrench. Metal line grip that changes color based on the viewing angle. Fully quenched Chrome Vanadium Steel.
Standard Price: MYR 58.93 Days to Ship: 8 Day(s) -
VESSEL
A faucet driver with a large blade edge that rotates stably.
[Features]
· Large cutting edge that remains steady even when force is applied.
· Metal line grip that changes color based on the viewing angle.
· Chrome vanadium steel.
· Full body hardened.
· Blade width: 19 mm.
[Applications]
· For loosening and tightening of stop valves, flow-control plugs, check valves, etc.Standard Price: MYR 58.93 Days to Ship: 8 Day(s) -
Power Grip Screwdriver No.4500
VESSEL
An easy-to-grip through screwdriver with an ergonomically designed grip.
[Features]
· A plastic handle through-type which is strong against rough use.
· With a hexagon part that can be tightened strongly with a wrench, etc.
· The handle is made of cellulose acetate resin and has an ergonomic design.
[Applications]
· Through hole type, for demanding work.Standard Price: MYR 71.83- Days to Ship: 9 Day(s) -
NO.220 Ball Grip Screwdriver +3
VESSEL
Long and thin axis design, ideal for large terminal board screws +3. Cushion grip, with +3 display. Chrome-vanadium steel that is completely tempered. High precision black point processing of the blade edge.
Standard Price: MYR 55.19 Days to Ship: 9 Day(s) -
Ceramic Adjustment Screwdriver No.9000
VESSEL
Adjustment screwdriver.
[Features]
· The cutting edge is made of nonmagnetic ceramic.
· Uses a non-conductive and nonmagnetic zirconia ceramic tip.
· For coil and trimmer adjustment.
[Applications]
· For the adjustment of electronic components and audio/computer/communication equipment.Standard Price: MYR 64.92- Days to Ship: 9 Day(s) -
Megadora General Screwdriver, Extra Long Type No.900
VESSEL
Megadora grip long shaft screwdriver.
[Features]
· 400 mm shaft length.
· The junk clip (rotary material) can be stably tightened by controlling runout of the long shaft.
[Applications]
· For work in deep places.
· Convenient for headlight adjustment and hose band removal in vehicle maintenance.Standard Price: MYR 89.56- Days to Ship: 9 Day(s) -
Megadora Thin-handle Screwdriver No.910
VESSEL
Thin shaft screwdriver.
[Features]
· Fine shaft type with a diameter of 4 mm or less.
· The blade has a black point treatment without a thick plating layer.
[Applications]
· It is convenient especially when working on deep and narrow places.Standard Price: MYR 42.53- Days to Ship: 8 Day(s) or more -
VESSEL
Through nut features a cam rotation structure. Tough shaft made of highly durable chrome vanadium steel that has been fully quenched. The cutting edge has undergone high precision black point processing.
Standard Price: MYR 102.51- Days to Ship: 9 Day(s) -
NO. TD-71 Plate Ratchet Screwdriver
VESSEL
[Features]
· Thin type ratchet handle convenient for narrow spacesStandard Price: MYR 65.85 Days to Ship: 9 Day(s) -
Petadora L Type Offset Screwdriver No.TD-61
VESSEL
L type offset driver with cushion grip that supports tightening work.
[Features]
· Champagne gold plating keeps a precise cutting edge.
· L Type convenient for use in narrow places.
· Fully quenched Chrome Vanadium Steel.
[Applications]
· For automobile maintenance as well as various assembling and disassembling work.Standard Price: MYR 36.52- Days to Ship: 9 Day(s) -
Petadora L Type Offset Screwdriver NO. TD-63
VESSEL
Fully quenched Chrome Vanadium Steel. Champagne gold plating keeps a precise cutting edge.
Standard Price: MYR 36.52- Days to Ship: 9 Day(s) -
NO. TD-250Y 3-Point Phillips Screwdriver
VESSEL
A compact and convenient screwdriver applicable to 3 sizes. Hand-fitting Y-type handle. Provides powerful fastening. The shaft is made of chrome vanadium steel. The whole body has been quenched.
Standard Price: MYR 46.52 Days to Ship: 9 Day(s) -
NO. TD-220B 3-Point Hex Screwdriver
VESSEL
A compact and convenient screwdriver applicable to 3 sizes. Hand-fitting Y-type handle. Provides powerful fastening. The shaft is made of chrome vanadium steel. The whole body has been quenched.
Standard Price: MYR 46.52 Days to Ship: 9 Day(s) -
NO. TD-240G 3-Point Hex Screwdriver
VESSEL
A compact and convenient screwdriver applicable to 3 sizes. Hand-fitting Y-type handle. Provides powerful fastening. The shaft is made of chrome vanadium steel. The whole body has been quenched.
Standard Price: MYR 46.52 Days to Ship: 9 Day(s) -
NO. TD-53 Precision Hex Driver
VESSEL
Main body stainless steel (end cap part is made of resin). For assembly, repair, and disassembly of precision equipment, hobby items, etc.
Standard Price: MYR 35.12 Days to Ship: 9 Day(s) -
Megadora General Screwdriver No.S-900
VESSEL
Megadora with accessory hanger.
[Features]
· Vessel Megadora general screwdriver with hanger.
· Can be selected from normal, stubby, through, ball grip and Crystine (normal, long-shaft, thin-shaft, precision and stubby).Standard Price: MYR 52.09- Days to Ship: 9 Day(s) -
VESSEL
A large diameter cushion grip which effectively transmits force while pushing. Tapered shape which fits into a sack.
Standard Price: MYR 45.76- Days to Ship: 9 Day(s) -
NO. TD-54 Pin Remover for Watchbands
VESSEL
For adjusting the length of metal watch bands.
[Features]
· Main body stainless steel (end cap part is made of resin).
· For adjusting the length of metal watch bands.Standard Price: MYR 29.50 Days to Ship: 9 Day(s) -
Soft Finish® Torque Screwdriver
WIHA
A Soft Finish® handle Torx Screwdriver. The blade is made of chrome vanadium molybdenum steel. It has been quenched with a chrome plated finish. The tip has undergone Wiha ChromTop processing.
Standard Price: MYR 86.93- Days to Ship: 6 Day(s) or more -
WIHA
The blade is made of chrome vanadium steel. It has been quenched and treated with a black oxide finish. This is a Torx screwdriver with a square, cellulose acetate handle to provide good resistance to shock.
Standard Price: MYR 60.65 Days to Ship: 4 Day(s) or more -
LED Voltage Detection Driver No.650D
SK 11
LED luminous tube generation enables conduction checks and DC versus AC to be understood at a glance.
Standard Price: MYR 65.83 Days to Ship: 7 Day(s) or more -
LED Voltage Detection Driver No.650 A
SK 11
Polarity identification or operating voltage can be understood at a glance.
Standard Price: MYR 65.83 Days to Ship: 6 Day(s) or more -
Wooden Handle Penetrating Plus Driver
WIHA
[Features]
· Round blade Phillips screwdriver with a hex bolster to increase tightening torque.
· The blade goes through the wooden portion of the handle.
· Made of chrome vanadium steel.
· It has been quenched with a nickel plated finish.
· Wiha wooden handle screwdriver with a leather cap.Standard Price: MYR 72.55 Days to Ship: 9 Day(s) -
Precision Ball Point Driver (Inch Size)
WIHA
[Features]
· Inch PicoFinish ball point hex screwdriver.
· With rotary cup.
· Maximum Inclination Angle 25°Standard Price: MYR 80.76 Days to Ship: 9 Day(s) -
Precision Ball Point Hex Driver (Pico Finish)
WIHA
[Features]
· PicoFinish ball point screwdriver with soft rubber handle.
· With rotary cup.
· Can be operated with a tilt of up to 25°.
· The blade is made of high grade chrome vanadium molybdenum steel.
· It has been quenched with a chrome plated finish.
· ChromTop Processed TipStandard Price: MYR 78.55 Days to Ship: 4 Day(s) or more -
Precision Nut Driver (Inch Size)
WIHA
[Features]
· PicoFinish nut driver with soft rubber handle.
· With rotary cup.
· The blade is made of chrome vanadium molybdenum steel.
· Quenched with a Chrome Plated FinishStandard Price: MYR 110.08 Days to Ship: 9 Day(s) -
ESD Torx® Precision Screwdriver
WIHA
[Features]
· This is a precision ESD Torx® screwdriver.
· Handle has an anti-static function.
· Blade: Chrome vanadium steel, fully quenched, chrome plated finish.
· Handle: Precision handle with rotating cap.
· Surface resistivity 106 to 109 ohms.
· Manufacturing Standard: Manufactured in accordance with IEC 61340-5-1.
· Application: Used to assemble electronic parts sensitive to static electricity.Standard Price: MYR 113.07 Days to Ship: 4 Day(s) or more -
Soft Finish® ESD Flathead Screwdriver
WIHA
[Features]
· A Soft Finish® ESD anti-static flathead screwdriver.
· Blade: High grade chrome vanadium molybdenum steel, fully quenched, chrome plated finish.
· The tip has undergone Wiha ChromTop processing.
· Handle: WIHA SoftFinish Multi-Component Handle.
· Surface resistivity 106 to 109 ohms.
· Manufacturing Standard: IEC 61340-5-1Standard Price: MYR 156.98 Days to Ship: 6 Day(s) or more -
Phillips Screwdriver with Hexagon Bolster (Soft Finish®)
WIHA
[Features]
· Includes a hexagonal bolster for tightening with stronger torque.
· The blade is made of high grade chrome vanadium molybdenum steel.
· After quenching, it has been given a chrome plated finish.
· ChromTop Processed TipStandard Price: MYR 209.17 Days to Ship: 4 Day(s) or more -
WIHA
[Features]
· T-handle type nut driver.
· A long screw can also be used due to the depth of the shank interior.
· The blade is made of chrome vanadium steel.
· Quenched with Nickel Plated FinishStandard Price: MYR 171.95- Days to Ship: 4 Day(s) or more -
Nut Screwdriver (Soft Finish®)
WIHA
[Features]
· A Soft Finish handle nut screwdriver.
· A protruding nut screw can also be used due to the depth of the shank interior.
· The blade is made of chrome vanadium steel.
· Quenched with a Chrome Plated FinishStandard Price: MYR 110.65- Days to Ship: 9 Day(s) -
Torx Plus® Screwdriver (Soft Finish®)
WIHA
[Features]
· A Soft Finish handle Torx screwdriver.
· The blade is made of chrome vanadium molybdenum steel.
· It has been quenched with a chrome plated finish.
· ChromTop Processed TipStandard Price: MYR 72.90 Days to Ship: 4 Day(s) or more -
Soft Finish® Torx® Screwdriver with Magic Spring
WIHA
Soft Finish® Handle Torx® Screwdriver with MagicSpring
[Features]
· The blade is made of chrome vanadium steel.
· Fully hardened, with chrome plate finish.
· Since the tip is ChromTop processed, it has a high accuracy, and fits Torx screws exactly.
· Ergonomic multi-component handle specification makes it easy to turn screwsStandard Price: MYR 89.02 Days to Ship: 4 Day(s) or more -
Tamper Proof Torx® Driver (Soft Finish®)
WIHA
[Features]
· Screwdriver for tamper-proof Torx screws for theft and risk prevention (hole on the tip).
· The blade is made of high grade chrome vanadium molybdenum steel.
· It has been quenched with a chrome plated finish.
· ChromTop Processed TipStandard Price: MYR 95.60- Days to Ship: 4 Day(s) or more -
Phillips Screwdriver with Cap (SoftFinish ®)
WIHA
[Features]
· With a hex bolster for wrenches.
· Fixed screws can be hit with a hammer and loosened with the hexagonal blade passed through the handle and the strengthened steel cap construction.
· The blade is made of high grade chrome vanadium molybdenum steel.
· It has been quenched with a chrome plated finish.
· ChromTop Processed TipStandard Price: MYR 175.12 Days to Ship: 4 Day(s) or more -
Magnetizer (Screwdriver Magnet Magnetizer/Demagnetizer)
WIHA
[Features]
· Can be used for magnetization and demagnetization of steel tools such as screwdrivers and tweezers.
· Box is made of high quality green plastic that is resistant to impacts.
· Size: 52 (W) x 29 (D) x 50 (H) mm.
· Magnetize a tool by inserting it through the slot indicated with a plus (+) marking.
· Demagnetize a tool by gliding it through the slot indicated with a minus (-) marking.
· If not completely demagnetized, repeat one more time.Standard Price: MYR 221.00 Days to Ship: 9 Day(s) -
Standard Price: MYR 48.63 Days to Ship: 9 Day(s) -
ENGINEER
[Features]
· Ratchet mechanism and quick-turning mechanism improve work efficiency.
· Highly effective for work in tight spaces where a normal screwdriver doesn't fit.Standard Price: MYR 69.84 Days to Ship: 9 Day(s) -
ENGINEER
Wireless microphone jack and connectors can be attached and detached easily.
Standard Price: MYR 20.87- Days to Ship: 8 Day(s) -
Standard Price: MYR 20.87 Days to Ship: 8 Day(s) -
Ceramic Adjustment Screwdriver DA-48 – 52
ENGINEER
Multifunction ceramic adjustment driver that enables 4 types of trimmer adjustment with the 1 tool.
[Features]
· Uses tough zirconia-based fine ceramic bit.
· For high frequency area adjustment with complete non-inductive properties.
· Also ideal as a short-circuit prevention screwdriver for board protection.
· There are 2 bits at both ends to enable 4 kinds of adjustment. (Tip: +/- Bit, Shaft: Hex)
· Pencil-type portable design with caps for protecting tip.
[Applications]
· For audio equipment such as tuners and amplifiers, TVs, video cameras, and radio related equipment.
· For work related to wireless devices, computers and communications.Standard Price: MYR 121.07- Days to Ship: 8 Day(s) or more -
Ceramic Adjustment Screwdriver, Detachable DA-72 – 79
ENGINEER
Thin-shaft ceramic adjustment screwdriver that's ideal for trimmer adjustment of deep areas.
[Features]
· High-strength, long lasting, completely non-inductive high frequency adjustment driver made of new zirconia-based fine ceramics.
· It can be adjusted at 2 locations, the tip portion (+/- bit), and the shaft portion (hexagonal type).
· Since the shaft portion and the handle can be detached, it is also possible to use it mounted on machines, etc.
[Applications]
· This fine shaft type is ideal for adjustment of chassis parts and other deep areas.Standard Price: MYR 85.03- Days to Ship: 9 Day(s) -
Bit Pit (Portable Holder for Driver Bits)
ENGINEER
Portable screwdriver bit holder for electrical engineers.
[Features]
· A compact and stylish bit holder.
· Can be instantly attached/detached with a single touch.
· It can easily attach and remove bits by sliding the sleeve on the outside downwardly.
· It is even more useful when used in combination with any carabiner at hand.
[Applications]
· Ideal for electrical work.Standard Price: MYR 51.15 Days to Ship: 9 Day(s)
| Brand |
|---|
| Product Series |
| Days to Ship |
| Tip standards |
| Tip size / Phillips (+) |
| Tip size / flathead (-) blade width (mm) B1 |
| Shaft length L (mm) |
| Single Product/Set Classification |
| Shaft type |
| Magnet |
| Shaft through |
| Bolster |
| Grip Type |
| Tip size / flathead (-) blade thickness (mm) B2 |
| (Box/Hex/Ball-Point) Width Across Flats (mm) |
| (Box/Hex/Ball-Point) Width Across Flats (inch) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | VESSEL | VESSEL | VESSEL | VESSEL | VESSEL | VESSEL | VESSEL | VESSEL | VESSEL | VESSEL | VESSEL | VESSEL | VESSEL | VESSEL | VESSEL | VESSEL | VESSEL | VESSEL | VESSEL | VESSEL | WIHA | WIHA | SK 11 | SK 11 | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER |
| Product Series | |||||||||||||||||||||||||||||||||||||||||||||
| Days to Ship | 9 Day(s) | 9 Day(s) | 8 Day(s) | 8 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 8 Day(s) or more | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 6 Day(s) or more | 4 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more | 9 Day(s) | 9 Day(s) | 4 Day(s) or more | 9 Day(s) | 4 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 9 Day(s) | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 9 Day(s) | 9 Day(s) | 9 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) or more | 9 Day(s) | 9 Day(s) |
| Tip standards | Phillips (+) / Flathead (-) | Flathead (-) | Flathead (-) | Flathead (-) | Phillips (+) / Flathead (-) | Phillips (+) | Phillips (+) / Flathead (-) | Phillips (+) / Flathead (-) | Phillips (+) / Flathead (-) | Phillips (+) | Phillips (+) | Phillips (+) / Flathead (-) | Hexagon | Phillips (+) | Hexagon | Hexagon | Hexagon | Phillips (+) / Flathead (-) | Phillips (+) / Flathead (-) | Other | Torx | Torx | Other | Other | Phillips (+) | Ballpoint | Ballpoint | Box | Torx | Flathead (-) | Phillips (+) | Box | Box | Torx | Torx | Torx | Phillips (+) | - | - | Phillips (+)/Flathead(-) | Other | Phillips (+) / Flathead (-) | Flathead (-) / Phillips (+)/Flathead(-) | Phillips (+) / Flathead (-) | - |
| Tip size / Phillips (+) | No.1 / No.2 / No.3 / No.4 | - | - | - | No.1 / No.2 / No.3 / No.4 | No.3 | No.0 / Other | No.2 | No.0 / No.1 | No.2 / No.3 | No.2 | No.1 / No.2 | - | No.1 / No.2 / No.3 | - | - | - | No.1 / No.2 / No.3 | No.1 / No.2 / No.3 | - | - | - | - | - | No.2 | - | - | - | - | - | No.4 | - | - | - | - | - | No.2 | - | - | No.2 | - | No.2 | Other | Other | - |
| Tip size / flathead (-) blade width (mm) B1 | 5.5 ～ 10 | 9.5 ～ 11 | 18 | 18 | 5.5 ～ 9 | - | 1.3 ～ 3.4 | 6 | 3 ～ 4 | - | - | 6 | - | - | - | - | - | 6 ～ 8 | 6 ～ 8 | - | - | - | - | - | - | - | - | - | - | 5.5 | - | - | - | - | - | - | - | - | - | 6 | - | 6.3 | 0.8 ～ 2.5 | 0.8 ～ 2.5 | - |
| Shaft length L (mm) | 75 ～ 300 | 145 ～ 195 | 85 | 85 | 75 ～ 200 | 150 | 15 ～ 30 | 400 | 75 ～ 200 | 100 ～ 150 | - | - | - | - | - | - | 18 ～ 24 | 75 ～ 400 | 75 ～ 150 | 10 | 60 | 60 | - | - | 100 | 60 | 50 | 60 | 40 | 125 | 200 | 125 ～ 230 | 125 | 60 | 80 | 60 ～ 115 | 100 | - | - | - | 75 | 38 | - | 15 ～ 20 | - |
| Single Product/Set Classification | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item |
| Shaft type | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | - | Round | Round | Round | Round | Round | Square | Round | Round | Round | Round | Round | Round | Round | Round | Square | Square | Round | Round | Round | Square | Round | Round | Round | Round | Round | Square | - | - | - | Round | Round | Round | Round | - |
| Magnet | NA | NA | NA | NA | Available | Available | NA | Available | Available | Available | NA | Available | Available | Available | Available | Available | NA | Available | Available | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | - | - | Available | NA | NA | NA | NA | - |
| Shaft through | Available | Available | NA | NA | Available | NA | NA | NA | NA | Available | - | NA | NA | NA | NA | NA | NA | Available / NA | NA | NA | NA | NA | - | - | Available | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | Available | - | - | - | NA | NA | NA | NA | - |
| Bolster | NA | NA | NA | NA | Included | NA | NA | NA | NA | NA | - | NA | NA | NA | NA | NA | NA | Included / NA | NA | NA | NA | NA | - | - | Included | NA | NA | NA | NA | NA | Included | NA | NA | NA | NA | NA | Included | - | - | - | NA | NA | NA | NA | - |
| Grip Type | Wooden handle | Wooden handle | Resin | Resin | Resin | Resin / Rubber | Resin | Resin | Resin | Resin | Stainless Steel | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Rubber | Resin | Rubber | Resin | Resin | Resin | Wooden handle | Rubber | Rubber | Rubber | Rubber | Rubber | Rubber | Rubber | Rubber | Rubber | Rubber | Rubber | Rubber | - | Resin | Stainless Steel | Resin | Resin | Resin | Resin | - |
| Tip size / flathead (-) blade thickness (mm) B2 | 0.8 ～ 1.2 | 1.2 | 1.6 | 1.6 | 0.8 ～ 1.2 | - | 0.4 ～ 0.5 | 0.9 | 0.4 ～ 0.5 | - | - | 0.9 | - | - | - | - | - | 0.9 ～ 1.1 | 0.9 ～ 1.1 | - | - | - | - | - | - | - | - | - | - | 1 | - | - | - | - | - | - | - | - | - | - | - | 0.9 | 0.35 ～ 0.7 | 0.35 ～ 0.7 | - |
| (Box/Hex/Ball-Point) Width Across Flats (mm) | - | - | - | - | - | - | - | - | - | - | - | - | 2.5 ～ 4 | - | 2 ～ 3 | 4 ～ 6 | 0.89 ～ 2.5 | - | - | - | - | - | - | - | - | - | 2 | - | - | - | - | 9 ～ 13 | 4 ～ 14 | - | - | - | - | - | - | - | - | - | - | - | - |
| (Box/Hex/Ball-Point) Width Across Flats (inch) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 7/64 | - | 3/32 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Tip standards
- Phillips (+)
- Flathead (-)
- Phillips (+)/Flathead(-)
- Torx
- Box
- Hexagon
- Ballpoint
- Combination
- Other
-
Tip size / Phillips (+)
- No.000
- No.00
- No.0
- No.1
- No.2
- No.3
- No.4
- Other
-
Tip size / flathead (-) blade width (mm) B1
-
Shaft length L (mm)
- 5
- 9
- 10
- 11
- 13
- 14
- 15
- 16
- 17
- 18
- 18～90
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 28
- 30
- 35
- 36
- 38
- 40
- 41
- 45
- 50
- 51
- 57
- 60
- 60, 75, 80
- 60, 80, 100
- 65
- 66
- 67
- 70
- 75
- 75 (PGMD-075), 100 (PGMD-100), 25 (PGSD-M2), 75 (PGPD-001), 100 (PGPD-002), 150 (PGPD-003), 25 (PGSD-P2)
- 75 (PGMD-075), 100 (PGMD-100), 150 (PGMD-150), 25 (PGSD-M2), 75 (PGPD-001), 100 (PGPD-002), 150 (PGPD-003), 25 (PGSD-P2)
- 75 (PGMD-075), 100 (PGMD-100), 150 (PGMD-150), 75 (PGPD-001), 100 (PGPD-002), 150 (PGPD-003)
- 75~150
- 76
- 80
- 80, 100, 125
- 82
- 85
- 89
- 90
- 95
- 100
- 102
- 103
- 105
- 107
- 110
- 115
- 120
- 122
- 125
- 128
- 130
- 135
- 138
- 140
- 145
- 150
- 152
- 153
- 160
- 165
- 167
- 170
- 175
- 180
- 190
- 195
- 200
- 220
- 225
- 230
- 240
- 250
- 267
- 275
- 288
- 300
- 320
- 390
- 400
- 450
- 500
- 600
-
Single Product/Set Classification
- Single Item
- Set Product
-
Shaft type
-
Magnet
- Available
- NA
-
Shaft through
- Available
- NA
-
Bolster
- Included
- NA
-
Grip Type
- Resin
- Wooden handle
- Rubber
- Stainless Steel
-
Tip size / flathead (-) blade thickness (mm) B2
-
(Box/Hex/Ball-Point) Width Across Flats (mm)
-
(Box/Hex/Ball-Point) Width Across Flats (inch)
Narrow search by specifying Manufacturer
-
- PB SWISS TOOLS (88)
- VESSEL (68)
- ANEX (42)
- ENGINEER (39)
- WERA (38)
- TRUSCO NAKAYAMA (34)
- KTC(KYOTO TOOL) (33)
- TONE (27)
- HOZAN (24)
- WIHA (22)
- SUNFLAG (12)
- HIRAI KOGU (11)
- KO-KEN TOOL (10)
- SK 11 (4)
- EIGHT TOOL (3)
- HAZET (3)
- BONDHUS (2)
- SMATO (2)
- SIGNET (2)
- TOP (2)
- ARC (1)
- FUJIYA (1)
- MITOLOY (1)
- SUEKAGE TOOL (1)
- HANDIWORK (0)
- E VALUE (0)
- HIOS (0)
- TRAD (0)
- AS ONE (0)
- ESCO (0)
- WILLIAMS (0)
CAD
-
- 2D
- 3D
Related Categories to Screwdrivers
-
- Wrenches / Offset Wrenches / Ratchet Wrenches
- Hex Wrenches
- Monkey Wrenches
- Torx Wrenches
- Socket Wrenches
- Torque Wrenches
- Screwdrivers
- Torque Screwdrivers
- Pliers/Nippers/Pincers
- Hammers
- Tool Sets / Tool Boxes
- Cutter Knives
- Chisels
- Screwdriver Bits
- Socket Bits
- Crowbars
- Pullers
- Tweezers
- Engravers/Punches
- Vehicle Maintenance Tools
- Tools for Water Supply Faucets and Air-Conditioning Piping
- Cutting Tools
- Insulation Tools
- Sheet Metal Tools
- Explosion-Proof Hand Tools
- Caulking Tools
- Tools Used at Electric Facilities
- Crowbars
-
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy