(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Screwdrivers（Single Product/Set Classification：Single Item Page4）
| Days to Ship |
|
|---|
-
Pencil Type Inspection Screwdriver
ANEX
[Features]
· It allows the presence of voltage to be checked in general households and factories.
· It indicates conductivity with a buzzer and LED lamp.Standard Price: MYR 69.40 Days to Ship: 5 Day(s) or more -
Pencil Type LED Electric Test Auto Tester (with Cord)
ANEX
[Features]
●Adopted a long life LED, that can easily test the presence of car voltage.
●With large alligator clip.
●Does not affect electronic elements, so it is optimal for vehicle equipped with electronic circuit equipment.
[Specification]
●AC Voltage (V) :-
●DC Voltage (V):6 to 36
●SPQ (piece) :6
●Tip: Needle Type
●Energizing Check, DC Polarity DeterminationStandard Price: MYR 81.85 Days to Ship: 9 Day(s) -
Spark Testing Screwdriver (Pencil Type with LED)
ANEX
[Features]
·You can easily check whether the power supply (AC) in general households and factories is energized.
·Wiring continuity can be checked.
·An LED lamp will let you know.
·It has a bright LED lamp.
·A continuity test is also possible.Standard Price: MYR 43.86 Days to Ship: 9 Day(s) -
Auto Tester (Pencil Type With Buzzer And LED)
ANEX
[Features]
·A long-life LED is used, and the presence or absence of voltage in the vehicle and the polarity can be determined by sound and light.Standard Price: MYR 91.47 Days to Ship: 5 Day(s) or more -
Replacement Power Screwdriver (Incorporating Magnet)
ANEX
[Features]
· A replacement type screwdriver which can be used with a screwdriver bit (subtense 6.35 mm hex shaft).
· The rear end of the handle can be used for turning eye bolts and thumb screws.
· The slotted part of the bit has a special shape that can be inserted into the removal hole of the terminal.
[Applications]
· + No. 2, -6 screwdriver
· Piston Rotation
· Wiring remover to be inserted in the terminal removing holeStandard Price: MYR 41.03 Days to Ship: 9 Day(s) -
"Mag Driver 22" Screwdriver (Magnetic)
ANEX
[Features]
· With a total length of 22 mm, even narrower spaces can be supported.
· Easy removal and refitting of bit.Standard Price: MYR 20.21 Days to Ship: 8 Day(s) -
ANEX
[Features]
・ Amazing number of gears 60
・ It rotates smoothly and has excellent workability
・ Stubby type that is convenient for narrow spaces
・ Ratchet mechanism that allows you to turn the screw by repeatedly turning left and right without changing the handle
・ It uses a strong elastomer resin handle for applying force easily
[Applications]
・ For tightening screws in narrow spacesStandard Price: MYR 75.85 Days to Ship: 9 Day(s) -
Ultra-Stubby Mini Switchable Screwdriver
ANEX
Features
• Convenient for narrow space.
Specification
• Total Length（mm）:33
• SPQ（piece）:12
• Bit Replacement Type
• Blade Edge: u 6, y No.2 Replacement BitStandard Price: MYR 23.92 Days to Ship: 9 Day(s) -
Standard Price: MYR 50.42 Days to Ship: 9 Day(s) -
ANEX
[Features]
·Compatible with 8 mm hexagonal shaft and single-headed bits.
·Bits for manual impact drivers.Standard Price: MYR 15.21- Days to Ship: 8 Day(s) or more -
ANEX
[Features]
· It can be used to open small holes and as a tap holder in precision machining, building hobby items and many other applications.Standard Price: MYR 60.38- Days to Ship: 9 Day(s) -
Rubber Grip Screwdriver (Magnetic)
HIRAI KOGU
[Features]
· Strong cushion grip enables excellent tightening force.
· (+) No. 2 x 100, (-) 6.3 x 100 shaft with knurling for fast turning and easy filing.Standard Price: MYR 32.75- Days to Ship: 8 Day(s) or more -
Cushioned Electrical Screwdriver (with Magnet)
HIRAI KOGU
[Features]
· The shaft is made from the highest grade nickel-chrome-molybdenum-vanadium steel.
· Generates powerful tightening torque, and has a strong ball cushioned grip.
· (+)/(-) color coding that enables the grip end to also be checked.
· ((+): Yellow, (-): red) color coding one-point design that enables the grip end to also be checked (patent pending).Standard Price: MYR 31.78- Days to Ship: 8 Day(s) -
Strong Square Pass-Through Shank Screwdriver (Pass-Through, Magnetic)
HIRAI KOGU
Strongly tighten or loosen by hitting the butt and pushing in a screw.
Standard Price: MYR 29.46- Days to Ship: 8 Day(s) or more -
2-WAY Cushioned Stubby (with Magnet)
HIRAI KOGU
[Features]
· A cushioned handle which stops the hand from slipping.
· Insertion part is 6.35 mm.
· (+) side is compatible with No. 1/2/3 types, (-) side is 6 mm wide.Standard Price: MYR 30.10 Days to Ship: 9 Day(s) -
HIRAI KOGU
[Features]
· Wide-type tip allows rotation of large screws that can only be rotated using large flathead screwdrivers.
· Can be used to rotate plastic screws, etc. without damaging them.
· A square shaft type that can be clamped on with pliers or a monkey wrench.
· Can be used to rotate plastic screws such as battery screws, etc. without damaging them.
[Applications]
· Related to implements used in the gas / water supply.
· For attaching/removing plastic screws from batteries, etc.Standard Price: MYR 53.02 Days to Ship: 8 Day(s) -
Standard Price: MYR 51.57 Days to Ship: 8 Day(s) -
Standard Price: MYR 51.57 Days to Ship: 8 Day(s) -
SUNFLAG
[Features]
· Supports 4 sizes ((-) 6, (+) No.1, (+) No.2, (+) No.3) with a single screwdriver.
· The flathead side can also be used for removing terminals.
· The rear part of the grip has a convenient groove for use with eyebolts/butterfly screws.Standard Price: MYR 49.77 Days to Ship: 15 Day(s) -
"Technical Screwdriver" (Magnetic)
SUNFLAG
[Features]
· Shaft length can be adjusted in 3 steps, and can be used differently based on applications.
[Applications]
· For maintenance work and repairs.Standard Price: MYR 64.88 Days to Ship: 9 Day(s) -
"Hybrid Grip Screwdriver" (Magnetic)
SUNFLAG
[Features]
· The tough holder part can be firmly tightened using a wrench.
· Heavy duty holder can also be used with interchangeable types.
· Insertion part is 6.35 mm. Can also be used with commercially available 6.35 mm tool bits.Standard Price: MYR 74.13 Days to Ship: 8 Day(s) -
Standard Price: MYR 53.84 Days to Ship: 8 Day(s) -
Offset Ratchet Driver With Forward/Reverse Switch
SUNFLAG
[Features]
· Has a convenient ratchet function.
· Comes with a quick-turning dial useful for temporary tightening.
· With a forward/reverse switch.
· Torque is greatly improved with special steel.Standard Price: MYR 43.84 Days to Ship: 8 Day(s) -
SUNFLAG
[Features]
· Can be used for hex socket screws such as cap screws and set screws.
· Even when the tip part wears off, the use of a hex shaft allows cutting the tip for long-term use as a hex wrench.
· The thread hole can be caught easily and turned from an angle.Standard Price: MYR 23.67- Days to Ship: 5 Day(s) or more -
Standard Price: MYR 53.86 Days to Ship: 8 Day(s) -
Standard Price: MYR 55.24 Days to Ship: 8 Day(s) -
"Benri Catch" Flexible Magnetic Pickup Tool
SUNFLAG
[Features]
· Can be bent freely and used in hard-to-reach places to pick up parts that are not attracted to magnets.
[Applications]
· Collection of precision components. Maintenance of machinery facilities.
· Collects parts lost while working in factories.
· Temporary fixing of screws and nuts.Standard Price: MYR 79.64- Days to Ship: 9 Day(s) -
Standard Price: MYR 28.87 Days to Ship: 9 Day(s) -
SUEKAGE TOOL
Has a compact head that is the best in its class. The number of gear teeth is 52, and it turns with a satisfying feeling, improving work efficiency. The total height of the head with the included short bit attached is 16.5 mm.
Standard Price: MYR 168.11 Days to Ship: 8 Day(s) -
Piercing Screwdriver (Incorporating Magnet)
TRUSCO NAKAYAMA
[Features]
· Features a non-slip ergonomically designed grip.
· The hexagon nut attached to the base of the shaft can be used together with a wrench to enable strong turning.Standard Price: MYR 38.80- Days to Ship: 8 Day(s) or more -
"Radial Ball Grip Switchable Screwdriver" (4 Sizes, Magnetic)
TRUSCO NAKAYAMA
[Features]
· Supports 4 sizes ((-) 6, (+) No.1, (+) No.2, (+) No.3) with a single unit.
· The radially processed grip does not become slippery even with greasy hands.
· It generates a powerful tightening torque, and has a strong ball cushioned grip.Standard Price: MYR 38.63 Days to Ship: 9 Day(s) -
TRUSCO NAKAYAMA
[Features]
· Can be used for a wide range of applications, such as in-factory work, maintenance of machinery and vehicles, etc.
· Commercially-available bits can be used with the hex holes on the rear of the handle, and deep screw tightening can be achieved by installing long bits.Standard Price: MYR 35.49 Days to Ship: 5 Day(s) or more -
Offset Ratchet Driver TRD-415·TRD-417
TRUSCO NAKAYAMA
[Features]
· The ratchet mechanism enables fast turning in tight spaces.
[Applications]
· For screw removal work in narrow places.Standard Price: MYR 37.39 Days to Ship: 5 Day(s) or more -
TRUSCO NAKAYAMA
[Features]
· Tightening is possible even at a 25°tilt thanks to the ballpoint shape.Standard Price: MYR 25.96- Days to Ship: 6 Day(s) or more -
TRUSCO NAKAYAMA
[Features]
· Tightening is possible even at a 25°tilt thanks to the ballpoint shape.
· It can be set as a stand and can be hung from a wall using a hook hole.Standard Price: MYR 68.51 Days to Ship: 9 Day(s) -
WERA
[Features]
· The lasered tip provides exceptional bite into screws.
· Special grip design provides an easy grip and comfortable fit.Standard Price: MYR 64.91- Days to Ship: 2 Day(s) or more -
WERA
[Features]
· The lasered tip provides exceptional bite into screws.
· Special grip design provides an easy grip and comfortable fit.
· Equipped with a bolster that can be firmly tightened with a wrench, etc.Standard Price: MYR 59.06- Days to Ship: 1 Day(s) or more -
Craft Form Plus Chisel Screwdriver
WERA
[Features]
· A strike type through screwdriver.
· Equipped with a bolster that can be firmly tightened with a wrench, etc.
· Special grip design provides an easy grip and comfortable fit.Standard Price: MYR 78.76- Days to Ship: 8 Day(s) -
WERA
[Features]
· Uses a handle based on ergonomic design which is easy to carry, rotate and transmits torque reliably.Standard Price: MYR 43.95- Days to Ship: 8 Day(s) -
WERA
[Features]
· Uses a handle based on ergonomic design which is easy to carry, rotate and transmits torque reliably.
· This product conforms to European Standard EN100-015-1.Standard Price: MYR 51.13- Days to Ship: 8 Day(s) or more -
WERA
Micro Screwdriver
[Features]
Uses a handle based on ergonomic design which is easy to carry, rotate and transmits torque reliably.
[Specifications]
Standards for Tip Shape: Torques
Set Classification: Single Item
Shaft Type: Circle
Grip Type: RubberStandard Price: MYR 71.45- Days to Ship: 8 Day(s) or more -
WERA
[Features]
· Uses a handle based on ergonomic design which is easy to carry, rotate and transmits torque reliably.
· This product conforms to European Standard EN100-015-1.Standard Price: MYR 86.51- Days to Ship: 8 Day(s) or more -
WERA
[Features]
· Supports tamper-proof TORX® screws.
· Uses a handle based on ergonomic design which is easy to carry, rotate and transmits torque reliably.Standard Price: MYR 77.06- Days to Ship: 8 Day(s) -
WERA
Hexagonal screwdriver for precision work.
[Features]
·The unique surface contact structure (Hex-Plus) contributes to longer screw life without damaging the inside of the hexagon screw hole.
·The ergonomic handle is based on ergonomics and is easy to hold, easy to rotate, and reliably transmits torque.
・ It allows you to tighten screws straight.
・ With a zone that can rotate quickly.
·Comes with a precision adjustment aim (hexagonal).
・ Designed to transmit stronger torque with your fingers.
·Reduces screw deformation by increasing the contact surface between the hexagonal cutting edge and the screw.Standard Price: MYR 44.03- Days to Ship: 8 Day(s) or more -
WERA
Rapidaptor
[Features]
Adapter handle.
Bits can be changed with one hand.
[Specifications]
Set Classification: Single Item
Grip Type: Rubber
Shank Diameter: 6.35mm
Mass: 121gStandard Price: MYR 178.40- Days to Ship: 8 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Tip standards |
| Tip size / Phillips (+) |
| Tip size / flathead (-) blade width (mm) B1 |
| Shaft length L (mm) |
| Single Product/Set Classification |
| Shaft type |
| Magnet |
| Shaft through |
| Bolster |
| Grip Type |
| Tip size / flathead (-) blade thickness (mm) B2 |
| (Box/Hex/Ball-Point) Width Across Flats (mm) |
| (Box/Hex/Ball-Point) Width Across Flats (inch) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | HIRAI KOGU | HIRAI KOGU | HIRAI KOGU | HIRAI KOGU | HIRAI KOGU | HIRAI KOGU | HIRAI KOGU | SUNFLAG | SUNFLAG | SUNFLAG | SUNFLAG | SUNFLAG | SUNFLAG | SUNFLAG | SUNFLAG | SUNFLAG | HIRAI KOGU | SUEKAGE TOOL | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | WERA | WERA | WERA | WERA | WERA | WERA | WERA | WERA | WERA | WERA |
| Product Series | Strong Square Pass-Through Shank Screwdriver (Pass-Through, Magnetic) | "Radial Ball Grip Switchable Screwdriver" (4 Sizes, Magnetic) | |||||||||||||||||||||||||||||||||||||||||||
| Days to Ship | 5 Day(s) or more | 9 Day(s) | 9 Day(s) | 5 Day(s) or more | 9 Day(s) | 8 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 8 Day(s) or more | 9 Day(s) | 8 Day(s) or more | 8 Day(s) | 8 Day(s) or more | 9 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 15 Day(s) | 9 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 5 Day(s) or more | 8 Day(s) | 8 Day(s) | 9 Day(s) | 9 Day(s) | 8 Day(s) | 8 Day(s) or more | 9 Day(s) | 5 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 9 Day(s) | 2 Day(s) or more | 1 Day(s) or more | 8 Day(s) | 8 Day(s) | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) | 8 Day(s) or more | 8 Day(s) or more |
| Tip standards | Flathead (-) | Other | Flathead (-) | - | Phillips (+)/Flathead(-) | Phillips (+) | Phillips (+)/Flathead(-) | Phillips (+)/Flathead(-) | Phillips (+)/Flathead(-) | Phillips (+) / Flathead (-) | - | Phillips (+) / Flathead (-) | Phillips (+) / Flathead (-) | Phillips (+) / Flathead (-) | Phillips (+)/Flathead(-) | Flathead (-) | Other | Other | Phillips (+)/Flathead(-) | Phillips (+) | Phillips (+) / Flathead (-) | Other | Phillips (+)/Flathead(-) | Ballpoint | Other | Other | - | Phillips (+) / Flathead (-) | Phillips (+) | Phillips (+) / Flathead (-) | Phillips (+)/Flathead(-) | Phillips (+) / Flathead (-) | Phillips (+)/Flathead(-) | Ballpoint | - | Phillips (+) / Flathead (-) | Phillips (+) / Flathead (-) | Phillips (+) / Flathead (-) | Phillips (+) / Flathead (-) | Phillips (+) / Flathead (-) | Torx | Torx | Torx | Hexagon | - |
| Tip size / Phillips (+) | - | - | - | - | No.2 | No.2 | No.2 | No.2 | No.2 | No.1 / No.2 / No.3 | - | No.2 | No.2 | No.2 / No.3 | No.1 / No.2 | - | - | - | - | No.1 / No.2 | No.2 | - | - | - | - | - | - | No.2 | No.2 | No.1 / No.2 / No.3 | No.1 / No.2 / No.3 | No.2 | No.2 | - | - | No.0 / No.1 / No.2 / No.3 / No.4 | No.0 / No.1 / No.2 / No.3 | No.1 / No.2 / No.3 / No.4 | No.00 / No.0 / No.1 | No.00 / No.0 / No.1 | - | - | - | - | - |
| Tip size / flathead (-) blade width (mm) B1 | - | - | - | - | 6 | - | 6 | 6 | 6 | 10 | - | 6 ～ 6.3 | 6.3 | 6 ～ 8 | 6 | 18 | - | - | 6 | - | 6 | - | 6 | - | - | - | - | 4.3 | - | 5.5 ～ 8 | 6 | 6 | 6 | - | - | 5 ～ 12 | 3.5 ～ 10 | 3.5 ～ 14 | 0.8 ～ 4 | 1.2 ～ 4 | - | - | - | - | - |
| Shaft length L (mm) | - | - | - | - | 135 | 9 | - | - | - | - | - | 100 ～ 250 | 100 ～ 200 | 100 ～ 150 | - | 75 | 130 | 125 | 100 | 50 ～ 110 | 95 | 75 | - | 51 ～ 122 | 100 | 100 | - | 200 | - | 75 ～ 150 | 100 | - | - | 60 ～ 190 | - | 60 ～ 300 | 60 ～ 175 | 80 ～ 250 | 40 ～ 100 | 40 ～ 80 | 40 ～ 60 | 40 | 60 | 40 ～ 60 | - |
| Single Product/Set Classification | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item |
| Shaft type | Round | - | Round | - | Square | - | Round | Round | Round | Square | - | Round | Round | Square | Square | Square | Round | Round | Square | Round | Round | Square | - | Square | Round | Round | - | Round | - | Round | Round | - | - | Square | - | Round | Square | Round | Round | Round | Round | Round | Round | Round | - |
| Magnet | NA | NA | NA | - | Available | Available | NA | NA | NA | NA | - | Available | Available | Available | Available | NA | NA | NA | NA | Available | Available | NA | NA | NA | NA | NA | - | Available | NA | Available | Available | NA | NA | NA | - | NA | NA | NA | NA | NA | NA | NA | NA | NA | - |
| Shaft through | NA | NA | NA | - | - | - | - | - | - | - | - | NA | NA | Available | - | NA | NA | NA | - | - | - | NA | - | NA | NA | NA | - | NA | - | Available | - | - | - | NA | - | NA | NA | Available | NA | NA | NA | NA | NA | NA | - |
| Bolster | NA | NA | NA | - | - | - | - | - | - | - | - | NA | NA | NA | - | NA | NA | NA | - | NA | Included | NA | - | NA | NA | NA | - | NA | - | Included | NA | - | - | NA | - | NA | Included / NA | Included / NA | NA | NA | NA | NA | NA | NA | - |
| Grip Type | Resin | Resin | Resin | - | Rubber | Resin | Resin | Resin | Resin | - | Stainless Steel | Rubber | Rubber | Resin | Resin | Resin | Resin | Resin | Rubber | Resin | Rubber | Resin | Stainless Steel | Resin | Resin | Resin | - | - | - | Rubber | Rubber | Resin | Stainless Steel | Resin | - | Rubber | Rubber | Rubber | Rubber | Rubber | Rubber | Rubber | Rubber | Rubber | Rubber |
| Tip size / flathead (-) blade thickness (mm) B2 | - | - | - | - | - | - | - | - | - | 1.6 | - | 0.8 ～ 0.9 | 0.8 | 0.9 ～ 1.1 | 0.8 | 1.6 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| (Box/Hex/Ball-Point) Width Across Flats (mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1.5 ～ 8 | - | - | - | - | - | - | - | - | - | 1.5 ～ 10 | - | - | - | - | - | - | - | - | - | 0.7 ～ 3 | - |
| (Box/Hex/Ball-Point) Width Across Flats (inch) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Tip standards
- Phillips (+)
- Flathead (-)
- Phillips (+)/Flathead(-)
- Torx
- Box
- Hexagon
- Ballpoint
- Combination
- Other
-
Tip size / Phillips (+)
- No.000
- No.00
- No.0
- No.1
- No.2
- No.3
- No.4
- Other
-
Tip size / flathead (-) blade width (mm) B1
-
Shaft length L (mm)
- 5
- 9
- 10
- 11
- 13
- 14
- 15
- 16
- 17
- 18
- 18～90
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 28
- 30
- 35
- 36
- 38
- 40
- 41
- 45
- 50
- 51
- 57
- 60
- 60, 75, 80
- 60, 80, 100
- 65
- 66
- 67
- 70
- 75
- 75 (PGMD-075), 100 (PGMD-100), 25 (PGSD-M2), 75 (PGPD-001), 100 (PGPD-002), 150 (PGPD-003), 25 (PGSD-P2)
- 75 (PGMD-075), 100 (PGMD-100), 150 (PGMD-150), 25 (PGSD-M2), 75 (PGPD-001), 100 (PGPD-002), 150 (PGPD-003), 25 (PGSD-P2)
- 75 (PGMD-075), 100 (PGMD-100), 150 (PGMD-150), 75 (PGPD-001), 100 (PGPD-002), 150 (PGPD-003)
- 75~150
- 76
- 80
- 80, 100, 125
- 82
- 85
- 89
- 90
- 95
- 100
- 102
- 103
- 105
- 107
- 110
- 115
- 120
- 122
- 125
- 128
- 130
- 135
- 138
- 140
- 145
- 150
- 152
- 153
- 160
- 165
- 167
- 170
- 175
- 180
- 190
- 195
- 200
- 220
- 225
- 230
- 240
- 250
- 267
- 275
- 288
- 300
- 320
- 390
- 400
- 450
- 500
- 600
-
Single Product/Set Classification
- Single Item
- Set Product
-
Shaft type
-
Magnet
- Available
- NA
-
Shaft through
- Available
- NA
-
Bolster
- Included
- NA
-
Grip Type
- Resin
- Wooden handle
- Rubber
- Stainless Steel
-
Tip size / flathead (-) blade thickness (mm) B2
-
(Box/Hex/Ball-Point) Width Across Flats (mm)
-
(Box/Hex/Ball-Point) Width Across Flats (inch)
Narrow search by specifying Manufacturer
-
- PB SWISS TOOLS (88)
- VESSEL (68)
- ANEX (42)
- ENGINEER (39)
- WERA (38)
- TRUSCO NAKAYAMA (34)
- KTC(KYOTO TOOL) (33)
- TONE (27)
- HOZAN (24)
- WIHA (22)
- SUNFLAG (12)
- HIRAI KOGU (11)
- KO-KEN TOOL (10)
- SK 11 (4)
- EIGHT TOOL (3)
- HAZET (3)
- BONDHUS (2)
- SMATO (2)
- SIGNET (2)
- TOP (2)
- ARC (1)
- FUJIYA (1)
- MITOLOY (1)
- SUEKAGE TOOL (1)
- HANDIWORK (0)
- E VALUE (0)
- HIOS (0)
- TRAD (0)
- AS ONE (0)
- ESCO (0)
- WILLIAMS (0)
CAD
-
- 2D
- 3D
Related Categories to Screwdrivers
-
- Wrenches / Offset Wrenches / Ratchet Wrenches
- Hex Wrenches
- Monkey Wrenches
- Torx Wrenches
- Socket Wrenches
- Torque Wrenches
- Screwdrivers
- Torque Screwdrivers
- Pliers/Nippers/Pincers
- Hammers
- Tool Sets / Tool Boxes
- Cutter Knives
- Chisels
- Screwdriver Bits
- Socket Bits
- Crowbars
- Pullers
- Tweezers
- Engravers/Punches
- Vehicle Maintenance Tools
- Tools for Water Supply Faucets and Air-Conditioning Piping
- Cutting Tools
- Insulation Tools
- Sheet Metal Tools
- Explosion-Proof Hand Tools
- Caulking Tools
- Tools Used at Electric Facilities
- Crowbars
-
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy