(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Screwdrivers（Page4）
| Days to Ship |
|
|---|
-
Pencil Type Inspection Screwdriver
ANEX
[Features]
· It allows the presence of voltage to be checked in general households and factories.
· It indicates conductivity with a buzzer and LED lamp.Standard Price: MYR 69.40 Days to Ship: 5 Day(s) or more -
Pencil Type LED Electric Test Auto Tester (with Cord)
ANEX
[Features]
●Adopted a long life LED, that can easily test the presence of car voltage.
●With large alligator clip.
●Does not affect electronic elements, so it is optimal for vehicle equipped with electronic circuit equipment.
[Specification]
●AC Voltage (V) :-
●DC Voltage (V):6 to 36
●SPQ (piece) :6
●Tip: Needle Type
●Energizing Check, DC Polarity DeterminationStandard Price: MYR 81.85 Days to Ship: 9 Day(s) -
Spark Testing Screwdriver (Pencil Type with LED)
ANEX
[Features]
·You can easily check whether the power supply (AC) in general households and factories is energized.
·Wiring continuity can be checked.
·An LED lamp will let you know.
·It has a bright LED lamp.
·A continuity test is also possible.Standard Price: MYR 43.86 Days to Ship: 9 Day(s) -
Replacement Power Screwdriver (Incorporating Magnet)
ANEX
[Features]
· A replacement type screwdriver which can be used with a screwdriver bit (subtense 6.35 mm hex shaft).
· The rear end of the handle can be used for turning eye bolts and thumb screws.
· The slotted part of the bit has a special shape that can be inserted into the removal hole of the terminal.
[Applications]
· + No. 2, -6 screwdriver
· Piston Rotation
· Wiring remover to be inserted in the terminal removing holeStandard Price: MYR 41.03 Days to Ship: 9 Day(s) -
"Mag Driver 22" Screwdriver (Magnetic)【1-5 Pieces Per Package】
ANEX
[Features]
· With a total length of 22 mm, even narrower spaces can be supported.
· Easy removal and refitting of bit.Standard Price: MYR 20.21- Days to Ship: 8 Day(s) -
ANEX
[Features]
・ Amazing number of gears 60
・ It rotates smoothly and has excellent workability
・ Stubby type that is convenient for narrow spaces
・ Ratchet mechanism that allows you to turn the screw by repeatedly turning left and right without changing the handle
・ It uses a strong elastomer resin handle for applying force easily
[Applications]
・ For tightening screws in narrow spacesStandard Price: MYR 75.85 Days to Ship: 9 Day(s) -
Ultra-Stubby Mini Switchable Screwdriver
ANEX
Features
• Convenient for narrow space.
Specification
• Total Length（mm）:33
• SPQ（piece）:12
• Bit Replacement Type
• Blade Edge: u 6, y No.2 Replacement BitStandard Price: MYR 23.92 Days to Ship: 9 Day(s) -
ANEX
[Features]
· Wide (large) handle that makes it easy to apply force. (Handle diameter 40 mm)
· Ultra-short stubby screwdriver, which can get into even narrow spaces.
· An ultra-short tool bit is used.
[Applications]
· Work in narrow spaces.Standard Price: MYR 38.83 Days to Ship: 5 Day(s) or more -
ANEX
[Features]
·Suitable for removing screws that require force.
·A single screwdriver can be used in two different ways: straight and T-shaped.
·You can easily switch from a T shape to a straight shape (or vice versa) with a single touch.
·T shape: For initial loosening and retightening that requires force.
·Straight type: For normal screwdrivers (fast turning).
·Bit replacement formula.
·With magnet (bit).
・ With storage case.Standard Price: MYR 268.20 Days to Ship: 9 Day(s) -
Standard Price: MYR 50.42 Days to Ship: 9 Day(s) -
Ratchet driver with flexible shaft
ANEX
[Features]
· Ideal for fastening screws on corners and edges.Standard Price: MYR 113.63 Days to Ship: 9 Day(s) -
Rubber Grip Screwdriver (Magnetic)
HIRAI KOGU
[Features]
· Strong cushion grip enables excellent tightening force.
· (+) No. 2 x 100, (-) 6.3 x 100 shaft with knurling for fast turning and easy filing.Standard Price: MYR 32.75- Days to Ship: 8 Day(s) or more -
Cushioned Electrical Screwdriver (with Magnet)
HIRAI KOGU
[Features]
· The shaft is made from the highest grade nickel-chrome-molybdenum-vanadium steel.
· Generates powerful tightening torque, and has a strong ball cushioned grip.
· (+)/(-) color coding that enables the grip end to also be checked.
· ((+): Yellow, (-): red) color coding one-point design that enables the grip end to also be checked (patent pending).Standard Price: MYR 31.78- Days to Ship: 8 Day(s) -
Strong Square Pass-Through Shank Screwdriver (Pass-Through, Magnetic)
HIRAI KOGU
Strongly tighten or loosen by hitting the butt and pushing in a screw.
Standard Price: MYR 29.46- Days to Ship: 8 Day(s) or more -
Precision Screwdriver Set (Set of 3)
HIRAI KOGU
[Features]
· A 2-way set with a variably adjustable shaft length (18-100 mm).
[Applications]
· Precision screwdriver.
· A screwdriver for watches, glasses, etc.Standard Price: MYR 51.42 Days to Ship: 8 Day(s) -
2-WAY Cushioned Stubby (with Magnet)
HIRAI KOGU
[Features]
· A cushioned handle which stops the hand from slipping.
· Insertion part is 6.35 mm.
· (+) side is compatible with No. 1/2/3 types, (-) side is 6 mm wide.Standard Price: MYR 30.10 Days to Ship: 9 Day(s) -
Adjustable Cushioned Ratchet (with Magnet)
HIRAI KOGU
[Features]
· As the shaft length is continuously retractable from a minimum of 80 mm to its longest length of 150 mm, it is perfect for attaching and removing screws in awkward spaces, etc.
· Various bits can be stored by mounting them to dedicated holders, making them unlikely to be lost.
· Turns almost any screw, such as hex socket bolts, hexalobular screws, Phillips screws, etc.
· Includes a ratchet mechanism.Standard Price: MYR 162.79 Days to Ship: 8 Day(s) -
HIRAI KOGU
[Features]
· Wide-type tip allows rotation of large screws that can only be rotated using large flathead screwdrivers.
· Can be used to rotate plastic screws, etc. without damaging them.
· A square shaft type that can be clamped on with pliers or a monkey wrench.
· Can be used to rotate plastic screws such as battery screws, etc. without damaging them.
[Applications]
· Related to implements used in the gas / water supply.
· For attaching/removing plastic screws from batteries, etc.Standard Price: MYR 53.02 Days to Ship: 8 Day(s) -
Mighty Grip Square Shaft Screwdriver Set (Magnetic) 【2 Pieces Per Package】
HIRAI KOGU
[Features]
· Generates powerful tightening torque with the radial grip.
· Because of the square shaft, a strong tightening force can be applied with a monkey wrench, etc.
[Applications]
· For attaching/removing screws.Standard Price: MYR 73.87 Days to Ship: 8 Day(s) -
Standard Price: MYR 51.57 Days to Ship: 8 Day(s) -
Standard Price: MYR 51.57 Days to Ship: 8 Day(s) -
Standard Price: MYR 24.14 Days to Ship: 8 Day(s) -
SUNFLAG
[Features]
· Supports 4 sizes ((-) 6, (+) No.1, (+) No.2, (+) No.3) with a single screwdriver.
· The flathead side can also be used for removing terminals.
· The rear part of the grip has a convenient groove for use with eyebolts/butterfly screws.Standard Price: MYR 49.77 Days to Ship: 15 Day(s) -
"Technical Screwdriver" (Magnetic)
SUNFLAG
[Features]
· Shaft length can be adjusted in 3 steps, and can be used differently based on applications.
[Applications]
· For maintenance work and repairs.Standard Price: MYR 64.88 Days to Ship: 9 Day(s) -
"Hybrid Grip Screwdriver" (Magnetic)
SUNFLAG
[Features]
· The tough holder part can be firmly tightened using a wrench.
· Heavy duty holder can also be used with interchangeable types.
· Insertion part is 6.35 mm. Can also be used with commercially available 6.35 mm tool bits.Standard Price: MYR 74.13 Days to Ship: 8 Day(s) -
Standard Price: MYR 58.20 Days to Ship: 8 Day(s) -
Standard Price: MYR 53.84 Days to Ship: 8 Day(s) -
Offset Ratchet Driver With Forward/Reverse Switch
SUNFLAG
[Features]
· Has a convenient ratchet function.
· Comes with a quick-turning dial useful for temporary tightening.
· With a forward/reverse switch.
· Torque is greatly improved with special steel.Standard Price: MYR 110.52 Days to Ship: 9 Day(s) -
SUNFLAG
[Features]
· Ultra-thin (22 mm), it is ideal for working in narrow spaces and alongside walls.
· With a convenient ratchet function.
· The torque has been improved even further by the use of shock-resistant gears.
· L-type handle that makes it easy to apply force.
[Applications]
· For work operations in narrow spaces and near walls.Standard Price: MYR 78.41 Days to Ship: 8 Day(s) -
SUNFLAG
[Features]
· Can be used for hex socket screws such as cap screws and set screws.
· Even when the tip part wears off, the use of a hex shaft allows cutting the tip for long-term use as a hex wrench.
· The thread hole can be caught easily and turned from an angle.Standard Price: MYR 23.67- Days to Ship: 5 Day(s) or more -
Standard Price: MYR 106.47 Days to Ship: 9 Day(s) -
Standard Price: MYR 53.86 Days to Ship: 8 Day(s) -
Standard Price: MYR 55.24 Days to Ship: 8 Day(s) -
Piercing Screwdriver (Incorporating Magnet)
TRUSCO NAKAYAMA
[Features]
· Features a non-slip ergonomically designed grip.
· The hexagon nut attached to the base of the shaft can be used together with a wrench to enable strong turning.Standard Price: MYR 38.80- Days to Ship: 8 Day(s) or more -
Screwdriver Set with Voltage Detector
TRUSCO NAKAYAMA
[Features]
· When the tip of the screwdriver is brought into contact with an outlet, etc., and you press the rear end of the grip, the neon tube inside the grip activates and you can see the current flow.
· Suitable for checking the presence or absence of electric current in the electric wire.Standard Price: MYR 52.35 Days to Ship: 5 Day(s) or more -
"Long Magazine Bit Screwdriver" (Magnetic)
TRUSCO NAKAYAMA
[Features]
· Supports 8 sizes with a single unit.
· The head of the main body is an open type magnetic cap specification and can be used to store 7 bits.
· The magnet prevents internal fluctuations, which allows for smooth work and mitigates discomfort.
· It has an ergonomic handle certified by GS that's gentle on hands and prevents fatigue.Standard Price: MYR 158.39 Days to Ship: 29 Day(s) -
"Radial Ball Grip Switchable Screwdriver" (4 Sizes, Magnetic)
TRUSCO NAKAYAMA
[Features]
· Supports 4 sizes ((-) 6, (+) No.1, (+) No.2, (+) No.3) with a single unit.
· The radially processed grip does not become slippery even with greasy hands.
· It generates a powerful tightening torque, and has a strong ball cushioned grip.Standard Price: MYR 38.63 Days to Ship: 9 Day(s) -
TRUSCO NAKAYAMA
[Features]
· Can be used for a wide range of applications, such as in-factory work, maintenance of machinery and vehicles, etc.
· Commercially-available bits can be used with the hex holes on the rear of the handle, and deep screw tightening can be achieved by installing long bits.Standard Price: MYR 35.49- Days to Ship: 5 Day(s) or more -
TRUSCO NAKAYAMA
[Features]
· Tightening is possible even at a 25°tilt thanks to the ballpoint shape.Standard Price: MYR 25.96- Days to Ship: 6 Day(s) or more -
WERA
[Features]
· The lasered tip provides exceptional bite into screws.
· Special grip design provides an easy grip and comfortable fit.Standard Price: MYR 64.91- Days to Ship: 2 Day(s) or more -
WERA
[Features]
· The lasered tip provides exceptional bite into screws.
· Special grip design provides an easy grip and comfortable fit.
· Equipped with a bolster that can be firmly tightened with a wrench, etc.Standard Price: MYR 59.06- Days to Ship: 1 Day(s) or more -
Chisel Driver Set (Penetrating Type)
WERA
Special grip design provides an easy grip and comfortable fit.
Standard Price: MYR 837.78 Days to Ship: 8 Day(s) -
Craft Form Plus Chisel Screwdriver
WERA
[Features]
· A strike type through screwdriver.
· Equipped with a bolster that can be firmly tightened with a wrench, etc.
· Special grip design provides an easy grip and comfortable fit.Standard Price: MYR 78.76- Days to Ship: 8 Day(s) -
WERA
[Features]
· Uses a handle based on ergonomic design which is easy to carry, rotate and transmits torque reliably.Standard Price: MYR 43.95- Days to Ship: 8 Day(s) -
WERA
[Features]
· Uses a handle based on ergonomic design which is easy to carry, rotate and transmits torque reliably.
· This product conforms to European Standard EN100-015-1.Standard Price: MYR 51.13- Days to Ship: 8 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Tip standards |
| Tip size / Phillips (+) |
| Tip size / flathead (-) blade width (mm) B1 |
| Shaft length L (mm) |
| Single Product/Set Classification |
| Shaft type |
| Magnet |
| Shaft through |
| Bolster |
| Grip Type |
| Tip size / flathead (-) blade thickness (mm) B2 |
| (Box/Hex/Ball-Point) Width Across Flats (mm) |
| (Box/Hex/Ball-Point) Width Across Flats (inch) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | ANEX | HIRAI KOGU | HIRAI KOGU | HIRAI KOGU | HIRAI KOGU | HIRAI KOGU | HIRAI KOGU | HIRAI KOGU | HIRAI KOGU | HIRAI KOGU | HIRAI KOGU | SUNFLAG | SUNFLAG | SUNFLAG | SUNFLAG | SUNFLAG | SUNFLAG | SUNFLAG | SUNFLAG | SUNFLAG | SUNFLAG | SUNFLAG | SUNFLAG | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | WERA | WERA | WERA | WERA | WERA | WERA |
| Product Series | "Mag Driver 22" Screwdriver (Magnetic)【1-5 Pieces Per Package】 | Strong Square Pass-Through Shank Screwdriver (Pass-Through, Magnetic) | Mighty Grip Square Shaft Screwdriver Set (Magnetic) 【2 Pieces Per Package】 | "Radial Ball Grip Switchable Screwdriver" (4 Sizes, Magnetic) | |||||||||||||||||||||||||||||||||||||||||
| Days to Ship | 5 Day(s) or more | 9 Day(s) | 9 Day(s) | 9 Day(s) | 8 Day(s) | 9 Day(s) | 9 Day(s) | 5 Day(s) or more | 9 Day(s) | 9 Day(s) | 9 Day(s) | 8 Day(s) or more | 8 Day(s) | 8 Day(s) or more | 8 Day(s) | 9 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 15 Day(s) | 9 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 9 Day(s) | 8 Day(s) | 5 Day(s) or more | 9 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) or more | 5 Day(s) or more | 29 Day(s) | 9 Day(s) | 5 Day(s) or more | 6 Day(s) or more | 2 Day(s) or more | 1 Day(s) or more | 8 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) or more |
| Tip standards | Flathead (-) | Other | Flathead (-) | Phillips (+)/Flathead(-) | Phillips (+) / Phillips (+)/Flathead(-) | Phillips (+)/Flathead(-) | Phillips (+)/Flathead(-) | Phillips (+)/Flathead(-) | Combination | Phillips (+)/Flathead(-) | Phillips (+)/Flathead(-) | Phillips (+) / Flathead (-) / Phillips (+)/Flathead(-) | Phillips (+) / Flathead (-) | Phillips (+) / Flathead (-) | Phillips (+)/Flathead(-) | Phillips (+)/Flathead(-) | Combination | Flathead (-) | Phillips (+)/Flathead(-) | Other | Other | Phillips (+)/Flathead(-) | Phillips (+)/Flathead(-) | Phillips (+) | Phillips (+) / Flathead (-) | Phillips (+)/Flathead(-) | Other | Combination | Phillips (+)/Flathead(-) | Ballpoint | Torx | Other | Other | Phillips (+) / Flathead (-) | Combination | Combination | Phillips (+)/Flathead(-) | Phillips (+) / Flathead (-) / Phillips (+)/Flathead(-) | Ballpoint | Phillips (+) / Flathead (-) | Phillips (+) / Flathead (-) | Phillips (+)/Flathead(-) | Phillips (+) / Flathead (-) | Phillips (+) / Flathead (-) | Phillips (+) / Flathead (-) |
| Tip size / Phillips (+) | - | - | - | No.2 | No.1 / No.2 / No.3 | No.2 | No.2 | No.1 / No.2 / No.3 | No.1 / No.2 / No.3 | No.2 | No.1 / No.2 / No.3 | No.1 / No.2 | No.2 | No.2 / No.3 | No.00 / No.0 | No.1 / No.2 | No.1 / No.2 | - | No.2 | - | - | No.2 | - | No.1 / No.2 | No.2 | - | - | - | - | - | - | - | - | No.1 / No.2 / No.3 | No.1 / No.2 | No.0 / No.1 / No.2 | No.1 / No.2 / No.3 | No.2 | - | No.0 / No.1 / No.2 / No.3 / No.4 | No.0 / No.1 / No.2 / No.3 | No.1 / No.2 / No.3 | No.1 / No.2 / No.3 / No.4 | No.00 / No.0 / No.1 | No.00 / No.0 / No.1 |
| Tip size / flathead (-) blade width (mm) B1 | - | - | - | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 5.5 ～ 6.3 | 6.3 | 6 ～ 8 | 2.5 ～ 4 | 6 | 6 | 18 | 6 | - | - | 4.5 ～ 6 | 6 | - | 6 | 4.5 | - | 4.5 ～ 7 | 6 | - | - | - | - | 5.5 ～ 8 | 3 ～ 5 | 4.5 ～ 6.5 | 6 | 6 | - | 5 ～ 12 | 3.5 ～ 10 | 3.5 ～ 9 | 3.5 ～ 14 | 0.8 ～ 4 | 1.2 ～ 4 |
| Shaft length L (mm) | - | - | - | 135 | 9 | - | - | - | - | - | - | 100 ～ 250 | 100 ～ 200 | 100 ～ 150 | - | - | - | 75 | 100 | 130 | 125 | - | 100 | 50 ～ 110 | 95 | - | 75 | - | - | 51 ～ 122 | - | 100 | 100 | 75 ～ 150 | - | 128 | 100 | - | 60 ～ 190 | 60 ～ 300 | 60 ～ 175 | 80 ～ 150 | 80 ～ 250 | 40 ～ 100 | 40 ～ 80 |
| Single Product/Set Classification | Single Item | Single Item | Single Item | Single Item | Single Item / Set Product | Single Item | Single Item | Set Product | Set Product | Single Item | Set Product | Single Item / Set Product | Single Item | Single Item | Set Product | Single Item | Set Product | Single Item | Set Product | Single Item | Single Item | Set Product | Single Item | Single Item | Single Item | Set Product | Single Item | Set Product | Set Product | Single Item | Set Product | Single Item | Single Item | Single Item | Set Product | Set Product | Single Item | Single Item / Set Product | Single Item / Set Product | Single Item | Single Item | Set Product | Single Item | Single Item | Single Item |
| Shaft type | Round | - | Round | Square | - | Round | Round | Round | Square | Round | Round | Round | Round | Square | Round | Square | Square | Square | Square | Round | Round | - | Square | Round | Round | Round | Square | - | - | Square | - | Round | Round | Round | Round | Round | Round | - | Square | Round | Square | Round | Round | Round | Round |
| Magnet | NA | NA | NA | Available | Available | NA | NA | NA | NA | NA | NA | Available | Available | Available | NA | Available | Available | NA | Available | NA | NA | NA | NA | Available | Available | NA | NA | NA | NA | NA | NA | NA | NA | Available | NA | Available | Available | NA | NA | NA | NA | NA | NA | NA | NA |
| Shaft through | NA | NA | NA | - | - | - | - | - | - | - | - | NA | NA | Available | - | - | - | NA | NA | NA | NA | - | - | - | - | - | NA | - | - | NA | - | NA | NA | Available | NA | NA | - | - | NA | NA | NA | Available | Available | NA | NA |
| Bolster | NA | NA | NA | - | - | - | - | - | - | - | - | NA | NA | NA | - | - | - | NA | NA | NA | NA | - | - | NA | Included | - | NA | - | - | NA | - | NA | NA | Included | NA | NA | NA | - | NA | NA | Included / NA | Included | Included / NA | NA | NA |
| Grip Type | Resin | Resin | Resin | Rubber | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Rubber | Rubber | Resin | Resin | Resin | Resin | Resin | Rubber | Resin | Resin | Resin | Rubber | Resin | Rubber | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Rubber | Resin | Rubber | Rubber | Resin | Resin | Rubber | Rubber | Rubber | Rubber | Rubber | Rubber |
| Tip size / flathead (-) blade thickness (mm) B2 | - | - | - | - | - | - | - | - | - | - | - | 0.7 ～ 0.9 | 0.8 | 0.9 ～ 1.1 | - | 0.8 | - | 1.6 | 0.8 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| (Box/Hex/Ball-Point) Width Across Flats (mm) | - | - | - | - | - | - | - | - | 4 ～ 6 | - | - | - | - | - | - | - | 2.5 ～ 6 | - | - | - | - | - | - | - | - | - | - | - | - | 1.5 ～ 8 | - | - | - | - | - | - | - | - | 1.5 ～ 10 | - | - | - | - | - | - |
| (Box/Hex/Ball-Point) Width Across Flats (inch) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Tip standards
- Phillips (+)
- Flathead (-)
- Phillips (+)/Flathead(-)
- Torx
- Box
- Hexagon
- Ballpoint
- Combination
- Other
-
Tip size / Phillips (+)
- No.000
- No.00
- No.0
- No.1
- No.2
- No.3
- No.4
- Other
-
Tip size / flathead (-) blade width (mm) B1
-
Shaft length L (mm)
- 5
- 9
- 10
- 11
- 13
- 14
- 15
- 16
- 17
- 18
- 18～90
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 28
- 30
- 35
- 36
- 38
- 40
- 41
- 45
- 50
- 51
- 57
- 60
- 60, 75, 80
- 60, 80, 100
- 65
- 66
- 67
- 70
- 75
- 75 (PGMD-075), 100 (PGMD-100), 25 (PGSD-M2), 75 (PGPD-001), 100 (PGPD-002), 150 (PGPD-003), 25 (PGSD-P2)
- 75 (PGMD-075), 100 (PGMD-100), 150 (PGMD-150), 25 (PGSD-M2), 75 (PGPD-001), 100 (PGPD-002), 150 (PGPD-003), 25 (PGSD-P2)
- 75 (PGMD-075), 100 (PGMD-100), 150 (PGMD-150), 75 (PGPD-001), 100 (PGPD-002), 150 (PGPD-003)
- 75~150
- 76
- 80
- 80, 100, 125
- 82
- 85
- 89
- 90
- 95
- 100
- 102
- 103
- 105
- 107
- 110
- 115
- 120
- 122
- 125
- 128
- 130
- 135
- 138
- 140
- 145
- 150
- 152
- 153
- 160
- 165
- 167
- 170
- 175
- 180
- 190
- 195
- 200
- 220
- 225
- 230
- 240
- 250
- 267
- 275
- 288
- 300
- 320
- 390
- 400
- 450
- 500
- 600
-
Single Product/Set Classification
- Single Item
- Set Product
-
Shaft type
-
Magnet
- Available
- NA
-
Shaft through
- Available
- NA
-
Bolster
- Included
- NA
-
Grip Type
- Resin
- Wooden handle
- Rubber
- Stainless Steel
-
Tip size / flathead (-) blade thickness (mm) B2
-
(Box/Hex/Ball-Point) Width Across Flats (mm)
-
(Box/Hex/Ball-Point) Width Across Flats (inch)
Narrow search by specifying Manufacturer
-
- VESSEL (68)
- PB SWISS TOOLS (47)
- ANEX (41)
- WERA (40)
- ENGINEER (39)
- TONE (30)
- KTC(KYOTO TOOL) (28)
- HOZAN (23)
- WIHA (20)
- TRUSCO NAKAYAMA (16)
- HIRAI KOGU (14)
- SUNFLAG (14)
- KO-KEN TOOL (11)
- SK 11 (6)
- EIGHT TOOL (4)
- E VALUE (2)
- HAZET (2)
- SIGNET (2)
- TOP (2)
- HANDIWORK (1)
- MITOLOY (1)
- SMATO (1)
- TRAD (1)
- ARC (0)
- FUJIYA (0)
- HIOS (0)
- SUEKAGE TOOL (0)
- AS ONE (0)
- ESCO (0)
- BONDHUS (0)
- WILLIAMS (0)
CAD
-
- 2D
- 3D
Related Categories to Screwdrivers
-
- Wrenches / Offset Wrenches / Ratchet Wrenches
- Hex Wrenches
- Monkey Wrenches
- Torx Wrenches
- Socket Wrenches
- Torque Wrenches
- Screwdrivers
- Torque Screwdrivers
- Pliers/Nippers/Pincers
- Hammers
- Tool Sets / Tool Boxes
- Cutter Knives
- Chisels
- Screwdriver Bits
- Socket Bits
- Crowbars
- Pullers
- Tweezers
- Engravers/Punches
- Vehicle Maintenance Tools
- Tools for Water Supply Faucets and Air-Conditioning Piping
- Cutting Tools
- Insulation Tools
- Sheet Metal Tools
- Explosion-Proof Hand Tools
- Caulking Tools
- Tools Used at Electric Facilities
- Crowbars
-
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy