(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Screwdrivers
| Days to Ship |
|
|---|
-
Interchangeable Screwdrivers D-52, D-54, D-58
HOZAN
Screwdriver with interchangeable shaft.
[Features]
· The tip is a combination of Phillips and flathead shapes.
· Tip size: D-52 +No. 00 / -2.5 X 0.4, D-54 +No. 1 / -4.0 X 0.55, D-58 +No. 2 / -5.5 X 0.9.Standard Price: MYR 35.01 Days to Ship: 9 Day(s) -
Interchangeable Screwdriver Set D-44
HOZAN
Screwdriver set with interchangeable shafts.
[Features]
· Bargain 3-piece set.
· Chuck case included.Standard Price: MYR 116.94 Days to Ship: 1 Day(s) -
SwissGrip Straight-slot Screwdriver
PB SWISS TOOLS
Screwdriver made from 2 new materials: polypropylene and santoprene.
[Features]
· The symbol and size of the driver tip shape are shown on the rear of the handle.
· A screwdriver suited for the task can be selected quickly.
· The handle shape features the same ergonomic design as the Multi-craft.
· The carefully selected surface material is close to the hardness of human hands, making it feel soft and warm.
· With a special surface structure, the handle can be grasped firmly even with wet hands.
· Resistant to oil and gasoline, allowing it to be easily cleaned. Heat resistance of 140°C.
[Applications]
· Convenient for high-tech fields, assembly lines, and home use. Ideal for rapid turning.Standard Price: MYR 69.75 Days to Ship: 1 Day(s) -
Multi Craft Flathead Screwdriver
PB SWISS TOOLS
A screwdriver which ensures the maximum hand torque, due to its round basic form.
[Features]
· Easy torque application due to large outer diameter.
· The handle shape with large grooves provides a sure grip.
· Demonstrates its true value when used for the harshest work.
· Tough CAB plastic is extremely rigid and can withstand strong impacts.
· The structured surface allows it to be reliably held even with an oily hand.
[Applications]
· Ideal for use in manufacturing industries, assembly sites, repair plants, etc. where resistance to various substances and durability are required.Standard Price: MYR 56.10- Days to Ship: 9 Day(s) -
KTC(KYOTO TOOL)
[Features]
· It is a resin grip that is hard, durable, and prevents dirt.
· The shaft is round.
[Applications]
· General purpose toolStandard Price: MYR 15.74- Days to Ship: 9 Day(s) -
No.TD-51 Precision Screwdriver
VESSEL
Precision screwdriver (Phillips, flathead).
[Features]
· Main body stainless steel (end cap part is made of resin).
· Includes a cushioning grip that supports fastening.
[Applications]
· For assembly, disassembly and repair of precision instruments, cameras, watches, eyeglasses, etc.Standard Price: MYR 32.31 Days to Ship: 9 Day(s) -
Ceramic Adjustable Screwdriver (With Rotating Cap)
ENGINEER
Ceramic adjustment screwdriver with a compact design ideal for trimmer adjustment with lines.
[Features]
· It can be adjusted at 2 locations, the tip portion (+/- bit), and the shaft portion (hexagonal type).
· High-strength, long lasting, completely non-inductive high frequency adjustment driver made of new zirconia-based fine ceramics.
· The compact design of the included rotating cap's compact handle makes it easy to use.
[Applications]
· For adjustment work of variable coil, IFT and trimmer.Standard Price: MYR 54.03- Days to Ship: 9 Day(s) -
Ceramic Adjustable Screwdriver D-271/D-272/D-275
HOZAN
A long screwdriver that's convenient for adjustment inside equipment.
[Features]
· Uses zirconia ceramic that stands out among fine ceramics specifically for its exceptional strength and elasticity.
· Has high abrasion resistance and maintains cutting edge precision for a long time even for tip-type semi-fixed knob adjustment work.
[Applications]
· The 110 mm long shaft makes it ideal for adjusting parts in deep places.Standard Price: MYR 103.95- Days to Ship: 1 Day(s) or more -
TONE
Baby screwdriver with round shaft.
[Features]
· Convenient for adjustment of metering and precision equipment, etc.
[Applications]
· Ideal for assembly and maintenance of electronic devices and precision equipment.
· Ideal for assembly and maintenance work automobiles, motorcycles and bicycles.Standard Price: MYR 18.25 Days to Ship: 9 Day(s) -
HOZAN
Driver for adjusting the ferrite core and pre-set knobs (with and without dial).
[Features]
· Material adopts polyacetal excellent in high insulation and wear resistance.
· It does not damage the core or cause misalignment.
· Tip size: 2.3 X 0.4, 3.6 X 0.4 (with guide).Standard Price: MYR 15.53 Days to Ship: 9 Day(s) -
HOZAN
Driver for adjusting the ferrite core and pre-set knobs (with and without dial).
[Features]
· Material adopts polyacetal excellent in high insulation and wear resistance.
· It does not damage the core or cause misalignment.
· D-16 set includes: D-16-1B/D-16-2B/D-16-3B/D-16-4B/D-16-5.
· Color D-16-1B to 4B Blue / D-16-5 White.
· Weight 45 g.Standard Price: MYR 29.10 Days to Ship: 9 Day(s) -
Interchangeable Ceramic Adjustable Screwdriver D-280
HOZAN
· A perfect driver for adjusting pre-set knobs/capacitors on printed circuit boards.
[Features]
· Uses zirconia ceramic that does not cause coil misalignment.
· Has greater durability against wear and damage than alumina ceramics.
* Alumina ceramic: Fine ceramic. Besides abrasion resistance, it is excellent in heat and chemical resistance.
[Applications]
· Combination: D-280, -0.9 x -1.8 mm, blade thickness 0.4 mm (D-282), -1.3 x -2.6 mm, blade thickness 0.4 mm (D-283).Standard Price: MYR 283.05 Days to Ship: 9 Day(s) -
TONE
Baby screwdriver with round shaft.
[Features]
Convenient for adjustment of metering and precision equipment, etc.
[Applications]
· For assembly and maintenance of electronic devices and precision equipment.
· Assembly and maintenance work of automobiles, motorcycles and bicycles.Standard Price: MYR 16.43 Days to Ship: 9 Day(s) -
Ceramic Adjustment Screwdriver Set D-17 【3 Pieces Per Package】
HOZAN
A long screwdriver that's convenient for adjustment inside equipment.
[Features]
· With a sewn case that is resistant to friction and pulling.
· Uses zirconia ceramic that stands out among fine ceramics specifically for its exceptional strength and elasticity.
· Has high abrasion resistance and maintains cutting edge precision for a long time even for tip-type semi-fixed knob adjustment work.
[Applications]
· The 110 mm long shaft makes it ideal for adjusting parts in deep places.Standard Price: MYR 297.39 Days to Ship: 9 Day(s) -
HOZAN
Adjustment driver that uses metal only at the tip to eliminate adjustment deviation.
[Features]
· Blade width: 2, blade thickness: 0.5, shaft length: 100 mm.
· Material: Stainless steel (tip), cellulose acetate (shaft).
[Applications]
· Can also be used for tip models (surface-mount device type).Standard Price: MYR 23.22 Days to Ship: 8 Day(s) -
ENGINEER
Standard-type Phillips screwdrivers and flathead screwdrivers.
[Features]
· Selection of various sizes is enabled in accordance with work applications.
[Applications]
· For work tightening and removing Phillips screws/flathead screws.Standard Price: MYR 15.81- Days to Ship: 9 Day(s) -
ENGINEER
Knurled driver can perform rapid turning.
[Features]
· The shaft is made of chrome-vanadium steel, and the tip has undergone black point processing.
· A large grip that produces high clamping force.
[Applications]
· For tightening and removing various screws.Standard Price: MYR 25.35 Days to Ship: 9 Day(s) -
Mini Soft Screw Driver DG-21 – 24
ENGINEER
Mini soft screwdriver ideal for tightening and removing various screws.
[Features]
· It is a soft grip which fits well in the hand.
· The shaft is chrome-vanadium steel.
· The tip has been black-point processed.
[Applications]
· For tightening and removing various screws.Standard Price: MYR 32.13- Days to Ship: 8 Day(s) or more -
ENGINEER
This is a type of adjusting screwdriver with a 3 mm tip.
[Features]
· 3 mm tip type with semi-fixed resistance for trimmer capacitors.
· With a clip, it is convenient for carrying around.
[Applications]
· Ideal for adjusting electronic substrate circuit boards.Standard Price: MYR 28.95 Days to Ship: 9 Day(s) -
Adjustment Screwdriver (for High Frequency)
ENGINEER
This is a type of adjusting screwdriver with a 3 mm tip, which is used for high frequencies.
[Features]
· For high frequency.
· 3 mm tip type with semi-fixed resistance for trimmer capacitors.
· The tip is a tough SK material bit.
[Applications]
· Ideal for adjusting electronic substrate circuit boards.Standard Price: MYR 18.35- Days to Ship: 9 Day(s) -
Flathead Screwdriver Stand (Standard)
PB SWISS TOOLS
flathead screwdriver with outstanding impact resistance.
[Features]
・Can be used for general purposes. Recyclable grip. 100-6 to 9 have a square shaft part for hanging a wrench on the shaft.
・The grip surface fits comfortably in your hand and the grooves are designed with ergonomics in mind, making it possible to apply large amounts of torque.
・High-grade transparent CAB material is extremely impact resistant, oil and gasoline resistant, and recyclable.
・Skin-friendly and comfortable grip. Vanilla aroma is mixed in to suppress the odor.
・Impact resistance is 1t. Resistant to oil and gasoline.
[Applications]
- Ideal for industry, assembly sites, repairs, handicrafts by craftsmen, DIY, hobbies, etc.Standard Price: MYR 47.90- Days to Ship: 9 Day(s) -
PB SWISS TOOLS
A screwdriver with excellent shock resistance which can be used for general purposes.
[Features]
· Screwdriver with excellent track record, millions of units sold over the past several decades.
· The grip surface fits the hand and the groove design is ergonomic, allowing high torque to be applied.
· The high quality and transparent CAB material is extremely resistant to impacts as well as resistant to oil and gasoline, and can be recycled.
[Applications]
· Used in various fields such as manufacturing industries, assembly sites, repairs, artisan handcrafting, DIY, hobbies, and more.Standard Price: MYR 93.16 Days to Ship: 9 Day(s) -
Flathead Screwdriver (for Electrician)
PB SWISS TOOLS
[Features]
· Its long and thin grip is ideal for precision electrical work.
· The grip surface is satin finish, making it less slippery.Standard Price: MYR 64.18- Days to Ship: 8 Day(s) -
Screwdriver with AC/DC Tester (with Pocket Clip)
PB SWISS TOOLS
A voltage detection screwdriver combining 2 functions into one tool.
[Features]
· Often used by electricians.
· Ergonomically shaped groove allows large force to be transmitted.
· Size 0 for PB175 includes a practical integrated clip which can clasp onto jackets or trousers.
· The steel precision blade has a voltage check function and can also be used as a normal screwdriver.
[Applications]
· Ideal for use as a voltage checker and a screwdriver.Standard Price: MYR 85.76 Days to Ship: 1 Day(s) -
Screwdriver Set, PB 250(7 pieces set) 【1-7 Pieces Per Package】
PB SWISS TOOLS
A set of screwdrivers.
[Features]
· A new color insert type has joined the most popular, classic handle Phillips/flathead screwdrivers.
· Facilitates tool management by color-coding inserts by person or departmentStandard Price: MYR 312.69- Days to Ship: 5 Day(s) or more -
PB SWISS TOOLS
A set of screwdrivers. Holder included.
[Features]
· A new color insert type has joined the most popular, classic handle Phillips/flathead screwdrivers.
· Facilitates tool management by color-coding inserts by person or departmentStandard Price: MYR 294.30- Days to Ship: 5 Day(s) or more -
AC/DC Voltage Detector (Standard)
PB SWISS TOOLS
[Features]
· A standard electroscopic screwdriver.
· Operating range 110 to 250 V, 50 to 500 Hz.
· Operating Temperature Range: -10 to 59°CStandard Price: MYR 143.20 Days to Ship: 7 Day(s) or more -
Ceramic Adjustment Screwdriver No.9000
VESSEL
Adjustment screwdriver.
[Features]
· The cutting edge is made of nonmagnetic ceramic.
· Uses a non-conductive and nonmagnetic zirconia ceramic tip.
· For coil and trimmer adjustment.
[Applications]
· For the adjustment of electronic components and audio/computer/communication equipment.Standard Price: MYR 64.92- Days to Ship: 9 Day(s) -
Megadora Thin-handle Screwdriver No.910
VESSEL
Thin shaft screwdriver.
[Features]
· Fine shaft type with a diameter of 4 mm or less.
· The blade has a black point treatment without a thick plating layer.
[Applications]
· It is convenient especially when working on deep and narrow places.Standard Price: MYR 42.53- Days to Ship: 8 Day(s) or more -
Soft Finish® ESD Screwdriver Set (Set of 5)
WIHA
A 5-piece screwdriver set of Soft Finish® ESD anti-static stubby screwdrivers, including 3 Phillips screwdrivers and 2 flathead screwdrivers.
Standard Price: MYR 419.53 Days to Ship: 4 Day(s) or more -
Ceramic Adjustment Screwdriver DA-48 – 52
ENGINEER
Multifunction ceramic adjustment driver that enables 4 types of trimmer adjustment with the 1 tool.
[Features]
· Uses tough zirconia-based fine ceramic bit.
· For high frequency area adjustment with complete non-inductive properties.
· Also ideal as a short-circuit prevention screwdriver for board protection.
· There are 2 bits at both ends to enable 4 kinds of adjustment. (Tip: +/- Bit, Shaft: Hex)
· Pencil-type portable design with caps for protecting tip.
[Applications]
· For audio equipment such as tuners and amplifiers, TVs, video cameras, and radio related equipment.
· For work related to wireless devices, computers and communications.Standard Price: MYR 140.81- Days to Ship: 8 Day(s) or more -
Ceramic Adjustment Screwdriver, Detachable DA-72 – 79
ENGINEER
Thin-shaft ceramic adjustment screwdriver that's ideal for trimmer adjustment of deep areas.
[Features]
· High-strength, long lasting, completely non-inductive high frequency adjustment driver made of new zirconia-based fine ceramics.
· It can be adjusted at 2 locations, the tip portion (+/- bit), and the shaft portion (hexagonal type).
· Since the shaft portion and the handle can be detached, it is also possible to use it mounted on machines, etc.
[Applications]
· This fine shaft type is ideal for adjustment of chassis parts and other deep areas.Standard Price: MYR 85.03- Days to Ship: 9 Day(s) -
Ceramic Adjustment Screwdriver Set DK-90
ENGINEER
Multifunction ceramic adjustment driver that enables 4 types of trimmer adjustment with the 1 tool.
[Features]
· Uses tough zirconia-based fine ceramic bit.
· For high frequency area adjustment with complete non-inductive properties. Also ideal as a short-circuit prevention screwdriver for board protection.
· There are 2 bits at both ends to enable 4 kinds of adjustment (tip: Phillips, flathead bits / shank: hex).
· Pencil-type portable design with caps for protecting tip.
· 4 piece set of DA-48 and 50 to 52.
[Applications]
· For audio equipment such as tuners and amplifiers.
· For TV, video camera, radio-related, wireless equipment, computer-related facilities, communications equipment, etc.Standard Price: MYR 461.49 Days to Ship: 8 Day(s) -
ENGINEER
A mini soft screwdriver set with a soft grip which fits well in the hand.
[Features]
· It is a soft grip which fits well in the hand.
· The shaft is made of a special alloy steel used in the manufacturing industry, and has been hardened over the whole length.
· The tip has been black-point processed.
· It has a chrome plated finish.
[Applications]
· For tightening and removing various screws.Standard Price: MYR 113.28 Days to Ship: 8 Day(s) -
Standard Price: MYR 9.83 Days to Ship: 8 Day(s) -
Interchangeable Micro Screwdriver
WERA
Micro screwdriver set for precision work.
[Features]
・ Interchangeable.
・ Handle + bit set.
・ With a zone that can rotate quickly.
·Comes with a precision adjustment aim (hexagonal).
・ Designed to transmit stronger torque with your fingers.
・ Comes with a dedicated pouch that can be securely stored.
[Applications]
・ Ideal for assembling electronic parts, etc.Standard Price: MYR 683.55 Days to Ship: 9 Day(s) -
Interchangeable Flathead Blade for System 4
WIHA
[Features]
· This is a double-headed flathead interchangeable blade for System 4.
· Made of high-grade chrome vanadium molybdenum steel. Fully quenched. Chrome plating.
· The tip has undergone Chrome Top treatment, a colored coating.Standard Price: MYR 89.17 Days to Ship: 4 Day(s) or more -
ESD (Electrostatic Discharge) Slotted Screwdriver PB 8100 ESD
PB SWISS TOOLS
[Features]
· ESD (electrostatic discharge) straight slot screwdriver
· Parallel blade tip: transmits ideal force
· No cam-out effect
· SwissGrip handle
· ESD (electrostatic discharge)
· Surface resistance: 1 MΩ to 1 GΩStandard Price: MYR 61.21- Days to Ship: 9 Day(s) or more -
Slotted Screwdriver PB 8100 RB
PB SWISS TOOLS
[Features]
· Straight slot screwdriver
· Parallel blade tip
· Color-coded according to handle sizeStandard Price: MYR 128.11 Days to Ship: 9 Day(s) -
Screwdriver For Voltage Testing
PB SWISS TOOLS
Electroscopic screwdriver 110-250V, DIN VDE0680-6 compliant.
Standard Price: MYR 98.08 Days to Ship: 25 Day(s) or more -
SwissGrip Precision Set Screwdriver
PB SWISS TOOLS
High-precision screwdriver
[Features]
· Slip-resistant when gripped with wet hands. Resistant to oil/gasoline.
· Wipes clean when dirtyStandard Price: MYR 63.74- Days to Ship: 9 Day(s) or more -
SwissGrip ESD Precision Set Screwdriver
PB SWISS TOOLS
High-precision ESD screwdriver
[Features]
· Slip-resistant when gripped with wet hands. Wipes clean when dirty.
[Applications]
· Electrostatic discharge (ESD): Appropriate for general workplaces where there is a possibility of electrostatic charge or discharge causing danger or damageStandard Price: MYR 63.76- Days to Ship: 8 Day(s)
| Brand |
|---|
| Product Series |
| Days to Ship |
| Tip standards |
| Tip size / Phillips (+) |
| Tip size / flathead (-) blade width (mm) B1 |
| Shaft length L (mm) |
| Single Product/Set Classification |
| Shaft type |
| Magnet |
| Shaft through |
| Bolster |
| Grip Type |
| Tip size / flathead (-) blade thickness (mm) B2 |
| (Box/Hex/Ball-Point) Width Across Flats (mm) |
| (Box/Hex/Ball-Point) Width Across Flats (inch) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | HOZAN | HOZAN | PB SWISS TOOLS | PB SWISS TOOLS | KTC(KYOTO TOOL) | VESSEL | ENGINEER | HOZAN | TONE | HOZAN | HOZAN | HOZAN | TONE | HOZAN | HOZAN | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | PB SWISS TOOLS | PB SWISS TOOLS | PB SWISS TOOLS | PB SWISS TOOLS | PB SWISS TOOLS | PB SWISS TOOLS | PB SWISS TOOLS | VESSEL | VESSEL | WIHA | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ANEX | WERA | WIHA | PB SWISS TOOLS | PB SWISS TOOLS | PB SWISS TOOLS | PB SWISS TOOLS | PB SWISS TOOLS |
| Product Series | Ceramic Adjustment Screwdriver Set D-17 【3 Pieces Per Package】 | Screwdriver Set, PB 250(7 pieces set) 【1-7 Pieces Per Package】 | ESD (Electrostatic Discharge) Slotted Screwdriver PB 8100 ESD | |||||||||||||||||||||||||||||||||||||||
| Days to Ship | 9 Day(s) | 1 Day(s) | 1 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 1 Day(s) or more | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 8 Day(s) | 9 Day(s) | 9 Day(s) | 8 Day(s) or more | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 8 Day(s) | 1 Day(s) | 5 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 9 Day(s) | 8 Day(s) or more | 4 Day(s) or more | 8 Day(s) or more | 9 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 9 Day(s) | 4 Day(s) or more | 9 Day(s) or more | 9 Day(s) | 25 Day(s) or more | 9 Day(s) or more | 8 Day(s) |
| Tip standards | Phillips (+)/Flathead(-) | Phillips (+)/Flathead(-) | Flathead (-) | Flathead (-) | Flathead (-) | Flathead (-) | Flathead (-) | Flathead (-) | Flathead (-) | Flathead (-) | Combination | Flathead (-) | Flathead (-) | Phillips (+)/Flathead(-) | Flathead (-) | Flathead (-) | Flathead (-) | Flathead (-) | Flathead (-) | Flathead (-) | Flathead (-) | Flathead (-) | Flathead (-) | Flathead (-) | Flathead (-) / Phillips (+)/Flathead(-) | Flathead (-) / Phillips (+)/Flathead(-) | Flathead (-) | Flathead (-) | Flathead (-) | Phillips (+)/Flathead(-) | Flathead (-) | Flathead (-) | Phillips (+)/Flathead(-) | Phillips (+)/Flathead(-) | Flathead (-) | Combination | Flathead (-) | Flathead (-) | Flathead (-) | Flathead (-) | Flathead (-) | Flathead (-) |
| Tip size / Phillips (+) | No.00 | No.00 / No.1 / No.2 | - | - | - | - | - | - | - | - | - | - | - | No.0 | - | - | - | - | - | - | - | - | - | - | No.1 / No.2 | No.1 / No.2 | - | - | - | No.0 / No.1 / No.2 | - | - | Other | No.00 / No.0 | - | No.00 / No.0 / No.1 | - | - | - | - | - | - |
| Tip size / flathead (-) blade width (mm) B1 | 2.5 | 2.5 ～ 5.5 | 3.5 | 2.5 ～ 3.5 | 2.5 ～ 3 | 3 ～ 3.5 | 0.9 ～ 1.3 | 1.3 ～ 1.8 | 3 | 2.3 ～ 3.6 | 1.35 ～ 3.6 | 0.9 ～ 2.6 | 3 | 1.3 ～ 1.8 | 2 | 4 | 4.3 | 3 ～ 4 | 2 | 2 | 2.5 ～ 3.5 | 3.5 | 2.5 ～ 3.5 | 2.5 | 3.5 ～ 10 | 3.5 ～ 10 | 3 | 1.3 ～ 3.4 | 3 ～ 4 | 3 ～ 4 | 0.9 ～ 2.5 | 0.9 ～ 2.4 | 0.8 ～ 2.5 | 3 ～ 4 | 2.5 | - | 1.5 ～ 3 | 2.5 | - | 2.5 | 2 ～ 3 | 2 ～ 3 |
| Shaft length L (mm) | 57 | 57 | 90 | 80 ～ 90 | 50 ～ 75 | 26 ～ 28 | 18 | 110 | 75 | - | - | - | 50 | 110 | 100 | 75 ～ 100 | 100 | 80 | 16 ～ 24 | 100 ～ 150 | 80 ～ 90 | 150 | 80 ～ 90 | 50 | 90 ～ 180 | 90 ～ 180 | 50 | 15 ～ 30 | 75 ～ 200 | 60 ～ 100 | - | 17 ～ 20 | - | 80 | 100 | - | - | 80 ～ 90 | 90 | 50 | - | - |
| Single Product/Set Classification | Single Item | Set Product | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Set Product | Set Product | Single Item | Set Product | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Set Product | Set Product | Single Item | Single Item | Single Item | Set Product | Single Item | Single Item | Set Product | Set Product | Single Item | Set Product | Single Item | Single Item | Single Item | Single Item | - | - |
| Shaft type | Round | Round | Round | Round | Round | Round | Round | Round | Round | - | - | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | - | - | Round | Round | Round | - | - |
| Magnet | NA | NA | NA | NA | NA | NA | NA | NA | NA | - | - | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | Available | NA | NA | NA | NA | NA | NA | - | - | - | - | - | - | - |
| Shaft through | - | - | NA | NA | NA | NA | NA | NA | NA | - | - | - | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | - | - | NA | NA | - | - | - |
| Bolster | - | - | NA | NA | NA | NA | NA | NA | NA | - | - | - | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | - | - | NA | NA | - | - | - |
| Grip Type | Rubber | Rubber | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Rubber | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Rubber | Resin | Resin | Resin | Rubber | Resin | - | - | - | - | - | - | - |
| Tip size / flathead (-) blade thickness (mm) B2 | 0.4 | 0.4 ～ 0.9 | 0.5 | 0.4 ～ 0.5 | 0.4 | 0.4 ～ 0.5 | 0.4 | 0.4 | 0.4 | 0.4 | 0.4 ～ 1.2 | 0.4 | 0.4 | 0.4 | 0.5 | 0.5 | 0.5 | 0.4 ～ 0.5 | 0.5 | 0.5 | 0.4 ～ 0.5 | 0.5 | 0.4 ～ 0.5 | 0.5 | 0.5 ～ 1.6 | 0.5 ～ 1.6 | 0.5 | 0.4 ～ 0.5 | 0.4 ～ 0.5 | 0.5 ～ 0.8 | 0.4 ～ 0.7 | 0.4 | 0.35 ～ 0.7 | 0.4 ～ 0.5 | 0.4 | 0.23 ～ 0.5 | 0.25 ～ 0.5 | 0.4 ～ 0.5 | 0.5 | 0.5 | 0.4 ～ 0.5 | 0.4 ～ 0.5 |
| (Box/Hex/Ball-Point) Width Across Flats (mm) | - | - | - | - | - | - | - | - | - | - | 1.95 ～ 3.35 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1.5 ～ 2 | - | - | - | - | - | - |
| (Box/Hex/Ball-Point) Width Across Flats (inch) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Tip standards
- Phillips (+)
- Flathead (-)
- Phillips (+)/Flathead(-)
- Torx
- Box
- Hexagon
- Ballpoint
- Combination
- Other
-
Tip size / Phillips (+)
- No.000
- No.00
- No.0
- No.1
- No.2
- No.3
- No.4
- Other
-
Tip size / flathead (-) blade width (mm) B1
-
Shaft length L (mm)
- 5
- 9
- 10
- 11
- 13
- 14
- 15
- 16
- 17
- 18
- 18～90
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 28
- 30
- 35
- 36
- 38
- 40
- 41
- 45
- 50
- 51
- 57
- 60
- 60, 75, 80
- 60, 80, 100
- 65
- 66
- 67
- 70
- 75
- 75 (PGMD-075), 100 (PGMD-100), 25 (PGSD-M2), 75 (PGPD-001), 100 (PGPD-002), 150 (PGPD-003), 25 (PGSD-P2)
- 75 (PGMD-075), 100 (PGMD-100), 150 (PGMD-150), 25 (PGSD-M2), 75 (PGPD-001), 100 (PGPD-002), 150 (PGPD-003), 25 (PGSD-P2)
- 75 (PGMD-075), 100 (PGMD-100), 150 (PGMD-150), 75 (PGPD-001), 100 (PGPD-002), 150 (PGPD-003)
- 75~150
- 76
- 80
- 80, 100, 125
- 82
- 85
- 89
- 90
- 95
- 100
- 102
- 103
- 105
- 107
- 110
- 115
- 120
- 122
- 125
- 128
- 130
- 135
- 138
- 140
- 145
- 150
- 152
- 153
- 160
- 165
- 167
- 170
- 175
- 180
- 190
- 195
- 200
- 220
- 225
- 230
- 240
- 250
- 267
- 275
- 288
- 300
- 320
- 390
- 400
- 450
- 500
- 600
-
Single Product/Set Classification
- Single Item
- Set Product
-
Shaft type
-
Magnet
- Available
- NA
-
Shaft through
- Available
- NA
-
Bolster
- Included
- NA
-
Grip Type
- Resin
- Wooden handle
- Rubber
- Stainless Steel
-
Tip size / flathead (-) blade thickness (mm) B2
-
(Box/Hex/Ball-Point) Width Across Flats (mm)
-
(Box/Hex/Ball-Point) Width Across Flats (inch)
Narrow search by specifying Manufacturer
-
- PB SWISS TOOLS (14)
- ENGINEER (10)
- HOZAN (8)
- VESSEL (3)
- TONE (2)
- WIHA (2)
- ANEX (1)
- KTC(KYOTO TOOL) (1)
- WERA (1)
- SUNFLAG (0)
- ARC (0)
- HANDIWORK (0)
- MITOLOY (0)
- E VALUE (0)
- FUJIYA (0)
- HIOS (0)
- SMATO (0)
- SIGNET (0)
- SUEKAGE TOOL (0)
- TRAD (0)
- TOP (0)
- AS ONE (0)
- ESCO (0)
- BONDHUS (0)
- SK 11 (0)
- TRUSCO NAKAYAMA (0)
- HAZET (0)
- KO-KEN TOOL (0)
- EIGHT TOOL (0)
- HIRAI KOGU (0)
- WILLIAMS (0)
CAD
-
- 2D
- 3D
Related Categories to Screwdrivers
-
- Wrenches / Offset Wrenches / Ratchet Wrenches
- Hex Wrenches
- Monkey Wrenches
- Torx Wrenches
- Socket Wrenches
- Torque Wrenches
- Screwdrivers
- Torque Screwdrivers
- Pliers/Nippers/Pincers
- Hammers
- Tool Sets / Tool Boxes
- Cutter Knives
- Chisels
- Screwdriver Bits
- Socket Bits
- Crowbars
- Pullers
- Tweezers
- Engravers/Punches
- Vehicle Maintenance Tools
- Tools for Water Supply Faucets and Air-Conditioning Piping
- Cutting Tools
- Insulation Tools
- Sheet Metal Tools
- Explosion-Proof Hand Tools
- Caulking Tools
- Tools Used at Electric Facilities
- Crowbars
-
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy