(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Screwdrivers
| Days to Ship |
|
|---|
-
Interchangeable Screwdrivers D-52, D-54, D-58
HOZAN
Screwdriver with interchangeable shaft.
[Features]
· The tip is a combination of Phillips and flathead shapes.
· Tip size: D-52 +No. 00 / -2.5 X 0.4, D-54 +No. 1 / -4.0 X 0.55, D-58 +No. 2 / -5.5 X 0.9.Standard Price: MYR 35.01 Days to Ship: 9 Day(s) -
VESSEL
A set of three precision screwdrivers in sizes which are used frequently. Easy-to-use slender clip with a tip cap for quick turning.
[Features]
· Two types are available according to the type of precision work.
· Frequently used sizes make up a set.
[Applications]
· For adjustment and repair of precision instruments, electrical equipment, glasses, watches, etc.Standard Price: MYR 68.52 Days to Ship: 9 Day(s) -
Interchangeable Screwdriver Set D-44
HOZAN
Screwdriver set with interchangeable shafts.
[Features]
· Bargain 3-piece set.
· Chuck case included.Standard Price: MYR 116.94 Days to Ship: 1 Day(s) -
Slotted screwdriver D-630 – D-655
HOZAN
[Features]
· Designed to deal with the screws in hard-to-reach places by reducing the outer diameter of the screwdriver shaft.
· Hole diameter is compatible with deep screws like those in household appliances because the shaft has a thinner finish than even JIS standards.
· Even when thin, "torsional strength" abides by JIS standards.
· The basic hardening treatment for shaft strength is thermal hardening treatment involving skilled full quenching.
· The polypropylene grip with pen clip has both strength and lightness.
· It uses electroless nickel plating that's thin and tough in order to maintain accuracy, providing surface processing that emphasizes accuracy and strength.
[Applications]
· Convenient for tightening and loosening screws.Standard Price: MYR 23.79- Days to Ship: 1 Day(s) -
"Superfit" Precision Screwdriver
ANEX
[Features]
· Has a square cross-section to increase work efficiency.
· Soft grip is adopted.Standard Price: MYR 24.64 Days to Ship: 8 Day(s) -
Standard Price: MYR 125.69 Days to Ship: 8 Day(s) -
Multi Craft Flathead Screwdriver
PB SWISS TOOLS
A screwdriver which ensures the maximum hand torque, due to its round basic form.
[Features]
· Easy torque application due to large outer diameter.
· The handle shape with large grooves provides a sure grip.
· Demonstrates its true value when used for the harshest work.
· Tough CAB plastic is extremely rigid and can withstand strong impacts.
· The structured surface allows it to be reliably held even with an oily hand.
[Applications]
· Ideal for use in manufacturing industries, assembly sites, repair plants, etc. where resistance to various substances and durability are required.Standard Price: MYR 56.10 Days to Ship: 9 Day(s) -
KTC(KYOTO TOOL)
[Features]
· It is a resin grip that is hard, durable, and prevents dirt.
· The shaft is round.
[Applications]
· General purpose toolStandard Price: MYR 17.00 Days to Ship: 9 Day(s) -
Ceramic Adjustable Screwdriver (With Rotating Cap)
ENGINEER
Ceramic adjustment screwdriver with a compact design ideal for trimmer adjustment with lines.
[Features]
· It can be adjusted at 2 locations, the tip portion (+/- bit), and the shaft portion (hexagonal type).
· High-strength, long lasting, completely non-inductive high frequency adjustment driver made of new zirconia-based fine ceramics.
· The compact design of the included rotating cap's compact handle makes it easy to use.
[Applications]
· For adjustment work of variable coil, IFT and trimmer.Standard Price: MYR 54.03- Days to Ship: 9 Day(s) -
Screwdriver Set (8 pieces set)
TRUSCO NAKAYAMA
A set made up of tools with electrician's grips for sizes that are frequently used.
Standard Price: MYR 104.24 Days to Ship: 9 Day(s) -
Ceramic Adjustable Screwdriver D-271/D-272/D-275
HOZAN
A long screwdriver that's convenient for adjustment inside equipment.
[Features]
· Uses zirconia ceramic that stands out among fine ceramics specifically for its exceptional strength and elasticity.
· Has high abrasion resistance and maintains cutting edge precision for a long time even for tip-type semi-fixed knob adjustment work.
[Applications]
· The 110 mm long shaft makes it ideal for adjusting parts in deep places.Standard Price: MYR 103.95 Days to Ship: 9 Day(s) -
Interchangeable Ceramic Adjustable Screwdriver D-280
HOZAN
· A perfect driver for adjusting pre-set knobs/capacitors on printed circuit boards.
[Features]
· Uses zirconia ceramic that does not cause coil misalignment.
· Has greater durability against wear and damage than alumina ceramics.
* Alumina ceramic: Fine ceramic. Besides abrasion resistance, it is excellent in heat and chemical resistance.
[Applications]
· Combination: D-280, -0.9 x -1.8 mm, blade thickness 0.4 mm (D-282), -1.3 x -2.6 mm, blade thickness 0.4 mm (D-283).Standard Price: MYR 283.05 Days to Ship: 9 Day(s) -
Ceramic Adjustment Screwdriver Set D-17 【3 Pieces Per Package】
HOZAN
A long screwdriver that's convenient for adjustment inside equipment.
[Features]
· With a sewn case that is resistant to friction and pulling.
· Uses zirconia ceramic that stands out among fine ceramics specifically for its exceptional strength and elasticity.
· Has high abrasion resistance and maintains cutting edge precision for a long time even for tip-type semi-fixed knob adjustment work.
[Applications]
· The 110 mm long shaft makes it ideal for adjusting parts in deep places.Standard Price: MYR 297.39 Days to Ship: 9 Day(s) -
Crystalline Screwdriver (Precision Type) No. 6900
VESSEL
Ultra-fine screwdriver ideal for precision work.
[Features]
· The grip is made of plant-derived crystalline that's eco-friendly and resistant to oil and chemicals.
· Color-coded by Phillips or flathead.
· For extremely precise work.
· The end of the handle has a concave shape that allows fingertips to be used to push against and perform quick turning.
· Cellulose acetate resin is used.
· Hexagonal cross section accurately transmits torque.
[Applications]
· General precision work.Standard Price: MYR 18.40 Days to Ship: 9 Day(s) -
ANEX
[Features]
· A long shaft type.
· Comes with rotating cap.
· Acetate Resin HandleStandard Price: MYR 22.04 Days to Ship: 8 Day(s) -
Precision Screwdriver Set (Set of 3)
HIRAI KOGU
[Features]
· A 2-way set with a variably adjustable shaft length (18-100 mm).
[Applications]
· Precision screwdriver.
· A screwdriver for watches, glasses, etc.Standard Price: MYR 51.42 Days to Ship: 8 Day(s) -
WERA
[Features]
· Uses a handle based on ergonomic design which is easy to carry, rotate and transmits torque reliably.Standard Price: MYR 44.58 Days to Ship: 8 Day(s) -
WERA
[Features]
· Uses a handle based on ergonomic design which is easy to carry, rotate and transmits torque reliably.
· This product conforms to European Standard EN100-015-1.Standard Price: MYR 51.13 Days to Ship: 8 Day(s) -
Flathead Screwdriver Stand (Standard)
PB SWISS TOOLS
flathead screwdriver with outstanding impact resistance.
[Features]
・Can be used for general purposes. Recyclable grip. 100-6 to 9 have a square shaft part for hanging a wrench on the shaft.
・The grip surface fits comfortably in your hand and the grooves are designed with ergonomics in mind, making it possible to apply large amounts of torque.
・High-grade transparent CAB material is extremely impact resistant, oil and gasoline resistant, and recyclable.
・Skin-friendly and comfortable grip. Vanilla aroma is mixed in to suppress the odor.
・Impact resistance is 1t. Resistant to oil and gasoline.
[Applications]
- Ideal for industry, assembly sites, repairs, handicrafts by craftsmen, DIY, hobbies, etc.Standard Price: MYR 47.90 Days to Ship: 9 Day(s) -
Flathead Screwdriver (for Electrician)
PB SWISS TOOLS
[Features]
· Its long and thin grip is ideal for precision electrical work.
· The grip surface is satin finish, making it less slippery.Standard Price: MYR 64.18 Days to Ship: 8 Day(s) -
Screwdriver with AC/DC Tester (with Pocket Clip)
PB SWISS TOOLS
A voltage detection screwdriver combining 2 functions into one tool.
[Features]
· Often used by electricians.
· Ergonomically shaped groove allows large force to be transmitted.
· Size 0 for PB175 includes a practical integrated clip which can clasp onto jackets or trousers.
· The steel precision blade has a voltage check function and can also be used as a normal screwdriver.
[Applications]
· Ideal for use as a voltage checker and a screwdriver.Standard Price: MYR 85.76 Days to Ship: 1 Day(s) -
Ceramic Adjustment Screwdriver No.9000
VESSEL
Adjustment screwdriver.
[Features]
· The cutting edge is made of nonmagnetic ceramic.
· Uses a non-conductive and nonmagnetic zirconia ceramic tip.
· For coil and trimmer adjustment.
[Applications]
· For the adjustment of electronic components and audio/computer/communication equipment.Standard Price: MYR 64.92 Days to Ship: 9 Day(s) -
Screwdriver, Famidora 8 No.TD-800
VESSEL
A screwdriver set for home and office.
[Features]
· A set of Phillips and flathead screwdrivers, pin remover, and drill.
· Ergonomic handle that fits the palm of the hand.
· Color-coded colorful screwdriver (replacement shaft).
· A convenient stand for storage.
[Applications]
· For homes and offices.Standard Price: MYR 89.15 Days to Ship: 9 Day(s) -
Ceramic Adjustment Screwdriver DA-48 – 52
ENGINEER
Multifunction ceramic adjustment driver that enables 4 types of trimmer adjustment with the 1 tool.
[Features]
· Uses tough zirconia-based fine ceramic bit.
· For high frequency area adjustment with complete non-inductive properties.
· Also ideal as a short-circuit prevention screwdriver for board protection.
· There are 2 bits at both ends to enable 4 kinds of adjustment. (Tip: +/- Bit, Shaft: Hex)
· Pencil-type portable design with caps for protecting tip.
[Applications]
· For audio equipment such as tuners and amplifiers, TVs, video cameras, and radio related equipment.
· For work related to wireless devices, computers and communications.Standard Price: MYR 142.95 Days to Ship: 8 Day(s) or more -
Ceramic Adjustment Screwdriver, Detachable DA-72 – 79
ENGINEER
Thin-shaft ceramic adjustment screwdriver that's ideal for trimmer adjustment of deep areas.
[Features]
· High-strength, long lasting, completely non-inductive high frequency adjustment driver made of new zirconia-based fine ceramics.
· It can be adjusted at 2 locations, the tip portion (+/- bit), and the shaft portion (hexagonal type).
· Since the shaft portion and the handle can be detached, it is also possible to use it mounted on machines, etc.
[Applications]
· This fine shaft type is ideal for adjustment of chassis parts and other deep areas.Standard Price: MYR 85.52- Days to Ship: 9 Day(s) -
Ceramic Adjustment Screwdriver Set DK-90
ENGINEER
Multifunction ceramic adjustment driver that enables 4 types of trimmer adjustment with the 1 tool.
[Features]
· Uses tough zirconia-based fine ceramic bit.
· For high frequency area adjustment with complete non-inductive properties. Also ideal as a short-circuit prevention screwdriver for board protection.
· There are 2 bits at both ends to enable 4 kinds of adjustment (tip: Phillips, flathead bits / shank: hex).
· Pencil-type portable design with caps for protecting tip.
· 4 piece set of DA-48 and 50 to 52.
[Applications]
· For audio equipment such as tuners and amplifiers.
· For TV, video camera, radio-related, wireless equipment, computer-related facilities, communications equipment, etc.Standard Price: MYR 461.49 Days to Ship: 8 Day(s) -
Standard Price: MYR 44.07 Days to Ship: 9 Day(s) -
TRUSCO NAKAYAMA
A ratchet mechanism is included, which turns the screw just by a repetitive motion of the wrist, without the need to re-grip the handle.
Standard Price: MYR 99.15 Days to Ship: 9 Day(s) -
Micro Screwdriver Set - 12 pcs
WERA
Uses a handle based on ergonomic design which is easy to carry, rotate and transmits torque reliably.
Standard Price: MYR 774.43 Days to Ship: 5 Day(s) or more -
WERA
Uses a handle based on ergonomic design which is easy to carry, rotate and transmits torque reliably.
Standard Price: MYR 386.90 Days to Ship: 5 Day(s) or more -
LED Electrical Screwdriver D-745
HOZAN
An LED type inspection screwdriver with high visibility.
[Features]
· Batteries can be changed.
· Applicable ranges: 100 to 240 VAC, tip size of 2.5 x 0.6 mm, total length of 139 mm, shaft length of 17 mm, shaft diameter of 2.5 mm.
· Handle diameter 16 mm, weight 23 g.
· Be sure to check the light before use.
· Be careful of short circuit and electric shock.
[Applications]
· Used for determining AC polarity and checking electrical conductance.
· Can be used within the applicable range.Standard Price: MYR 42.66 Days to Ship: 5 Day(s) or more -
Standard Price: MYR 9.83 Days to Ship: 8 Day(s) -
ESD (Electrostatic Discharge) Slotted Screwdriver PB 8100 ESD
PB SWISS TOOLS
[Features]
· ESD (electrostatic discharge) straight slot screwdriver
· Parallel blade tip: transmits ideal force
· No cam-out effect
· SwissGrip handle
· ESD (electrostatic discharge)
· Surface resistance: 1 MΩ to 1 GΩStandard Price: MYR 61.21 Days to Ship: 9 Day(s) or more -
Screwdriver For Voltage Testing
PB SWISS TOOLS
Electroscopic screwdriver 110-250V, DIN VDE0680-6 compliant.
Standard Price: MYR 98.08 Days to Ship: 25 Day(s) or more -
SwissGrip Precision Set Screwdriver
PB SWISS TOOLS
High-precision screwdriver
[Features]
· Slip-resistant when gripped with wet hands. Resistant to oil/gasoline.
· Wipes clean when dirtyStandard Price: MYR 63.74- Days to Ship: 9 Day(s) or more -
SwissGrip ESD Precision Set Screwdriver
PB SWISS TOOLS
High-precision ESD screwdriver
[Features]
· Slip-resistant when gripped with wet hands. Wipes clean when dirty.
[Applications]
· Electrostatic discharge (ESD): Appropriate for general workplaces where there is a possibility of electrostatic charge or discharge causing danger or damageStandard Price: MYR 77.92 Days to Ship: 8 Day(s)
| Brand |
|---|
| Product Series |
| Days to Ship |
| Tip standards |
| Tip size / Phillips (+) |
| Tip size / flathead (-) blade width (mm) B1 |
| Shaft length L (mm) |
| Single Product/Set Classification |
| Shaft type |
| Magnet |
| Shaft through |
| Bolster |
| Grip Type |
| Tip size / flathead (-) blade thickness (mm) B2 |
| (Box/Hex/Ball-Point) Width Across Flats (mm) |
| (Box/Hex/Ball-Point) Width Across Flats (inch) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | HOZAN | VESSEL | HOZAN | HOZAN | ANEX | SUNFLAG | PB SWISS TOOLS | KTC(KYOTO TOOL) | ENGINEER | TRUSCO NAKAYAMA | HOZAN | HOZAN | HOZAN | VESSEL | ANEX | HIRAI KOGU | WERA | WERA | PB SWISS TOOLS | PB SWISS TOOLS | PB SWISS TOOLS | VESSEL | VESSEL | ENGINEER | ENGINEER | ENGINEER | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | WERA | WERA | HOZAN | ANEX | PB SWISS TOOLS | PB SWISS TOOLS | PB SWISS TOOLS | PB SWISS TOOLS |
| Product Series | Ceramic Adjustment Screwdriver Set D-17 【3 Pieces Per Package】 | ESD (Electrostatic Discharge) Slotted Screwdriver PB 8100 ESD | ||||||||||||||||||||||||||||||||||
| Days to Ship | 9 Day(s) | 9 Day(s) | 1 Day(s) | 1 Day(s) | 8 Day(s) | 8 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 9 Day(s) | 8 Day(s) | 1 Day(s) | 9 Day(s) | 9 Day(s) | 8 Day(s) or more | 9 Day(s) | 8 Day(s) | 9 Day(s) | 9 Day(s) | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 8 Day(s) | 9 Day(s) or more | 25 Day(s) or more | 9 Day(s) or more | 8 Day(s) |
| Tip standards | Phillips (+)/Flathead(-) | Phillips (+)/Flathead(-) | Phillips (+)/Flathead(-) | Flathead (-) | Flathead (-) | Other | Flathead (-) | Flathead (-) | Flathead (-) | Phillips (+)/Flathead(-) | Flathead (-) | Flathead (-) | Phillips (+)/Flathead(-) | Flathead (-) | Flathead (-) | Phillips (+)/Flathead(-) | Flathead (-) | Flathead (-) | Flathead (-) | Flathead (-) | Flathead (-) | Flathead (-) | Phillips (+)/Flathead(-) | Flathead (-) | Flathead (-) | Phillips (+)/Flathead(-) | Phillips (+)/Flathead(-) | Phillips (+)/Flathead(-) | Combination | Phillips (+)/Flathead(-) | Flathead (-) | Flathead (-) | Flathead (-) | Flathead (-) | Flathead (-) | Flathead (-) |
| Tip size / Phillips (+) | No.00 | No.00 | No.00 / No.1 / No.2 | - | - | - | - | - | - | No.0 / No.1 / No.2 | - | - | No.0 | - | - | No.00 / No.0 | - | - | - | - | - | - | No.0 / No.1 / No.2 | - | - | Other | No.0 / No.1 / No.2 | No.0 / No.1 / No.2 | No.00 / No.0 | No.00 / No.0 | - | - | - | - | - | - |
| Tip size / flathead (-) blade width (mm) B1 | 2.5 | 2.5 ～ 3 | 2.5 ～ 5.5 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 1.3 | 2.5 ～ 6 | 1.3 | 0.9 ～ 2.6 | 1.3 ～ 1.8 | 2.5 | 2.5 | 2.5 ～ 4 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 1.3 | 2.5 ～ 6 | 1.3 ～ 2.5 | 1.3 ～ 2.5 | 0.8 ～ 2.5 | 1.8 ～ 6 | 1.8 ～ 6 | 1.5 ～ 3 | 1.2 ～ 3 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 |
| Shaft length L (mm) | 57 | 75 ～ 100 | 57 | 75 ～ 100 | 75 | 25 | 80 | 75 | 18 | - | 110 | - | 110 | 50 | 50 | - | 80 | 80 | 80 | 80 | 50 | 30 | - | - | 17 ～ 20 | - | - | - | - | - | 17 | 100 | 80 | 50 | - | - |
| Single Product/Set Classification | Single Item | Set Product | Set Product | Single Item | Single Item | Set Product | Single Item | Single Item | Single Item | Set Product | Single Item | Set Product | Set Product | Single Item | Single Item | Set Product | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Set Product | Single Item | Single Item | Set Product | Set Product | Set Product | Set Product | Set Product | Single Item | Single Item | Single Item | Single Item | - | - |
| Shaft type | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | - | - |
| Magnet | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | Available | NA | NA | NA | NA | NA | NA | NA | NA | Available | NA | NA | NA | NA | NA | NA | NA | NA | NA | - | - | - | - |
| Shaft through | - | NA | - | NA | NA | NA | NA | NA | NA | NA | NA | - | NA | NA | NA | - | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | - | - | - |
| Bolster | - | NA | - | NA | NA | NA | NA | NA | NA | NA | NA | - | NA | NA | NA | - | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | - | - | - |
| Grip Type | Rubber | Resin | Rubber | Rubber | Rubber | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Rubber | Rubber | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Rubber | Rubber | Resin | Resin | - | - | - | - |
| Tip size / flathead (-) blade thickness (mm) B2 | 0.4 | - | 0.4 ～ 0.9 | 0.35 | - | - | 0.4 | 0.4 | 0.4 ～ 0.7 | - | 0.4 | 0.4 | 0.4 | 0.35 | - | - | - | - | 0.4 | 0.4 | 0.5 | 0.4 | - | 0.4 ～ 0.7 | 0.4 ～ 0.7 | 0.35 ～ 0.7 | - | - | - | - | 0.6 | 0.4 | 0.4 | 0.5 | 0.4 | 0.4 |
| (Box/Hex/Ball-Point) Width Across Flats (mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.9 ～ 2 | - | - | - | - | - | - | - |
| (Box/Hex/Ball-Point) Width Across Flats (inch) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Tip standards
- Phillips (+)
- Flathead (-)
- Phillips (+)/Flathead(-)
- Torx
- Box
- Hexagon
- Ballpoint
- Combination
- Other
-
Tip size / Phillips (+)
- No.000
- No.00
- No.0
- No.1
- No.2
- No.3
- No.4
- Other
-
Tip size / flathead (-) blade width (mm) B1
-
Shaft length L (mm)
- 5
- 9
- 10
- 11
- 13
- 14
- 15
- 16
- 17
- 18
- 18～90
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 28
- 30
- 35
- 36
- 38
- 40
- 41
- 45
- 50
- 51
- 57
- 60
- 60, 75, 80
- 60, 80, 100
- 65
- 66
- 67
- 70
- 75
- 75 (PGMD-075), 100 (PGMD-100), 25 (PGSD-M2), 75 (PGPD-001), 100 (PGPD-002), 150 (PGPD-003), 25 (PGSD-P2)
- 75 (PGMD-075), 100 (PGMD-100), 150 (PGMD-150), 25 (PGSD-M2), 75 (PGPD-001), 100 (PGPD-002), 150 (PGPD-003), 25 (PGSD-P2)
- 75 (PGMD-075), 100 (PGMD-100), 150 (PGMD-150), 75 (PGPD-001), 100 (PGPD-002), 150 (PGPD-003)
- 75~150
- 76
- 80
- 80, 100, 125
- 82
- 85
- 89
- 90
- 95
- 100
- 102
- 103
- 105
- 107
- 110
- 115
- 120
- 122
- 125
- 128
- 130
- 135
- 138
- 140
- 145
- 150
- 152
- 153
- 160
- 165
- 167
- 170
- 175
- 180
- 190
- 195
- 200
- 220
- 225
- 230
- 240
- 250
- 267
- 275
- 288
- 300
- 320
- 390
- 400
- 450
- 500
- 600
-
Single Product/Set Classification
- Single Item
- Set Product
-
Shaft type
-
Magnet
- Available
- NA
-
Shaft through
- Available
- NA
-
Bolster
- Included
- NA
-
Grip Type
- Resin
- Wooden handle
- Rubber
- Stainless Steel
-
Tip size / flathead (-) blade thickness (mm) B2
-
(Box/Hex/Ball-Point) Width Across Flats (mm)
-
(Box/Hex/Ball-Point) Width Across Flats (inch)
Narrow search by specifying Manufacturer
-
- PB SWISS TOOLS (8)
- HOZAN (7)
- ENGINEER (4)
- VESSEL (4)
- WERA (4)
- ANEX (3)
- TRUSCO NAKAYAMA (3)
- HIRAI KOGU (1)
- KTC(KYOTO TOOL) (1)
- SUNFLAG (1)
- ARC (0)
- HANDIWORK (0)
- MITOLOY (0)
- E VALUE (0)
- FUJIYA (0)
- HIOS (0)
- SMATO (0)
- SIGNET (0)
- SUEKAGE TOOL (0)
- TRAD (0)
- TOP (0)
- AS ONE (0)
- ESCO (0)
- BONDHUS (0)
- SK 11 (0)
- WIHA (0)
- HAZET (0)
- KO-KEN TOOL (0)
- EIGHT TOOL (0)
- WILLIAMS (0)
- TONE (0)
CAD
-
- 2D
- 3D
Related Categories to Screwdrivers
-
- Wrenches / Offset Wrenches / Ratchet Wrenches
- Hex Wrenches
- Monkey Wrenches
- Torx Wrenches
- Socket Wrenches
- Torque Wrenches
- Screwdrivers
- Torque Screwdrivers
- Pliers/Nippers/Pincers
- Hammers
- Tool Sets / Tool Boxes
- Cutter Knives
- Chisels
- Screwdriver Bits
- Socket Bits
- Crowbars
- Pullers
- Tweezers
- Engravers/Punches
- Vehicle Maintenance Tools
- Tools for Water Supply Faucets and Air-Conditioning Piping
- Cutting Tools
- Insulation Tools
- Sheet Metal Tools
- Explosion-Proof Hand Tools
- Caulking Tools
- Tools Used at Electric Facilities
- Crowbars
-
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy