(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Screwdrivers（Page4）
| Days to Ship |
|
|---|
-
ENGINEER
[Features]
· Ratchet mechanism and quick-turning mechanism improve work efficiency.
· Highly effective for work in tight spaces where a normal screwdriver doesn't fit.Standard Price: MYR 69.84 Days to Ship: 9 Day(s) -
Ceramic Adjustment Screwdriver DA-48 – 52
ENGINEER
Multifunction ceramic adjustment driver that enables 4 types of trimmer adjustment with the 1 tool.
[Features]
· Uses tough zirconia-based fine ceramic bit.
· For high frequency area adjustment with complete non-inductive properties.
· Also ideal as a short-circuit prevention screwdriver for board protection.
· There are 2 bits at both ends to enable 4 kinds of adjustment. (Tip: +/- Bit, Shaft: Hex)
· Pencil-type portable design with caps for protecting tip.
[Applications]
· For audio equipment such as tuners and amplifiers, TVs, video cameras, and radio related equipment.
· For work related to wireless devices, computers and communications.Standard Price: MYR 140.81- Days to Ship: 8 Day(s) or more -
Ceramic Adjustment Screwdriver, Detachable DA-72 – 79
ENGINEER
Thin-shaft ceramic adjustment screwdriver that's ideal for trimmer adjustment of deep areas.
[Features]
· High-strength, long lasting, completely non-inductive high frequency adjustment driver made of new zirconia-based fine ceramics.
· It can be adjusted at 2 locations, the tip portion (+/- bit), and the shaft portion (hexagonal type).
· Since the shaft portion and the handle can be detached, it is also possible to use it mounted on machines, etc.
[Applications]
· This fine shaft type is ideal for adjustment of chassis parts and other deep areas.Standard Price: MYR 85.03- Days to Ship: 9 Day(s) -
Ceramic Adjustment Screwdriver Set DK-90
ENGINEER
Multifunction ceramic adjustment driver that enables 4 types of trimmer adjustment with the 1 tool.
[Features]
· Uses tough zirconia-based fine ceramic bit.
· For high frequency area adjustment with complete non-inductive properties. Also ideal as a short-circuit prevention screwdriver for board protection.
· There are 2 bits at both ends to enable 4 kinds of adjustment (tip: Phillips, flathead bits / shank: hex).
· Pencil-type portable design with caps for protecting tip.
· 4 piece set of DA-48 and 50 to 52.
[Applications]
· For audio equipment such as tuners and amplifiers.
· For TV, video camera, radio-related, wireless equipment, computer-related facilities, communications equipment, etc.Standard Price: MYR 461.49 Days to Ship: 8 Day(s) -
Twin Wrench Driver Set (Special Screw Compatible Type)
ENGINEER
Twin-wrench screwdriver set that's effective in narrow spaces and by walls.
[Features]
· Twin wrench screwdriver with a set of 8 types of bits for special screws and Phillips and flathead bits.
· This cushioned handle fits perfectly in the hand, and does not slip.
· Substitute bit holder is a burette type that is convenient for carrying.
· +/- bit with a magnetic tip.Standard Price: MYR 165.08 Days to Ship: 9 Day(s) -
Replacement Screwdriver Set DK-50
ENGINEER
+/- 2-WAY bit for 2-in-1 interchangeable screwdriver set.
[Features]
· +/- 2-WAY 2-in-1 bit.
· 3-piece interchangeable screwdriver set.
[Applications]
· For tightening and removing various screws.Standard Price: MYR 69.30 Days to Ship: 9 Day(s) -
TONE
Standard type screwdriver with a wooden handle.
[Features]
· Standard type screwdriver with a wooden handle with a sense of warmth.
· Through screwdriver.
[Applications]
· Ideal for a wide range of maintenance work, such as maintenance of automobiles, motorcycles, bicycles, etc. and maintenance of industrial equipment.Standard Price: MYR 40.38 Days to Ship: 9 Day(s) -
Replacement Stubby Screwdriver Set CDS2
TONE
Screwdriver with a flathead and Phillips head at both ends.
[Features]
· The total length is short, making it ideal for working in narrow places.
· Total length: 90 mm.
· Grip type: Resin.
[Applications]
· Assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.Standard Price: MYR 38.70 Days to Ship: 9 Day(s) -
Replacement Screwdriver Set CD12
TONE
Screwdriver with a flathead and Phillips head at both ends.
[Features]
· The total length is short, making it ideal for working in narrow places.
· Total length: 195 mm.
· Grip type: Resin.
[Applications]
· Assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.Standard Price: MYR 55.86 Days to Ship: 9 Day(s) -
TONE
An ideal screwdriver for working in places that conventional screwdrivers cannot reach.
[Features]
· Long shaft screwdriver with a total length of 395 mm.
· Round shaft type with 267 mm shaft length. With magnet.
· Flathead tip -0.8 x 6.0 mm.
· Phillips tip +No.2 mm.
[Applications]
· Assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.Standard Price: MYR 69.48 Days to Ship: 10 Day(s) -
Long Shaft Screwdriver Set LD2
TONE
2-piece long shaft screwdriver set with an overall length of 395 mm.
[Features]
· For work which can't be reached using a conventional driver.
· Length: 395 mm, shaft length: 267 mm. Round shaft type with magnet.
· Flathead tip -0.8 x 6.0.
· Phillips tip +No.2.
[Applications]
· Assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.Standard Price: MYR 115.69 Days to Ship: 9 Day(s) -
TONE
A set of 2 types of handles, 3 sized replacement bit holders and 20 frequently used bits.
[Features]
· Left and right switching can be done by simply turning the change knob.
· The grip shape can be changed between 2 types according to the work.
· The bit holder has a one-touch bit release mechanism.
· Grip component of the screwdriver comes with a magazine that can store 6 bits.
[Applications]
· For maintenance of automobiles, motorcycles, bicycles, etc. and maintenance of industrial equipment, etc.
· Ideal for a wide range of maintenance work.Standard Price: MYR 559.52 Days to Ship: 9 Day(s) -
TONE
Full set containing screwdriver type handles and tip replacement bits.
[Features]
· Screwdriver-type handles with built-in ratchet mechanism are available in 3 types.
· There are 32 types of replaceable tip bits.
· A full set of screwdrivers that also accommodates 3 types of extension bit holders.
[Applications]
· A complete set ideal for tightening/loosening flathead / Phillips head screws and hexagon socket bolts.
· Ideal for a wide range of maintenance work, such as maintenance of automobiles, motorcycles, bicycles, etc. and maintenance of industrial equipment.Standard Price: MYR 661.51 Days to Ship: 9 Day(s) -
HOZAN
A micro-sized screwdriver that's turned with fingertips, convenient for carrying, and can be stored anywhere.
[Features]
· Size that is easy to use even in narrow locations. For small screws that do not require force.
· The handle is designed at a length suitable for fingertip turning; while unsuitable for firmly tightened screws, it is effective for rapid turning.
· The tip size is No. 00, making it convenient for fine-tuning trims, trimmers, semi-fixed volume knobs, etc.
· The size and price allow placement where adjustment is necessary.
[Applications]
· Ideal for screws that are difficult to use with general drivers such as those for cameras and optical devices.
· For easily carrying glasses screws in the corners of pen cases, for regulation and for precision machines.
· Since its thin handle does not allow application of torque, it can be used securely for machine screws on instruments and fixtures which can break when too much strength is applied.Standard Price: MYR 9.83 Days to Ship: 8 Day(s) -
HOZAN
Screwdriver to be used for screws in narrow spaces.
[Features]
· Convenient for screws that are located in narrow places where ordinary screwdrivers cannot enter.
· Compact design that allows work in narrow locations.
· Handle shape that transfers force.
· A spherical handle allows the screwdriver to be easily pressed against the screw by grasping the handle in the palm.
[Applications]
· The short overall length of 83 mm allows easy handling in narrow spaces. Exhibits great effect in narrow spaces.Standard Price: MYR 32.86 Days to Ship: 9 Day(s) -
Screwdriver with Anti-Drop Ring
ANEX
The cord does not tangle, even when the handle is turned by the rotating cap. With ring for attaching fall prevention cord. Ideal for work in high places.
Standard Price: MYR 45.54- Days to Ship: 8 Day(s) or more -
Replacement Screwdriver (Incorporating Magnet)
ANEX
Comes with a bolster which can be tightened or loosened with a wrench. An electric screwdriver bit (subtense 6.35 mm hex shaft) can be used. The Phillips part of the bit has double spikes (AAC) securely holding screws. The slotted part of the bit has a special shape that can be inserted into the removal hole of the terminal.
Standard Price: MYR 72.53 Days to Ship: 8 Day(s) -
Compact ratchet 52 (straight type) set
ANEX
[Features]
·It is ultra-thin with a head width of 20 mm.
·For screwdrivers in narrow spaces.
·Smooth work with 52 fine gears.
·A ratchet mechanism that allows you to turn the screw by repeatedly turning left and right without changing the handle.
·Uses ultra-short bits.Standard Price: MYR 333.19 Days to Ship: 9 Day(s) -
HIRAI KOGU
A regular size ratchet type bit replacement type screwdriver with a joint attached to D-88. Includes a 6.35 mm hexagonal 30 mm bit, and can be used as a stubby type by removing the joint. 42-tooth gears provide smooth operation. Lights up in dark areas to prevent loss.
Standard Price: MYR 123.50 Days to Ship: 8 Day(s) -
Standard Price: MYR 44.07 Days to Ship: 9 Day(s) -
Electrician's Screwdriver (with Magnet) - Shaft Length 75mm
TRUSCO NAKAYAMA
The bottom of the grip is a ball type, making it easier to turn the screw.
Standard Price: MYR 29.10- Days to Ship: 9 Day(s) -
Anti-falling Electric Work Screwdriver (Magnetic Tip)
TRUSCO NAKAYAMA
360-degree rotation function that is easy to turn but unlikely to get tangled prevents drivers from falling off while working in high places.
Standard Price: MYR 46.01- Days to Ship: 9 Day(s) -
TRUSCO NAKAYAMA
A ratchet mechanism is included, which turns the screw just by a repetitive motion of the wrist, without the need to re-grip the handle.
Standard Price: MYR 99.15 Days to Ship: 9 Day(s) -
Plastic handle screwdriver (with magnet)
TRUSCO NAKAYAMA
The bottom of the grip is a ball type, making it easier to turn the screw.
Standard Price: MYR 26.42 Days to Ship: 9 Day(s) -
Standard Price: MYR 27.29 Days to Ship: 9 Day(s) -
Wooden handle through screwdriver (with magnet)
TRUSCO NAKAYAMA
Special rust-resistant plating is applied.
Standard Price: MYR 23.84 Days to Ship: 9 Day(s) or more -
TRUSCO NAKAYAMA
This is a universal type switchable screwdriver that can use bits for electric screwdrivers. The cushion handle resists slipping, even when work gloves are worn.
Standard Price: MYR 45.38- Days to Ship: 9 Day(s) -
TRUSCO NAKAYAMA
[Features]
· Replacement bit for multi-drivers made by TRUSCO NAKAYAMA.Standard Price: MYR 25.45 Days to Ship: 9 Day(s) -
WERA
The lasered tip provides exceptional bite into screws. Special grip design provides an easy grip and comfortable fit. White carton specifications.
Standard Price: MYR 698.35 Days to Ship: 8 Day(s) -
Micro Screwdriver Set - 12 pcs
WERA
Uses a handle based on ergonomic design which is easy to carry, rotate and transmits torque reliably.
Standard Price: MYR 774.43 Days to Ship: 5 Day(s) or more -
WERA
Uses a handle based on ergonomic design which is easy to carry, rotate and transmits torque reliably.
Standard Price: MYR 386.90 Days to Ship: 5 Day(s) or more -
Standard Price: MYR 82.18- Days to Ship: 8 Day(s) -
Stubby Ratchet Screwdriver 52380
SIGNET
The number of gear teeth is 60. Rotates smoothly, with excellent workability. It is a short ratchet driver that's ideal for narrow spaces. Uses anti-slip elastomer resin with which force can be easily applied.
Standard Price: MYR 95.37 Days to Ship: 4 Day(s) or more -
LED Electrical Screwdriver D-745
HOZAN
An LED type inspection screwdriver with high visibility.
[Features]
· Batteries can be changed.
· Applicable ranges: 100 to 240 VAC, tip size of 2.5 x 0.6 mm, total length of 139 mm, shaft length of 17 mm, shaft diameter of 2.5 mm.
· Handle diameter 16 mm, weight 23 g.
· Be sure to check the light before use.
· Be careful of short circuit and electric shock.
[Applications]
· Used for determining AC polarity and checking electrical conductance.
· Can be used within the applicable range.Standard Price: MYR 42.66 Days to Ship: 5 Day(s) or more -
Screwdriver Set for Voltage Detection Replacement Set of 6 (for Low Voltage)
VESSEL
For voltage testing and maintenance of electrical products and distribution boards in general households or industry.
Standard Price: MYR 74.89 Days to Ship: 5 Day(s) or more -
TRUSCO NAKAYAMA
[Features]
· Ideal for attaching and detaching fine screws for eyeglasses.Standard Price: MYR 35.99 Days to Ship: 9 Day(s) -
TRUSCO NAKAYAMA
[Features]
· A bit with shaft diameter of 6.35 mm.
· Can also be used on ratchet screwdrivers.Standard Price: MYR 15.71 Days to Ship: 9 Day(s) -
Standard Price: MYR 9.83 Days to Ship: 8 Day(s) -
Electrician's 2-way Screwdriver
SMATO
[Features]
· Screwdriver with both Phillips and flathead bits attachedStandard Price: MYR 109.19 Days to Ship: 4 Day(s) or more -
Screwdriver for electrical work with fall prevention (with magnet)
TRUSCO NAKAYAMA
[Features]
· Easy to turn and hard to tarnish, with 360 degree rotation function, driver is protected from falling at high altitude work.Standard Price: MYR 46.01- Days to Ship: 9 Day(s) -
Standard Price: MYR 67.89 Days to Ship: 8 Day(s) -
ENGINEER
· The tip is an ultrathin 22 mm so it can also support narrow gaps.
· This is a set of Phillips and flathead bits that are frequently used with offset ratchets.
· Includes Rapid Turning MechanismStandard Price: MYR 83.19 Days to Ship: 9 Day(s) -
Plastic Handle Precision Screwdriver
TRUSCO NAKAYAMA
[Features]
· A precision screwdriver with strengthened tip, using nickel-chrome-molybdenum vanadium steel.
· Lightweight and easy to use as it has a plastic handle.
· Comes with rotating cap.Standard Price: MYR 14.82 Days to Ship: 9 Day(s) -
Precision Driver, Precision Screwdriver, TSDA
TRUSCO NAKAYAMA
[Features]
· It is a perfect screwdriver for attaching and detaching fine screws.
· Convenient for tasks such as the assembly and repair of watches, radios, glasses, precision machines, plastic models, and more.Standard Price: MYR 14.10 Days to Ship: 9 Day(s) -
Straight-Slot Through Type Screwdriver With Wooden Handle
KTC(KYOTO TOOL)
[Features]
· Traditional screwdriver that makes use of the warm texture of wood.Standard Price: MYR 78.71 Days to Ship: 9 Day(s)
| Brand |
|---|
| Product Series |
| Days to Ship |
| Tip standards |
| Tip size / Phillips (+) |
| Tip size / flathead (-) blade width (mm) B1 |
| Shaft length L (mm) |
| Single Product/Set Classification |
| Shaft type |
| Magnet |
| Shaft through |
| Bolster |
| Grip Type |
| Tip size / flathead (-) blade thickness (mm) B2 |
| (Box/Hex/Ball-Point) Width Across Flats (mm) |
| (Box/Hex/Ball-Point) Width Across Flats (inch) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | TONE | TONE | TONE | TONE | TONE | TONE | TONE | HOZAN | HOZAN | ANEX | ANEX | ANEX | HIRAI KOGU | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | WERA | WERA | WERA | WERA | SIGNET | HOZAN | VESSEL | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | ANEX | SMATO | TRUSCO NAKAYAMA | KO-KEN TOOL | ENGINEER | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | KTC(KYOTO TOOL) |
| Product Series | Screwdriver Set for Voltage Detection Replacement Set of 6 (for Low Voltage) | Screwdriver for electrical work with fall prevention (with magnet) | |||||||||||||||||||||||||||||||||||||||||||
| Days to Ship | 9 Day(s) | 8 Day(s) or more | 9 Day(s) | 8 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 10 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 8 Day(s) | 9 Day(s) | 8 Day(s) or more | 8 Day(s) | 9 Day(s) | 8 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) or more | 9 Day(s) | 9 Day(s) | 8 Day(s) | 5 Day(s) or more | 5 Day(s) or more | 8 Day(s) | 4 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 9 Day(s) | 9 Day(s) | 8 Day(s) | 4 Day(s) or more | 9 Day(s) | 8 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) |
| Tip standards | Phillips (+)/Flathead(-) | Flathead (-) | Flathead (-) | Phillips (+)/Flathead(-) | Combination | Phillips (+)/Flathead(-) | Flathead (-) | Phillips (+)/Flathead(-) | Phillips (+)/Flathead(-) | Flathead (-) | Phillips (+)/Flathead(-) | Combination | Combination | Flathead (-) | Flathead (-) | Flathead (-) | Phillips (+)/Flathead(-) | Combination | Phillips (+)/Flathead(-) | Phillips (+)/Flathead(-) | Flathead (-) | Flathead (-) | Phillips (+)/Flathead(-) | Flathead (-) | Flathead (-) | Flathead (-) | Phillips (+)/Flathead(-) | Phillips (+)/Flathead(-) | Combination | Combination | Phillips (+)/Flathead(-) | Flathead (-) / Phillips (+)/Flathead(-) | Phillips (+)/Flathead(-) | Flathead (-) | Combination | Phillips (+)/Flathead(-) | Phillips (+)/Flathead(-) | Flathead (-) | Phillips (+)/Flathead(-) | Flathead (-) | Phillips (+)/Flathead(-) | Combination | Flathead (-) | Flathead (-) | Flathead (-) |
| Tip size / Phillips (+) | No.2 | - | - | Other | No.1 / No.2 | No.00 / No.1 / No.2 | - | No.2 | No.1 / No.2 | - | No.2 | No.1 / No.2 / No.3 | No.1 / No.2 / No.3 | - | - | - | No.2 | No.1 / No.2 / No.3 | No.1 / No.2 | No.0 / No.1 / No.2 | - | - | No.0 / No.1 / No.2 | - | - | - | No.1 / No.2 / No.3 | No.1 / No.2 / No.3 | No.1 / No.2 / No.3 | No.00 / No.0 | No.00 / No.0 | No.2 | No.2 | - | No.1 / No.2 | No.00 | No.2 | - | No.2 | - | No.2 | No.1 / No.2 / No.3 | - | - | - |
| Tip size / flathead (-) blade width (mm) B1 | 6 | 0.9 ～ 2.5 | 1.8 ～ 2.5 | 0.8 ～ 2.5 | 4.5 ～ 6 | 2.6 ～ 6 | 6 | 6 | 4.5 ～ 6 | 6 | 6 | 5.5 ～ 8 | 5.5 ～ 8 | 1.8 | 6 | 6 | 6 | 6 | 6 | 1.8 ～ 6 | 6 | 6 | 1.8 ～ 6 | 6 | 6 | 6 | 6 | 6 | 6 ～ 8 | 1.5 ～ 3 | 1.2 ～ 3 | 5 ～ 6 | 6 | 2.5 | 4 ～ 6 | 1.8 | 6 | 2.5 | 6 | 6 | 6 | 6 | 1.8 | 1.8 | 6 |
| Shaft length L (mm) | - | - | 17 | - | - | 67 ～ 89 | 100 | - | - | 267 | 267 | - | - | 23 | 35 | 100 ～ 150 | 135 | - | - | - | 100 ～ 200 | 100 ～ 150 | - | 100 | 100 | 100 | - | - | - | - | - | - | - | 17 | - | 11 | - | 100 | 75~150 | 100 ～ 200 | 100 | - | 21 | 24 | 100 |
| Single Product/Set Classification | Single Item | Single Item | Single Item | Set Product | Set Product | Set Product | Single Item | Set Product | Set Product | Single Item | Set Product | Set Product | Set Product | Single Item | Single Item | Single Item | Set Product | Set Product | Set Product | Set Product | Single Item | Single Item | Set Product | Single Item | Single Item | Single Item | Set Product | Single Item | Set Product | Set Product | Set Product | Single Item | Single Item | Single Item | Set Product | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Set Product | Single Item | Single Item | Single Item |
| Shaft type | - | Round | Round | Round | - | Round | Round | Square | Square | Round | Round | Square | Square | Round | Round | Round | Round | - | Square | Round | Round | Round | Round | Round | Round | Round | Square | Square | Round | Round | Round | Round | - | Round | - | Round | - | Round | Round | Round | Square | - | - | - | Round |
| Magnet | Available | NA | NA | NA | Available | NA | NA | NA | NA | Available | Available | Available | Available | NA | NA | NA | Available | NA | Available | NA | Available | Available | NA | Available | Available | Available | NA | NA | NA | NA | NA | NA | NA | NA | - | NA | NA | NA | NA | Available | NA | - | - | - | NA |
| Shaft through | - | NA | NA | NA | - | - | Available | - | - | NA | NA | - | - | NA | NA | NA | - | - | - | NA | NA | NA | NA | NA | NA | Available | - | - | NA | NA | NA | - | - | NA | - | - | - | NA | - | NA | NA | - | - | - | Available |
| Bolster | - | NA | NA | NA | - | - | NA | - | - | NA | NA | - | - | NA | NA | NA | Included | - | - | NA | NA | NA | NA | NA | NA | NA | - | - | NA | NA | NA | - | - | NA | - | - | - | NA | - | NA | NA | - | - | - | NA |
| Grip Type | Stainless Steel | Resin | Resin | Resin | Rubber | Resin | Wooden handle | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Rubber | Rubber | Resin | Resin | Resin | Resin | Rubber | Resin | Resin | Resin | Wooden handle | Wooden handle | Rubber | - | Rubber | Rubber | Rubber | - | Resin | Resin | Resin | - | - | Resin | Resin | Resin | Rubber | - | - | - | Wooden handle |
| Tip size / flathead (-) blade thickness (mm) B2 | - | 0.4 ～ 0.7 | 0.4 ～ 0.7 | 0.35 ～ 0.7 | - | - | 0.9 | 0.8 | 0.6 ～ 0.8 | 0.8 | 0.8 | - | - | 0.3 | 0.9 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.6 | - | - | - | 0.4 | - | - | - | - | - | 0.31 | 0.9 |
| (Box/Hex/Ball-Point) Width Across Flats (mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2.5 ～ 6 | - | - | - | - | - | - | - | - | - | - | 8 ～ 10 | 0.9 ～ 2 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| (Box/Hex/Ball-Point) Width Across Flats (inch) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Tip standards
- Phillips (+)
- Flathead (-)
- Phillips (+)/Flathead(-)
- Torx
- Box
- Hexagon
- Ballpoint
- Combination
- Other
-
Tip size / Phillips (+)
- No.000
- No.00
- No.0
- No.1
- No.2
- No.3
- No.4
- Other
-
Tip size / flathead (-) blade width (mm) B1
-
Shaft length L (mm)
- 5
- 9
- 10
- 11
- 13
- 14
- 15
- 16
- 17
- 18
- 18～90
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 28
- 30
- 35
- 36
- 38
- 40
- 41
- 45
- 50
- 51
- 57
- 60
- 60, 75, 80
- 60, 80, 100
- 65
- 66
- 67
- 70
- 75
- 75 (PGMD-075), 100 (PGMD-100), 25 (PGSD-M2), 75 (PGPD-001), 100 (PGPD-002), 150 (PGPD-003), 25 (PGSD-P2)
- 75 (PGMD-075), 100 (PGMD-100), 150 (PGMD-150), 25 (PGSD-M2), 75 (PGPD-001), 100 (PGPD-002), 150 (PGPD-003), 25 (PGSD-P2)
- 75 (PGMD-075), 100 (PGMD-100), 150 (PGMD-150), 75 (PGPD-001), 100 (PGPD-002), 150 (PGPD-003)
- 75~150
- 76
- 80
- 80, 100, 125
- 82
- 85
- 89
- 90
- 95
- 100
- 102
- 103
- 105
- 107
- 110
- 115
- 120
- 122
- 125
- 128
- 130
- 135
- 138
- 140
- 145
- 150
- 152
- 153
- 160
- 165
- 167
- 170
- 175
- 180
- 190
- 195
- 200
- 220
- 225
- 230
- 240
- 250
- 267
- 275
- 288
- 300
- 320
- 390
- 400
- 450
- 500
- 600
-
Single Product/Set Classification
- Single Item
- Set Product
-
Shaft type
-
Magnet
- Available
- NA
-
Shaft through
- Available
- NA
-
Bolster
- Included
- NA
-
Grip Type
- Resin
- Wooden handle
- Rubber
- Stainless Steel
-
Tip size / flathead (-) blade thickness (mm) B2
-
(Box/Hex/Ball-Point) Width Across Flats (mm)
-
(Box/Hex/Ball-Point) Width Across Flats (inch)
Narrow search by specifying Manufacturer
-
- VESSEL (48)
- ANEX (27)
- TRUSCO NAKAYAMA (19)
- ENGINEER (15)
- KTC(KYOTO TOOL) (14)
- HOZAN (12)
- TONE (10)
- PB SWISS TOOLS (9)
- HIRAI KOGU (7)
- WERA (7)
- SUNFLAG (6)
- SK 11 (4)
- E VALUE (2)
- TRAD (2)
- BONDHUS (1)
- FUJIYA (1)
- KO-KEN TOOL (1)
- SMATO (1)
- SIGNET (1)
- SUEKAGE TOOL (1)
- ARC (0)
- HANDIWORK (0)
- MITOLOY (0)
- HIOS (0)
- TOP (0)
- AS ONE (0)
- ESCO (0)
- WIHA (0)
- HAZET (0)
- EIGHT TOOL (0)
- WILLIAMS (0)
CAD
-
- 2D
- 3D
Related Categories to Screwdrivers
-
- Wrenches / Offset Wrenches / Ratchet Wrenches
- Hex Wrenches
- Monkey Wrenches
- Torx Wrenches
- Socket Wrenches
- Torque Wrenches
- Screwdrivers
- Torque Screwdrivers
- Pliers/Nippers/Pincers
- Hammers
- Tool Sets / Tool Boxes
- Cutter Knives
- Chisels
- Screwdriver Bits
- Socket Bits
- Crowbars
- Pullers
- Tweezers
- Engravers/Punches
- Vehicle Maintenance Tools
- Tools for Water Supply Faucets and Air-Conditioning Piping
- Cutting Tools
- Insulation Tools
- Sheet Metal Tools
- Explosion-Proof Hand Tools
- Caulking Tools
- Tools Used at Electric Facilities
- Crowbars
-
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy