(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Screwdrivers（Page3）
| Days to Ship |
|
|---|
-
Electrician's Screwdriver (with Magnet) - Shaft Length 75mm
TRUSCO NAKAYAMA
The bottom of the grip is a ball type, making it easier to turn the screw.
Standard Price: MYR 23.71- Days to Ship: 9 Day(s) -
TRUSCO NAKAYAMA
A ratchet mechanism is included, which turns the screw just by a repetitive motion of the wrist, without the need to re-grip the handle.
Standard Price: MYR 99.15 Days to Ship: 9 Day(s) -
Plastic handle screwdriver (with magnet)
TRUSCO NAKAYAMA
The bottom of the grip is a ball type, making it easier to turn the screw.
Standard Price: MYR 22.05 Days to Ship: 9 Day(s) -
Standard Price: MYR 21.35 Days to Ship: 9 Day(s) or more -
Wooden handle through screwdriver (with magnet)
TRUSCO NAKAYAMA
Special rust-resistant plating is applied.
Standard Price: MYR 25.30 Days to Ship: 9 Day(s) -
Craft Form Diamond Screwdriver
WERA
Diamond Screwdriver
[Features]
The blade is coated with fine diamond particles.
Cam out is prevented by the rough diamond particles sticking into the thread, and the hardness of the diamonds reduces blade wear, contributing to longer life.
With specially shaped grip, achieving ease of grip and good fit.
With bolster that can be securely fixed with a wrench.
[Specifications]
Set Classification: Single Item
Shaft Type: Angle
Magnet: None
Grip Type: RubberStandard Price: MYR 84.11- Days to Ship: 8 Day(s) -
Micro Screwdriver Set - 12 pcs
WERA
Uses a handle based on ergonomic design which is easy to carry, rotate and transmits torque reliably.
Standard Price: MYR 774.43 Days to Ship: 5 Day(s) or more -
WERA
Uses a handle based on ergonomic design which is easy to carry, rotate and transmits torque reliably.
Standard Price: MYR 386.90 Days to Ship: 5 Day(s) or more -
Standard Price: MYR 82.11- Days to Ship: 8 Day(s) -
WERA
1,000 V insulation specifications. This product conforms to European Standard EN60900.
Standard Price: MYR 54.35- Days to Ship: 8 Day(s) -
WERA
Body center part opens when tail part is pushed, then bits inside can be replaced for use.
Standard Price: MYR 562.40 Days to Ship: 8 Day(s) -
WERA
Replacement drivers are collected in a compact, convenient, hand-held case.
Standard Price: MYR 888.42 Days to Ship: 5 Day(s) or more -
SIGNET
[Features]
· Easy to grip ergonomic handle reduces fatigue.
· With base hexagon, a wrench can be applied for rotation.
· A through type with a grip end that has a striking area, which is ideal for removing fixed screws.Standard Price: MYR 66.00 Days to Ship: 4 Day(s) or more -
LED Electrical Screwdriver D-745
HOZAN
An LED type inspection screwdriver with high visibility.
[Features]
· Batteries can be changed.
· Applicable ranges: 100 to 240 VAC, tip size of 2.5 x 0.6 mm, total length of 139 mm, shaft length of 17 mm, shaft diameter of 2.5 mm.
· Handle diameter 16 mm, weight 23 g.
· Be sure to check the light before use.
· Be careful of short circuit and electric shock.
[Applications]
· Used for determining AC polarity and checking electrical conductance.
· Can be used within the applicable range.Standard Price: MYR 42.66 Days to Ship: 5 Day(s) or more -
Screwdriver Set for Voltage Detection Replacement Set of 6 (for Low Voltage)
VESSEL
For voltage testing and maintenance of electrical products and distribution boards in general households or industry.
Standard Price: MYR 74.89 Days to Ship: 5 Day(s) or more -
T-Shaped Ratchet Screwdriver Set
TRUSCO NAKAYAMA
[Features]
· A ratchet mechanism is included, which turns the screw just by a repetitive motion of the wrist, without the need to re-grip the handle.Standard Price: MYR 172.95 Days to Ship: 5 Day(s) or more -
TRUSCO NAKAYAMA
[Features]
· A bit with shaft diameter of 6.35 mm.
· Can also be used on ratchet screwdrivers.Standard Price: MYR 14.61 Days to Ship: 9 Day(s) -
Standard Price: MYR 9.83 Days to Ship: 8 Day(s) -
Screwdriver for electrical work with fall prevention (with magnet)
TRUSCO NAKAYAMA
[Features]
· Easy to turn and hard to tarnish, with 360 degree rotation function, driver is protected from falling at high altitude work.Standard Price: MYR 46.01 Days to Ship: 9 Day(s) -
WERA
[Features]
· Equipped with a bolster that can be firmly tightened with a wrench, etc.
· Special grip design provides an easy grip and comfortable fit.
· A strike type through screwdriver.
· It has a 6.35 mm hex shaft insertion port in the upper part of the handle to which a hex wrench with T-type handle or the like can be inserted to perform final tightening with even stronger force.Standard Price: MYR 144.63 Days to Ship: 9 Day(s) -
Straight-Slot Through Type Screwdriver With Wooden Handle
KTC(KYOTO TOOL)
[Features]
· Traditional screwdriver that makes use of the warm texture of wood.Standard Price: MYR 70.65 Days to Ship: 9 Day(s) -
Round-Blade Flathead Screwdriver
BONDHUS
High-quality flathead screwdriver made in Germany.
[Features]
· Employs a hex rubber grip/double-molded handle that is easy to apply force to.
· Powerful tightening work by inserting the blade is also possible.
· The hardness and torque values are equivalent to or exceed the German DIN standard and ISO criteria.
· Designed not to rotate during work.
· The blade tip is precision machined with a black tip.
[Applications]
· Ideal for tightening and/or loosening screws.Standard Price: MYR 54.14- Days to Ship: 10 Day(s) -
ESD (Electrostatic Discharge) Slotted Screwdriver PB 8100 ESD
PB SWISS TOOLS
[Features]
· ESD (electrostatic discharge) straight slot screwdriver
· Parallel blade tip: transmits ideal force
· No cam-out effect
· SwissGrip handle
· ESD (electrostatic discharge)
· Surface resistance: 1 MΩ to 1 GΩStandard Price: MYR 61.21- Days to Ship: 9 Day(s) or more -
Slotted Screwdriver PB 8100 RB
PB SWISS TOOLS
[Features]
· Straight slot screwdriver
· Parallel blade tip
· Color-coded according to handle sizeStandard Price: MYR 147.76 Days to Ship: 8 Day(s) -
Standard Price: MYR 91.70 Days to Ship: 9 Day(s) or more -
Screwdriver For Voltage Testing
PB SWISS TOOLS
Electroscopic screwdriver 110-250V, DIN VDE0680-6 compliant.
Standard Price: MYR 98.08 Days to Ship: 25 Day(s) or more -
Standard Price: MYR 114.70- Days to Ship: 5 Day(s) or more -
SwissGrip Precision Set Screwdriver
PB SWISS TOOLS
High-precision screwdriver
[Features]
· Slip-resistant when gripped with wet hands. Resistant to oil/gasoline.
· Wipes clean when dirtyStandard Price: MYR 63.74- Days to Ship: 9 Day(s) or more -
SwissGrip ESD Precision Set Screwdriver
PB SWISS TOOLS
High-precision ESD screwdriver
[Features]
· Slip-resistant when gripped with wet hands. Wipes clean when dirty.
[Applications]
· Electrostatic discharge (ESD): Appropriate for general workplaces where there is a possibility of electrostatic charge or discharge causing danger or damageStandard Price: MYR 77.92 Days to Ship: 8 Day(s)
| Brand |
|---|
| Product Series |
| Days to Ship |
| Tip standards |
| Tip size / Phillips (+) |
| Tip size / flathead (-) blade width (mm) B1 |
| Shaft length L (mm) |
| Single Product/Set Classification |
| Shaft type |
| Magnet |
| Shaft through |
| Bolster |
| Grip Type |
| Tip size / flathead (-) blade thickness (mm) B2 |
| (Box/Hex/Ball-Point) Width Across Flats (mm) |
| (Box/Hex/Ball-Point) Width Across Flats (inch) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | WERA | WERA | WERA | WERA | WERA | WERA | WERA | SIGNET | HOZAN | VESSEL | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | ANEX | TRUSCO NAKAYAMA | WERA | KTC(KYOTO TOOL) | BONDHUS | PB SWISS TOOLS | PB SWISS TOOLS | PB SWISS TOOLS | PB SWISS TOOLS | PB SWISS TOOLS | PB SWISS TOOLS | PB SWISS TOOLS |
| Product Series | Screwdriver Set for Voltage Detection Replacement Set of 6 (for Low Voltage) | Screwdriver for electrical work with fall prevention (with magnet) | ESD (Electrostatic Discharge) Slotted Screwdriver PB 8100 ESD | ||||||||||||||||||||||||||
| Days to Ship | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) or more | 9 Day(s) | 8 Day(s) | 5 Day(s) or more | 5 Day(s) or more | 8 Day(s) | 8 Day(s) | 8 Day(s) | 5 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 9 Day(s) | 8 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 10 Day(s) | 9 Day(s) or more | 8 Day(s) | 9 Day(s) or more | 25 Day(s) or more | 5 Day(s) or more | 9 Day(s) or more | 8 Day(s) |
| Tip standards | Flathead (-) | Phillips (+)/Flathead(-) | Flathead (-) | Flathead (-) | Flathead (-) | Flathead (-) | Combination | Phillips (+)/Flathead(-) | Flathead (-) / Phillips (+)/Flathead(-) | Flathead (-) | Combination | Combination | Flathead (-) | Flathead (-) | Combination | Combination | Flathead (-) | Flathead (-) | Flathead (-) | Flathead (-) | Flathead (-) | Flathead (-) | Flathead (-) | Flathead (-) | Flathead (-) | Flathead (-) | Flathead (-) | Flathead (-) | Flathead (-) |
| Tip size / Phillips (+) | - | No.0 / No.1 / No.2 | - | - | - | - | No.00 / No.0 | No.00 / No.0 | No.1 | - | No.1 / No.2 | No.1 / No.2 / No.3 | - | - | No.1 / No.2 | No.1 / No.2 / No.3 | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Tip size / flathead (-) blade width (mm) B1 | 5.5 | 1.8 ～ 6 | 5.5 | 5.5 | 5.5 | 4 ～ 5.5 | 1.5 ～ 3 | 1.2 ～ 3 | 4 | 4 ～ 5.5 | 5.5 ～ 6.5 | 5.5 ～ 8 | 5.5 | 2.5 | 4 ～ 6 | 4 ～ 7 | 4 ～ 5.5 | 2.5 | 5.5 | 5.5 | 5.5 | 4 ～ 5.5 | 2.5 ～ 5.5 | 5.5 | 4 ～ 5.5 | 2.5 | 4 ～ 5.5 | 2.5 | 2.5 |
| Shaft length L (mm) | 75 ～ 150 | - | 75 | 75 | 75 | 90 ～ 100 | - | - | - | - | - | - | 75 | 17 | - | - | - | 100 | 100 | 103 | 75 | 75 ～ 125 | 80 ～ 120 | 120 | 30 | 50 | - | - | - |
| Single Product/Set Classification | Single Item | Set Product | Single Item | Single Item | Single Item | Single Item | Set Product | Set Product | Single Item | Single Item | Set Product | Set Product | Single Item | Single Item | Set Product | Set Product | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | - | - |
| Shaft type | Round | Round | Round | Round | Round | Square | Round | Round | Round | Round | Round | Round | Round | Round | - | - | - | Round | Round | - | Round | - | Round | Round | Round | Round | Round | - | - |
| Magnet | Available | NA | Available | Available | Available | NA | NA | NA | NA | NA | NA | NA | NA | NA | - | - | NA | NA | Available | - | NA | - | - | - | - | - | - | - | - |
| Shaft through | NA | NA | NA | NA | Available | NA | NA | NA | - | NA | - | - | Available | NA | - | - | - | NA | NA | Available | Available | - | NA | NA | NA | - | - | - | - |
| Bolster | NA | NA | NA | NA | NA | Included | NA | NA | - | NA | - | - | NA | NA | - | - | - | NA | NA | Included | NA | - | NA | NA | NA | - | - | - | - |
| Grip Type | Rubber | Resin | Resin | Wooden handle | Wooden handle | Rubber | Rubber | Rubber | - | - | Rubber | Rubber | Resin | Resin | Resin | - | - | Resin | Resin | - | Wooden handle | - | - | - | - | - | - | - | - |
| Tip size / flathead (-) blade thickness (mm) B2 | - | - | - | - | - | - | - | - | - | - | - | - | 0.75 | 0.6 | - | - | - | 0.4 | - | - | 0.7 | 0.8 ～ 1 | 0.4 ～ 0.8 | 0.8 | 0.8 | 0.5 | 0.8 | 0.4 | 0.4 |
| (Box/Hex/Ball-Point) Width Across Flats (mm) | - | - | - | - | - | - | 0.9 ～ 2 | - | - | - | 6 | 3 ～ 5 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| (Box/Hex/Ball-Point) Width Across Flats (inch) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Tip standards
- Phillips (+)
- Flathead (-)
- Phillips (+)/Flathead(-)
- Torx
- Box
- Hexagon
- Ballpoint
- Combination
- Other
-
Tip size / Phillips (+)
- No.000
- No.00
- No.0
- No.1
- No.2
- No.3
- No.4
- Other
-
Tip size / flathead (-) blade width (mm) B1
-
Shaft length L (mm)
- 5
- 9
- 10
- 11
- 13
- 14
- 15
- 16
- 17
- 18
- 18～90
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 28
- 30
- 35
- 36
- 38
- 40
- 41
- 45
- 50
- 51
- 57
- 60
- 60, 75, 80
- 60, 80, 100
- 65
- 66
- 67
- 70
- 75
- 75 (PGMD-075), 100 (PGMD-100), 25 (PGSD-M2), 75 (PGPD-001), 100 (PGPD-002), 150 (PGPD-003), 25 (PGSD-P2)
- 75 (PGMD-075), 100 (PGMD-100), 150 (PGMD-150), 25 (PGSD-M2), 75 (PGPD-001), 100 (PGPD-002), 150 (PGPD-003), 25 (PGSD-P2)
- 75 (PGMD-075), 100 (PGMD-100), 150 (PGMD-150), 75 (PGPD-001), 100 (PGPD-002), 150 (PGPD-003)
- 75~150
- 76
- 80
- 80, 100, 125
- 82
- 85
- 89
- 90
- 95
- 100
- 102
- 103
- 105
- 107
- 110
- 115
- 120
- 122
- 125
- 128
- 130
- 135
- 138
- 140
- 145
- 150
- 152
- 153
- 160
- 165
- 167
- 170
- 175
- 180
- 190
- 195
- 200
- 220
- 225
- 230
- 240
- 250
- 267
- 275
- 288
- 300
- 320
- 390
- 400
- 450
- 500
- 600
-
Single Product/Set Classification
- Single Item
- Set Product
-
Shaft type
-
Magnet
- Available
- NA
-
Shaft through
- Available
- NA
-
Bolster
- Included
- NA
-
Grip Type
- Resin
- Wooden handle
- Rubber
- Stainless Steel
-
Tip size / flathead (-) blade thickness (mm) B2
-
(Box/Hex/Ball-Point) Width Across Flats (mm)
-
(Box/Hex/Ball-Point) Width Across Flats (inch)
Narrow search by specifying Manufacturer
-
- PB SWISS TOOLS (22)
- VESSEL (19)
- WERA (15)
- KTC(KYOTO TOOL) (13)
- TRUSCO NAKAYAMA (13)
- ENGINEER (9)
- ANEX (7)
- HOZAN (4)
- TONE (4)
- WIHA (3)
- HIRAI KOGU (2)
- SK 11 (2)
- BONDHUS (1)
- HANDIWORK (1)
- SUNFLAG (1)
- SIGNET (1)
- SUEKAGE TOOL (1)
- TRAD (1)
- ARC (0)
- MITOLOY (0)
- E VALUE (0)
- FUJIYA (0)
- HIOS (0)
- SMATO (0)
- TOP (0)
- AS ONE (0)
- ESCO (0)
- HAZET (0)
- KO-KEN TOOL (0)
- EIGHT TOOL (0)
- WILLIAMS (0)
CAD
-
- 2D
- 3D
Related Categories to Screwdrivers
-
- Wrenches / Offset Wrenches / Ratchet Wrenches
- Hex Wrenches
- Monkey Wrenches
- Torx Wrenches
- Socket Wrenches
- Torque Wrenches
- Screwdrivers
- Torque Screwdrivers
- Pliers/Nippers/Pincers
- Hammers
- Tool Sets / Tool Boxes
- Cutter Knives
- Chisels
- Screwdriver Bits
- Socket Bits
- Crowbars
- Pullers
- Tweezers
- Engravers/Punches
- Vehicle Maintenance Tools
- Tools for Water Supply Faucets and Air-Conditioning Piping
- Cutting Tools
- Insulation Tools
- Sheet Metal Tools
- Explosion-Proof Hand Tools
- Caulking Tools
- Tools Used at Electric Facilities
- Crowbars
-
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy