(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Screwdrivers（Page3）
| Days to Ship |
|
|---|
-
"Radial Ball Grip Switchable Screwdriver" (4 Sizes, Magnetic)
TRUSCO NAKAYAMA
[Features]
· Supports 4 sizes ((-) 6, (+) No.1, (+) No.2, (+) No.3) with a single unit.
· The radially processed grip does not become slippery even with greasy hands.
· It generates a powerful tightening torque, and has a strong ball cushioned grip.Standard Price: MYR 38.63 Days to Ship: 9 Day(s) -
TRUSCO NAKAYAMA
[Features]
· Great for working up high, in deep areas or other places that are hard to reach.
· Can connect to a T-Bar handle (TBH-1) or chargeable impact screwdriver.
· Quick release chuck with fall prevention to stop bits from falling out.
· Has stabilizing handle, allowing for work with a stable posture.Standard Price: MYR 85.13- Days to Ship: 9 Day(s) -
TRUSCO NAKAYAMA
[Features]
· Can be used for a wide range of applications, such as in-factory work, maintenance of machinery and vehicles, etc.
· Commercially-available bits can be used with the hex holes on the rear of the handle, and deep screw tightening can be achieved by installing long bits.Standard Price: MYR 35.49- Days to Ship: 5 Day(s) or more -
Offset Ratchet Driver TRD-415·TRD-417
TRUSCO NAKAYAMA
[Features]
· The ratchet mechanism enables fast turning in tight spaces.
[Applications]
· For screw removal work in narrow places.Standard Price: MYR 37.39- Days to Ship: 5 Day(s) or more -
WERA
[Features]
· The lasered tip provides exceptional bite into screws.
· Special grip design provides an easy grip and comfortable fit.Standard Price: MYR 95.39- Days to Ship: 2 Day(s) or more -
WERA
[Features]
· The lasered tip provides exceptional bite into screws.
· Special grip design provides an easy grip and comfortable fit.
· Equipped with a bolster that can be firmly tightened with a wrench, etc.Standard Price: MYR 129.31- Days to Ship: 8 Day(s) -
Chisel Driver Set (Penetrating Type)
WERA
Special grip design provides an easy grip and comfortable fit.
Standard Price: MYR 837.78 Days to Ship: 8 Day(s) -
Craft Form Plus Chisel Screwdriver
WERA
[Features]
· A strike type through screwdriver.
· Equipped with a bolster that can be firmly tightened with a wrench, etc.
· Special grip design provides an easy grip and comfortable fit.Standard Price: MYR 136.51- Days to Ship: 8 Day(s) -
Craft Form Compact Screwdriver Bit
WERA
Compact Srewdrriver bit
[Features]
Rapid adapter function, Locks simply when fitted with a bit.
When detaching, pressing the sleeve forward causes the spring function to push up the bit from the magnet and the lock is disengaged.
The tip bit is stored in the holder body.
The bit can also be removed and connected to an electric drill.
[Specifications]
Black Point Processed, Matte Nickel Finish
Bits Overall Length at the Time of Mounting: 200mm
Shank Diameter: 6.35mm
Bit Full Length: 25mm
Holder Overall Length: 118mm
Mass: 260g/setStandard Price: MYR 862.64 Days to Ship: 9 Day(s) -
Craft Form Stainless Steel Screwdriver
WERA
[Features]
· Special grip design provides an easy grip and comfortable fit.Standard Price: MYR 136.81- Days to Ship: 8 Day(s) or more -
SwissGrip Cross-head Screwdriver
PB SWISS TOOLS
Screwdriver made from 2 new materials: polypropylene and santoprene.
[Features]
· The symbol and size of the driver tip shape are shown on the rear of the handle.
· A screwdriver suited for the task can be selected quickly.
· The handle shape features the same ergonomic design as the Multi-craft.
· The carefully selected surface material is close to the hardness of human hands, making it feel soft and warm.
· With a special surface structure, the handle can be grasped firmly even with wet hands.
· Resistant to oil and gasoline, allowing it to be easily cleaned. Heat resistance of 140°C.
[Applications]
· Convenient for high-tech fields, assembly lines, and home use. Ideal for rapid turning.Standard Price: MYR 116.84- Days to Ship: 1 Day(s) or more -
Plastic Screwdriver Stand (Standard)
PB SWISS TOOLS
A Phillips screwdriver with excellent shock resistance.
[Features]
· It can be used for general applications. Recyclable clip.
· The grip surface fits the hand and the groove design is ergonomic, allowing high torque to be applied.
· The high quality and transparent CAB material is extremely resistant to impacts as well as resistant to oil and gasoline, and can be recycled.
· Gentle to the skin and comfortably gripped. Vanilla aromas are blended to suppress smells.
· The shock resistance is 1 t. Resistant to oil and gasoline.
[Applications]
· Ideal for manufacturing industries, assembly sites, repairs, artisan handcrafting, DIY, hobbies, and more.Standard Price: MYR 96.08- Days to Ship: 5 Day(s) or more -
Replacement Screwdriver Blades (Phillips)
PB SWISS TOOLS
215 series Phillips screwdriver blade. Can be combined and used with 215A, 7215AG or 8215A handles for the replacement screwdrivers.
Standard Price: MYR 67.74 Days to Ship: 5 Day(s) or more -
Replacement Strong Screwdriver Set 【8 Pieces Per Package】
PB SWISS TOOLS
[Features]
· The joint is a foldable type that can be used straight in rapid-turning and bent by 90° when fastening forcefully.
· The grip is made of CAB (cellulose acetate butyrate) containing natural plant or cotton-based materials.
· Grip is easy on the skin, ideal for gripping, impact-resistant and easy to maintain.
· PB manufactures the handles without the use of cadmium, using a single recyclable material in order to achieve environment-friendly production.Standard Price: MYR 1,281.13 Days to Ship: 9 Day(s) -
Replacement Strong Screwdriver Blades (Phillips)
PB SWISS TOOLS
225 series Phillips screwdriver blade. Can be combined and used with 225A handles and multi-torque for the replacement screwdrivers.
Standard Price: MYR 110.79 Days to Ship: 5 Day(s) or more -
Screwdriver Set, PB 250(7 pieces set) 【4-7 Pieces Per Package】
PB SWISS TOOLS
A set of screwdrivers.
[Features]
· A new color insert type has joined the most popular, classic handle Phillips/flathead screwdrivers.
· Facilitates tool management by color-coding inserts by person or departmentStandard Price: MYR 363.41- Days to Ship: 9 Day(s) or more -
PB SWISS TOOLS
A set of screwdrivers. Holder included.
[Features]
· A new color insert type has joined the most popular, classic handle Phillips/flathead screwdrivers.
· Facilitates tool management by color-coding inserts by person or departmentStandard Price: MYR 294.30- Days to Ship: 5 Day(s) or more -
Multi Craft Phillips Screwdriver
PB SWISS TOOLS
The multi-craft grip has a large outer diameter, making it easy to apply torque.
[Features]
· Multicraft handle that makes it easy to apply torque and does not slip even if hands are oily.Standard Price: MYR 99.14- Days to Ship: 5 Day(s) or more -
Standard Price: MYR 1,033.26 Days to Ship: 5 Day(s) or more -
Standard Price: MYR 813.02 Days to Ship: 5 Day(s) or more -
Replacement Type Ratchet Screwdriver Insider 3
PB SWISS TOOLS
[Features]
· Can be switched among clockwise, counterclockwise, and fixed positions.
· A ratchet screwdriver used in combination with C6 Series (1/4 hex) bit. 10 bits can be stored in the grip (1/4 hex type).Standard Price: MYR 720.85 Days to Ship: 9 Day(s) -
Swiss Grip Phillips Screwdriver (With Hexagon Base)
PB SWISS TOOLS
[Features]
· Soft-to-the-touch Swiss grip screwdriver.Standard Price: MYR 157.39 Days to Ship: 8 Day(s) -
Swiss Grip Through Screwdriver Set (6 Pcs Set)
PB SWISS TOOLS
Screwdriver set made from 2 new materials: polypropylene and santoprene.
[Features]
· The symbol and size of the driver tip shape are shown on the rear of the handle. The screwdriver can be selected immediately.
· The handle shape features the same ergonomic design as the Multi-craft.
· The carefully selected surface material is close to the hardness of human hands, making it feel soft and warm. It does not easily slip even when gripping with a wet hand.
· Resistant to oil and gasoline, allowing it to be easily cleaned. Heat resistance of 140°C.
· The tip shape and size are engraved on the metal plate (grip end) of the striking part.
[Applications]
· Convenient for high-tech fields, assembly lines, and home use. Ideal for rapid turning.
· In addition to the striking part, a hexagonal part is provided at the root of the blade, ideal for loosening stuck screws.Standard Price: MYR 1,018.27 Days to Ship: 2 Day(s) -
Standard Price: MYR 106.74- Days to Ship: 8 Day(s) or more -
PB SWISS TOOLS
[Features]
· Effective for work in a limited space where a normal screwdriver cannot be used.
· The angle of each end is different (in the rotating direction), and it is possible to rotate bit by bit.Standard Price: MYR 88.49- Days to Ship: 8 Day(s) -
Soft screwdriver (with magnet)
KTC(KYOTO TOOL)
[Features]
· The grip is light, not sticky, and uses environmentally friendly elastomer resin.
· The shaft is round.Standard Price: MYR 45.29- Days to Ship: 9 Day(s) -
Soft screwdriver (penetrating type with magnet)
KTC(KYOTO TOOL)
[Features]
· The grip is light, not sticky, and uses environmentally friendly elastomer resin.
· The shaft is round.
· Through-hole type.Standard Price: MYR 54.19- Days to Ship: 9 Day(s) -
Soft screwdriver (stubby type with magnet)
KTC(KYOTO TOOL)
[Features]
· Shaft material is Cr-V.
· The grip is light, not sticky, and uses environmentally friendly elastomer resin.
[Applications]
· General purpose toolStandard Price: MYR 31.02 Days to Ship: 9 Day(s) -
Gift Screwdriver Set (With Magnet)
KTC(KYOTO TOOL)
[Features]
· Shaft material is Cr-V.
· The grip is light, not sticky, and uses environmentally friendly elastomer resin.
[Applications]
· General purpose toolStandard Price: MYR 54.21- Days to Ship: 8 Day(s) or more -
Soft Screwdriver set (With Magnet)
KTC(KYOTO TOOL)
[Features]
· Shaft material is Cr-V.
· The grip is light, not sticky, and uses environmentally friendly elastomer resin.Standard Price: MYR 345.30- Days to Ship: 8 Day(s) -
Resin Handle Screwdriver Long Round Shaft
KTC(KYOTO TOOL)
[Features]
· The product is elastic, featuring resin grips that are gentle to handle.
· The shaft is round.
[Applications]
· General purpose toolStandard Price: MYR 107.28 Days to Ship: 9 Day(s) -
Resin Handle Stubby Screwdriver (D1MS-6/D1PS-2)
KTC(KYOTO TOOL)
[Features]
· Square resin grip which makes it easy to apply force.
· Shaft is hexagon shaped.
[Applications]
· General purpose toolStandard Price: MYR 32.69 Days to Ship: 9 Day(s) -
Resin Handle Stubby Screwdriver
KTC(KYOTO TOOL)
[Features]
· Convenient for removing and inserting screws in narrow spaces.
· The shaft material is SWRH62A.
[Applications]
· General purpose toolStandard Price: MYR 29.76 Days to Ship: 9 Day(s) -
Resin Handle Screwdriver (with Throughput/Magnet)_with Bolster
KTC(KYOTO TOOL)
[Features]
· Square resin grip which makes it easy to apply force.
· There is a hexagonal part at the base of the shaft.
· Shaft is hexagon shaped.
· Shaft material is Cr-V.
[Applications]
· General purpose toolStandard Price: MYR 64.30- Days to Ship: 9 Day(s) -
Resin handle screwdriver set (Penetration, magnet included)
KTC(KYOTO TOOL)
[Features]
· Shaft material is Cr-V.
[Applications]
· General purpose toolStandard Price: MYR 468.61- Days to Ship: 9 Day(s) -
Resin Handle Screwdriver Long (with Throughput/Magnet)
KTC(KYOTO TOOL)
[Features]
· Square resin grip which makes it easy to apply force.
· There is a hexagonal part at the base of the shaft.
· Shaft is hexagon shaped.
· Shaft material is Cr-V.
[Applications]
· General purpose toolStandard Price: MYR 116.50- Days to Ship: 9 Day(s) -
KTC(KYOTO TOOL)
[Features]
· A screwdriver with improved strength due to a thicker, longer shaft, and a sturdy joint between shaft and handle.
· The shaft material is SWRH62A.
[Applications]
· General purpose toolStandard Price: MYR 166.13 Days to Ship: 9 Day(s) -
Wooden handle screwdriver (through, with magnet)
KTC(KYOTO TOOL)
[Features]
· Natural wooden grip which is easy on the hands.
· The shaft is round.
· Shaft material is Cr-V.
· The tip is magnetic.
[Applications]
· General purpose toolStandard Price: MYR 53.73- Days to Ship: 9 Day(s) -
Ratchet driver DBR【1-8 Pieces Per Package】
KTC(KYOTO TOOL)
[Features]
· The ratchet mechanism enables fast turning in both directions for loosening and tightening.
· Fixing the ratchet allows it to be used as a normal screwdriver.
[Applications]
· General purpose toolStandard Price: MYR 235.21- Days to Ship: 9 Day(s) -
Plate ratchet replacement screwdriver
KTC(KYOTO TOOL)
[Features]
· Ratchet operation in both right and left directions is possible with switching lever.
· Rapid rotation is possible by rotating the gear with the fingertips.
· Can use 6.3 mm width across flats hex bits.Standard Price: MYR 81.60- Days to Ship: 8 Day(s) or more -
Plate Ratchet Replacement Driver【1-4 Pieces Per Package】
KTC(KYOTO TOOL)
[Features]
· This is a 6.3 mm subtense shaft bit set usable with panel ratchet replacement driver (TMDB8, RM22, RM32).Standard Price: MYR 68.03- Days to Ship: 9 Day(s) -
Integrated Type 2 Way Ratchet Screwdriver
HANDIWORK
[Features]
· Adapter with magnet to prevent screws from falling.
· Dual head bit with screw drop prevention magnet.
· Smooth rotations for more effective tightening and minimal loss. The number of gear teeth is 42.
· Easy-work ratchet typeStandard Price: MYR 98.07 Days to Ship: 10 Day(s) or more -
Micro Impact Screwdriver Set (7 Pcs.)
TRAD
Ideal for tightening and loosening screws with stripped heads or rusty screws. For detailed work that requires securing a screw or bolt with the stripe of a hammer of via torque.
Standard Price: MYR 76.88 Days to Ship: 4 Day(s) or more -
2WAY Ultra Slim Ratchet Screwdriver
TRAD
Double head with straight and bent noses
18 mm Ultra-thin Head (Bit Included)
Rising angle: 15°Standard Price: MYR 70.32 Days to Ship: 9 Day(s) or more -
8in1 Screwdriver Set 【6 Pieces Per Package】
TRAD
8-piece budget screwdriver set. With an insert grip that makes it easy to exert force.
Standard Price: MYR 71.98 Days to Ship: 42 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Tip standards |
| Tip size / Phillips (+) |
| Tip size / flathead (-) blade width (mm) B1 |
| Shaft length L (mm) |
| Single Product/Set Classification |
| Shaft type |
| Magnet |
| Shaft through |
| Bolster |
| Grip Type |
| Tip size / flathead (-) blade thickness (mm) B2 |
| (Box/Hex/Ball-Point) Width Across Flats (mm) |
| (Box/Hex/Ball-Point) Width Across Flats (inch) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | WERA | WERA | WERA | WERA | WERA | WERA | PB SWISS TOOLS | PB SWISS TOOLS | PB SWISS TOOLS | PB SWISS TOOLS | PB SWISS TOOLS | PB SWISS TOOLS | PB SWISS TOOLS | PB SWISS TOOLS | PB SWISS TOOLS | PB SWISS TOOLS | PB SWISS TOOLS | PB SWISS TOOLS | PB SWISS TOOLS | PB SWISS TOOLS | PB SWISS TOOLS | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | HANDIWORK | TRAD | TRAD | TRAD |
| Product Series | "Radial Ball Grip Switchable Screwdriver" (4 Sizes, Magnetic) | Screwdriver Set, PB 250(7 pieces set) 【4-7 Pieces Per Package】 | Resin Handle Screwdriver (with Throughput/Magnet)_with Bolster | ||||||||||||||||||||||||||||||||||||||||||
| Days to Ship | 9 Day(s) | 9 Day(s) | 5 Day(s) or more | 5 Day(s) or more | 2 Day(s) or more | 8 Day(s) | 8 Day(s) | 8 Day(s) | 9 Day(s) | 8 Day(s) or more | 1 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 9 Day(s) | 5 Day(s) or more | 9 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 9 Day(s) | 8 Day(s) | 2 Day(s) | 8 Day(s) or more | 8 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 8 Day(s) or more | 8 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 8 Day(s) or more | 9 Day(s) | 10 Day(s) or more | 4 Day(s) or more | 9 Day(s) or more | 42 Day(s) or more |
| Tip standards | Phillips (+)/Flathead(-) | Phillips (+) | Phillips (+) / Phillips (+)/Flathead(-) | Phillips (+)/Flathead(-) / Combination | Phillips (+) | Phillips (+) | Phillips (+)/Flathead(-) | Phillips (+) | Phillips (+)/Flathead(-) | Phillips (+) | Phillips (+) | Phillips (+) | Phillips (+) | Combination | Phillips (+) | Phillips (+) / Phillips (+)/Flathead(-) | Phillips (+)/Flathead(-) | Phillips (+) | Combination | Combination | Combination | Phillips (+) | Phillips (+)/Flathead(-) | Phillips (+) | Phillips (+) | Phillips (+) | Phillips (+) | Phillips (+) | Phillips (+)/Flathead(-) | Phillips (+)/Flathead(-) | Phillips (+) | Phillips (+) | Phillips (+) | Phillips (+) | Phillips (+)/Flathead(-) | Phillips (+) | Phillips (+) | Phillips (+) | Combination | Phillips (+) / Combination | Phillips (+) | Phillips (+)/Flathead(-) | Combination | Combination | Phillips (+)/Flathead(-) |
| Tip size / Phillips (+) | No.2 / No.3 | No.2 | No.2 | No.2 / No.3 | No.2 / No.3 / No.4 | No.2 / No.3 | No.2 / No.3 | No.2 / No.3 / No.4 | No.2 / No.3 | No.2 / No.3 | No.2 / No.3 | No.2 / No.3 / No.4 | No.2 | No.2 / No.3 | No.2 / No.3 | No.2 / No.3 | No.2 | No.2 / No.3 | No.2 / No.3 | No.2 / No.3 | No.2 | No.2 | No.2 / No.3 | No.2 / No.3 | No.2 / No.3 | No.2 / No.3 | No.2 / No.3 | No.2 | No.2 | No.2 / No.3 | No.2 | No.2 | No.2 | No.2 / No.3 | No.2 / No.3 | No.2 / No.3 | No.3 | No.2 / No.3 | No.2 / No.3 | No.2 / No.3 | No.2 / No.3 | No.2 | No.2 | No.2 / No.3 | No.2 |
| Tip size / flathead (-) blade width (mm) B1 | 6 | - | 6 | 4.5 ～ 6 | - | - | 3.5 ～ 9 | - | 4.5 ～ 6.5 | - | - | - | - | - | - | 3.5 ～ 8 | 3.5 ～ 6.5 | - | 4 ～ 8 | 4 ～ 8 | 5.5 ～ 6.25 | - | 5.5 ～ 8 | - | - | - | - | - | 6 | 5.5 ～ 8 | - | - | - | - | 5.5 ～ 8 | - | - | - | 5.5 ～ 8 | - | - | 5.5 | 5.5 | 6 | 3 ～ 6 |
| Shaft length L (mm) | 100 | - | - | - | 100 ～ 300 | 100 ～ 150 | 80 ～ 150 | 100 ～ 200 | - | 100 ～ 150 | 150 ～ 200 | 75 ～ 400 | 120 | - | - | - | 90 ～ 140 | 100 ～ 600 | - | - | - | 100 | 80 ～ 150 | 40 | - | 100 ～ 300 | 100 ～ 150 | 25 | 25 ～ 100 | 25 ～ 150 | 288 | 25 | 26 | 100 ～ 150 | 26 ～ 150 | 300 | 150 | 100 ～ 150 | - | - | - | - | - | - | - |
| Single Product/Set Classification | Single Item | Set Product | Single Item / Set Product | Single Item / Set Product | Single Item | Single Item | Set Product | Single Item | Set Product | Single Item | Single Item | Single Item | Single Item | Set Product | Single Item | Set Product | Set Product | Single Item | Set Product | Set Product | Set Product | Single Item | Set Product | Single Item | Single Item | Single Item | Single Item | Single Item | Set Product | Set Product | Single Item | Single Item | Single Item | Single Item | Set Product | Single Item | Single Item | Single Item | Set Product | Single Item / Set Product | Set Product | Set Product | Set Product | Set Product | Set Product |
| Shaft type | Round | Square | - | - | Round | Square | Round | Round | - | Round | Round | Round | Round | Round | Round | Round | Round | Round | Square | Square | - | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Square | Square | Square | - | Square | - | Round |
| Magnet | Available | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | Available | Available | Available | Available | Available | NA | Available | Available | Available | Available | Available | NA | Available | NA | NA | NA | Available | NA | NA | NA |
| Shaft through | - | - | - | - | NA | NA | Available | Available | - | NA | NA | NA | - | - | - | NA | NA | NA | - | - | - | NA | Available | NA | NA | NA | Available | NA | NA | Available / NA | NA | NA | NA | Available | Available | Available | Available | Available | - | - | - | - | NA | NA | NA |
| Bolster | NA | - | - | - | NA | Included | Included | Included | - | NA | NA | NA | - | - | - | NA | NA | NA | - | - | - | Included | Included | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | Included | Included / NA | Included | NA | NA | - | - | - | - | NA | NA | NA |
| Grip Type | Rubber | - | Resin | Stainless Steel | Rubber | Rubber | Rubber | Rubber | Rubber | Rubber | Resin | Resin | - | Resin | - | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Resin | - | Rubber | Rubber | Rubber | Rubber | Rubber | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Wooden handle | Rubber | Stainless Steel | - | Resin | - | - | Resin |
| Tip size / flathead (-) blade thickness (mm) B2 | - | - | - | - | - | - | - | - | 0.6 ～ 1.2 | - | - | - | - | - | - | 0.5 ～ 1.2 | 0.5 ～ 1 | - | 0.6 ～ 1.2 | 0.6 ～ 1.2 | 0.8 ～ 1 | - | 0.8 ～ 1.2 | - | - | - | - | - | 0.8 ～ 0.95 | 0.75 ～ 1.1 | - | - | - | - | 0.7 ～ 1.2 | - | - | - | - | - | - | - | - | - | - |
| (Box/Hex/Ball-Point) Width Across Flats (mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | 3 ～ 8 | - | - | - | - | 2.5 ～ 6 | 2.5 ～ 6 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1.5 ～ 8 | 4 ～ 6 | - | - | 5.5 ～ 8 | 3 ～ 4 | - |
| (Box/Hex/Ball-Point) Width Across Flats (inch) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Tip standards
- Phillips (+)
- Flathead (-)
- Phillips (+)/Flathead(-)
- Torx
- Box
- Hexagon
- Ballpoint
- Combination
- Other
-
Tip size / Phillips (+)
- No.000
- No.00
- No.0
- No.1
- No.2
- No.3
- No.4
- Other
-
Tip size / flathead (-) blade width (mm) B1
-
Shaft length L (mm)
- 5
- 9
- 10
- 11
- 13
- 14
- 15
- 16
- 17
- 18
- 18～90
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 28
- 30
- 35
- 36
- 38
- 40
- 41
- 45
- 50
- 51
- 57
- 60
- 60, 75, 80
- 60, 80, 100
- 65
- 66
- 67
- 70
- 75
- 75 (PGMD-075), 100 (PGMD-100), 25 (PGSD-M2), 75 (PGPD-001), 100 (PGPD-002), 150 (PGPD-003), 25 (PGSD-P2)
- 75 (PGMD-075), 100 (PGMD-100), 150 (PGMD-150), 25 (PGSD-M2), 75 (PGPD-001), 100 (PGPD-002), 150 (PGPD-003), 25 (PGSD-P2)
- 75 (PGMD-075), 100 (PGMD-100), 150 (PGMD-150), 75 (PGPD-001), 100 (PGPD-002), 150 (PGPD-003)
- 75~150
- 76
- 80
- 80, 100, 125
- 82
- 85
- 89
- 90
- 95
- 100
- 102
- 103
- 105
- 107
- 110
- 115
- 120
- 122
- 125
- 128
- 130
- 135
- 138
- 140
- 145
- 150
- 152
- 153
- 160
- 165
- 167
- 170
- 175
- 180
- 190
- 195
- 200
- 220
- 225
- 230
- 240
- 250
- 267
- 275
- 288
- 300
- 320
- 390
- 400
- 450
- 500
- 600
-
Single Product/Set Classification
- Single Item
- Set Product
-
Shaft type
-
Magnet
- Available
- NA
-
Shaft through
- Available
- NA
-
Bolster
- Included
- NA
-
Grip Type
- Resin
- Wooden handle
- Rubber
- Stainless Steel
-
Tip size / flathead (-) blade thickness (mm) B2
-
(Box/Hex/Ball-Point) Width Across Flats (mm)
-
(Box/Hex/Ball-Point) Width Across Flats (inch)
Narrow search by specifying Manufacturer
-
- VESSEL (60)
- TRUSCO NAKAYAMA (30)
- ANEX (28)
- KTC(KYOTO TOOL) (25)
- TONE (23)
- ENGINEER (22)
- PB SWISS TOOLS (20)
- WERA (11)
- HIRAI KOGU (9)
- HOZAN (8)
- WIHA (7)
- KO-KEN TOOL (6)
- SUNFLAG (4)
- SK 11 (4)
- BONDHUS (3)
- TRAD (3)
- E VALUE (2)
- SUEKAGE TOOL (2)
- HANDIWORK (1)
- SMATO (1)
- SIGNET (1)
- ARC (0)
- MITOLOY (0)
- FUJIYA (0)
- HIOS (0)
- TOP (0)
- AS ONE (0)
- ESCO (0)
- HAZET (0)
- EIGHT TOOL (0)
- WILLIAMS (0)
CAD
-
- 2D
- 3D
Related Categories to Screwdrivers
-
- Wrenches / Offset Wrenches / Ratchet Wrenches
- Hex Wrenches
- Monkey Wrenches
- Torx Wrenches
- Socket Wrenches
- Torque Wrenches
- Screwdrivers
- Torque Screwdrivers
- Pliers/Nippers/Pincers
- Hammers
- Tool Sets / Tool Boxes
- Cutter Knives
- Chisels
- Screwdriver Bits
- Socket Bits
- Crowbars
- Pullers
- Tweezers
- Engravers/Punches
- Vehicle Maintenance Tools
- Tools for Water Supply Faucets and Air-Conditioning Piping
- Cutting Tools
- Insulation Tools
- Sheet Metal Tools
- Explosion-Proof Hand Tools
- Caulking Tools
- Tools Used at Electric Facilities
- Crowbars
-
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy