(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
| Days to Ship |
|
|---|

Under-Neck Short Ball Point L Type Wrench Set BSB900S
TONE
Hexagonal bar wrench ideal for tightening/loosening inch-sized hexagonal socket bolts, etc., in spaces where there are height restrictions.
[Features]
· Uses a special alloy to enhance torque, durability, and abrasion resistance.
· High-level heat treatment/hard chrome plating treatment.
· The ball point finish enables quick turning and temporary tightening from a diagonal position.
· L-shaped standard type with short underhead. 9-piece set.
[Applications]
· Ideal for maintenance and assembly of devices using imperial-size bolts, such as vehicles from outside Japan, motorcycles, and other imported machinery.
| Standard Price: | MYR 433.23 |
|---|---|
| Days to Ship: | 9 Day(s) |

Short Stem Long Ball-Point L-Shaped Wrench BLB-S
TONE
Hexagonal bar wrench ideal for tightening/loosening inch-sized hexagonal socket bolts, etc., in spaces where there are height restrictions.
[Features]
· Uses a special alloy to enhance torque, durability, and abrasion resistance.
· High-level heat treatment/hard chrome plating treatment.
· The ball point finish enables quick turning and temporary tightening from a diagonal position.
· L-shaped long type with a short underhead length.
[Applications]
· Ideal for maintenance and assembly of devices using imperial-size bolts, such as vehicles from outside Japan, motorcycles, and other imported machinery.
| Standard Price: | MYR 40.25- |
|---|---|
| Days to Ship: | 9 Day(s) or more |

Under-Neck Short Long Ball Point L Type Wrench Set BLB900S
TONE
Hexagonal bar wrench set ideal for tightening/loosening inch-sized hexagonal socket bolts, etc., in spaces where there are height restrictions.
[Features]
· Minimized neck length L-shaped long type.
· 9-piece set.
· The ball point finish enables quick turning and temporary tightening from a diagonal position.
· Uses a special alloy to enhance torque, durability, and abrasion resistance.
· High-level heat treatment/hard chrome plating treatment.
[Applications]
· Ideal for maintenance and assembly of devices using imperial-size bolts, such as vehicles from outside Japan, motorcycles, and other imported machinery.
| Standard Price: | MYR 500.08 |
|---|---|
| Days to Ship: | 9 Day(s) |

TONE
L-type wrench ideal for tightening and loosening hex socket bolts and hex socket set screws.
[Features]
· A hexagonal bar L-type wrench that boasts smooth operability and powerful tightening.
[Applications]
· Ideal for assembly and maintenance work of industrial machinery.
| Standard Price: | MYR 63.08- |
|---|---|
| Days to Ship: | 9 Day(s) or more |
| Standard Price: | MYR 88.98- |
|---|---|
| Days to Ship: | 9 Day(s) |

Hex wrench (taper head, extra long) 79 mm to 224 mm
EIGHT TOOL
Sizes are colored to be easily distinguishable and baked coating is luxurious and unlikely to peel off. 2.5-10 mm also come with a silk print size indication. Durability and wear resistance are further improved so that the Taper Head® can be used for final tightening. The torsional strength is 10% to 20% higher than the conventional ball point, and especially effective when used at an inclination (0 to 20°).
| Standard Price: | MYR 40.62- |
|---|---|
| Days to Ship: | 8 Day(s) or more |

Allen wrench (Tapered Head®, super long) (boot machined)
EIGHT TOOL
Easy to identify size with coloring of boots. Even if the wrench is broken, the boot prevents the scattering of fragments.
| Standard Price: | MYR 41.70- |
|---|---|
| Days to Ship: | 8 Day(s) or more |

Hex Key (With Holes on Both Ends) Hex Tamper-Proof, 001-8H
EIGHT TOOL
Wrench with double-ended holes supporting tamper-proof screws. It is designed for professionals so as to exceed ISO and JIS standards.
| Standard Price: | MYR 47.15- |
|---|---|
| Days to Ship: | 8 Day(s) or more |

SUEKAGE TOOL
Swivel bit socket construction allows work angle to be changed. Ideal for rapid turning work. Supports 2 sizes with 1 unit.
| Standard Price: | MYR 71.92- |
|---|---|
| Days to Ship: | 5 Day(s) or more |

Stainless Steel Ball Point Hex Wrench (Standard Type)
TRUSCO NAKAYAMA
A ballpoint L type wrench made of stainless steel and featuring outstanding corrosion resistance, chemical resistance, and shock resistance. A ballpoint type that can be used at an approximately 25° slant.
| Standard Price: | MYR 33.05- |
|---|---|
| Days to Ship: | 2 Day(s) or more |

Stainless Steel Ball Point Hex Wrench (Standard Type)【9 Pieces Per Package】
TRUSCO NAKAYAMA
A ballpoint L type wrench made of stainless steel and featuring outstanding corrosion resistance, chemical resistance, and shock resistance. A ballpoint type that can be used at an approximately 25° slant. Holder can be rotated to enable each differently sized wrench to be taken out and put back easily.
| Standard Price: | MYR 278.12 |
|---|---|
| Days to Ship: | 1 Day(s) |

Stainless Steel Ball Point Hex Wrench (Long Type)
TRUSCO NAKAYAMA
A long ballpoint L type wrench made of stainless steel and featuring outstanding corrosion resistance, chemical resistance, and shock resistance. For tightening and loosening hex socket bolts and screws.
| Standard Price: | MYR 50.07- |
|---|---|
| Days to Ship: | 5 Day(s) or more |

Stainless Steel Ball Point Hex Wrench (Long Type)【9 Pieces Per Package】
TRUSCO NAKAYAMA
A long ballpoint L type wrench made of stainless steel and featuring outstanding corrosion resistance, chemical resistance, and shock resistance. A ballpoint type that can be used at an approximately 25° slant. Holder can be rotated to enable each differently sized wrench to be taken out and put back easily.
| Standard Price: | MYR 354.31 |
|---|---|
| Days to Ship: | 5 Day(s) or more |

Ballpoint Hexagonal Bar Wrench (Inch Size)
TRUSCO NAKAYAMA
Machined with a ball point, it can be used tilted by approximately 25°, speeding up temporary tightening of bolts, and increasing workability. Black oxide treated. Made from chrome vanadium steel.
| Standard Price: | MYR 13.43- |
|---|---|
| Days to Ship: | 5 Day(s) or more |

Ballpoint Hexagonal Bar Wrench (Inch Size)【1-9 Pieces Per Package】
TRUSCO NAKAYAMA
Machined with a ball point, it can be used tilted by approximately 25°, speeding up temporary tightening of bolts, and increasing workability. Black oxide treated. Made from chrome vanadium steel. Holder can be rotated to enable each differently sized wrench to be taken out and put back easily.
| Standard Price: | MYR 141.68- |
|---|---|
| Days to Ship: | 1 Day(s) |

T-Shaped Handle Ball-Point Hex Wrench
TRUSCO NAKAYAMA
T handle type 2-point fastening type. The ball point part can be tilted to one corner at angle of 25° and the tool shows its strength when working in confined areas which are normally out of reach. Hardness is HRC 55 to 60. Made from chrome vanadium steel.
| Standard Price: | MYR 465.89 |
|---|---|
| Days to Ship: | 9 Day(s) |

TRUSCO NAKAYAMA
Compared to the standard product, it features outstanding high torque, durability, and abrasion resistance. Engages hex sockets securely and ensures the tightening of screws. Matte chrome plating.
| Standard Price: | MYR 14.44- |
|---|---|
| Days to Ship: | 9 Day(s) |

TRUSCO NAKAYAMA
Mini-size miniscule wrench. The surface features a black oxide finish. Made from chrome vanadium steel.
| Standard Price: | MYR 6.03- |
|---|---|
| Days to Ship: | 1 Day(s) or more |

Trusco Nakayama L-shaped hex wrench (Inch Size)
TRUSCO NAKAYAMA
Both ends are chamfered which makes it easy to insert into hex sockets. Stable quality is provided by excellent heat treatment. The surface features a black oxide finish. Made from chrome vanadium steel.
| Standard Price: | MYR 10.75- |
|---|---|
| Days to Ship: | 8 Day(s) or more |

Hex wrench (inch size) - L-shape
TRUSCO NAKAYAMA
Both ends are chamfered which makes it easy to insert into hex sockets. Stable quality is provided by excellent heat treatment. The surface features a black oxide finish. Made from chrome vanadium steel. Holder can be rotated to enable each differently sized wrench to be taken out and put back easily.
| Standard Price: | MYR 133.97- |
|---|---|
| Days to Ship: | 9 Day(s) |
| Standard Price: | MYR 454.32 |
|---|---|
| Days to Ship: | 5 Day(s) or more |

Ballpoint Hex Bar Wrench (Short Neck Type)
WERA
Wera's proprietary Hex-Plus surface contact structure contributes to a long life for screws while avoiding damage to the inner part of hex screw holes. Enhance your work efficiency with the high torque capability of this tool. The neck dimensions are very short and it is convenient for work in narrow spaces.
| Standard Price: | MYR 17.45- |
|---|---|
| Days to Ship: | 8 Day(s) or more |

Ballpoint Hexagonal Bar Wrench (Inch Size)
WERA
Wera's proprietary Hex-Plus surface contact structure contributes to a long life for screws while avoiding damage to the inner part of hex screw holes. Enhance your work efficiency with the high torque capability of this tool.
| Standard Price: | MYR 21.83- |
|---|---|
| Days to Ship: | 8 Day(s) or more |

Ballpoint Hexagonal Bar Wrench Set with Black Oxide Finish 【16 Pieces Per Package】
TRUSCO NAKAYAMA
[Features]
· This product has black oxide surface processing.
· The hardness is HRC 52-56.
| Standard Price: | MYR 674.96 |
|---|---|
| Days to Ship: | 9 Day(s) |

Square Bent Ball-Pointed Hex Wrench Set
TRUSCO NAKAYAMA
[Features]
· It is a hexagonal bar wrench rotated by 30° with consideration for ease of use.
· The special processing technology provides high durability and abrasion resistance.
· Final tightening can also be performed with the ball point part.
| Standard Price: | MYR 380.02 |
|---|---|
| Days to Ship: | 9 Day(s) |

Square Bent Ball-Pointed Hex Wrench
TRUSCO NAKAYAMA
[Features]
· It is a hexagonal bar wrench rotated by 30° with consideration for ease of use.
· The special processing technology provides high durability and abrasion resistance.
· Final tightening can also be performed with the ball point part.
| Standard Price: | MYR 32.54- |
|---|---|
| Days to Ship: | 9 Day(s) |

Hex wrench set (pouch type)【16 Pieces Per Package】
TRUSCO NAKAYAMA
Hex wrench set with black finish.
[Features]
·Hardness: HRC52-56.
·Quantity per packet: 16 pieces.
| Standard Price: | MYR 584.71 |
|---|---|
| Days to Ship: | 9 Day(s) |

PB SWISS TOOLS
[Features]
· Tightening is possible at 3 places on the tip.
· 3 places on the tip are all the same size.
· Length adjustment is easy and can be used in various places.
· Useful for applying high torque.
| Standard Price: | MYR 214.00- |
|---|---|
| Days to Ship: | 5 Day(s) or more |

PB SWISS TOOLS
[Features]
· The T-shaped handle specification makes gripping and applying force easier.
· Fits in the palm and reduces fatigue.
| Standard Price: | MYR 116.11- |
|---|---|
| Days to Ship: | 10 Day(s) |

Half-Ball Hex Wrench Set (Semi-Long)
TRUSCO NAKAYAMA
[Features]
· The tip of the short side has undergone half ball point processing. The approach to the hex sockets is easier than the conventional product as a half ball is used.
· Half ball finish allows achievement of easy insertion and the same level of torque transferability.
· The screw can be turned from a maximum slope degree of 32°.
· It utilizes high-quality special alloy chrome vanadium steel (SNCM20V).
· In order to ensure homogeneous and highly accurate tempering (heat treatment) hardness (HRC 60° ±1°), a continuous furnace was intentionally not used, while a sealed-quench furnace / non-oxidizing, decarburizing correction quenching method has been adopted.
· The surface processing of special chrome plating exerts excellent wear resistance and prevents rust over a long period of time.
· Final tightening can be performed with a ballpoint wrench by using the pipe handle.
· Partial painting is done so that the size can be distinguished at a glance based on color.
| Standard Price: | MYR 422.09 |
|---|---|
| Days to Ship: | 9 Day(s) |

Half-Ball Hex Wrench (Semi-Long) Pipe Handle
TRUSCO NAKAYAMA
[Features]
· A pipe handle for hex bar wrench.
· To be used by inserting into a hex bar to complement the rotating force.
· Final tightening can be performed with the ball point part.
| Standard Price: | MYR 66.40 |
|---|---|
| Days to Ship: | 5 Day(s) or more |

Half-Ball Hex Wrench (Semi-Long)
TRUSCO NAKAYAMA
[Features]
· The tip of the short side has undergone half ball point processing. The approach to the hex sockets is easier than the conventional product as a half ball is used.
· Half ball finish allows achievement of easy insertion and the same level of torque transferability.
· The screw can be turned from a maximum slope degree of 32°.
· It utilizes high-quality special alloy chrome vanadium steel (SNCM20V).
· In order to ensure homogeneous and highly accurate tempering (heat treatment) hardness (HRC 60° ±1°), a continuous furnace was intentionally not used, while a sealed-quench furnace / non-oxidizing, decarburizing correction quenching method has been adopted.
· The surface processing of special chrome plating exerts excellent wear resistance and prevents rust over a long period of time.
· Final tightening can be performed with a ballpoint wrench by using the pipe handle.
· Partial painting is done so that the size can be distinguished at a glance based on color.
| Standard Price: | MYR 32.12- |
|---|---|
| Days to Ship: | 9 Day(s) |

Long Ball Point Hex Wrench Set
ASAHIKINZOKU
[Features]
· Since the tip planar angle of the hexagonal bar is chamfered evenly on each side, it is easy to insert it into hexagon sockets.
· Screws can be rotated from angles up to a maximum of 25° with the ballpoint tip, making work easy and quick even in narrow places.
· Hardness: HRC 54-59
[Applications]
· Tightening and loosening work for hex socket bolts and hex socket set screws.
| Standard Price: | MYR 245.89- |
|---|---|
| Days to Ship: | 5 Day(s) or more |
| Standard Price: | MYR 235.31 |
|---|---|
| Days to Ship: | 8 Day(s) |
| Standard Price: | MYR 269.58 |
|---|---|
| Days to Ship: | 5 Day(s) |
| Standard Price: | MYR 56.53- |
|---|---|
| Days to Ship: | 5 Day(s) or more |

Stainless Steel Ballpoint Hex Wrench (Inch-Size)
WERA
[Features]
· Wera's proprietary Hex-Plus surface contact structure contributes to a long life for screws while avoiding damage to the inner part of hex screw holes.
· Made of stainless steel (X46 Cr13).
· Enhance your work efficiency with the high torque capability of this tool.
| Standard Price: | MYR 42.38- |
|---|---|
| Days to Ship: | 8 Day(s) or more |

Wera Hex-Plus Hexagonal Bar Wrench Set (Alternate)
WERA
[Features]
· Wera's proprietary Hex-Plus surface contact structure contributes to a long life for screws while avoiding damage to the inner part of hex screw holes.
· Enhance your work efficiency with the high torque capability of this tool.
| Standard Price: | MYR 109.56 |
|---|---|
| Days to Ship: | 8 Day(s) |

WERA
[Features]
· Wera's proprietary Hex-Plus surface contact structure contributes to a long life for screws while avoiding damage to the inner part of hex screw holes.
· Enhance your work efficiency with the high torque capability of this tool.
| Standard Price: | MYR 4.35- |
|---|---|
| Days to Ship: | 8 Day(s) or more |

WERA
[Features]
· Wera's proprietary Hex-Plus surface contact structure contributes to a long life for screws while avoiding damage to the inner part of hex screw holes.
· Enhance your work efficiency with the high torque capability of this tool.
| Standard Price: | MYR 15.07- |
|---|---|
| Days to Ship: | 8 Day(s) |

WERA
[Features]
· Wera's proprietary Hex-Plus surface contact structure contributes to a long life for screws while avoiding damage to the inner part of hex screw holes.
· It is chrome plated.
· Enhance your work efficiency with the high torque capability of this tool.
| Standard Price: | MYR 8.28- |
|---|---|
| Days to Ship: | 8 Day(s) or more |

HexPro Pivot Head Wrench Set (Inch Size)
BONDHUS
A wrench that can be used for continuous tightening of bolts without ever having to reset the wrench. Simply change the angle of the head and go.
[Features]
· The head angle can be adjusted over 180 degrees, allowing you to continuously tighten without ever having to reset the wrench, even in tight spaces.
· Particularly effective in places where there are objects in the way, making it necessary to reset the wrench in order to tighten a bolt.
· You don't have to keep resetting the wrench on the screw, so there is no concern about the wrench or screw slipping.
· The wrench can also be used straight up and down just like a screwdriver.
· Features a special matte chrome finish on the surface, helping prevent corrosion.
[Applications]
· Used for tightening bolts in tight spaces and for bicycle, car and motorcycle maintenance.
· Ideal for situations where it is difficult to tighten bolts properly with a regular wrench because there are many objects in the way.
| Standard Price: | MYR 398.89 |
|---|---|
| Days to Ship: | 8 Day(s) |

ASAHIKINZOKU
[Features]
· The product is magnetic, which allows it to be attached to a machine, tool box or the like to prevent the loss of hex wrenches, screws, etc.
[Applications]
· For management of hex wrench and screws.
| Standard Price: | MYR 183.90 |
|---|---|
| Days to Ship: | 9 Day(s) |

ASAHIKINZOKU
[Features]
· Connecting holders used for hexagonal bar wrenches which can be combined together freely.
· Holders come with protrusions and grooves, and multiple holders can be linked to each other in various shapes.
· Hex wrenches of various types and sizes can be combined to make your very own set.
· Holders can be connected together.
| Standard Price: | MYR 84.28 |
|---|---|
| Days to Ship: | 9 Day(s) |

ASAHIKINZOKU
[Features]
· Connecting holders used for hexagonal bar wrenches which can be combined together freely.
· Holders come with protrusions and grooves, and multiple holders can be linked to each other in various shapes.
· Hex wrenches of various types and sizes can be combined to make your very own set.
· Holders can be connected together.
| Standard Price: | MYR 17.66- |
|---|---|
| Days to Ship: | 8 Day(s) or more |
| Brand |
|---|
| Product Series |
| Days to Ship |
| Width across flat dimension(mm) |
| Width across flat dimension(Inch) |
| Tip Type |
| Type |
| Single Product/Set Classification |
| Overall length (L dimension)(mm) |
| Hex bar wrench underneck length (H dimension) L-shape only(mm) |
| Brand | TONE | TONE | TONE | TONE | BONDHUS | EIGHT TOOL | EIGHT TOOL | EIGHT TOOL | SUEKAGE TOOL | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | WERA | WERA | WERA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | PB SWISS TOOLS | PB SWISS TOOLS | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | ASAHIKINZOKU | WERA | WERA | WERA | WERA | WERA | WERA | WERA | WERA | BONDHUS | ASAHIKINZOKU | ASAHIKINZOKU | ASAHIKINZOKU |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Product Series | Stainless Steel Ball Point Hex Wrench (Standard Type)【9 Pieces Per Package】 | Stainless Steel Ball Point Hex Wrench (Long Type)【9 Pieces Per Package】 | Ballpoint Hexagonal Bar Wrench (Inch Size)【1-9 Pieces Per Package】 | Ballpoint Hexagonal Bar Wrench Set with Black Oxide Finish 【16 Pieces Per Package】 | |||||||||||||||||||||||||||||||||||||||||
| Days to Ship | 9 Day(s) | 9 Day(s) or more | 9 Day(s) | 9 Day(s) or more | 9 Day(s) | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 5 Day(s) or more | 2 Day(s) or more | 1 Day(s) | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 1 Day(s) | 9 Day(s) | 9 Day(s) | 1 Day(s) or more | 8 Day(s) or more | 9 Day(s) | 5 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 5 Day(s) or more | 10 Day(s) | 9 Day(s) | 5 Day(s) or more | 9 Day(s) | 5 Day(s) or more | 8 Day(s) | 5 Day(s) | 5 Day(s) or more | 8 Day(s) or more | 8 Day(s) | 8 Day(s) or more | 8 Day(s) | 8 Day(s) or more | 8 Day(s) | 9 Day(s) | 9 Day(s) | 8 Day(s) or more |
| Width across flat dimension(mm) | - | - | - | 17 ~ 36 | 8 | 1.5 ~ 10 | 1.5 ~ 10 | 2 ~ 5 | 3×4 ~ 12×14 | 1.5 ~ 10 | 1.5 ~ 10 | 1.5 ~ 10 | 1.5 ~ 10 | - | - | 2 ~ 10 | 1.5 ~ 14 | 0.71 ~ 4 | - | - | 1.5 ~ 10 | 1.5 ~ 10 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Width across flat dimension(Inch) | 1/4 ~ 5/64 | 1/4 ~ 7/32 | 1/4 ~ 5/64 | - | 5/32 | - | - | - | - | - | - | - | - | 0.05 ~ 9/64 | 0.05 ~ 9/64 | - | - | - | 0.05 ~ 9/64 | 0.05 ~ 9/64 | - | - | 0.05 ~ 9/64 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Tip Type | Ballpoint | Ballpoint | Ballpoint | Standard Type | Standard Type | Ballpoint | Ballpoint | Hex Tamper Proof | Standard Type | Ballpoint | Ballpoint | Ballpoint | Ballpoint | Ballpoint | Ballpoint | Ballpoint | Standard Type | Standard Type | Standard Type | Standard Type | Ballpoint | Ballpoint | Ballpoint | Ballpoint | Ballpoint | Ballpoint | Standard Type | - | - | Ballpoint | Ballpoint | Ballpoint | Ballpoint | Ballpoint | Ballpoint | Ballpoint | Ballpoint | Standard Type | Standard Type | Standard Type | Standard Type | Ballpoint | - | - | - |
| Type | Hex L-shape wrench | Hex L-shape wrench | Hex L-shape wrench | Hex L-shape wrench | Hex L-shape wrench | Hex L-shape wrench | Hex L-shape wrench | Hex L-shape wrench | Other | Hex L-shape wrench | Hex L-shape wrench | Hex L-shape wrench | Hex L-shape wrench | Hex L-shape wrench | Hex L-shape wrench | T Type | Hex L-shape wrench | Hex L-shape wrench | Hex L-shape wrench | Hex L-shape wrench | Hex L-shape wrench | Hex L-shape wrench | Hex L-shape wrench | Hex L-shape wrench | Hex L-shape wrench | Hex L-shape wrench | Hex L-shape wrench | - | - | Hex L-shape wrench | Hex L-shape wrench | Hex L-shape wrench | Hex L-shape wrench | Hex L-shape wrench | Hex L-shape wrench | Hex L-shape wrench | Hex L-shape wrench | Hex L-shape wrench | Hex L-shape wrench | Hex L-shape wrench | Hex L-shape wrench | Hex L-shape wrench | Related Item | Related Item | Related Item |
| Single Product/Set Classification | Set Product | Single Item | Set Product | Single Item | Single Item | Single Item | Single Item / Set Product | Single Item | Single Item / Set Product | Single Item | Set Product | Single Item | Set Product | Single Item | Set Product | Set Product | Single Item | Single Item / Set Product | Single Item | Set Product | Set Product | Single Item / Set Product | Single Item / Set Product | Set Product | Set Product | Single Item | Set Product | - | - | Set Product | Single Item | Single Item | Set Product | Set Product | Set Product | Single Item | Single Item / Set Product | Set Product | Single Item | Single Item / Set Product | Single Item / Set Product | Set Product | Single Item | Set Product | Single Item |
| Overall length (L dimension)(mm) | - | 90 ~ 224 | - | 160 ~ 355 | 106 ~ 160 | 79 ~ 224 | 91 ~ 291 | 58 ~ 80 | 250 ~ 275 | 77 ~ 170 | - | 90 ~ 224 | - | 72 ~ 170 | - | - | 77 ~ 230 | 35 ~ 41 | 72 ~ 170 | - | - | 90 ~ 219 | 83 ~ 224 | - | - | 81 ~ 235 | - | 125 ~ 330 | 187 ~ 245 | - | 190 | 81.5 ~ 183 | - | - | - | 112 ~ 235.4 | 112 ~ 224 | - | 45 ~ 125 | 90 ~ 250 | 45 ~ 224 | - | - | - | 37 |
| Hex bar wrench underneck length (H dimension) L-shape only(mm) | - | 4 ~ 18 | - | 63 ~ 140 | 31 ~ 48 | 16 ~ 40 | 16 ~ 40 | 12 ~ 28 | - | 14 ~ 40 | - | 14 ~ 40 | - | 12 ~ 35 | - | - | 14 ~ 56 | 8 ~ 12 | 12 ~ 35 | - | - | 4.5 ~ 22 | 14 ~ 40 | - | - | 15 ~ 38 | - | - | - | - | - | 14 ~ 41 | - | - | - | 22.3 ~ 54.4 | 19 ~ 42 | - | 14 ~ 45 | 14 ~ 45 | 14 ~ 90 | - | - | - | - |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy