(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Files（Single Product Set Product：Single Item）
| Days to Ship |
|
|---|
-
MISUMI
High sharpness of diamond abrasive grains lasts until the end of the product life. Recommended for cost-sensitive customers. [C-Value]
Example of representative model number "DTYLL"Standard Price: MYR 128.57- Days to Ship: 4 Day(s) or more -
TRUSCO NAKAYAMA
[Features]
· Ideal for grinding of hard materials such as carbide alloys, forged steel, ceramics, glass, reinforced plastics and the like.
· The cutting quality of the diamond abrasive grains is sustained until the very end.
· The metal base has elasticity to fit the work material.
· Since it is held firmly by the file base metal in a stable state with originally developed electrodeposition technology, the initial sharpness is maintained until the end.
[Applications]
· Optimal for uses such as finishing grinding for deburring/repairs/ground glass joints.
· Finishing of various molds, modification, corner rounding, grinding of various blades, and grinding of various hard materials.Standard Price: MYR 72.20- Days to Ship: 2 Day(s) or more -
Diamond File S Type (Precision)
TSUBOSAN
Diamond particles are fixed using Ni electrodeposition. Improved adhesion, grinding accuracy and wear resistance, etc.
Standard Price: MYR 70.41- Days to Ship: 4 Day(s) or more -
Diamond File For Precision Use
LOBTEX
[Features]
· Lobtex diamond files have uniformly distributed diamond grains that are firmly and stably fixed on the file base metal, and the sharp, abrasive blade protrudes to the front, allowing the sharp cutting to continue from beginning to end, making the product ideal for grinding hard materials such as superalloys, hardened steel, ceramic, glass, reinforced plastic, etc.Standard Price: MYR 89.48- Days to Ship: 4 Day(s) or more -
Metalworking Files (Triangular / Round / Half-Round / Flat / Square)
TSUBOSAN
Ironwork files by Japan's number one brand "Tsubosan".
Standard Price: MYR 42.06- Days to Ship: 4 Day(s) or more -
TSUBOSAN
These files feature Bright-900 coating that enables them to be used for shaving almost anything.
[Features]
· Reliable products made in Japan.
· To enhance workability, the front and back of the files feature different grain, with the front for rough shaving and the back for finishing.
· The application of hard chromium to the surface provides a high level of durability and excellent shaving dispersion.
· "Extreme"—a new file with a new feel.
· Does not clog easily, making it ideal for workpieces made of aluminum, lead, plastic, etc.
[Applications]
· For those who need rough shaving and finishing abilities all in one tool.Standard Price: MYR 124.47- Days to Ship: 9 Day(s) -
TRUSCO NAKAYAMA
[Features]
· Ideal for grinding of hard materials such as carbide alloys, forged steel, ceramics, glass, reinforced plastics and the like.
· The cutting quality of the diamond abrasive grains is sustained until the very end.
· The metal base has elasticity to fit the work material.
· Since it is held firmly by the file base metal in a stable state with originally developed electrodeposition technology, the initial sharpness is maintained until the end.
[Applications]
· Optimal for deburring and machined items which are rigid or have rough edges.
· Finishing of various molds, modification, corner rounding, grinding of various blades, and grinding of various hard materials.Standard Price: MYR 103.95- Days to Ship: 2 Day(s) or more -
Bright 900, Metalworking File, Flat, Half-Round, Round
TSUBOSAN
[Features]
· An original product that supports everything from soft to hard materials. In particular, there is no clogging on the file, with excellent cutting powder peeling properties and excellent corrosion resistance and durability.
· The filing material has been made viscous and our unique coating technology has been applied to achieve a file with revolutionary surface hardness.
· The endurance has been improved to 3-6 times that of conventional products (differs depending on the work material).
· Superior rust and corrosion resistance prevent deterioration from rust due to high-humidity environments / marine environments and so on.
· Particularly excellent cutting powder release, with almost no clogging of the file, keeping the blade sharp since the chip powder can be removed simply.Standard Price: MYR 109.96- Days to Ship: 4 Day(s) or more -
Electroplated Diamond File, for Precision, Round Type, Overall Length 140 mm / 85 mm, DFS/NF Series
STRAUSS
High-grade diamond file, made in Israel, that uses natural diamonds for its diamond abrasive.
Standard Price: MYR 220.01- Days to Ship: 4 Day(s) or more -
VALLORBE
This is the finest flat file made in Switzerland for processing watch components.
There are 2 types: wide and narrow.Standard Price: MYR 144.96- Days to Ship: 4 Day(s) or more -
FUKUSHIMA FILE
Diamond file made by a long-established specialist file shop. Try out the sharpness.
Standard Price: MYR 100.63 Days to Ship: 6 Day(s) or more -
NORITAKE
[Features]
· A tool for polishing in which diamond abrasive grains are hardened with resin bond.
[Applications]
· Deburring and polishing of metal mold, etc.Standard Price: MYR 391.87- Days to Ship: 4 Day(s) or more -
MISUMI
The file produced by the Swiss maker Vallorbe can be used for work on watches and other precision instruments.
This file is very popular due to its anti-torsion properties and is a favorite among competitors in the World Skills Competition.- Volume Discount
Standard Price: MYR 315.65- Days to Ship: 4 Day(s) or more -
Diamond Electrolytic File Ironworking Model
MISUMI
Diamond electro deposited file for iron works, using Cristone diamonds, which have proven trust and achievements for more than 70 years.
- Volume Discount
Standard Price: MYR 173.34- Days to Ship: 4 Day(s) or more -
Grip Dedicated to Round Handle File AL160
MISUMI
Grip dedicated to round handle files.
Used for DFS, NF, HTS, HTL, HTR and MDT.- Volume Discount
Standard Price: MYR 207.19 Days to Ship: 6 Day(s) or more -
Diamond Electro-deposited Filer for Precision / Circular Pattern Model
MISUMI
Precision diamond electro deposited file using Cristone diamonds, which have proven trust and achievements for more than 70 years.
- Volume Discount
Standard Price: MYR 159.29- Days to Ship: 4 Day(s) or more -
HOZAN
A file made of diamond grain with grain size of #200 attached to its substrate via electrodeposition processing.
[Features]
· For hard material that was previously difficult to handle.
· A file with electrodeposited diamond powder used in the base material.
· With a grip comfortable to hold.
· Capable of deburring and chamfering ceramics, mirrors and glass not accessible to ironwork files.
· Capable of maintenance of tools and the like, setting of machine tools and agricultural equipment and blades touching up and tip repairing.
· Can also be used for grindstone dresser (new face shaping).
[Applications]
· Ideal for filing thermoset blades, machine parts, stainless steel, glass, ceramic materials etc.Standard Price: MYR 125.29- Days to Ship: 1 Day(s) or more -
File Single Item / Set (Up-Cut 45/58)
HOZAN
File set with 5 shapes (circle, semicircle, flat, triangle, square).
[Features]
· The file mesh of K-155-S is 58 and K-155-L is 45.
· Comes with a vinyl case ideal for storage.
· With a grip comfortable to hold.
· Also possible to purchase separately.
· The individually sold type of K-155-S is K-160 series and K-155-L is K-170 series.
[Applications]
· 5 kinds of files can be used appropriately for various applications.Standard Price: MYR 39.33- Days to Ship: 7 Day(s) or more -
Quick Cut File, Metalworking Type
TSUBOSAN
By electrolytically polishing (PAT) the cutting edge of a conventional file, the cutting edge is processed like a sharp blade and the recess is deepened, making it suitable for clog-prone materials such as hardened plastic, Bakelite, wood, light metal, etc.
Standard Price: MYR 67.50- Days to Ship: 11 Day(s) or more -
Diamond File K Type (Assorted Files)【1-5 Pieces Per Package】
TSUBOSAN
[Features]
· Diamond particles are fixed using Ni electrodeposition.
· Improved adhesion, grinding accuracy and wear resistance, etc.
· Can achieve sufficient grinding performance with the lightest touch.
· Wet type grinding is effective; use with a small amount of oil applied.
· Supports electrodeposition lengths from 50 L to 100 L.Standard Price: MYR 85.19- Days to Ship: 4 Day(s) or more -
Diamond Electrodeposition File for Precision Use / Round Handle Type
CRSYTONDIAMOND
Cryston diamond's electrodeposition file for precision use with over 70 years of reliability and proven track record.
Standard Price: MYR 77.82- Days to Ship: 4 Day(s) or more -
Diamond Electrodeposition File Iron Work Type
CRSYTONDIAMOND
Cryston diamond's electrodeposition file for ironwork with over 70 years of reliability and proven track record.
Standard Price: MYR 105.94- Days to Ship: 4 Day(s) or more -
CRSYTONDIAMOND
It has a light touch and can perform shaving without resistance.
Standard Price: MYR 262.41- Days to Ship: 4 Day(s) or more -
TSUBOSAN
[Features]
· Can smoothly cut iron or stainless steel of pre-hardening hardness any number of times. Superb sharpness is achieved with state-of-the-art surface processing technology (electrolytic polishing). Sharpness exceeding the Bright modelStandard Price: MYR 58.69- Days to Ship: 1 Day(s) or more -
GOEI
[Features]
·It is a high-grade product in which diamonds of the appropriate grain size are arranged firmly on the file alloy using our unique electrodeposition technology in the alloy of the shape required for finishing, correction, and rounding of various molds.
·Through strict material management, we provide high-precision, high-strength, and sharp-edged files.
·The product name is printed on the grip of the file, and the grip is color-coded according to the particle size, making it easy to manage and reorder.
[Applications]
·Optimal for grinding hard and brittle materials, such as finishing, correcting, rounding of various molds, grinding of various blades, etc.
·Also suitable for small diameter holes and chamfering.Standard Price: MYR 94.46- Days to Ship: 1 Day(s) or more -
TJM DESIGN
[Features]
· Allows grinding that is 6 or more times faster than sandpaper, with a usage life that is about 100 times or more longer than that of sandpaper.
· Can grind the surfaces in any direction.
· The blade can be replaced easily.
· A tool for grinding wood, aluminum and plastic.
· Excellent workability/durability.
[Applications]
· A grinding sander for wood, aluminum and plastic.Standard Price: MYR 30.13- Days to Ship: 9 Day(s) -
Sander Small Curved Surface Round Hole Replacement Blade
TJM DESIGN
[Features]
· A tool for grinding wood, aluminum and plastic.
· Excellent workability/durability.
· Allows grinding that is 6 or more times faster than sandpaper, with a usage life that is about 100 times or more longer than that of sandpaper.
· Can grind the surfaces in any direction.
· The blade can be replaced easily.
[Applications]
· A grinding sander for wood, aluminum and plastic.Standard Price: MYR 25.55 Days to Ship: 9 Day(s) -
Sander Curved Surface Round Hole Replacement Blade
TJM DESIGN
[Features]
· A tool for grinding wood, aluminum and plastic.
· Excellent workability/durability.
· Allows grinding that is 6 or more times faster than sandpaper, with a usage life that is about 100 times or more longer than that of sandpaper.
· Can grind the surfaces in any direction.
· The blade can be replaced easily.
[Applications]
· A grinding sander for wood, aluminum and plastic.Standard Price: MYR 32.79 Days to Ship: 9 Day(s) -
Sander Plane Partial Finishing Blade
TJM DESIGN
[Features]
· A tool for grinding wood, aluminum and plastic.
· Excellent workability/durability.
· Allows grinding that is 6 or more times faster than sandpaper, with a usage life that is about 100 times or more longer than that of sandpaper.
· Can grind the surfaces in any direction.
· The blade can be replaced easily.
[Applications]
· A grinding sander for wood, aluminum and plastic.Standard Price: MYR 22.17 Days to Ship: 9 Day(s) -
Sander Narrow Plane Fine Working Blade
TJM DESIGN
[Features]
· A tool for grinding wood, aluminum and plastic.
· Excellent workability/durability.
· Allows grinding that is 6 or more times faster than sandpaper, with a usage life that is about 100 times or more longer than that of sandpaper.
· Can grind the surfaces in any direction.
· The blade can be replaced easily.
[Applications]
· A grinding sander for wood, aluminum and plastic.Standard Price: MYR 20.51 Days to Ship: 9 Day(s) -
TJM DESIGN
[Features]
· A tool for grinding wood, aluminum and plastic.
· Excellent workability/durability.
· Allows grinding that is 6 or more times faster than sandpaper, with a usage life that is about 100 times or more longer than that of sandpaper.
· Can grind the surfaces in any direction.
· The blade can be replaced easily.
[Applications]
· A grinding sander for wood, aluminum and plastic.Standard Price: MYR 28.32 Days to Ship: 9 Day(s) -
Sander Wide Narrow Plane Blade
TJM DESIGN
[Features]
· A tool for grinding wood, aluminum and plastic.
· Excellent workability/durability.
· Allows grinding that is 6 or more times faster than sandpaper, with a usage life that is about 100 times or more longer than that of sandpaper.
· Can grind the surfaces in any direction.
· The blade can be replaced easily.
[Applications]
· A grinding sander for wood, aluminum and plastic.Standard Price: MYR 41.49- Days to Ship: 9 Day(s) -
TJM DESIGN
[Features]
· File able to cut ultra-hard gypsum board such as Super Hard.
· Uses a new generation fine ceramic blade with outstanding durability.
· "Shuttle structure"with swinging blades.
· Cuts Tiger Super Hard.
· A level of durability that is 10 times that of rasp files.
· Shuttle structure increases the cut amount by 20%.
[Applications]
· For cutting carbide gypsum board.Standard Price: MYR 212.01- Days to Ship: 9 Day(s) -
TJM DESIGN
[Features]
· Structure expels cutting dust backward, reducing clogging.
· TETRABLADE that cuts when pushed or pulled reduces workload.
· Elastomer grip prevents slippage and enables comfortable work.
· Increases work efficiency by approximately 30% when compared to conventional rasp files.
· The unique file shape makes clogging unlikely.
· Lightweight, fatigue-reducing design.
[Applications]
· For surface cutting of gypsum board, and calcium silicate board. (Roughing part: Plate thickness up to 21 mm supported)Standard Price: MYR 166.65- Days to Ship: 9 Day(s) -
TJM DESIGN
[Features]
· Uses a newly developed tetra blade to enable continuous cutting with no clogging.
· The two-way blade enables polishing on both push and pull strokes, increasing work efficiency by approximately 30% when compared to conventional rasp files.
· Equipped with a stainless steel fin.
[Applications]
· For surface cutting of gypsum board, and calcium silicate board.Standard Price: MYR 144.33 Days to Ship: 9 Day(s) -
TJM DESIGN
[Features]
·This is a new type of tool that can easily and quickly perform troublesome grinding work such as intermediate finishing of sheet metal, rough cutting of gypsum board, plastic and wood, chamfering, metal rust removal, and paint stripping.
·Unlike conventional knives, it is highly safe and can be used easily by anyone.
·The blade is made of high-quality steel that has undergone super-hard quenching and has been treated with a rust-preventing Parker treatment, so it can withstand long-term use.
[Applications]
·Tools for grinding sheet metal, gypsum board, plastic, and wood.Standard Price: MYR 73.32 Days to Ship: 9 Day(s) -
Arakan Standard Replacement Blade
TJM DESIGN
[Features]
· A new and unprecedented type of tool that enables labor-intensive grinding work to be easily and quickly carried out, such as intermediate finishing of sheet metal, roughing of plasterboard, plastic and wood, chamfering, removing rust from metal, stripping paint, etc.
· Unlike the conventional blades, it is safer and easier to use.
· The blade is made by super-hard quenching of high-quality steel, followed by Parkerizing to provide an rust-proofing effect, which makes it resilient to use over long periods.
[Applications]
· Tool for grinding sheet metal, plasterboard, plastic and wood.Standard Price: MYR 44.97- Days to Ship: 9 Day(s) -
TJM DESIGN
[Features]
· A new and unprecedented type of tool that enables labor-intensive grinding work to be easily and quickly carried out, such as intermediate finishing of sheet metal, roughing of plasterboard, plastic and wood, chamfering, removing rust from metal, stripping paint, etc.
· Unlike the conventional blades, it is safer and easier to use.
· The blade is made by super-hard quenching of high-quality steel, followed by Parkerizing to provide an rust-proofing effect, which makes it resilient to use over long periods.
[Applications]
· Tool for grinding sheet metal, plasterboard, plastic and wood.Standard Price: MYR 53.93 Days to Ship: 9 Day(s) -
Arakan Pocket Replacement Blade
TJM DESIGN
[Features]
· A new and unprecedented type of tool that enables labor-intensive grinding work to be easily and quickly carried out, such as intermediate finishing of sheet metal, roughing of plasterboard, plastic and wood, chamfering, removing rust from metal, stripping paint, etc.
· Unlike the conventional blades, it is safer and easier to use.
· The blade is made by super-hard quenching of high-quality steel, followed by Parkerizing to provide an rust-proofing effect, which makes it resilient to use over long periods.
[Applications]
· Tool for grinding sheet metal, plasterboard, plastic and wood.Standard Price: MYR 34.80 Days to Ship: 9 Day(s) -
Arakan Stick Replacement Blade
TJM DESIGN
[Features]
· A new and unprecedented type of tool that enables labor-intensive grinding work to be easily and quickly carried out, such as intermediate finishing of sheet metal, roughing of plasterboard, plastic and wood, chamfering, removing rust from metal, stripping paint, etc.
· Unlike the conventional blades, it is safer and easier to use.
· The blade is made by super-hard quenching of high-quality steel, followed by Parkerizing to provide an rust-proofing effect, which makes it resilient to use over long periods.
[Applications]
· Tool for grinding sheet metal, plasterboard, plastic and wood.Standard Price: MYR 38.55 Days to Ship: 9 Day(s) -
TRUSCO NAKAYAMA
[Features]
· The product has slightly rougher specifications than ordinary products and provides superior grinding force.
· Cut shape is set to single cut.
· The product features a high degree of hardness and is capable of machining hard steel materials as well.
[Applications]
· Correction of saw blade fitting.
· Processing of steel materials.
· Processing of glass, etc.Standard Price: MYR 54.39- Days to Ship: 5 Day(s) or more -
TRUSCO NAKAYAMA
[Features]
· A dedicated file for chainsaws.
· This employs a soft grip which is gentle on the hands.
· Swiss-made file material ensures excellent grinding power.
[Applications]
· Resetting of chain saw blade.Standard Price: MYR 31.23- Days to Ship: 5 Day(s) or more -
File for Metalworking Semi-Round / Round
TRUSCO NAKAYAMA
[Features]
· Set teeth are sharp and highly durable. Teeth are also set on a side (only one side). A JIS standard compliant product.Standard Price: MYR 50.21- Days to Ship: 1 Day(s) or more -
File for Metalworking Square / Triangular
TRUSCO NAKAYAMA
[Features]
· Set teeth are sharp and highly durable. Teeth are set on the entire surface. A JIS standard compliant product.Standard Price: MYR 61.88- Days to Ship: 5 Day(s) or more -
Ironworking File, File Handle Standard Type
TRUSCO NAKAYAMA
[Features]
· A file handle which is easy to get used to and resists slipping.
[Applications]
· Suitable ironwork files.Standard Price: MYR 17.23- Days to Ship: 1 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Type |
| Overall Length(mm) |
| Product Type |
| Roughness of grain |
| Particle Size(#) |
| Nominal Dimensions |
| Nominal Size |
| Single Product Set Product |
| Roughness of grain (precision file) |
| Electrodeposition segment length(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | TRUSCO NAKAYAMA | TSUBOSAN | LOBTEX | TSUBOSAN | TSUBOSAN | TRUSCO NAKAYAMA | TSUBOSAN | STRAUSS | VALLORBE | FUKUSHIMA FILE | NORITAKE | MISUMI | MISUMI | MISUMI | MISUMI | HOZAN | HOZAN | TSUBOSAN | TSUBOSAN | CRSYTONDIAMOND | CRSYTONDIAMOND | CRSYTONDIAMOND | TSUBOSAN | GOEI | TJM DESIGN | TJM DESIGN | TJM DESIGN | TJM DESIGN | TJM DESIGN | TJM DESIGN | TJM DESIGN | TJM DESIGN | TJM DESIGN | TJM DESIGN | TJM DESIGN | TJM DESIGN | TJM DESIGN | TJM DESIGN | TJM DESIGN | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA |
| Product Series | Metalworking Files (Triangular / Round / Half-Round / Flat / Square) | Electroplated Diamond File, for Precision, Round Type, Overall Length 140 mm / 85 mm, DFS/NF Series | Diamond Electro-deposited Filer for Precision / Circular Pattern Model | Diamond File K Type (Assorted Files)【1-5 Pieces Per Package】 | Diamond Electrodeposition File for Precision Use / Round Handle Type | ||||||||||||||||||||||||||||||||||||||||
| Days to Ship | 4 Day(s) or more | 2 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 9 Day(s) | 2 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 1 Day(s) or more | 7 Day(s) or more | 11 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 1 Day(s) or more | 1 Day(s) or more | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 5 Day(s) or more | 5 Day(s) or more | 1 Day(s) or more | 5 Day(s) or more | 1 Day(s) or more |
| Type | Diamond Electrodeposition File | Diamond Electrodeposition File | Diamond Electrodeposition File | Diamond Electrodeposition File | ironworking files | Assorted files | Diamond Electrodeposition File | ironworking files | Diamond Electrodeposition File | Precise File | Diamond Electrodeposition File | Hand Stone/Rapper | Precise File | Diamond Electrodeposition File | Other Related Products | Diamond Electrodeposition File | Diamond Electrodeposition File | Assorted files | ironworking files | Diamond Electrodeposition File | Diamond Electrodeposition File | Diamond Electrodeposition File | Hand Stone/Rapper | Assorted files | Diamond Electrodeposition File | Hand Stone/Rapper | Hand Stone/Rapper | Hand Stone/Rapper | Hand Stone/Rapper | Hand Stone/Rapper | Hand Stone/Rapper | Hand Stone/Rapper | Other Related Products | Other Related Products | Other Related Products | Other Related Products | Other Related Products | Other Related Products | Other Related Products | Other Related Products | Other Related Products | Other Related Products | ironworking files | ironworking files | ironworking files |
| Overall Length(mm) | 215 | 140 ～ 200 | 140 ～ 200 | 140 ～ 200 | 190 ～ 490 | 215 ～ 235 | 170 ～ 215 | 190 ～ 310 | 85 ～ 140 | - | 140 | - | - | 170 ～ 230 | - | 140 ～ 180 | 170 | 185 ～ 215 | 190 ～ 310 | 170 ～ 215 | 140 ～ 200 | 170 ～ 230 | 140 | 215 ～ 235 | 170 ～ 200 | 56 ～ 180 | 80 | 80 | 55 | 80 | 150 | 150 | 151 ～ 180 | 180 ～ 270 | 148 | - | - | - | - | - | 105 ～ 195 | 220 ～ 250 | 190 ～ 430 | 190 ～ 430 | 90 ～ 150 |
| Product Type | - | - | Needle Type | Needle Type | - | - | Ironwork Type | - | Needle Type | - | Needle Type | - | - | Ironwork Type | - | Needle Type | - | - | - | Needle Type | Needle Type | Ironwork Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Roughness of grain | - | - | - | - | Fine / Second cut / Coarse / Dead-smooth | Coarse/Fine / Second cut: Dead smooth / Single Coarse / Single Medium | - | Fine / Second cut | - | - | - | - | - | - | - | - | - | Upper teeth 45 / Upper teeth 58 | Fine / Second cut | - | - | - | - | Coarse/Fine / Second cut: Dead smooth / Single Coarse / Single Medium | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Second cut | Second cut | Fine / Second cut / Coarse / Dead-smooth | Fine / Second cut / Coarse / Dead-smooth | - |
| Particle Size(#) | 100 | 170 | 200 ～ 600 | 140 ～ 170 | - | - | 140 | - | 100 ～ 200 | - | 170 | 1,000 ～ 800 | - | 200 | - | 200 | 200 | - | - | 150 ～ 200 | 200 | 200 | 1,000 ～ 600 | - | 140 ～ 325 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Nominal Dimensions | - | - | - | - | 150 mm ～ 400 mm | - | - | 150 mm ～ 250 mm | - | - | - | - | - | - | - | - | - | - | 150 mm ～ 250 mm | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Nominal Size | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 5 pcs./set / 8 pcs./set / 12 pcs./set | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Single Product Set Product | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item |
| Roughness of grain (precision file) | - | - | - | - | - | - | - | - | - | #000 / #00 / #0 / #1 / #2 / #3 / #4 / #5 / #6 | - | - | #000 / #00 / #0 / #1 | - | - | - | - | - | - | - | - | - | #0 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Electrodeposition segment length(mm) | - | - | - | 40 ～ 70 | - | - | - | - | - | - | - | 40 | - | - | - | - | - | - | - | - | 40 ～ 70 | 50 ～ 80 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Type
- ironworking files
- Assorted files
- Precise File
- Diamond Electrodeposition File
- Soldering Iron File
- Hand Stone/Rapper
- Other Related Products
- File
-
Overall Length(mm)
-
Product Type
- Needle Type
- Ironwork Type
- Soldering Type
- Taper Type
-
Roughness of grain
- Fine
- Second cut
- Coarse
- Dead-smooth
- Upper teeth 45
- Upper teeth 58
- Not applicable
- Coarse/Fine
- Second cut: Dead smooth
- Single Coarse / Single Medium
- Tri-cut
- Precision
-
Particle Size(#)
- WA-3000
- WA-1000
- WA-2,000
- 1,000
- 1,000 (finish sharpening)
- 1,000 (medium finishing surface)
- 1,200
- 1,500
- 2,000
- 4,000
- 5,000
- 6,000
- 8,000
- 46
- 60
- 80
- 100
- 120
- 140
- 150
- 150 (rough sharpening surface)
- 170
- 180
- 200
- 220
- 220 (230)
- 240
- 270
- 300
- 300 equivalent
- 320
- 320 (325)
- 325
- 400
- 400 (rough sharpening surface)
- 400 (rough sharpening)
- 600
- 600 (medium finishing surface)
- 800
-
Nominal Dimensions
-
Nominal Size
- 5 pcs./set
- 8 pcs./set
- 10 pcs./set
- 12 pcs./set
-
Single Product Set Product
-
Roughness of grain (precision file)
- #000
- #00
- #0
- #1
- #2
- #3
- #4
- #5
- #6
-
Electrodeposition segment length(mm)
Narrow search by specifying Manufacturer
-
- TRUSCO NAKAYAMA (18)
- TJM DESIGN (15)
- TSUBOSAN (8)
- CRSYTONDIAMOND (3)
- ENGINEER (2)
- FUKUSHIMA FILE (2)
- HOZAN (2)
- LOBTEX (2)
- NAGOYADIAMOND (2)
- VALLORBE (2)
- AS ONE (1)
- GOEI (1)
- NORITAKE (1)
- PB SWISS TOOLS (1)
- STRAUSS (1)
- TSUBOMAN (1)
- NAKANISHI (0)
- VICTORY (0)
- BAHCO (0)
- TSUBOMIYA (0)
- ITOOLS (0)
- YAMATO SEITOSYO (0)
- H & H (0)
- PFERD (0)
- TOKYO AUTOMACH (0)
- HIROSHIMA FILES (0)
- MINITOR (0)
- NT CUTTER (0)
- SUMFLEX (0)
- SK 11 (0)
- ESCO (0)
CAD
-
- 2D
- 3D
Related Categories to Files
-
- DIA/CBN Grinding Stones
- Grinding Stones for Flat Surfaces
- Grinding Stone Dressers
- Offset/Flexible Grinding Stones
- Disks
- Sheet Polishing Materials
- Belt Polishing Materials
- Grinding Stones with Shafts
- DIA/CBN Bars
- Ultra-Hard Bars
- Wheels with Shafts
- Brushes with Shafts
- Cup Brushes
- Hand Brushes
- Stick Grinding Stones
- Files
- Deburring Tools
- Polishing Materials / Pastes
- Polishing Materials for Grinders
-
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy