(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Wheels with Shafts（Application：Polishing）
| Days to Ship |
|
|---|
-
Flap Wheel【5 Pieces Per Package】
ICHIGUCHI
Uses a polishing cloth with alumina abrasive. Worn abrasive material is promptly ejected, enabling an even finish every time. As it has high adaptability to workpieces, it can be used anywhere, even flat, curved and irregular surfaces. Suitable for deburring, removing rust and removing scratches from iron and nonferrous metal as well as for grinding and polishing the inside and openings of pipes.
Standard Price: MYR 164.02- Days to Ship: 4 Day(s) or more -
YANASE
Prevents overcutting of the workpiece and fits better to rounded surfaces.
[Features]
· Fits snugly due to the mushroom shape.
· Heat dissipation effects are achieved by making an overlapping layer of Unilon non-woven fabric of the same size.
· Further, since the Unilon fibers are compressed closer to the head, the strength is higher than the lower part.
· Tangled Unilon fibers act as a cushion, preventing over-grinding of the materials being abraded.
· Fits better to rounded surfaces.Standard Price: MYR 313.09- Days to Ship: 8 Day(s) or more -
Cone paper L/Z【50 Pieces Per Package】
ICHIGUCHI
[Features]
· The size is long, so compared to conventional cone paper, the work efficiency has been improved.
· A soft, dedicated holder that is easy to hold and can be used to perform smooth polishing work.
· Polishing cloth is processed in a conical shape for performance of plane polishing without bringing the workpiece and tool horizontal.
· Extremely convenient when the work environment is not free.Standard Price: MYR 292.46- Days to Ship: 4 Day(s) or more -
Flap Wheel With Shaft UF【1-10 Pieces Per Package】
YANASE
High-quality standard products that come in a vast variety of sizes and grain sizes.
[Features]
· A wide range of sizes and particle sizes with high quality.
· Because of the slight gap between polishing cloths, it is unlikely to clog and can be used for uniform polishing throughout.
· It is elastic, so that it fits nicely onto the workpiece for close polishing.
· It is not exothermic and does not alter the polished material.
· Fits well to workpiece.
· Boasts significant autogenous action.Standard Price: MYR 29.10- Days to Ship: 4 Day(s) or more -
NANO-FLAP (Sandpaper) With Shank Diameter 3 mm【1-5 Pieces Per Package】
YANASE
There is no clogging due to the ultra-thin mesh structure, allowing for uniform processing.
[Features]
· High grade precision work.
· Nano-flap is a flap made with flexible sandpaper using ultra fine mesh base fabric.
· There is little clogging due to the ultra-thin mesh structure, allowing for uniform processing and a long service life.Standard Price: MYR 84.70- Days to Ship: 4 Day(s) or more -
Mounted Type New Soft Lap【14 Pieces Per Package】
UHT
An abrasive with abrasive grains kneaded into nonwoven fabric. There is no need to apply abrasive as there is with buffs. In addition, as the density is not as high as buffs, it supports high-speed rotation. Moreover, it is recommended for polishing workpieces without damaging them, such as in paint peeling and rust removal.
Standard Price: MYR 143.28 Days to Ship: 9 Day(s) or more -
Flap Wheel (Shaft Diameter: 6 mm)【5 Pieces Per Package】
TRUSCO NAKAYAMA
[Features]
· For ordinary metals. As the space between the polishing cloths is somewhat open, it causes less clogging and can be used until the end.
· It can be used to polish anything including inner surface, curved surface and flat surface.
· Only the side can be used. As it has a shaft, it can be used flexibly, and the direction of the hairline is constant.
· Fits well onto the shape of the workpiece to be processed.
· Autogenous action enables continuous grinding with new abrasive surfaces constantly formed.
· It has a high heat dissipation effect to prevent distortion of the workpiece.
[Applications]
· Commercially available electric grinder, electric drill, drilling machine, etc.
· Deburring, rust removal, pre-coat polishing, inner-surface and curved-surface polishing, polishing of metal surface.
· Tool used: straight grinder. (Pneumatic/Electric)Standard Price: MYR 119.55- Days to Ship: 5 Day(s) or more -
"Felt Shafted Wheel" (Shaft Diameter: 6 mm)【5 Pieces Per Package】
TRUSCO NAKAYAMA
[Features]
· It can be used with stainless steel and general metals.
· Felt wheels for the final finish with the use of oil and grease abrasive according to applications.
[Applications]
· Glazing and wiping work on mirror finish.
· Tool used: straight grinder. (air + electric)Standard Price: MYR 261.48 Days to Ship: 5 Day(s) or more -
MINITOR
[Features]
· The soft type felt buff has been impregnated with abrasive (chromium oxide) for finishing.
· Immediate polishing is possible without abrasive application.
[Applications]
· Applicable Materials: Tool Steel, Alloy Steel, General Steel, Stainless Steel, Aluminum, CopperStandard Price: MYR 156.28- Days to Ship: 9 Day(s) or more -
Super diamond flap (shaft diameter: 6 mm)
ICHIGUCHI
[Features]
· Diamond sheets are formed into a flap wheel.
· Provides gentle contact unavailable in conventional diamond grinding stones.
· Also, the air cooling effect operates to enable dry use.
[Applications]
· Grinding and polishing ceramics, carbide, stone and difficult-to-cut materialStandard Price: MYR 153.93- Days to Ship: 5 Day(s) or more -
Ceramic Tip for Finishing【10 Pieces Per Package】
MISUMI
The resin-bonded grindstone with a WAS shaft conditions the work surface gently, making it ideal for polishing.
- Volume Discount
Standard Price: MYR 122.39 Days to Ship: 2 Day(s) -
MISUMI
Closely fits the shape of the work material.
Self-regenerating property means polishing with new abrasive surface at all times.
Low thermal transfer prevents distortion and chipping of the workpiece due to heat.- Volume Discount
Standard Price: MYR 167.14 Days to Ship: 6 Day(s) or more -
MISUMI
Abrasive paper on flap expands due to centrifugal force when rotated, so it fits shape of workpiece and can also be used for polishing inner surface of hole and flap and versatile rail are single-action replacement.
Days to Ship: 7 Day(s) or more -
Wheel Set with Felt Shaft, Shaft Diameter: 3 mm 【12 Pieces Per Package】
MISUMI
[Features]
·A set of popular shapes and sizes of soft felt buffsStandard Price: MYR 142.75 Days to Ship: 4 Day(s) or more -
MISUMI
Since unilon fiber is specially coated with abrasive material, the intertwined unilon fiber plays the role of a cushion and prevents excessive shaving. It does not cause clogging and provides a constant finished surface until the end of product life. [C-Value]
Standard Price: MYR 48.75 Days to Ship: 4 Day(s) or more -
AC Drum【1-10 Pieces Per Package】
ICHIGUCHI
[Features]
· Uses tube-shaped paper with a dedicated rubber holder.
· Available in abundant sizes, with smooth touch.
· Because it is made of rubber, there are no concerns about it carving into the workpiece.Standard Price: MYR 122.99- Days to Ship: 4 Day(s) or more -
Skoo Light Wheel S【5 Pieces Per Package】
ICHIGUCHI
Suitable for work on both flat surfaces and irregularly shaped surfaces. S (standard item) uses only non-woven fabric.
[Features]
· Nonwoven fabric abrasive material has been processed into a wheel shape.
· Suitable for polishing surfaces, curves and interiors.
· Made of nonwoven fabric abrasive material only, for a light finish with a soft touch.Standard Price: MYR 215.39- Days to Ship: 4 Day(s) or more -
Polyethylene Foil T【10 Pieces Per Package】
ICHIGUCHI
The structure is layered to adapt to uneven surfaces. Available from 10 mm in diameter, which is ideal for detailed polishing. One laminated sheet is called 1P.
[Features]
· Utilizes a special nonwoven fabric abrasive material.
· It produces glossier finish as compared to the Sco-Light.
· The structure is layered to adapt to uneven surfaces.
· Poli Light Wheel T from 10 mm to 30 mm diameters are available, which are ideal for detailed polishingStandard Price: MYR 309.09- Days to Ship: 4 Day(s) or more -
YANASE
A product which can polish both bottom and side surfaces at the same time.
[Features]
· The tip (bottom) can also be used for added convenience.
· Polishing cloth extends further than the shaft so the bottom and sides can be used for 2 surface simultaneous polishing.
· Unlikely to clog, allowing a uniform finish to be achieved throughout.
· It is elastic, easy to fit to the workpiece.
· Due to heat dissipation, it does not alter the polished material.
· Excellent autogenous properties.
· Ideal for polishing flat surfaces, bottom surfaces and cornersStandard Price: MYR 36.52- Days to Ship: 8 Day(s) or more -
YANASE
[Features]
· Flap wheel that is easy to use and does not scratch the workpiece easily, since both sides are cap-less and metal fittings are not used.
· Tough abrasive cloth is used to achieve both grinding power and durability.
· The paper is flexible and resilient, for a tight fit with the workpiece when grinding.
· Deburring of metals and rust-removal.
· For general metal surface grinding, such as flat surfaces, curved surfaces and inner surfaces.
· Suitable for grinding in narrow parts that are difficult to reach with the tips of the flaps.Standard Price: MYR 26.80- Days to Ship: 9 Day(s) or more -
AC Band【50 Pieces Per Package】
ICHIGUCHI
[Features]
· Uses tube-shaped paper with a dedicated rubber holder.
· Available in abundant sizes, with smooth touch.
· Performs the partial repair of molds and grinding/polishing of fine parts accurately without waste.Standard Price: MYR 142.36- Days to Ship: 4 Day(s) or more -
Cup Foil【5 Pieces Per Package】
ICHIGUCHI
Makes working with the head surface of flap wheels possible. Grinding and polishing on the bottom of the L-shaped or concave parts, which was difficult with conventional wheels, can be performed efficiently. Uses an alumina abrasive to support all kinds of work.
Standard Price: MYR 254.18- Days to Ship: 5 Day(s) or more -
SKO Light Foil M【5 Pieces Per Package】
ICHIGUCHI
Nonwoven fabric abrasive material has been processed into a wheel shape. Suitable for work on both flat surfaces and irregularly shaped surfaces. M (mixed item) is a nonwoven fabric abrasive material mixed with polishing cloth. M (mixed item) has higher grinding power than S (standard item), and it is less likely to scorch. Also, the hairline pattern provided by moving the M type straight in one direction is very popular.
Standard Price: MYR 251.68- Days to Ship: 4 Day(s) or more -
SKO Light Foil T【5-10 Pieces Per Package】
ICHIGUCHI
One laminated sheet is called 1P.
[Features]
· The structure is layered to adapt to uneven surfaces.
· Available from 10 mm in diameter, which is ideal for detailed polishing.Standard Price: MYR 215.42- Days to Ship: 4 Day(s) or more -
Slit Wheel【5 Pieces Per Package】
ICHIGUCHI
The flap wheel vanes are cut to increase the outstanding ability to adapt to workpieces. In areas with overlapping steep curves, thread ridges, and multiple grooves, each and every workpiece is carefully polished. Suitable for grinding irregularly shaped pipes. Uses an alumina abrasive.
Standard Price: MYR 257.30 Days to Ship: 4 Day(s) or more -
Mounted Wheel With Unilon (Hard) NH【1-10 Pieces Per Package】
YANASE
Ideal for removal of scratches and rust. Can also be used for hairline finishing.
[Features]
· Selectable from abundant granularity and sizes.
· It removes burrs without scraping, with no secondary burrs.
· As it is soft, elastic and has good adaptability, it prevents fatigue.Standard Price: MYR 26.48- Days to Ship: 8 Day(s) or more -
ICHIGUCHI
Polishing cloth is processed in a conical shape for performance of plane polishing without bringing the workpiece and tool horizontal. Extremely convenient when the work environment is not free.
[Features]
· The size is long, so compared to conventional cone paper, the work efficiency has been improved.
· Soft, dedicated holder that is easy to hold and can be used to perform smooth polishing workStandard Price: MYR 13.03- Days to Ship: 4 Day(s) or more -
Polyethylene Foil【5 Pieces Per Package】
ICHIGUCHI
[Features]
· Special non-woven fabric abrasive material reduces deposition on the workpiece.
· Ideal for removing the nap of wood, scratch blurring on metal curved surfaces and in metal cylinders, glazing and polishing, adjusting the surface roughness before painting or laminating and removing scratches from metal.
· Poli Light Wheels from 30 mm to 100 mm in diameter are availableStandard Price: MYR 253.59- Days to Ship: 4 Day(s) or more -
Micro Flap【10 Pieces Per Package】
ICHIGUCHI
[Features]
· A standard flexible polishing wheel with shaft (diameter 10 to 25 mm).
· The small flap wheel has been carefully crafted.
· No core run-out even under high-speed rotation, for smooth working of fine gaps.
· It is ideal for work such as detailed modification of machine parts, partial repair of molds, cleaning inner surface of small diameter pipes and deburring grooves.
· Uses an alumina abrasive.Standard Price: MYR 269.55- Days to Ship: 4 Day(s) or more -
YANASE
Prevents over-scraping, and produces a uniform finished surface with no clogging.
[Features]
· Unilon's standard product.
· Because the Unilon fibers are specially coated with abrasive, the intertwined fibers play the role of cushioning and prevent excessive grinding.
· Its autogenous properties prevent clogging.
· Polishes without scratching.
· Finishes the surface without scraping the material.
· Flexible and fits perfectly to the curved surfaces.Standard Price: MYR 54.15- Days to Ship: 8 Day(s) or more -
Super Diamond Band【5 Pieces Per Package】
ICHIGUCHI
[Features]
· Diamond product that can be used dry.
· Product commercialized by replacing polishing cloth with diamond sheet.
· Features excellent sharpness and a beautiful finish.
· Super Diamond (all-diamond): Boasts sharp grinding power and high durabilityStandard Price: MYR 382.38 Days to Ship: 5 Day(s) or more -
Diamond Band【10 Pieces Per Package】
ICHIGUCHI
The diamond abrasive is affixed to a base material by using glue. It is flexible, so it can be processed with small tools. For waste-free polishing of detailed parts of difficult-to-cut materials
[Features]
· Diamond product that can be used dry.
· Made of resin bond diamond.
· Features a smooth touch.
· Use according to the applicationStandard Price: MYR 191.42- Days to Ship: 6 Day(s) or more -
ICHIGUCHI
The diamond abrasive is affixed to a base material by using glue. It is flexible, so it can be processed with small tools. Suitable for work with materials that are difficult-to-cut or have irregular surfaces.
[Features]
· Diamond product that can be used dry.
· Made of resin bond diamond.
Features a smooth touch.
· Use according to the applicationStandard Price: MYR 99.80- Days to Ship: 5 Day(s) or more -
Super diamond flap Shaft diameter 3 mm
ICHIGUCHI
Sharp cutting edge and diamond sheet abrasive with superb hardness are machined into a tip tool. Characteristics include strong grinding ability, excellent durability and a gentle touch. Allows for work as intended without chipping hard and brittle workpieces. Both a disc type and a flap type with shaft are available. Both wet and dry types can be used for the Super Diamond series.
[Features]
· Diamond product that can be used dry.
· Product commercialized by replacing polishing cloth with diamond sheet.
· Features excellent sharpness and a beautiful finish.
· Super Diamond (all-diamond): Boasts sharp grinding power and high durabilityStandard Price: MYR 129.60- Days to Ship: 5 Day(s) or more -
YANASE
Use alundum for general polishing and zirconia for heavy polishing such as bead polishing, etc. after welding.
Standard Price: MYR 5.60- Days to Ship: 4 Day(s) or more -
YANASE
Since the holder part is a sponge, the contact is soft, and prevents excessive grinding.
[Features]
· Attachment when using a cushioning cone.
· Superb elasticity with the dedicated sponge.Standard Price: MYR 65.74 Days to Ship: 34 Day(s) -
Toppo With Single-Action Shaft, for Polishing【1-10 Pieces Per Package】
YANASE
[Features]
· This is the product you always wanted.
· The centrifugal force caused by rotation increases the diameter, making it ideal for inner surface polishing.
· Capable of heavy polishing with a soft touch.
· It is a retractable type, providing a large polishing area and beautiful finished surface.
· One-touch shaft attachmentStandard Price: MYR 13.50- Days to Ship: 5 Day(s) or more -
NEW_REGISTON
Optimal for irregular shape polishing, with polishing of the front surfaces only without scraping the foundations.
Standard Price: MYR 69.93 Days to Ship: 11 Day(s) or more -
Flaps with Shaft (No Metal Fittings, Shaft Diameter 3 mm)
MURAKO
[Features]
· The main feature is that the flapper wheel has no vertical bracket, so there is no part that may hit and damage the workpiece.
· Can be used for any type of polishing, including inner, curved and flat surfaces.
· Strong thermal dissipation effect ensuring minimal burning of workpieces.
· Autogenous action enables continuous grinding with new abrasive surfaces constantly formed and obtains stable polishing power.
· Fits the shape of the workpiece well.
[Applications]
· Grinding and polishing of iron and stainless steel.
· Pre-painting polishing.
· Scratch removal.
· Polishes the inside of pipes.
· For rust removal.
· Deburring.
· Surface polishing.
· Scorch removal after welding.
· Electric grinder, electric drill, drilling machine, etc.
· Tool used: straight grinder. (Air/Electric)Standard Price: MYR 30.62- Days to Ship: 5 Day(s) or more -
Flap With Shaft (Without Bracket, Shaft, Diameter 6 mm): Polishing
MURAKO
[Features]
· The main feature is that the flapper wheel has no vertical bracket, so there is no part that may hit and damage the workpiece.
· Can be used for any type of polishing, including inner, curved and flat surfaces.
· Strong thermal dissipation effect ensuring minimal burning of workpieces.
· Autogenous action enables continuous grinding with new abrasive surfaces constantly formed and obtains stable polishing power.
· Fits the shape of the workpiece well.
[Applications]
· Grinding and polishing of iron and stainless steel.
· Pre-painting polishing.
· Scratch removal.
· Polishes the inside of pipes.
· For rust removal.
· Deburring.
· Surface polishing.
· Scorch removal after welding.
· Tool used: straight grinder. (Air/Electric)
· Electric grinder, electric drill, drilling machine, etc.Standard Price: MYR 36.38- Days to Ship: 5 Day(s) or more -
MURAKO
[Features]
· The main feature is that the flapper wheel has no vertical bracket, so there is no part that may hit and damage the workpiece.
· Can be used for any type of polishing, including inner, curved and flat surfaces.
· Strong thermal dissipation effect ensuring minimal burning of workpieces.
· Autogenous action enables continuous grinding with new abrasive surfaces constantly formed and obtains stable polishing power.
· Fits the shape of the workpiece well.
[Applications]
· Grinding and polishing of iron and stainless steel.
· Pre-painting polishing.
· Scratch removal.
· Polishes the inside of pipes.
· For rust removal.
· Deburring.
· Surface polishing.
· Scorch removal after welding.
· Electric grinder, electric drill, drilling machine, etc.
· Tool used: straight grinder. (Air/Electric)Standard Price: MYR 30.62- Days to Ship: 5 Day(s) or more -
Slitted Felt Wheel with Shaft (Shaft Diameter: 6 mm)
MURAKO
[Features]
· A felt flap type that greatly increases the efficiency of using grease abrasives (green rouge, etc.).
· It has excellent flexibility and can fit to the shape of the workpiece, realizing even polish and beautiful shine.
· Can be used for any type of finish polishing, including inner, curved and flat surfaces.
[Applications]
· For finishing and wiping.
· Add abrasive for mirror metal finish.Standard Price: MYR 66.30- Days to Ship: 5 Day(s) or more -
"Sponge Sander" (Shaft Diameter: 3 mm)【3 Pieces Per Package】
NAKANISHI
[Features]
· A sander that uses heavy duty polyester fibers.
· Having outstanding flexibility, it softly polishes flat and curved surfaces alone without scratching.
· Multiporous with almost no clogging. Reduces heat generation on surfaces being treated.
· Heavy duty fibers retain abrasive particles for excellent durability.
[Applications]
· For micro deburring of metal products.
· For repairing rust and scratches as well as light polishing.
· Polishing of stainless steel, copper, brass, aluminum, etc.Standard Price: MYR 178.39- Days to Ship: 8 Day(s) -
"Laminated Soft Buff" (Shaft Diameter 3 mm)【5-10 Pieces Per Package】
NAKANISHI
[Features]
· A soft buff that can be fixed to various raw materials with a small diameter flange.
· Final finishing, polishing, dirt removal, etc. can all be done to a gentle finish with the use of a polishing agent.
[Applications]
· Various metals / non-ferrous metals / precious metals / ceramic / glass and other materials can be finished.Standard Price: MYR 208.48- Days to Ship: 5 Day(s) or more -
"Felt Buff" (Shaft Diameter: 3 mm)【10 Pieces Per Package】
NAKANISHI
[Features]
· Durability is significantly enhanced by the compression and high density of the high-quality wool (100%).
· Uniformly crimped wool greatly increases the permeability of the abrasive, achieving stable finishing.
[Applications]
· Various metals / non-ferrous metals / precious metals / ceramic / glass and other materials can be finished.Standard Price: MYR 149.60- Days to Ship: 5 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Material |
| Type |
| Application |
| Particle Size(#) |
| Outer Diameter(mm) |
| Shaft Diameter(mm) |
| Width(mm) |
| Stationary Diameter(mm) |
| Screw Hole Diameter(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | ICHIGUCHI | YANASE | ICHIGUCHI | YANASE | YANASE | UHT | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | MINITOR | ICHIGUCHI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | ICHIGUCHI | ICHIGUCHI | ICHIGUCHI | YANASE | YANASE | ICHIGUCHI | ICHIGUCHI | ICHIGUCHI | ICHIGUCHI | ICHIGUCHI | YANASE | ICHIGUCHI | ICHIGUCHI | ICHIGUCHI | YANASE | ICHIGUCHI | ICHIGUCHI | ICHIGUCHI | ICHIGUCHI | YANASE | YANASE | YANASE | NEW_REGISTON | MURAKO | MURAKO | MURAKO | MURAKO | NAKANISHI | NAKANISHI | NAKANISHI |
| Product Series | NANO-FLAP (Sandpaper) With Shank Diameter 3 mm【1-5 Pieces Per Package】 | "Felt Shafted Wheel" (Shaft Diameter: 6 mm)【5 Pieces Per Package】 | Wheel Set with Felt Shaft, Shaft Diameter: 3 mm 【12 Pieces Per Package】 | Mounted Wheel With Unilon (Hard) NH【1-10 Pieces Per Package】 | Toppo With Single-Action Shaft, for Polishing【1-10 Pieces Per Package】 | Flap With Shaft (Without Bracket, Shaft, Diameter 6 mm): Polishing | "Sponge Sander" (Shaft Diameter: 3 mm)【3 Pieces Per Package】 | "Laminated Soft Buff" (Shaft Diameter 3 mm)【5-10 Pieces Per Package】 | |||||||||||||||||||||||||||||||||||||
| Days to Ship | 4 Day(s) or more | 8 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 9 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 9 Day(s) or more | 5 Day(s) or more | 2 Day(s) | 6 Day(s) or more | 7 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 8 Day(s) or more | 9 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 8 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 8 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 34 Day(s) | 5 Day(s) or more | 11 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 8 Day(s) | 5 Day(s) or more | 5 Day(s) or more |
| Material | - | - | - | - | - | - | - | Felt | Felt | - | - | - | - | Felt | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Felt | - | Buff | Buff |
| Type | Flap with shaft | Flap with shaft | Paper | Flap with shaft | Flap with shaft | - | Flap with shaft | Flap with shaft | - | Flap with shaft | Flap with shaft | Flap with shaft | Flap with shaft | - | Flap with shaft | Band | Flap with shaft | Flap with shaft | Flap with shaft | Flap with shaft | Band | Flap with shaft | Flap with shaft | Flap with shaft | Flap with shaft | Flap with shaft | Paper | Flap with shaft | Flap with shaft | Flap with shaft | Band | Band | Flap with shaft | Flap with shaft | Paper | Holder | Flap with shaft | Flap with shaft | Flap with shaft | Flap with shaft | Flap with shaft | Flap with shaft | Flap with shaft | Flap with shaft | Drum |
| Application | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing |
| Particle Size(#) | 40 ～ 600 | 150 ～ 600 | 60 ～ 120 | 40 ～ 600 | 800 ～ 3000 | 120 ～ 1500 | 40 ～ 400 | - | - | 180 ～ 400 | 80 | 400 | 60 ～ 120 | - | 320 | - | 60 ～ 400 | 60 ～ 1000 | 40 ～ 400 | 60 ～ 240 | 40 ～ 600 | 60 ～ 600 | 60 ～ 400 | 60 ～ 400 | 80 ～ 600 | 120 ～ 1500 | 100 ～ 240 | 60 ～ 1000 | 60 ～ 600 | 120 ～ 600 | 400 | 200 ～ 1000 | 200 ～ 400 | 800 ～ 3000 | 60 ～ 400 | - | 60 ～ 240 | 80 | 40 ～ 400 | 40 ～ 400 | 40 ～ 400 | - | 120 ～ 400 | - | - |
| Outer Diameter(mm) | 25 ～ 100 | 50 ～ 90 | - | 10 ～ 30 | 10 ～ 20 | - | 25 ～ 100 | 50 | 12 ～ 20 | 15 ～ 50 | 10 | 15 | 10 ～ 50 | 6,8,10,12 | 50 | 3 ～ 75 | 30 ～ 100 | 10 ～ 30 | 10 ～ 60 | 25 ～ 80 | - | 30 ～ 60 | 30 ～ 100 | 10 ～ 80 | 40 ～ 50 | 10 ～ 25 | - | 30 ～ 100 | 10 ～ 25 | 50 ～ 100 | - | - | 10 ～ 20 | 15 ～ 30 | - | Tip diameter ø14; Large end diameter φ20 | 10 ～ 50 | 80 | 25 ～ 30 | 50 ～ 80 | 25 ～ 40 | 20 ～ 50 | 20 ～ 30 | 25 ～ 30 | 4 ～ 22 |
| Shaft Diameter(mm) | 3 ～ 6 | 6 | - | 3 | 3 | 3 | 6 | 6 | 2.34 ～ 6 | 6 | 3 | 3 | - | 3 | 6 | 3 ～ 6 | 6 | 3 | 3 ～ 6 | 6 | - | 6 | 6 | 3 ～ 6 | 6 | 3 ～ 6 | - | 6 | 3 | 6 | - | - | 3 | 3 | - | 6 | - | 6 | 3 | 6 | 6 | 6 | 3 | 3 | 3 |
| Width(mm) | 5 ～ 30 | 30 ～ 50 | 40 ～ 50 | 5 ～ 20 | 10 | - | 10 ～ 30 | 12 | 20 ～ 25 | 10 ～ 20 | 20 | 10 | 10 ～ 25 | 15,18,20 | 25 | 10 ～ 30 | 25 | - | 20 ～ 40 | 25 | 10 ～ 30 | 25 ～ 40 | 25 | - | 25 | 5 ～ 25 | 40 ～ 60 | 25 | 5 ～ 20 | 25 | 10 | 10 ～ 20 | 10 | 10 | - | 50 | 10 ～ 25 | 25 | 5 | 5 ～ 25 | 20 ～ 25 | 20 | 10 | 6 ～ 14 | 5 ～ 20 |
| Stationary Diameter(mm) | - | - | - | - | - | - | - | - | - | - | - | - | 10 ～ 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Screw Hole Diameter(mm) | - | - | - | - | - | - | - | - | - | - | - | - | M3 ～ M6 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 3 ～ 6 | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Material
- Cotton
- Sisal
- Flannel
- Buff
- Felt
-
Type
- Flap with shaft
- Band
- Drum
- Paper
- Holder
- Holder (Drum)
-
Application
- Polishing
- Polishing
-
Particle Size(#)
-
Outer Diameter(mm)
-
Shaft Diameter(mm)
-
Width(mm)
-
Stationary Diameter(mm)
-
Screw Hole Diameter(mm)
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Related Categories to Wheels with Shafts
-
- DIA/CBN Grinding Stones
- Grinding Stones for Flat Surfaces
- Grinding Stone Dressers
- Offset/Flexible Grinding Stones
- Disks
- Sheet Polishing Materials
- Belt Polishing Materials
- Grinding Stones with Shafts
- DIA/CBN Bars
- Ultra-Hard Bars
- Wheels with Shafts
- Brushes with Shafts
- Cup Brushes
- Hand Brushes
- Stick Grinding Stones
- Files
- Deburring Tools
- Polishing Materials / Pastes
- Polishing Materials for Grinders
-
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy