(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Lathe Jigs（Page2）
| Days to Ship |
|
|---|
-
TRUSCO NAKAYAMA
[Features]
· S45C steel, which can be easily recut and features a suitable hardness, is used. Also, precise processing is performed with attention to lowering of the restoration accuracy (center runout) after reattachment and cause of attachment distortion of the master jaw.Standard Price: MYR 425.36- Days to Ship: 10 Day(s) -
TRUSCO NAKAYAMA
[Features]
· S45C steel, which can be easily recut and features a suitable hardness, is used. Also, precise processing is performed with attention to lowering of the restoration accuracy (center runout) after reattachment and cause of attachment distortion of the master jaw.Standard Price: MYR 264.10- Days to Ship: 10 Day(s) -
FUTAMURAKIKI
[Features]
· The product is designed by focusing on the super high speed rotation (7000 min-1) and high accuracy (TIR 0.003).
· Carbide insert is attached on the tip part to withstand abrasion and friction due to super high speed rotation. (A type)
· By using the combined angular bearing (3 places) and two types of bearings of needle bearings inside this product, it is finely designed and assembled to withstand rigidity.
· The use of a unique labyrinth mechanism (non-contact) as a measure to prevent immersion when cutting oil is used eliminates wear, friction, and power loss, reduces the temperature rise of the machine, and improves accuracy and reliability of lifespan.Standard Price: MYR 4,972.86- Days to Ship: 11 Day(s) or more -
FUTAMURAKIKI
[Features]
· Angular bearing, thrust bearing and needle roller bearing are used for smooth rotation torque.
· Suitable for screw cutting and edge surface processing, as A, C and E-type are fine type.
· The labyrinth mechanism (non-contact) is adopted for the immersion prevention measures when cutting oil is used.Standard Price: MYR 2,941.63- Days to Ship: 7 Day(s) or more -
FUTAMURAKIKI
[Features]
· Since the processing heat generated by the elongation of the workpiece is absorbed by the flat spring built into the center, there is no distortion of a workpiece and its finishing accuracy improves.
· The thrust load generated by the elongation of the workpiece is also absorbed to the slide mechanism, and it is designed not to apply load to the bearing directly.Standard Price: MYR 2,619.55- Days to Ship: 7 Day(s) or more -
FUTAMURAKIKI
[Features]
· Small accessory cutting adequate products, -17A is a fine type and suitable for thread cutting and end surface processing.
· 2 needle bearings and 3 thrust bearings are used inside this product, and the main body diameter is designed to be small.
· As the head part of the main body is within 60 degrees from the center end tip, there is no interference for progress of the tool bit.Standard Price: MYR 984.07- Days to Ship: 7 Day(s) or more -
FUTAMURAKIKI
Large bearings have been adopted and the main unit O.D. and center shaft diameter have been made thicker in order to withstand larger loads than a standard type
Standard Price: MYR 5,042.75- Days to Ship: 11 Day(s) or more -
Rolling Center RST With Carbide
FUTAMURAKIKI
[Features]
· External appearance, shape and structure are the same with RST type, but carbide alloy chip is low-attached to the tip part of the center.
· As the carbide alloy insert is attached on the tip, it has superior anti-abrasion and anti-corrosion performance.Standard Price: MYR 1,986.02- Days to Ship: 7 Day(s) or more -
FUTAMURAKIKI
[Features]
· Center runout (maximum) against M.T. is TIR 0.01.
· Hydraulic mechanism is adopted to the claw operation and the edge surface is maintained evenly by independent operation of the claw.
· The claw and the center shaft are made of high-speed steel to achieve high durability.Standard Price: MYR 5,983.93- Days to Ship: 7 Day(s) or more -
Work Driving Center, HD-Type Replacing Claw
FUTAMURAKIKI
When the claw of the work driving center is worn and damaged, promptly replace the claw before using.
Standard Price: MYR 744.79- Days to Ship: 11 Day(s) or more -
Umbrella Type Rotation Center BRC
FUTAMURAKIKI
[Features]
· Used for lathes and cylindrical grinding machines.
· Used for center pushing tool of pipe type, ring type and thin processed items.
· Inside this product, 3 types, each one of taper roller bearing, thrust bearing and ball bearing, are prepared.Standard Price: MYR 2,123.52- Days to Ship: 7 Day(s) or more -
Carbide Lathe Center TC Series
TAKURA KOGU
[Features]
· With carbide tip, used with lathes to eliminate runout in machined productsStandard Price: MYR 246.28- Days to Ship: 5 Day(s) or more -
TAKURA KOGU
[Features]
· With carbide tip, used with lathes to eliminate runout in machined productsStandard Price: MYR 596.77- Days to Ship: 7 Day(s) or more -
Bull Nose Rolling Center LCU Series
TAKURA KOGU
[Features]
· The diameter of the shank base was increased and can be removed using the forcing nut equipped on the tailstockStandard Price: MYR 890.50- Days to Ship: 7 Day(s) or more -
TAKURA KOGU
[Features]
· With carbide tip, used with lathes to eliminate runout in machined productsStandard Price: MYR 820.40- Days to Ship: 7 Day(s) or more -
Standard Price: MYR 2,841.11- Days to Ship: 9 Day(s) or more -
NSK lathe jig rotation center LC-A type
NSK
[Features]
· Since the run-out of center spindle tapered part is 5 µm or less, tapered roller bearings, thrust ball bearings, and needle bearings have been used.
[Applications]
· Workpiece support and runout prevention.Standard Price: MYR 1,969.70- Days to Ship: 5 Day(s) or more -
NSK
[Features]
· A buffering structure that absorbs the thermal expansion of the workpiece has been adopted, using various needle roller bearings and thrust ball bearings.
[Applications]
· Workpiece support and runout prevention.Standard Price: MYR 1,834.01- Days to Ship: 5 Day(s) or more -
NSK
[Features]
· Size doesn't change much from dead center and uses various types of needle roller bearings for the rotating center cap.
[Applications]
· Workpiece support and runout prevention.Standard Price: MYR 1,681.25- Days to Ship: 5 Day(s) or more -
TRUSCO NAKAYAMA
[Features]
· It is all pure steel.
[Applications]
· Prevents runout of workpiece.Standard Price: MYR 162.14- Days to Ship: 5 Day(s) or more -
TRUSCO NAKAYAMA
[Features]
·It has a carbide tip.
·Prevents workpiece vibration.
·Materials: Carbon steel for machine structure (S45C)Standard Price: MYR 278.70- Days to Ship: 5 Day(s) or more -
Lathe Center (Long Type, with Extra-Hard Tip)
TRUSCO NAKAYAMA
[Features]
· By making the lathe center longer, the distance between the workpiece and tailstock became wider, improving the work efficiency.
[Applications]
· Prevents runout of workpiece.Standard Price: MYR 1,060.10- Days to Ship: 5 Day(s) or more -
"Half Center" (with Carbide Tip)
TRUSCO NAKAYAMA
[Features]
· The tip of the lathe center has been cut so as not to touch the workpiece.
[Applications]
· Prevents center deflection.Standard Price: MYR 1,267.78- Days to Ship: 5 Day(s) or more -
3-Jaw Scroll Chuck (Integrated Jaw Type/Thin)
KOBAYASHITEKKO
The main body is lightweight and thin and reduces interference with the cutting tool. Drill presses, index heads, milling machines, etc.
Standard Price: MYR 5,685.73- Days to Ship: 10 Day(s) or more -
3-Jaw Scroll Chuck (Split Jaw Type/Thin)
KOBAYASHITEKKO
The main body is lightweight and thin and reduces interference with the cutting tool. Drill presses, index heads, milling machines, etc.
Standard Price: MYR 21,099.01 Days to Ship: 10 Day(s) -
3-Jaw Scroll Chuck (Split Jaw Type/Center Runout Adjustment)
KOBAYASHITEKKO
Runout can be easily corrected. Indexing tables, lathes, grinding machines, etc.
Standard Price: MYR 5,989.76- Days to Ship: 10 Day(s) or more -
TEIKOKU_CHUCK
This collet is compatible with the short series of draw bar models and between-center models.
· Has an accurate plane pair.
· Even if the positions of the arbor and collet change, it will not be affected.
· Additional polishing is possible when deviating from the holding range.Standard Price: MYR 2,419.77- Days to Ship: 8 Day(s) or more -
SC Type 6-Jaw Scroll Chuck Integrated Jaw (With Internal Jaw / External Jaw) Ordinary Type
KOBAYASHITEKKO
[Features]
· 6-Jaw Scroll Chuck
· Integrated jaw type with internal jaw and external jaw
· Rear surface mounting
· Plate type
· Grips pipe-shaped workpieces with little distortion.Standard Price: MYR 9,024.72- Days to Ship: 14 Day(s) -
TC Type 2-Jaw Scroll Chuck Split Jaw (With Soft Jaw) Ordinary Type
KOBAYASHITEKKO
[Features]
· 2-jaw scroll chuck
· Split-jaw type with soft jaw
· Front surface mounting
· Plate type
· Ideal for gripping irregular-shaped workpieces such as valves, etc.Standard Price: MYR 5,421.40- Days to Ship: 14 Day(s) -
BP Type Back Plate For Scroll Chucks
KOBAYASHITEKKO
[Features]
· Chuck plate for a lathe
· For JIS and ASA-A1/A2 spindle ends
· Required to mount an ordinary-type chuck to a lathe.Standard Price: MYR 2,479.87- Days to Ship: 14 Day(s) -
TA Type 3-Jaw Scroll Chuck Split Jaw (With Hard Jaw / Soft Jaw) Direct Mounting Type
KOBAYASHITEKKO
[Features]
· 3-jaw scroll chuck
· Split-jaw type with hard jaw and soft jaw
· Direct mounting type (direct type)
· Short tapered chuck that can be directly mounted on a JIS and ASA-A1/A2 spindle lathe without a plate.
· Suitable for high-speed, heavy cutting due to the durable box body structure and balance correction.Standard Price: MYR 8,232.06- Days to Ship: 14 Day(s) -
LI Type 4-Jaw Independent Chuck (With Reversible Hard Jaws) Standard Type
KOBAYASHITEKKO
[Features]
· Standard-type 4-jaw single-acting chuck with the mount part the same as the JIS Standard.
· Uses jaws and a screw rod made from special steel with a design that reduces backlash.
· Ideal for gripping round workpieces and irregular-shaped workpieces.Days to Ship: 11 Day(s) or more -
MI Type 4-Jaw Independent Chuck (With Reversible Hard Jaws) Direct Mounting Type
KOBAYASHITEKKO
[Features]
· 4-jaw single-acting short tapered chuck that can be directly mounted on a JIS and ASA-A1/A2 spindle lathe without a plate.Standard Price: MYR 7,204.94 Days to Ship: 14 Day(s) -
LC Lever Chuck For Machine Tools
KOBAYASHITEKKO
[Features]
· High precision lever chuck made from steel. Use for compact precision lathes and compact polishing machines.
· YC101A and YC201A are equipped with an adapter for Tsugami (with fine adjustment mechanism)Standard Price: MYR 6,691.17- Days to Ship: 14 Day(s) -
Soft Jaws (STJ) For RAC/RAC-B/SAC (B) 3 Pieces / 1 Set
KOBAYASHITEKKO
Dedicated solenoid valve and hand valve provided.
[Features]
· Secondary side piping not required, making piping simple.
· Check valve ensures safety even during power outage or when there is an air piping accident.
· The hand valve is mounted directly on the chuck for convenient mounting and removal of the workpiece.Standard Price: MYR 697.32- Days to Ship: 14 Day(s) -
Hard Jaws (HTJ) For RAC/RAC-B/SAC (B) 3 Pieces / 1 Set
KOBAYASHITEKKO
Dedicated solenoid valve and hand valve provided.
[Features]
· Secondary side piping not required, making piping simple.
· Check valve ensures safety even during power outage or when there is an air piping accident.
· The hand valve is mounted directly on the chuck for convenient mounting and removal of the workpiece.Standard Price: MYR 2,443.71- Days to Ship: 14 Day(s) -
TV Type Jig Chuck Multi (6 Chucks) Soft Jaws / Handle Included As Standard
KOBAYASHITEKKO
Realizes efficient machining
[Features]
· Ideal for machining center clamp jigs
· Easy operation from above. Pneumatics or hydraulics not required.
· 3-jaw jig chuck
· With soft jaws
· 6 chucks.Standard Price: MYR 44,985.88 Days to Ship: 14 Day(s) -
Soft Jaw (SSJ) Integrated Soft Jaw (For SC/MC 3-Jaw Chucks)
KOBAYASHITEKKO
[Features]
· Soft jaw (integrated soft jaw) for SC/MC type chucks.Standard Price: MYR 717.73- Days to Ship: 11 Day(s) or more -
Master Jaw (MJ) Master Jaw For 3-Jaw Chucks (TC/TA/FCT/A Types) (For 3-Jaw Chucks)
KOBAYASHITEKKO
[Features]
· Master jaw for TC type chucks.Standard Price: MYR 4,018.01 Days to Ship: 14 Day(s) -
Handle (H) (1 Piece) (For SC/TC/TA/A Types)
KOBAYASHITEKKO
[Features]
· Scroll handle for SC/TC/TA/A type chucks.Standard Price: MYR 400.47 Days to Ship: 14 Day(s) -
Handle (H) (1 Piece) For Milling Chucks (For FCT)
KOBAYASHITEKKO
[Features]
· Scroll handle for milling chucks (for FCT).Standard Price: MYR 623.66- Days to Ship: 14 Day(s) -
Handle (H) 1 Piece For Independent Chucks
KOBAYASHITEKKO
Handle for independent chuck.
[Overall Length (mm)]: 200, "Width (mm)": 130
[Compatible Chuck Type]: LI-8,MI-8,MC-7Standard Price: MYR 337.36- Days to Ship: 14 Day(s) -
NAKANE Rotating Center, High-Speed Waterproof Type LF SP
SANYOSEISAKUSYO
With a labyrinth seal, it enables light rotation and provides waterproof performance for medium to high speed rotation. Inherits the compact design that is characteristic of NAKANE (same size as standard type LS).
[Features]
· With a labyrinth seal (non-contact), it provides high waterproof performance for medium to high speed rotation.
· 2 types of tip shape, SP type and TP type, are available to choose from for optimum center selection.Standard Price: MYR 1,580.32- Days to Ship: 12 Day(s) or more -
NAKANE Rotating Center, High-Speed Waterproof Type LF TP
SANYOSEISAKUSYO
With a labyrinth seal, it enables light rotation and provides waterproof performance for medium to high speed rotation.
[Features]
· Inherits the compact design that is characteristic of NAKANE (same size as standard type LS).
· With a labyrinth seal (non-contact), it provides high waterproof performance for medium to high speed rotation.
· 2 types of tip shape, SP type and TP type, are available to choose from for optimum center selection.Standard Price: MYR 1,862.82- Days to Ship: 12 Day(s) or more -
NAKANE Rotating Center, High-Speed Waterproof Type, LF, SP, with Cold Punched Nut
SANYOSEISAKUSYO
[Features]
· Easy to detach and attach in front with the forcing nut. The nut fits into the same size LF type and FP type.Standard Price: MYR 1,819.71- Days to Ship: 12 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Type |
| Mounting type |
| Compatible Chuck Nominal Size |
| Jaw Height(mm) |
| Compatible Manufacturer |
| Chuck Outer Diameter(mm) |
| Number of Jaws |
| Shank MT No |
| Tip Carbide Insert (Y/N) |
| Tip Width Across Flat(mm) |
| Auxiliary Jig Type |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | FUTAMURAKIKI | FUTAMURAKIKI | FUTAMURAKIKI | FUTAMURAKIKI | FUTAMURAKIKI | FUTAMURAKIKI | FUTAMURAKIKI | FUTAMURAKIKI | FUTAMURAKIKI | TAKURA KOGU | TAKURA KOGU | TAKURA KOGU | TAKURA KOGU | KAWASHIMO | NSK | NSK | NSK | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | KOBAYASHITEKKO | KOBAYASHITEKKO | KOBAYASHITEKKO | TEIKOKU_CHUCK | KOBAYASHITEKKO | KOBAYASHITEKKO | KOBAYASHITEKKO | KOBAYASHITEKKO | KOBAYASHITEKKO | KOBAYASHITEKKO | KOBAYASHITEKKO | KOBAYASHITEKKO | KOBAYASHITEKKO | KOBAYASHITEKKO | KOBAYASHITEKKO | KOBAYASHITEKKO | KOBAYASHITEKKO | KOBAYASHITEKKO | KOBAYASHITEKKO | SANYOSEISAKUSYO | SANYOSEISAKUSYO | SANYOSEISAKUSYO |
| Product Series | 3-Jaw Scroll Chuck (Split Jaw Type/Center Runout Adjustment) | SC Type 6-Jaw Scroll Chuck Integrated Jaw (With Internal Jaw / External Jaw) Ordinary Type | TC Type 2-Jaw Scroll Chuck Split Jaw (With Soft Jaw) Ordinary Type | TA Type 3-Jaw Scroll Chuck Split Jaw (With Hard Jaw / Soft Jaw) Direct Mounting Type | LI Type 4-Jaw Independent Chuck (With Reversible Hard Jaws) Standard Type | MI Type 4-Jaw Independent Chuck (With Reversible Hard Jaws) Direct Mounting Type | TV Type Jig Chuck Multi (6 Chucks) Soft Jaws / Handle Included As Standard | Master Jaw (MJ) Master Jaw For 3-Jaw Chucks (TC/TA/FCT/A Types) (For 3-Jaw Chucks) | NAKANE Rotating Center, High-Speed Waterproof Type, LF, SP, with Cold Punched Nut | ||||||||||||||||||||||||||||||||||||
| Days to Ship | 10 Day(s) | 10 Day(s) | 11 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 11 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 11 Day(s) or more | 7 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 9 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 10 Day(s) or more | 10 Day(s) | 10 Day(s) or more | 8 Day(s) or more | 14 Day(s) | 14 Day(s) | 14 Day(s) | 14 Day(s) | 11 Day(s) or more | 14 Day(s) | 14 Day(s) | 14 Day(s) | 14 Day(s) | 14 Day(s) | 11 Day(s) or more | 14 Day(s) | 14 Day(s) | 14 Day(s) | 14 Day(s) | 12 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more |
| Type | Soft Jaw | Soft Jaw | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | - | Rotation Center / Lathe Center | - | - | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | - | - | - | Lathe Chuck | - | - | - | - | - | - | - | - | - | - | Soft Jaw | - | - | - | Scroll Chuck Handle | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center |
| Mounting type | Upper and Lower Divided Jaw Type | Serrated Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Compatible Chuck Nominal Size | 6 ～ 18 | 6 ～ 15～22 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 5 ～ 310 | - | - | - | - | - | - | - |
| Jaw Height(mm) | 36 ～ 67 | 34 ～ 62 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 30 ～ 76.5 | - | - | - | - | - | - | - |
| Compatible Manufacturer | Victor | Matsumoto | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Victor | - | - | - | - | - | - | - |
| Chuck Outer Diameter(mm) | 152.4 ～ 457.2 | 152.4 ～ 381～558.8 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Number of Jaws | - | - | - | - | - | - | - | - | 5 ～ 8 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Shank MT No | - | - | MT3 ～ MT5 | MT3 ～ MT5 | MT3 ～ MT5 | MT2 ～ MT5 | MT5 ～ MT6 | MT1 ～ MT6 | MT4 ～ MT5 | - | MT2 ～ MT6 | MT1 ～ MT5 | MT2 ～ MT5 | MT2 ～ MT6 | MT3 ～ MT5 | - | MT3 ～ MT5 | - | - | MT1 ～ MT6 | MT1 ～ MT6 | MT2 ～ MT5 | MT1 ～ MT5 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | MT1 ～ MT5 | MT1 ～ MT5 | MT2 ～ MT5 |
| Tip Carbide Insert (Y/N) | - | - | Yes / N/A | Yes / N/A | N/A | Yes / N/A | N/A | Yes | N/A | N/A | N/A | Yes | Yes | N/A | Yes | - | N/A | - | - | N/A | Yes | Yes | Yes | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | N/A | N/A | N/A |
| Tip Width Across Flat(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 7 ～ 17 | - | - | - |
| Auxiliary Jig Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Type
-
Mounting type
-
Compatible Chuck Nominal Size
- B-212
- B-210
- B-208
- B-206
- B-205
- B-21
- B-15
- B-12
- B-10
- B-08
- B-06
- 4
- 5
- Type B 05
- Type HJ 5
- 5、6、8
- 5～8
- 6
- Type B 06
- Type GO 6
- 6、8、10
- 6～10
- 7
- 7・8
- 8
- Type B 08
- Type H 8-46
- 8、10、12
- 8～12
- 9
- 9・10
- 10
- Type B 10
- Type GO 10
- Type H 10-67
- 12
- Type B 12
- Type HJ 12
- 14～16
- 15
- Type B 15/18
- 15～22
- 16
- 18
- 21
- Type B 21/24
- Type HJ 24
- 80
- 85
- 110
- 130
- 140
- 160
- 165
- 190
- 200
- Type B 204/205
- Type B 206
- Type B 208
- Type B 210
- Type B 212
- Type B 215
- 230
- 250
- 273
- 310
- 385
- 400
- 460
- 500
-
Jaw Height(mm)
-
Compatible Manufacturer
-
Chuck Outer Diameter(mm)
- 50
- 63
- 80
- 82
- 87
- 100
- 101.6
- 112
- 125
- 127
- 132
- 152.4
- 165
- 167
- 177.8
- 177.8・203.2
- 190
- 192
- 200
- 203.2
- 228.6
- 228.6・254
- 232
- 233
- 254
- 273
- 274
- 304.8
- 310
- 355.6～406.4
- 381
- 381～558.8
- 385
- 457.2
- 460
-
Number of Jaws
-
Shank MT No
-
Tip Carbide Insert (Y/N)
-
Tip Width Across Flat(mm)
-
Auxiliary Jig Type
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Related Categories to Lathe Jigs
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy