(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Chamfering / Centering Tools（Page10）
Search by specifying the lower class category
Centering/Countersink
Chamfer, V-Grooves
Inner R
Replaceable Blade Type Chamfering Tools/Tips/Blades
| Days to Ship |
|
|---|
-
Counter Sink (Titanium Nitride Alumina Coating) Set
ILIX
[Features]
· Compared to TiN coatings, cutting speed and wear resistance are markedly improved, enabling high efficiency machining.
[Applications]
· Work materials: Steel, alloy steel, stainless steel, copper alloy, difficult-to-cut materials.
· For plating, chamfering, deburring.
[Material]
· High-speed steel (HSS)Standard Price: MYR 3,614.46 Days to Ship: 9 Day(s) -
Standard Price: MYR 779.25- Days to Ship: 9 Day(s) or more -
NOGA_JAPAN
[Features]
· Countersink carbide blade, suitable for high-hardness quenched steel.
[Applications]
· Work materials: 1,000 N/mm² or higher high hardness steel and 240 HB or higher gray cast iron, etc.
[Specifications]
· 3-Flute
[Material]
· Carbide (K20)Standard Price: MYR 1,191.71- Days to Ship: 5 Day(s) or more -
Standard Price: MYR 368.71- Days to Ship: 8 Day(s) or more -
Counter Sink Cobalt HSS【1-530 Pieces Per Package】
ALPEN
[Features]
· Countersink uses Cobalt HSS to provide demonstrably stable performance with exceptional heat resistance.
· 3-Flute
[Applications]
· Work materials: Iron, cast iron, non-ferrous metals, light metals.
[Material]
· Cobalt HSS (HSS-Co5)Standard Price: MYR 131.03- Days to Ship: 9 Day(s) -
Counter Sink HSS【1-544 Pieces Per Package】
ALPEN
[Features]
· Due to the optimum tip shape, high and stable cutting performance can be achieved.
· 3-Flute
[Applications]
· Work materials: Iron, cast iron, non-ferrous metals, light metals.
[Material]
· High-speed steel (HSS)Standard Price: MYR 118.38- Days to Ship: 9 Day(s) -
Counter Sink Quick Cut Single Body
RUKO
[Features]
· Thanks to the newly designed optimum cutting shape and combination of three flutes, the work speed increases by 30% or more compared with the conventional product, and at the same time the product life is extended by 25% or more.
[Applications]
· Work materials: Iron, cast iron, non-ferrous metals, light metals.
[Material]
· High-speed steel (HSS)Standard Price: MYR 240.59 Days to Ship: 10 Day(s) -
Counter Sink Integral Pilot Set
ATI
[Features]
· NATO stock number acquired.
· Achieves high concentricity due to shaving machining.
· M2 HSS steel is adopted to achieve excellent sharpness, high hardness, and wear resistance.
· To be mounted to micro stops.
· Countersink 4-piece set comes with a dedicated anodized aluminum holder.
· Flutes: 3
[Applications]
· For aircraft MRO.Standard Price: MYR 1,007.15 Days to Ship: 9 Day(s) or more -
ATI
[Features]
· NATO stock number acquired.
· Achieves high concentricity due to shaving machining.
· M2 HSS steel is adopted to achieve excellent sharpness, high hardness, and wear resistance.
· To be mounted to micro stops.
[Flute No.]
· ATI420D: 3
· ATI445E: 2
[Applications]
· For aircraft MRO.Standard Price: MYR 123.86- Days to Ship: 5 Day(s) or more -
STAR-M
[Features]
· Ideal for cutting off protrusions of decorative tapes and wood tapes attached to furniture or fittings.
· Uses ceramic blade.
· Cut end shape, square (90 degrees).
[Applications]
· For cutting decorative tapes.Standard Price: MYR 194.25 Days to Ship: 5 Day(s) or more -
Cutter Kadokko, Type: Chamfering Type- 0.3mm
STAR-M
[Features]
· Ideal for cutting off protrusions of decorative tapes and wood tapes attached to furniture or fittings.
· Uses ceramic blade.
· Cut end shape, chamfering width 0.3 mm.
[Applications]
· For cutting decorative tapes.Standard Price: MYR 194.25 Days to Ship: 8 Day(s) -
Cutter Kadokko, Type: Chamfering Type- 0.6mm
STAR-M
[Features]
· Ideal for cutting off protrusions of decorative tapes and wood tapes attached to furniture or fittings.
· Uses ceramic blade.
· Cut end shape, chamfering width 0.6 mm.
[Applications]
· For cutting decorative tapes.Standard Price: MYR 194.25 Days to Ship: 8 Day(s) -
Cutter Kadokko, Type: Chamfering Mold- 1.0mm
STAR-M
[Features]
· Ideal for cutting off protrusions of decorative tapes and wood tapes attached to furniture or fittings.
· Uses ceramic blade.
· Cut end shape, chamfering width 1 mm.
[Applications]
· For cutting decorative tapes.Standard Price: MYR 194.25 Days to Ship: 8 Day(s) -
Diamond-Shaped Tape Cutter, Type: Square Shape
STAR-M
[Features]
· Ideal for cutting off protrusions of decorative tapes and wood tapes attached to furniture or fittings.
· Can be used for polishing.
· Cut end shape, square (90 degrees).
[Applications]
· For cutting decorative tapes.Standard Price: MYR 215.43 Days to Ship: 8 Day(s) -
Diamond-Shaped Tape Cutter, Type: Chamfering Mold- 0.6mm
STAR-M
[Features]
· Ideal for cutting off protrusions of decorative tapes and wood tapes attached to furniture or fittings.
· Can be used for polishing.
· Cut end shape, chamfering width 0.6 mm.
[Applications]
· For cutting decorative tapes.Standard Price: MYR 215.43 Days to Ship: 8 Day(s) -
Diamond-Shaped Tape Cutter, Type: Chamfering Mold- 0.1mm
STAR-M
[Features]
· Ideal for cutting off protrusions of decorative tapes and wood tapes attached to furniture or fittings.
· Can be used for polishing.
· Cut end shape, chamfering width 1 mm.
[Applications]
· For cutting decorative tapes.Standard Price: MYR 215.43 Days to Ship: 8 Day(s) -
MAPAL
[Features]
· A new connection method "CFS" is adopted.
· Guaranteed high runout accuracy of 5 μm or less.
· Features simple operability and excellent stability.
· 90° chamfer shape.
[Applications]
· Work materials: Carbon steel, alloy steel, cast iron, stainless steel, light alloy.Standard Price: MYR 599.05- Days to Ship: 12 Day(s) or more -
FX-MG-CS X 90 Hole Chamfering, 3-Flute Countersink, FX Coating Carbide 90° Series
OSG
High-speed cutting is possible compared to conventional products, and a wide range of processing such as deburring and chamfering can be performed, resulting in a beautiful finished surface. High-speed steel series and carbide series are available.
Standard Price: MYR 999.31- Days to Ship: 5 Day(s) or more -
Chamfering Reamer (3-Flute) MC
DAIICHITOOL
[Features]
Chamfering reamers with an overall length of 55 to 95 mm and handle diameters of 8 mm, 10 mm and 12 mm.Standard Price: MYR 188.27- Days to Ship: 7 Day(s) or more -
ESCO
[Features]
An R type center drill with an overall length of 36 to 69 mm.
[Applications]
Can be used for precision machining and curved surface chamfering.Standard Price: MYR 155.16- Days to Ship: 12 Day(s) or more -
Standard Price: MYR 559.73 Days to Ship: 5 Day(s) or more -
AZIMUT Mobile Contouring Carrier
NOGA_JAPAN
Applications: Chamfering, horizontal type
, tool diameter (D) (mm): 0 to 2
Chamfer angle (°): 45
Set contents: Carbide Cutter KP-AZ660 includedStandard Price: MYR 11,052.46 Days to Ship: 11 Day(s) -
NOGA_JAPAN
A 500 W electric motor and 1.2 m flexible hose (KP-AZ0431) are required to use the NOGA AZIMUT chamfer carrier.
Standard Price: MYR 7,132.12- Days to Ship: 11 Day(s) -
Motor Flexible Hose for AZIMUT Mobile Chamfer Carrier
NOGA_JAPAN
It allows straight and curved parts to be easily chamfered by tracing the edge of the workpiece.
Standard Price: MYR 19,597.47 Days to Ship: 11 Day(s) -
WXL-Coated Chamfering Cutter Negative Type Regular W-HSCT-N
OSG
[Features]
· A unique 3-flute specification which helps prevent cracking during machining and which enables high-efficiency and high-feed machining.
The 40° torsion and wide tip pockets enable both excellent cutting performance and high level surface finishing.
Significantly reduces turning-back, or burring.
Excellent chip discharge.Standard Price: MYR 470.86- Days to Ship: 5 Day(s) or more -
Crystal Center Drill ZH330-TiN
RYOCO SEIKI
[Features]
· TiN coating is a highly reliable and versatile coating.
· The surface hardness is HV2,000 to 2,200, the heat-resistance temperature is around 500°C and the friction coefficient is 0.4Standard Price: MYR 444.41 Days to Ship: 10 Day(s) or more -
WXL-Coated Chamfering Cutter Positive Type Regular W-HSCT-P
OSG
[Features]
· A unique 3-flute specification which helps prevent cracking during machining and which enables high-efficiency and high-feed machining.
The 40° torsion and wide tip pockets enable both excellent cutting performance and high level surface finishing.
Significantly reduces turning-back, or burring.
Excellent chip discharge.Standard Price: MYR 470.86- Days to Ship: 5 Day(s) or more -
WXL-Coated Chamfering Cutter Positive Type Long Shank WLS-HSCT-P
OSG
[Features]
· A unique 3-flute specification which helps prevent cracking during machining and which enables high-efficiency and high-feed machining.
The 40° torsion and wide tip pockets enable both excellent cutting performance and high level surface finishing.
Significantly reduces turning-back, or burring.
Excellent chip discharge.Standard Price: MYR 498.20- Days to Ship: 5 Day(s) or more -
WXL-Coated Chamfering Cutter Negative Type Long Shank WLS-HSCT-N
OSG
[Features]
· A unique 3-flute specification which helps prevent cracking during machining and which enables high-efficiency and high-feed machining.
The 40° torsion and wide tip pockets enable both excellent cutting performance and high level surface finishing.
Significantly reduces turning-back, or burring.
Excellent chip discharge.Standard Price: MYR 498.20- Days to Ship: 5 Day(s) or more -
MUGEN Coating C Chamfer Cutter NSCV-M
NS TOOL
[Features]
· Enables easy C chamfering.
· Uses MUGEN coating that dramatically improves the durability.Standard Price: MYR 423.06- Days to Ship: 11 Day(s) -
NS TOOL
[Features]
· It allows easy chamfer edge machining.
[Part Number: NSCV-4]
cutting diameter (D) (mm): 4
Blade length (mm): 2
Shank diameter (d) (mm): 4
Overall length (mm): 60
Minimum order quantity: 1 pc.
[Part Number: NSCV-6]
cutting diameter (D) (mm): 6
Blade length (mm): 3
Shank diameter (d) (mm): 6
Overall length (mm): 70
Minimum order quantity: 1 pc.Standard Price: MYR 412.66- Days to Ship: 11 Day(s) -
EIKOSHA
Flute shape: Right-hand straight flute
Work material: General steel / heat-treated steel / aluminum / copper
[Applications]Used for round chamfering.Standard Price: MYR 371.56- Days to Ship: 8 Day(s) or more -
V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 60°
MAKOTOLOY
[Features]
·1 pc. of V-cut end mill can be used for various purposes such as centering countersinking, inner chamfering, outer peripheral chamfering, side machining, V-groove, drilling, and is ideal for MC and NC machining
·Since the cutting tip is close to the V edge, the residue on the bottom during V-groove machining is very few
·Since it is based on a carbide end mill with a right blade and a right twist of 30°, the sharpness is one of the best and the discharge of cutting chips is also good
·Since the ultra-fine carbide alloy is used as the carbide material, it has a lifespan approx. 10 times longer than that of HSS end mill. Furthermore, the V-cut end mill coating series has a long lifespan and increases cutting speed to shorten machining time
・ Standard typeStandard Price: MYR 456.66- Days to Ship: 9 Day(s) or more -
V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 90°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.
· Standard type.Standard Price: MYR 456.66- Days to Ship: 7 Day(s) or more -
V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 120°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.
· Standard type.Standard Price: MYR 456.66- Days to Ship: 7 Day(s) or more -
V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 60°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material.
· Long tool life, improved cutting speed and reduced machining time.
· Standard type.Standard Price: MYR 613.06- Days to Ship: 7 Day(s) or more -
V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 90°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material.
· Long tool life, improved cutting speed and reduced machining time.
· Standard type.Standard Price: MYR 613.06- Days to Ship: 7 Day(s) or more -
V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 120°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material.
· Long tool life, improved cutting speed and reduced machining time.
· Standard type.Standard Price: MYR 613.06- Days to Ship: 7 Day(s) or more -
V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 60°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.
· Long type.Standard Price: MYR 548.20- Days to Ship: 11 Day(s) or more -
V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 90°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.
· Long type.Standard Price: MYR 548.20- Days to Ship: 11 Day(s) or more -
V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 120°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.
· Long type.Standard Price: MYR 548.20- Days to Ship: 11 Day(s) or more -
V-Cut Carbide End Mills, Long Type, Coated Series AMVL 60°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material.
· Long tool life, improved cutting speed and reduced machining time.
· Long type.Standard Price: MYR 655.81- Days to Ship: 5 Day(s) or more -
V-Cut Carbide End Mills, Long Type, Coated Series AMVL 90°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material.
· Long tool life, improved cutting speed and reduced machining time.
· Long type.Standard Price: MYR 655.81- Days to Ship: 7 Day(s) or more -
Carbide V Cut End Mill Long Type Coated Series AMVL 120°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material.
· Long tool life, improved cutting speed and reduced machining time.
· Long type.Standard Price: MYR 655.81- Days to Ship: 11 Day(s) or more -
V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 60°
MAKOTOLOY
[Features]
· A small but high quality end mill that can also be used with high precision machining technology.Standard Price: MYR 499.25- Days to Ship: 11 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Tool Material Type |
| Tool Diameter (D)(mm) |
| Tip angle (θ) |
| Application |
| work material |
| Single blade, two blades |
| Peripheral Blade Y/N |
| Coating Y/N |
| Coating Type |
| R Size (R)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | ILIX | ALPEN | NOGA_JAPAN | RUKO | ALPEN | ALPEN | RUKO | ATI | ATI | STAR-M | STAR-M | STAR-M | STAR-M | STAR-M | STAR-M | STAR-M | MAPAL | OSG | DAIICHITOOL | ESCO | OSG | NOGA_JAPAN | NOGA_JAPAN | NOGA_JAPAN | OSG | RYOCO SEIKI | OSG | OSG | OSG | NS TOOL | NS TOOL | EIKOSHA | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY |
| Product Series | FX-MG-CS X 90 Hole Chamfering, 3-Flute Countersink, FX Coating Carbide 90° Series | WXL-Coated Chamfering Cutter Positive Type Long Shank WLS-HSCT-P | WXL-Coated Chamfering Cutter Negative Type Long Shank WLS-HSCT-N | V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 60° | V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 90° | V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 120° | V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 60° | V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 90° | V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 120° | V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 60° | V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 90° | V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 120° | V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 60° | ||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||||
| Days to Ship | 9 Day(s) | 9 Day(s) or more | 5 Day(s) or more | 8 Day(s) or more | 9 Day(s) | 9 Day(s) | 10 Day(s) | 9 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 8 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 12 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 12 Day(s) or more | 5 Day(s) or more | 11 Day(s) | 11 Day(s) | 11 Day(s) | 5 Day(s) or more | 10 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 11 Day(s) | 11 Day(s) | 8 Day(s) or more | 9 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 11 Day(s) or more | 11 Day(s) or more |
| Tool Material Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Carbide | Cobalt HSS | - | High-speed steel | - | - | - | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | High-speed steel | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide |
| Tool Diameter (D)(mm) | - | 5.3 ～ 31 | 6.3 ～ 31 | 19 ～ 31 | 4.3 ～ 31 | 6.3 ～ 25 | 23 | - | - | - | - | - | - | - | - | - | - | 1 ～ 3.8 | 8 ～ 46 | - | 12 | 0 to 2 | 0.3, 0.6 ～ 1, 2 | - | - | 0.8 | - | - | - | 4 ～ 6 | 4 ～ 6 | 9 ～ 48 | 1 ～ 20 | 1 ～ 20 | 1 ～ 20 | 1 ～ 20 | 1 ～ 20 | 1 ～ 20 | 3 ～ 20 | 3 ～ 20 | 3 ～ 20 | 3 ～ 20 | 3 ～ 20 | 3 ～ 20 | 0.3 ～ 0.9 |
| Tip angle (θ) | 90 | 90° | 90 | 90 | 90° | 90° | 90 | Cutter Tip Angle: 100° | Cutter Tip Angle: 100° | - | - | - | - | - | - | - | - | 90 | 60° ～ 90° | - | 90 | - | - | - | 90° | 60 × 120 | - | - | - | 45° | 45° | - | 60 | 90 | 120 | 60 | 90 | 120 | 60 | 90 | 120 | 60 | 90 | 120 | 60 |
| Application | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Chamfering/Horizontal | - | - | Chamfering/Horizontal | Chamfering/Horizontal / Round Chamfer | Chamfering/Horizontal | Chamfering/Horizontal | Centering (Positioning) | - | - | - | Chamfering/Horizontal | Chamfering/Horizontal | Round Chamfer | Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling | Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling | Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling | Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling | Hole Chamfer / Chamfering/Horizontal |
| work material | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | - | - | - | - | - | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] | - | general steel[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎] | general steel[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎] | general steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] | general steel[○] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○] | Aluminum[◎] / Copper[◎] / Resin[◎] | general steel[○] / Quenched and tempered steel[○] / Aluminum[○] / Copper[○] | general steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Cast Iron[○] / Aluminum[○] |
| Single blade, two blades | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Single blade | Single blade | - | Single blade | - | - | - | Single blade | Double-edged | - | - | - | Single blade | Single blade | - | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade |
| Peripheral Blade Y/N | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | NA | Available | - | Available | - | - | - | NA | NA | - | - | - | Available | Available | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Coating Y/N | - | Available | - | - | NA | NA | - | - | - | - | - | - | - | - | - | - | Available | Available | - | - | Available | - | - | - | Available | Available | Available | Available | Available | Available | NA | - | NA | NA | NA | Available | Available | Available | NA | NA | NA | Available | Available | Available | NA |
| Coating Type | TiAlN | Other | Non-Coated | TiAlN | - | - | - | - | - | - | - | - | - | - | - | - | Other | TiAlN | - | - | TiN | - | - | - | - | TiN | Other | Other | Other | TiAlN | - | - | - | - | - | TiAlN | TiAlN | TiAlN | - | - | - | TiAlN | TiAlN | TiAlN | - |
| R Size (R)(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1, 1.5 ～ 2, 3 | - | - | - | - | - | - | - | - | R0.5 ～ R16 | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Tool Material Type
-
Tool Diameter (D)(mm)
- 0 to 2
- 0.03
- 0.04
- 0.05
- 0.06
- 0.07
- 0.08
- 0.09
- 0.1
- 0.11
- 0.12
- 0.13
- 0.14
- 0.15
- 0.16
- 0.17
- 0.18
- 0.19
- 0.2
- 0.21
- 0.22
- 0.23
- 0.24
- 0.25
- 0.26
- 0.27
- 0.28
- 0.29
- 0.3
- 0.3, 0.6
- 0.35
- 0.4
- 0.45
- 0.45～2.1
- 0.45～2.7
- 0.5
- 0.5, 1
- 0.55
- 0.6
- 0.65
- 0.65～2.1
- 0.65～2.7
- 0.7
- 0.75
- 0.8
- 0.85
- 0.9
- 0.95
- 1
- 1, 2
- 1～6
- 1.1
- 1.2
- 1.25
- 1.3
- 1.4
- 1.5
- 1.6
- 1.7
- 1.8
- 1.9
- 2.
- 2
- 2~5
- 2～10
- 2～13
- 2.1
- 2.2
- 2.3
- 2.4
- 2.5
- 2.5～5.3
- 2.6
- 2.7
- 2.8
- 2.9
- 3
- 3～14
- 3～15
- 3.1
- 3.15
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.8
- 4
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.8
- 5
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.6
- 5.8
- 6
- 6.2
- 6.3
- 6.3,8.3,10.4,12.4,16.5,20.5
- 6.30/8.30/10.40/12.40/16.50/20.50
- 6.3/8.3/10.4/12.4/16.5/20.5
- 6.35
- 6.4
- 6.5
- 6.6
- 6.8
- 7
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.7
- 7.8
- 8
- 8.2
- 8.3
- 8.4
- 8.5
- 8.8
- 9
- 9.1
- 9.4
- 9.5
- 9.52
- 10
- 10.1
- 10.2
- 10.3
- 10.4
- 10.5
- 10.8
- 11
- 11.1
- 11.2
- 11.4
- 11.5
- 11.88
- 12
- 12.1
- 12.3
- 12.4
- 12.5
- 12.7
- 13
- 13.4
- 13.5
- 14
- 14.2
- 14.4
- 14.5
- 14.6
- 14.8
- 15
- 15.1
- 15.2
- 15.4
- 15.5
- 15.6
- 15.87
- 16
- 16.15
- 16.3
- 16.5
- 16.5,20.5,25.0,37.0
- 17
- 17.1
- 17.7
- 18
- 18.2
- 18.5
- 18.6
- 19
- 19.05
- 19.5
- 20
- 20.5
- 21
- 21.77
- 22
- 22.3
- 22.4
- 22.5
- 23
- 23.4
- 23.5
- 24
- 24.5
- 25
- Max: 25, Min: 4.2
- 25.20
- 25.3
- 26
- 26.5
- 26.6
- 27
- 27.5
- 28
- 28.5
- 29
- 29.9
- 30
- Max: 30, Min: 4
- 30.20
- 30.5
- 31
- Max: 31, Min: 10
- 31.5
- 31.7
- 31.9
- 32
- 32.6
- 32.7
- 33
- 33.1
- 33.3
- 34
- 34.1
- 34.8
- 34.9
- 35
- 35.4
- 35.5
- 35.9
- 36
- 36.9
- 37
- 37.1
- 37.9
- 38
- 39
- 39.83
- 40
- Max: 41, Min: 20
- 42
- 43
- 45
- 45.6
- 46
- 47
- 48
- 49
- 49.85～134.6
- 50
- 50.7
- 51
- 52
- 52.8
- 53
- 53.6
- 53.91
- 54
- 54.3
- 55
- 56
- 56.8
- 57.0
- 57.9
- 58
- 58.2
- 60
- 61.4
- 62
- 62.2
- 63
- 64
- 64.6
- 65
- 66
- 67.4
- 67.94
- 69.2
- 69.8
- 70
- 71.8
- 72
- 73.3
- 74
- 75
- 76
- 80
- 90
- 95
- 100
-
Tip angle (θ)
-
Application
-
work material
-
Single blade, two blades
-
Peripheral Blade Y/N
-
Coating Y/N
-
Coating Type
-
R Size (R)(mm)
- 0.1
- 0.15
- 0.2
- 0.25
- 0.3
- 0.35
- 0.4
- 0.45
- 0.5
- R0.5
- 0.5/1/1.5/2
- 0.5 to 4
- 0.5~5
- 0.55
- 0.6
- 0.65
- 0.7
- 0.75
- R0.75
- 0.8
- 0.85
- 0.9
- 0.95
- 1
- 1RM
- 1RY
- R1
- 1, 1.5
- 1/2/3/4
- 1–3
- 1–5
- 1.05
- 1.1
- 1.15
- 1.2
- 1.25
- R1.25
- 1.3
- 1.35
- 1.4
- 1.45
- 1.5
- R1.5
- 1.55
- 1.6
- 1.65
- 1.7
- 1.75
- 1.8
- 1.85
- 1.9
- 1.95
- 2
- 2RM
- 2RY
- R2
- 2, 3
- 2.05
- 2.1
- 2.15
- 2.2
- 2.25
- 2.3
- 2.35
- 2.4
- 2.45
- 2.5
- R2.5
- 2.6
- 2.7
- 2.75
- 2.8
- 2.9
- 3
- 3RM
- 3RY
- R3
- 3.25
- 3.5
- R3.5
- 3.75
- 4
- 4RM
- 4RY
- R4
- 4.25
- 4.5
- R4.5
- 4.75
- 5
- 5RM
- R5
- 5–10
- 5.25
- 5.5
- 5.75
- 6
- R6
- 6.25
- 6.5
- 6.75
- 7
- R7
- 7.25
- 7.5
- 7.75
- 8
- R8
- 8.25
- 8.5
- 8.75
- 9
- R9
- 9.5
- 10
- R10
- 10.5
- 11
- 11.5
- 12
- R12
- 12.5
- R12.5
- 13
- 13.5
- 14
- 14.5
- 15
- R15
- 15.5
- 16
- R16
- 16.5
- 17
- 17.5
- 18
- 18.5
- 19
- 19.5
- 20
- 20.5
- 21
- 21.5
- 22
- 22.5
- 23
- 23.5
- 24
- 24.5
- 25
- 25.5
- 26
- 26.5
- 27
- 27.5
- 28
- 28.5
- 29
- 29.5
- 30
- XRM
- XRY
Narrow search by specifying Manufacturer
-
- FUJIGEN (70)
- YAMAWA MFG (63)
- IWATA TOOL (48)
- GUHRING (25)
- OSG (25)
- MAKOTOLOY (22)
- EIKOSHA (19)
- THE_CUT (19)
- NOGA_JAPAN (16)
- DAISHOWASEIKI (15)
- ILIX (15)
- Nine9 (9)
- STAR-M (9)
- ATOM (7)
- KYOWA SEIKO (7)
- OKABE (7)
- SANKO MFG (7)
- TRUSCO NAKAYAMA (7)
- TAIYO-TOOL (6)
- FUKUDA (5)
- DIXI (4)
- NS TOOL (4)
- OKAZAKI SEIKO (4)
- RUKO (4)
- ALPEN (3)
- ASAHI TOOLS (3)
- DIJET (3)
- MAPAL (3)
- ATI (2)
- DAIICHITOOL (2)
- SANDVIK (2)
- 7 LEADERS (1)
- ESCO (1)
- NIKKENKOSAKU (1)
- SPEED TIGER (1)
- RYOCO SEIKI (1)
- SKC (1)
- UNION TOOL (1)
CAD
-
- 2D
- 3D
Related Categories to Chamfering / Centering Tools
-
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy