(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Chamfering / Centering Tools（work material：Cast Iron Page4）
Search by specifying the lower class category
Centering/Countersink
Chamfer, V-Grooves
Inner R
Replaceable Blade Type Chamfering Tools/Tips/Blades
| Days to Ship |
|
|---|
-
FUJIGEN
[Features]
· Simultaneous chamfering. : Can be used for front and back chamfering, as well as side V-groovingStandard Price: MYR 895.11- Days to Ship: 8 Day(s) or more -
FUJIGEN
This tool is specialized for back chamfering in drilling and edge chamfering.
The insert with chip breaker provides excellent sharpness.
Since the insert is replaceable, there is no need to re-grind it.Standard Price: MYR 1,107.08- Days to Ship: 6 Day(s) or more -
FUJIGEN
[Features]
· Variable angle type. : Features a serrated structure and double-clamp mechanism that provides good part retention and prevents tip movement during machining.
· 0° to 90° at 5° pitch for easy, reliable angle adjustmentStandard Price: MYR 2,814.51- Days to Ship: 9 Day(s) -
FUJIGEN
[Features]
· Small diameter type. Small diameter type supporting smaller diameter machining than conventional chamfer cutters.
· Angle can be selected from 15° to 75° (5° increments) according to applications.
· Tips are available in many materials to support diverse workpieces.Standard Price: MYR 924.70 Days to Ship: 6 Day(s) or more -
FUJIGEN
[Features]
· Turning tool type. Telescopic turning tool enables a wide range of chamfering.
· Hole chamfering capacity: φ28 mm - φ134 mm.
· Uses the T32 type tip.Standard Price: MYR 2,144.07 Days to Ship: 10 Day(s) -
FUJIGEN
It is a dedicated accessory for the Baitender.
A wide area of chamfering is possible with the telescopic tool bit.Standard Price: MYR 599.36 Days to Ship: 9 Day(s) -
FUJIGEN
[Features]
· Easy rounding change: Various round chamfering is possible by exchanging the tip.Standard Price: MYR 1,491.71 Days to Ship: 4 Day(s) or more -
FUJIGEN
Single flute replaceable insert for round chamfering of R0.5 to R5 and also for small diameter round chamfering.
Using Fujigen's unique negative/positive method, it is possible to cut R5 in a single process.Standard Price: MYR 934.35- Days to Ship: 9 Day(s) or more -
FUJIGEN
Single flute replaceable insert for round chamfering of R5 to R10.
Fujigen's original negative/positive method is used, so it is possible to cut R10 in a single process even with compact machining.Standard Price: MYR 924.70- Days to Ship: 8 Day(s) or more -
Standard Price: MYR 2,456.61- Days to Ship: 6 Day(s) or more -
FUJIGEN
Round chamfering and C chamfering of R1, R2, and R3 are possible by exchanging the insert.
The unique insert replacement method makes insert replacement fast and accurate.Standard Price: MYR 934.35 Days to Ship: 10 Day(s) -
FUJIGEN
[Features]
· Front and back round and corner chamfering possible. Back and front C chamfering is also possible by exchanging the tip.
· Mini R is for front only.
· Uses a tip that allows 8 corners to be used.Standard Price: MYR 2,197.67- Days to Ship: 9 Day(s) -
FUJIGEN
8 corners of an insert can be used.
Round chamfering and C chamfering are possible by exchanging the insert.Standard Price: MYR 822.57 Days to Ship: 6 Day(s) or more -
Tips for Chibieco and Chibieco 2 TXMT080206
FUJIGEN
An indexable insert that can perform chamfering.
[Applications]Used for centering (positioning) / chamfering / horizontal running.Standard Price: MYR 107.68 Days to Ship: 8 Day(s) or more -
Tip for Momieco / Momieco 2 TXMT110306
FUJIGEN
An indexable insert that can perform chamfering.
Compatible models: Momieco/Momieco 2/Urazaguru
[Applications]Used for centering (positioning) / chamfering / horizontal running.Standard Price: MYR 116.96 Days to Ship: 8 Day(s) or more -
Tip for Momimen nano ENGX040102
FUJIGEN
Insert for Momimen nano.
[Applications]It is used for center hole spotting, countersunk chamfering, and edge chamfering.Standard Price: MYR 130.11 Days to Ship: 9 Day(s) -
FUJIGEN
An indexable insert for Chibimomi that can be used for center spotting and chamfering.
[Applications]It is used for center hole spotting, countersunk chamfering, and edge chamfering.Standard Price: MYR 107.10 Days to Ship: 9 Day(s) -
FUJIGEN
Tip materials are cermet / K10 class carbide / M20 class carbide / HSS.
Standard Price: MYR 120.85 Days to Ship: 9 Day(s) or more -
FUJIGEN
An indexable insert for 60° Momimen that can be used for center spotting and chamfering.
[Applications]It is used for center hole spotting, countersunk chamfering, and edge chamfering.Standard Price: MYR 202.96 Days to Ship: 9 Day(s) -
Tip for Ecomen / Ecomen 2 TXMT16T306
FUJIGEN
An indexable insert that can perform chamfering.
Compatible models: Ecomen / Ecomen 2 / Choumen / Choumen B
[Applications]Used for chamfering.Standard Price: MYR 126.25 Days to Ship: 8 Day(s) or more -
Tip for Chamfering Cutter / RC End Cutter / Baitender T32MOR
FUJIGEN
Inserts for chamfering cutters / R Cindo-Cutters / Baitenders.
Standard Price: MYR 47.26- Days to Ship: 9 Day(s) or more -
Tip for Chamfering Cutter / RC End Cutter / Baitender TT32GUR
FUJIGEN
Tip materials are cermet / K10 class carbide / M20 class carbide / micro grain carbide / HSS.
Standard Price: MYR 92.53- Days to Ship: 6 Day(s) or more -
FUJIGEN
A dedicated indexable insert for a chamfer cutter Young Men that can perform chamfering.
[Applications]Used for chamfering.Standard Price: MYR 144.81- Days to Ship: 5 Day(s) or more -
FUJIGEN
A dedicated carbide insert for Gentlemen that can perform chamfering.
[Applications]Used for chamfering.Standard Price: MYR 293.06- Days to Ship: 9 Day(s) -
FUJIGEN
A K10 grade carbide insert for Ryanmencut-V.
[Applications]Used for back and surface chamfering.Standard Price: MYR 89.35 Days to Ship: 9 Day(s) -
Standard Price: MYR 116.21- Days to Ship: 8 Day(s) or more -
Standard Price: MYR 124.60- Days to Ship: 10 Day(s) -
Tip for R-Nouveau / R-Nouveau Jr.
FUJIGEN
An insert for R-Nouveau / R-Nouveau Jr. /10R-Tool Bit.
The number of used corners is 1Standard Price: MYR 215.36- Days to Ship: 9 Day(s) or more -
Both Sides Cut (RR16-30S / RR25-40S)/ for Mini R Tip
FUJIGEN
An insert for Ryanmencut-R and Mini-R.
Compatible models: Ryanmencut-R / Mini-R / Nice-Corner FR
[Applications]Used for round chamfering.Standard Price: MYR 131.82 Days to Ship: 7 Day(s) or more -
FUJIGEN
An indexable insert that can perform counterbore.
[Applications]It is used for counterboring.Standard Price: MYR 49.81- Days to Ship: 9 Day(s) or more -
Eagle Cut For (M8-M30) / For Birdy Cut Tip
FUJIGEN
An indexable insert that can perform counterbore.
Compatible models: Eaglecut (M8 to M30) / BirdiecutStandard Price: MYR 51.51- Days to Ship: 9 Day(s) or more -
FUJIGEN
It is an insert that can perform round chamfering.
[Applications]Used for round chamfering.Standard Price: MYR 1,521.53 Days to Ship: 9 Day(s) -
FUJIGEN
Tip materials are cermet / K10 class carbide / M20 class carbide / micro grain carbide.
Standard Price: MYR 42.56- Days to Ship: 9 Day(s) or more -
FUJIGEN
This is an insert for N-type that can be used for face machining.
[Applications]Used for face milling and chamfering.Standard Price: MYR 119.12 Days to Ship: 9 Day(s) -
FUJIGEN
A carbide insert for T-type that can perform shoulder processing.
Compatible models: New Nice Cut / Skat Cut
[Applications]It is used for shoulder processing.Standard Price: MYR 61.08- Days to Ship: 9 Day(s) or more -
FUJIGEN
[Features]
Materials: Cermet, carbide grade K10, carbide grade M20
Number of corners used: 6Standard Price: MYR 61.08- Days to Ship: 9 Day(s) -
FUJIGEN
[Features]
Materials: Cermet, carbide grade K10, carbide grade M20
Edge shape: Honed edge, sharp edgeStandard Price: MYR 88.66- Days to Ship: 9 Day(s) -
FUJIGEN
[Features]
·For Shurillin (C32GUR)
Materials: Carbide grade K10, carbide grade M20
Edge shape: Honed edge, sharp edgeStandard Price: MYR 77.04- Days to Ship: 8 Day(s) or more -
Standard Price: MYR 110.46 Days to Ship: 7 Day(s) or more -
FUJIGEN
[Features]
·For Sumicco
The insert material is carbide grade K10 / carbide grade M20.Standard Price: MYR 105.63 Days to Ship: 9 Day(s) or more -
FUJIGEN
[Features]
·An insert made of carbide grade K10 / carbide grade M20 for Dekasumi.Standard Price: MYR 178.48 Days to Ship: 9 Day(s) or more -
FUJIGEN
[Features]
·Chamfering for R Cindo-Cutters (T32GSR) Material: Carbide grade M20
Work material: General steel / stainless steel / cast iron / aluminum / resinStandard Price: MYR 181.53 Days to Ship: 9 Day(s) or more -
Counter Sink【1-6 Pieces Per Package】
TRUSCO NAKAYAMA
[Features]
· It uses cobalt high-strength steel for its base metal and has excellent wear and heat resistance.
· It easily expels chips because it uses 3 flute edges, providing a beautiful finish.
[Applications]
· Work materials: Iron, casting, stainless steel.
· Chamfering.
· Deburring.
· For countersinking.Standard Price: MYR 127.58- Days to Ship: 5 Day(s) or more -
Chamfering cutter, hex shaft, "Nice Men G" (titanium-coated)
TRUSCO NAKAYAMA
[Features]
· Ideal for C chamfering and deburring with Allen wrench (6.35 mm) in line operation.
· Titanium coating on blade suppresses burr adhesion on blade edge. Extended life.
[Applications]
· Work materials: Aluminum, iron, resin, copper, galvalume.Standard Price: MYR 138.53- Days to Ship: 5 Day(s) or more -
Center Drill, Okabe Standard, Type 1, G Coating 60°
OKABE
Because it is made of high-speed steel, it has high hardness. It is a center drill manufactured with one of the best heat treatment, making it suitable for machining general steel, stainless steel, cast iron and aluminum.
Standard Price: MYR 104.58- Days to Ship: 5 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Tool Material Type |
| Tool Diameter (D)(mm) |
| Tip angle (θ) |
| Application |
| work material |
| Single blade, two blades |
| Peripheral Blade Y/N |
| Coating Y/N |
| Coating Type |
| R Size (R)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | OKABE |
| Product Series | Tip for Chamfering Cutter / RC End Cutter / Baitender T32MOR | Tip for Chamfering Cutter / RC End Cutter / Baitender TT32GUR | Chamfering cutter, hex shaft, "Nice Men G" (titanium-coated) | ||||||||||||||||||||||||||||||||||||||||||
| CAD | |||||||||||||||||||||||||||||||||||||||||||||
| Days to Ship | 8 Day(s) or more | 6 Day(s) or more | 9 Day(s) | 6 Day(s) or more | 10 Day(s) | 9 Day(s) | 4 Day(s) or more | 9 Day(s) or more | 8 Day(s) or more | 6 Day(s) or more | 10 Day(s) | 9 Day(s) | 6 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 9 Day(s) | 9 Day(s) | 9 Day(s) or more | 9 Day(s) | 8 Day(s) or more | 9 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 9 Day(s) | 9 Day(s) | 8 Day(s) or more | 10 Day(s) | 9 Day(s) or more | 7 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) | 9 Day(s) or more | 9 Day(s) | 9 Day(s) or more | 9 Day(s) | 9 Day(s) | 8 Day(s) or more | 7 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more |
| Tool Material Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Cobalt HSS | High-speed steel | High-speed steel |
| Tool Diameter (D)(mm) | 19.5 ～ 45.6 | 6.2 ～ 14 | - | 13.5 ～ 18.2 | 49.85～134.6 | 16 | - | 25 | 35.4 | 69.2 | 25 | 30 ～ 48 | 16 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.3 ～ 10 |
| Tip angle (θ) | 45 | 45 | 0–90 | 15 ～ 75 | 45 | 45 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 90 | 90 | 60 |
| Application | Chamfering/Horizontal / V Groove | Chamfering/Horizontal | Chamfering/Horizontal / V Groove | Chamfering/Horizontal | Chamfering/Horizontal | Chamfering/Horizontal | Round Chamfer | Round Chamfer | Round Chamfer | Round Chamfer | Round Chamfer | Round Chamfer | Round Chamfer | Centering (Positioning) / Chamfering/Horizontal | Centering (Positioning) / Chamfering/Horizontal | Centering (Positioning) / Chamfering/Horizontal | Centering (Positioning) / Chamfering/Horizontal | Centering (Positioning) / Chamfering/Horizontal | Centering (Positioning) / Chamfering/Horizontal | Centering (Positioning) / Chamfering/Horizontal | Chamfering/Horizontal / Round Chamfer | Chamfering/Horizontal / Round Chamfer | Chamfering/Horizontal | Chamfering/Horizontal | Chamfering/Horizontal | Chamfering/Horizontal | Chamfering/Horizontal | Round Chamfer | Round Chamfer | Hole Chamfer | Hole Chamfer | Round Chamfer | Chamfering/Horizontal / Round Chamfer | Round Chamfer | - | - | - | - | - | - | - | Round Chamfer | Hole Chamfer | Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) |
| work material | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] |
| Single blade, two blades | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Single blade | Single blade | Double-edged |
| Peripheral Blade Y/N | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | NA | NA | NA |
| Coating Y/N | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | Available | Available | Available | NA | NA | Available | Available | Available / NA | Available / NA | Available | Available / NA | Available | Available / NA | Available / NA | NA | NA | Available / NA | Available / NA | NA | Available / NA | NA | Available / NA | Available / NA | NA | Available / NA | NA | NA | NA | NA | NA | Available | Available |
| Coating Type | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | AlCrN | AlCrN | AlCrN | Non-Coated | Non-Coated | TiN | AlCrN | TiN / Non-Coated | TiN / Non-Coated / AlCrN | AlCrN | Non-Coated / AlCrN | TiN | TiAlN / Non-Coated | Non-Coated / AlCrN | Non-Coated | Non-Coated | TiAlN / Non-Coated | TiAlN / Non-Coated | Non-Coated | TiN / Non-Coated | Non-Coated | TiN / Non-Coated | TiN / Non-Coated | Non-Coated | TiN / Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | - | TiN | TiN |
| R Size (R)(mm) | - | - | - | - | - | - | 0.5 to 4 | 0.5~5 | 5–10 | 5–10 | 1–3 | 0.5~5 ～ 1–5 | 1–5 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 5 ～ 10 | 1RM ～ XRY | - | - | - | - | - | - | - | - | 0.2 ～ 0.8 | - | - | - | 1 ～ 3 | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Tool Material Type
-
Tool Diameter (D)(mm)
- 0 to 2
- 0.03
- 0.04
- 0.05
- 0.06
- 0.07
- 0.08
- 0.09
- 0.1
- 0.11
- 0.12
- 0.13
- 0.14
- 0.15
- 0.16
- 0.17
- 0.18
- 0.19
- 0.2
- 0.21
- 0.22
- 0.23
- 0.24
- 0.25
- 0.26
- 0.27
- 0.28
- 0.29
- 0.3
- 0.3, 0.6
- 0.35
- 0.4
- 0.45
- 0.45～2.1
- 0.45～2.7
- 0.5
- 0.5, 1
- 0.55
- 0.6
- 0.65
- 0.65～2.1
- 0.65～2.7
- 0.7
- 0.75
- 0.8
- 0.85
- 0.9
- 0.95
- 1
- 1, 2
- 1～6
- 1.1
- 1.2
- 1.25
- 1.3
- 1.4
- 1.5
- 1.6
- 1.7
- 1.8
- 1.9
- 2.
- 2
- 2~5
- 2～10
- 2～13
- 2.1
- 2.2
- 2.3
- 2.4
- 2.5
- 2.5～5.3
- 2.6
- 2.7
- 2.8
- 2.9
- 3
- 3～14
- 3～15
- 3.1
- 3.15
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.8
- 4
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.8
- 5
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.6
- 5.8
- 6
- 6.2
- 6.3
- 6.3,8.3,10.4,12.4,16.5,20.5
- 6.30/8.30/10.40/12.40/16.50/20.50
- 6.3/8.3/10.4/12.4/16.5/20.5
- 6.35
- 6.4
- 6.5
- 6.6
- 6.8
- 7
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.7
- 7.8
- 8
- 8.2
- 8.3
- 8.4
- 8.5
- 8.8
- 9
- 9.1
- 9.4
- 9.5
- 9.52
- 10
- 10.1
- 10.2
- 10.3
- 10.4
- 10.5
- 10.8
- 11
- 11.1
- 11.2
- 11.4
- 11.5
- 11.88
- 12
- 12.1
- 12.3
- 12.4
- 12.5
- 12.7
- 13
- 13.4
- 13.5
- 14
- 14.2
- 14.4
- 14.5
- 14.6
- 14.8
- 15
- 15.1
- 15.2
- 15.4
- 15.5
- 15.6
- 15.87
- 16
- 16.15
- 16.3
- 16.5
- 16.5,20.5,25.0,37.0
- 17
- 17.1
- 17.7
- 18
- 18.2
- 18.5
- 18.6
- 19
- 19.05
- 19.5
- 20
- 20.5
- 21
- 21.77
- 22
- 22.3
- 22.4
- 22.5
- 23
- 23.4
- 23.5
- 24
- 24.5
- 25
- Max: 25, Min: 4.2
- 25.20
- 25.3
- 26
- 26.5
- 26.6
- 27
- 27.5
- 28
- 28.5
- 29
- 29.9
- 30
- Max: 30, Min: 4
- 30.20
- 30.5
- 31
- Max: 31, Min: 10
- 31.5
- 31.7
- 31.9
- 32
- 32.6
- 32.7
- 33
- 33.1
- 33.3
- 34
- 34.1
- 34.8
- 34.9
- 35
- 35.4
- 35.5
- 35.9
- 36
- 36.9
- 37
- 37.1
- 37.9
- 38
- 39
- 39.83
- 40
- Max: 41, Min: 20
- 42
- 43
- 45
- 45.6
- 46
- 47
- 48
- 49
- 49.85～134.6
- 50
- 50.7
- 51
- 52
- 52.8
- 53
- 53.6
- 53.91
- 54
- 54.3
- 55
- 56
- 56.8
- 57.0
- 57.9
- 58
- 58.2
- 60
- 61.4
- 62
- 62.2
- 63
- 64
- 64.6
- 65
- 66
- 67.4
- 67.94
- 69.2
- 69.8
- 70
- 71.8
- 72
- 73.3
- 74
- 75
- 76
- 80
- 90
- 95
- 100
-
Tip angle (θ)
-
Application
-
work material
-
Single blade, two blades
-
Peripheral Blade Y/N
-
Coating Y/N
-
Coating Type
-
R Size (R)(mm)
- 0.1
- 0.15
- 0.2
- 0.25
- 0.3
- 0.35
- 0.4
- 0.45
- 0.5
- R0.5
- 0.5/1/1.5/2
- 0.5 to 4
- 0.5~5
- 0.55
- 0.6
- 0.65
- 0.7
- 0.75
- R0.75
- 0.8
- 0.85
- 0.9
- 0.95
- 1
- 1RM
- 1RY
- R1
- 1, 1.5
- 1/2/3/4
- 1–3
- 1–5
- 1.05
- 1.1
- 1.15
- 1.2
- 1.25
- R1.25
- 1.3
- 1.35
- 1.4
- 1.45
- 1.5
- R1.5
- 1.55
- 1.6
- 1.65
- 1.7
- 1.75
- 1.8
- 1.85
- 1.9
- 1.95
- 2
- 2RM
- 2RY
- R2
- 2, 3
- 2.05
- 2.1
- 2.15
- 2.2
- 2.25
- 2.3
- 2.35
- 2.4
- 2.45
- 2.5
- R2.5
- 2.6
- 2.7
- 2.75
- 2.8
- 2.9
- 3
- 3RM
- 3RY
- R3
- 3.25
- 3.5
- R3.5
- 3.75
- 4
- 4RM
- 4RY
- R4
- 4.25
- 4.5
- R4.5
- 4.75
- 5
- 5RM
- R5
- 5–10
- 5.25
- 5.5
- 5.75
- 6
- R6
- 6.25
- 6.5
- 6.75
- 7
- R7
- 7.25
- 7.5
- 7.75
- 8
- R8
- 8.25
- 8.5
- 8.75
- 9
- R9
- 9.5
- 10
- R10
- 10.5
- 11
- 11.5
- 12
- R12
- 12.5
- R12.5
- 13
- 13.5
- 14
- 14.5
- 15
- R15
- 15.5
- 16
- R16
- 16.5
- 17
- 17.5
- 18
- 18.5
- 19
- 19.5
- 20
- 20.5
- 21
- 21.5
- 22
- 22.5
- 23
- 23.5
- 24
- 24.5
- 25
- 25.5
- 26
- 26.5
- 27
- 27.5
- 28
- 28.5
- 29
- 29.5
- 30
- XRM
- XRY
Narrow search by specifying Manufacturer
-
- FUJIGEN (59)
- IWATA TOOL (32)
- MAKOTOLOY (22)
- GUHRING (22)
- OSG (17)
- ILIX (12)
- THE_CUT (12)
- DAISHOWASEIKI (7)
- KYOWA SEIKO (7)
- SANKO MFG (7)
- EIKOSHA (6)
- FUKUDA (5)
- OKAZAKI SEIKO (4)
- TRUSCO NAKAYAMA (4)
- YAMAWA MFG (4)
- ASAHI TOOLS (3)
- OKABE (3)
- DAIICHITOOL (2)
- Nine9 (2)
- RUKO (2)
- SANDVIK (2)
- 7 LEADERS (1)
- DIJET (1)
- NOGA_JAPAN (1)
- SPEED TIGER (1)
- UNION TOOL (1)
- RYOCO SEIKI (0)
- SKC (0)
- ESCO (0)
- NIKKENKOSAKU (0)
- STAR-M (0)
- ATI (0)
- MAPAL (0)
- ALPEN (0)
- DIXI (0)
- ATOM (0)
- TAIYO-TOOL (0)
- NS TOOL (0)
CAD
-
- 2D
- 3D
Related Categories to Chamfering / Centering Tools
-
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy