(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
| Days to Ship |
|
|---|

FPTOOLS
[Features]
· The most universally usable reamer among all series of carbide reamers.
· Approximately 5 to 10 times greater durability than conventional HSS reamers, maintaining its precision for long periods of time.
· Processing hole precision is also superior to the HSS reamer, allowing use at higher cutting speed and feeding speed.
· Because the pitch is 0.005 mm, there are no breaks between sizes and negative tolerance hole drilling is also possible.
| Standard Price: | MYR 116.51- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

Short Powerful Carbide Reamer (0.01 mm Jump) CPRSM
OKAZAKI SEIKO
A solid type. The roughing tip ensures uniform removal and stable specification dimensions. Torsional angle 35°
| Standard Price: | MYR 173.41- |
|---|---|
| Days to Ship: | 14 Day(s) |

EIKOSHA
TiCN647 coating adopted. Prevents welding and improves the roughness of the finished surface
| Standard Price: | MYR 258.11- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

Cermet Reamer SD For Stainless Steel Machining
FPTOOLS
[Features]
· Excellent welding resistance, ensuring an outstanding finish when machining stainless steel.
| Standard Price: | MYR 399.79- |
|---|---|
| Days to Ship: | 9 Day(s) or more |

Straight Reamer with Carbide Bottom Blade
MISUMI
[Features]
·Since it has end flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the burnishing function
·Direct reaming is possible without correction by an end mill after drilling a pilot hole
| Standard Price: | MYR 299.73- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

OSG
Cemented carbide is used for the cutting edge material.
·Supply sufficient cutting fluid.
·Use a chuck with high precision.
·It may be necessary to change the conditions depending on the workpiece and the rigidity of the machine.
| Standard Price: | MYR 176.43- |
|---|---|
| Days to Ship: | 5 Day(s) or more |

Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular Model
MISUMI
[Features]
·Since it has end flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the burnishing function
·Direct reaming is possible without correction by an end mill after drilling a pilot hole
| Days to Ship: | 6 Day(s) or more |
|---|

Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long Model
MISUMI
[Features]
·Since it has end flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the burnishing function
·Direct reaming is possible without correction by an end mill after drilling a pilot hole
·Long type allows machining of deep holes
| Days to Ship: | 7 Day(s) or more |
|---|

Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner Radius Model
MISUMI
[Features]
·Since it has end flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the burnishing function
·Direct reaming is possible without correction by an end mill after drilling a pilot hole
| Days to Ship: | 6 Day(s) or more |
|---|

Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long / Corner Radius Model
MISUMI
[Features]
·Since it has end flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the burnishing function
·Direct reaming is possible without correction by an end mill after drilling a pilot hole
·Long type allows machining of deep holes
| Days to Ship: | 7 Day(s) or more |
|---|

Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner C Model
MISUMI
[Features]
·Since it has end flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the burnishing function
·Direct reaming is possible without correction by an end mill after drilling a pilot hole
| Days to Ship: | 6 Day(s) or more |
|---|

Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long / Corner C Model
MISUMI
[Features]
·Since it has end flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the burnishing function
·Direct reaming is possible without correction by an end mill after drilling a pilot hole
·Long type allows machining of deep holes
| Days to Ship: | 7 Day(s) or more |
|---|

Carbide Straight Reamer, Regular Model
MISUMI
[Features]
·Standard carbide straight reamer custom dimensions type
·Custom dimensions can be specified in units of 0.01 mm for cutting diameter and 0.5 mm for flute length
| Days to Ship: | 6 Day(s) or more |
|---|

Carbide Straight Reamer, Long Model
MISUMI
[Features]
·Standard carbide straight reamer custom dimensions type
·Custom dimensions can be specified in units of 0.01 mm for cutting diameter and 0.5 mm for flute length
·Long type allows reaming of deep areas
| Days to Ship: | 7 Day(s) or more |
|---|

Carbide Straight Reamer, Non-Coated / TS Coat for High-Hardness Steel Machining
MISUMI
[Features]
·Carbide material enables high-speed cutting, greatly improving efficiency compared to high-speed steel reamers
·TS coated products are ideal for finishing high hardness steel of 40 HRC or higher (TSC-XHR)
| Standard Price: | MYR 157.41- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

Carbide Precision Straight Reamer
MISUMI
It is capable of finishing holes with clean surface roughness compared to the normal reamer.
| Days to Ship: | 7 Day(s) or more |
|---|

Carbide Pilot Hole Correction Boring Bit
MISUMI
In case the hole pitch has an intersection or the inclination tolerance of the hole is demanding.
By using it before finishing the reamer, the bend of the hole can be modified.
| Days to Ship: | 7 Day(s) or more |
|---|

MISUMI
[Features]
·Unique cutting edge shape enables drilling of various work materials such as stainless steel and aluminum alloy
·Drilling is possible under cutting conditions of 60 m/min or more
·Compatible with various applications such as hole finishing and high-precision thread pilot hole drilling
·It can be used for hole finishing because it achieves the same dimensional accuracy and surface roughness accuracy as boring and reaming
·Ideal for pilot hole drilling of high-precision thread with high percentage of thread engagement
·Possesses the ability to correct variations in pilot hole diameters, enabling improved hole position accuracy
| Standard Price: | MYR 542.03- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

Carbide Step Reamer, Custom Dimensions / Long Shank Type
MISUMI
[Features]
·2-stage hole drilling in 2 processes can be performed with 1 tool while keeping the coaxial
·Large diameter can also be specified in addition to tip diameter, stepped length, and chamfer angle
·Machining according to the shape of product, such as parts machining, is possible
| Days to Ship: | 6 Day(s) or more |
|---|

Carbide Step Reamer, Custom Dimensions Type
MISUMI
[Features]
·2-stage hole drilling in 2 processes can be performed with 1 tool while keeping the coaxial
·Large diameter can also be specified in addition to tip diameter, stepped length, and chamfer angle
·Machining according to the shape of product, such as parts machining, is possible
| Days to Ship: | 6 Day(s) or more |
|---|

DLC Carbide Solid Reamer for Aluminum CSR-DLC
EIKOSHA
DLC coating with low coefficient of friction adopted, for aluminum and nonferrous metals
| Standard Price: | MYR 432.32- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

FPTOOLS
[Features]
· Easy tool management: As well as being suitable for high-precision drilling as the nominal dimensions are manufactured with 1 μm increments, 11,800 sizes are available for selection.
· Ultra-high precision: Tolerance of 0 to less than +1 μm is ideal for drilling ultra-precision holes.
· High durability: Excellent durability, maintaining precision over long periods of time.
· Application: General work materials.
| Standard Price: | MYR 280.33- |
|---|---|
| Days to Ship: | 5 Day(s) or more |

FPTOOLS
[Features]
· Ultra-low price contributes to cost reductions.
· Carbide is used for the reamer, greatly reducing the price.
· It will help reduce the machining costs by the improvement of tool life and reduction of tool costs.
· Deep hole machining possible: Thinner shank diameter makes it possible to machine deep holes.
· The processing range can be expanded.
· High-precision: Precision equivalent to the best-selling carbide reamer "G-Series".
· Can be used with peace of mind
| Standard Price: | MYR 162.33- |
|---|---|
| Days to Ship: | 5 Day(s) or more |
| Standard Price: | MYR 701.91- |
|---|---|
| Days to Ship: | 9 Day(s) or more |
| Standard Price: | MYR 841.03- |
|---|---|
| Days to Ship: | 9 Day(s) or more |
| Standard Price: | MYR 1,704.24 |
|---|---|
| Days to Ship: | 10 Day(s) |
| Standard Price: | MYR 1,165.83- |
|---|---|
| Days to Ship: | 10 Day(s) |

Powerful Carbide Reamer Hundredths (0.01 mm Jump) CPRM
OKAZAKI SEIKO
A solid type. The roughing tip ensures uniform removal and stable specification dimensions. Torsional angle 45°
| Standard Price: | MYR 326.88- |
|---|---|
| Days to Ship: | 14 Day(s) |

Carbide Solid Reamer Shank-Through Coolant CSGR-A
EIKOSHA
[Features]
· The cutting speed is approximately 2.5 times that of conventional coating reamers.
· The pinpoint lubrication improves the weld resistance and machined surface roughness
| Standard Price: | MYR 937.01- |
|---|---|
| Days to Ship: | 8 Day(s) or more |

Carbide Solid Reamer Shank-Through Coolant CSGR-DLC
EIKOSHA
[Features]
· Exhibits excellent weld resistance with aluminum, non-ferrous metal, etc.
· Thin film that does not impair machinability.
| Standard Price: | MYR 1,093.14- |
|---|---|
| Days to Ship: | 8 Day(s) or more |

OKAZAKI SEIKO
[Features]
・ For hole finishing machining of cast iron and general steel
・ MCO material (cobalt HSS) is used
| Standard Price: | MYR 182.08- |
|---|---|
| Days to Ship: | 14 Day(s) |

Carbide Chucking Reamer CCRFM (OK Tough Coat)
OKAZAKI SEIKO
[Features]
・ OK Tough Coat realizes high speed machining and long life
・ Solid type
・ Capable of deep hole machining thanks to a neck diameter thinner than the blade diameter
| Standard Price: | MYR 200.45- |
|---|---|
| Days to Ship: | 13 Day(s) or more |

Carbide Hard Reamer CKRH/CKRHM
OKAZAKI SEIKO
[Features]
・ OK Hard Coat enables high speed cutting of difficult-to-cut materials such as high-hardness materials and heat-resistant alloys.
・Can be used to machine high-hardness materials of up to HRC62.
| Standard Price: | MYR 322.46- |
|---|---|
| Days to Ship: | 14 Day(s) |

Carbide Powerful Reamer CPRFM (OK Tough Coat)
OKAZAKI SEIKO
[Features]
・OKTough Coat realizes high speed machining and long life
・ Solid type
・The finishing dimensions are stabilized thanks to the uniform cutting margin achieved by the rough cutting edge at the tip
・ Torsion angle 45°
| Standard Price: | MYR 405.38- |
|---|---|
| Days to Ship: | 13 Day(s) or more |

Carbide Short Powerful Reamer CPRSFM (OK Tough Coat)
OKAZAKI SEIKO
[Features]
・OKTough Coat realizes high speed machining and long life
・ Solid type
・ The finishing dimensions are stabilized thanks to the uniform cutting margin achieved by the rough cutting edge at the tip
・ Torsion angle 35°
| Standard Price: | MYR 208.46- |
|---|---|
| Days to Ship: | 13 Day(s) or more |

Carbide Short Reamer CSRFM (OK Tough Coat)
OKAZAKI SEIKO
[Features]
・ OK Tough Coat realizes high speed machining and long life
・ Solid type
| Standard Price: | MYR 234.75- |
|---|---|
| Days to Ship: | 14 Day(s) |

TRUSCO NAKAYAMA
[Features]
· A general-purpose reamer that can be used in the same way as a hand reamer.
Supports high-speed rotation unlike a high-speed steel hand reamer, is highly durable, and can be used for difficult-to-cut materials.
Can also be used at a higher cutting speed and feed rate.
Allows rough surfaces within holes to be given a clean finish.
Also enables the machining of workpieces with a hardness of HRC 50 to 60.
Offers excellent durability.
| Standard Price: | MYR 286.83 |
|---|---|
| Days to Ship: | 9 Day(s) or more |
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Tool Diameter(mm) |
| Groove Length(mm) |
| work material |
| Shank Type |
| Coating Y/N |
| Groove Shape |
| Base Blade Y/N |
| Tip diameter |
| Large End Diameter |
| Brand | FPTOOLS | OKAZAKI SEIKO | EIKOSHA | FPTOOLS | MISUMI | OSG | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | EIKOSHA | FPTOOLS | FPTOOLS | OMIKOGYO | OMIKOGYO | OMIKOGYO | OMIKOGYO | OKAZAKI SEIKO | EIKOSHA | EIKOSHA | OKAZAKI SEIKO | OKAZAKI SEIKO | OKAZAKI SEIKO | OKAZAKI SEIKO | OKAZAKI SEIKO | OKAZAKI SEIKO | TRUSCO NAKAYAMA |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Product Series | Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular Model | Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long Model | Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner Radius Model | Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long / Corner Radius Model | Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner C Model | Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long / Corner C Model | Carbide Straight Reamer, Non-Coated / TS Coat for High-Hardness Steel Machining | ||||||||||||||||||||||||||||||
| CAD |
| ||||||||||||||||||||||||||||||||||||
| Days to Ship | 4 Day(s) or more | 14 Day(s) | 4 Day(s) or more | 9 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 4 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 10 Day(s) | 10 Day(s) | 14 Day(s) | 8 Day(s) or more | 8 Day(s) or more | 14 Day(s) | 13 Day(s) or more | 14 Day(s) | 13 Day(s) or more | 13 Day(s) or more | 14 Day(s) | 9 Day(s) or more |
| Tool Diameter(mm) | 0.2 ~ 12.1 | 2.95 ~ 12.05 | 0.8 ~ 12.05 | 2.985 ~ 10.025 | 3 ~ 10.01 | 0.3 ~ 13.05 | 0.3 ~ 15.995 | 0.3 ~ 5.995 | 0.4 ~ 15.995 | 0.4 ~ 5.995 | 0.4 ~ 15.995 | 0.4 ~ 5.995 | 0.3 ~ 15.99 | 0.3 ~ 5.99 | 1 ~ 10 | 0.5 ~ 5.9 | 1.8 ~ 5 | 2 ~ 10 | - | - | 0.5 ~ 12.05 | 0.5 ~ 10.009 | 2.91 ~ 12.1 | 1 ~ 30 | 3 ~ 30 | 10 | 4 ~ 13.99 | 2.95 ~ 12.05 | 2.97 ~ 20.03 | 12 | 1 ~ 2 | 2.95 ~ 2.96 | 2.95 ~ 12 | 2.95 ~ 2.96 | 2.95 ~ 2.96 | 2.95 ~ 2.96 | 1 ~ 1.3 |
| Groove Length(mm) | 3 ~ 45 | 22 ~ 35 | 12 ~ 45 | 12 ~ 24 | 27 ~ 40 | - | 0.5 ~ 48 | 0.5 ~ 34 | 0.5 ~ 48 | 0.5 ~ 34 | 0.5 ~ 48 | 0.5 ~ 34 | 0.5 ~ 48 | 0.5 ~ 34 | 12 ~ 40 | 3 ~ 10 | - | 12 ~ 52 | - | - | 6 ~ 45 | 5 ~ 40 | 20 ~ 25 | 10 ~ 110 | 55 ~ 160 | 55 | 55 ~ 115 | 20 ~ 31 | 19 ~ 25 | 19 ~ 25 | 30 | 26 ~ 31 | - | 26 ~ 31 | 30 | 27 ~ 30 | - |
| work material | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[◎] / Alloy Steel[◎] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Alloy Steel[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[◎] / Heat-resistant alloy[○] / Alloy Steel[◎] | Stainless Steel[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○/◎] / Quenched and tempered steel[○/◎] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | general steel[◎] / Aluminum[◎] | general steel[◎] / Aluminum[◎] | Cast Iron[○] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[◎] / Alloy Steel[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[◎] / Alloy Steel[◎] | Cast Iron[○] / Aluminum[◎] / Copper[○] | Cast Iron[○] / Aluminum[◎] / Copper[○] | Cast Iron[○] / Aluminum[◎] / Copper[○] | Cast Iron[○] / Aluminum[◎] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Alloy Steel[○] | general steel[○] / Quenched and tempered steel[○] / Aluminum[○] / Copper[○] / Alloy Steel[○] | Aluminum[○] / Copper[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Die Steel[◎] / Alloy Steel[◎] | general steel[○] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[◎] / Die Steel[○] / Alloy Steel[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Die Steel[◎] / Alloy Steel[◎] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Die Steel[◎] / Alloy Steel[◎] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Die Steel[◎] / Alloy Steel[◎] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Alloy Steel[○] |
| Shank Type | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank |
| Coating Y/N | NA | NA | Available | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | Available ~ NA | NA | NA | Available | NA | NA | Available | NA | NA | NA | NA | NA | NA | NA | Available | Available | NA | Available | Available | Available | Available | Available | NA |
| Groove Shape | Straight | Helical | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Helical | Straight | Straight | Straight | Straight | Spiral | Spiral | Spiral | Straight | Straight |
| Base Blade Y/N | NA | NA | NA | NA | Available | NA | Available | Available | Available | Available | Available | Available | NA | NA | NA | NA | NA | NA | - | - | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | - |
| Tip diameter | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Large End Diameter | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
[1.8-5/0.1mm Unit(s)][0.3-15.99/0.01mm Unit(s)][0.3-15.995/0.005mm Unit(s)]
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy