(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
| Days to Ship |
|
|---|

FPTOOLS
[Features]
· Cutting speed can be increased by 50% compared to carbide straight blade types.
· Ideal for deep drilling: Long neck section.
· Excellent anterior chip discharge: 30° torsion, left
| Standard Price: | MYR 392.70- |
|---|---|
| Days to Ship: | 5 Day(s) or more |

FPTOOLS
[Features]
· The most universally usable reamer among all series of carbide reamers.
· Approximately 5 to 10 times greater durability than conventional HSS reamers, maintaining its precision for long periods of time.
· Processing hole precision is also superior to the HSS reamer, allowing use at higher cutting speed and feeding speed.
· Because the pitch is 0.005 mm, there are no breaks between sizes and negative tolerance hole drilling is also possible.
| Standard Price: | MYR 116.51- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

FPTOOLS
[Features]
· Easy tool management: As well as being suitable for high-precision drilling as the nominal dimensions are manufactured with 1 μm increments, 11,800 sizes are available for selection.
· Ultra-high precision: Tolerance of 0 to less than +1 μm is ideal for drilling ultra-precision holes.
· High durability: Excellent durability, maintaining precision over long periods of time.
· Application: General work materials.
| Standard Price: | MYR 280.33- |
|---|---|
| Days to Ship: | 5 Day(s) or more |

FPTOOLS
[Features]
It is possible to mirror-finish drilled hole of general steel, and it is possible to drill without following pilot hole.
| Standard Price: | MYR 202.24- |
|---|---|
| Days to Ship: | 5 Day(s) or more |

FPTOOLS
[Features]
· Ultra-low price contributes to cost reductions.
· Carbide is used for the reamer, greatly reducing the price.
· It will help reduce the machining costs by the improvement of tool life and reduction of tool costs.
· Deep hole machining possible: Thinner shank diameter makes it possible to machine deep holes.
· The processing range can be expanded.
· High-precision: Precision equivalent to the best-selling carbide reamer "G-Series".
· Can be used with peace of mind
| Standard Price: | MYR 162.33- |
|---|---|
| Days to Ship: | 5 Day(s) or more |

KYOWA SEIKO
Lineup of bits for small diameter hole finish machining from φ0.5 to φ2.03 in 0.01 increments.
| Standard Price: | MYR 251.54 |
|---|---|
| Days to Ship: | 6 Day(s) or more |

Carbide Reamer with End Blade Edge KHR-4
KYOWA SEIKO
[Applications]It can be used for cutting general steel, heat-treated steel, stainless steel, cast iron, aluminum, titanium, copper, and resin. [Features]Fine particle alloy K10 with well-balanced hardness and transverse rupture strength is used.
| Standard Price: | MYR 436.64- |
|---|---|
| Days to Ship: | 5 Day(s) or more |

Carbide Reamer with End Blade Edge KHRA-4
KYOWA SEIKO
[Applications]It can be used for cutting general steel, heat-treated steel, stainless steel, cast iron, aluminum, titanium, copper, and resin. [Features]There are 3 blade shapes: spiral, helical, and broach.
| Standard Price: | MYR 501.21- |
|---|---|
| Days to Ship: | 6 Day(s) or more |

Carbide Reamer For Automatic Lathes CNCR-C
EIKOSHA
[Features]
·Short type suitable for precision automatic lathe machining
Flute shape: Spiral/helical/broach
Work material: General steel / heat-treated steel / stainless steel / cast iron / aluminum / copper / graphite / resin
With or without coating / surface treatment: uncoated
Cutting diameter tolerance (mm): 0 to +0.005
Helix angle (°): 7°
Shank diameter tolerance: h7
Work material details: Steel alloy, compliant / die steel, compliant
Groove shape: Spiral
Shank type: End mill shank
| Standard Price: | MYR 268.95- |
|---|---|
| Days to Ship: | 8 Day(s) or more |
| Brand |
|---|
| Product Series |
| Days to Ship |
| Tool Diameter(mm) |
| Groove Length(mm) |
| work material |
| Shank Type |
| Coating Y/N |
| Groove Shape |
| Base Blade Y/N |
| Tip diameter |
| Large End Diameter |
| radius R |
| Both square |
| Brand | FPTOOLS | FPTOOLS | FPTOOLS | FPTOOLS | FPTOOLS | KYOWA SEIKO | KYOWA SEIKO | KYOWA SEIKO | EIKOSHA |
|---|---|---|---|---|---|---|---|---|---|
| Product Series | |||||||||
| Days to Ship | 5 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 8 Day(s) or more |
| Tool Diameter(mm) | 1 ~ 15.5 | 0.2 ~ 12.1 | 0.5 ~ 10.009 | 0.9 ~ 14 | 2.91 ~ 12.1 | 2.03 | 1 ~ 6.03 | 1 ~ 6.03 | 0.97 ~ 12.05 |
| Groove Length(mm) | 8 ~ 45 | 3 ~ 45 | 5 ~ 40 | 20 ~ 70 | 20 ~ 25 | - | - | - | 12 ~ 30 |
| work material | Resin[○] | Resin[○] | Resin[○] | Resin[○] | Resin[○] | Resin[○] | Resin[○] | Resin[○] | Resin[○] |
| Shank Type | End Mill Shank | End Mill Shank | End Mill Shank | straight shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank |
| Coating Y/N | NA | NA | NA | NA | NA | NA | NA | Available | NA |
| Groove Shape | Spiral | Straight | Straight | Straight | Straight | Spiral | Spiral | Spiral | Spiral |
| Base Blade Y/N | NA | NA | NA | NA | NA | - | Available | Available | - |
| Tip diameter | - | - | - | - | - | - | - | - | - |
| Large End Diameter | - | - | - | - | - | - | - | - | - |
| radius R | - | - | - | - | - | - | - | - | - |
| Both square | - | - | - | - | - | - | - | - | - |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy