(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Hand Taps（work material：Aluminum Alloy Casting (AC, ADC)）
[What is a hand tap?]
It is the most versatile cutting tap, usable for both "blind holes and through holes", with straight grooves taking into consideration storage of chips. It is mainly used for thread cutting in tapping drilling machines and tap handles. Tap types include front (1, 9 P) tap, middle (2, 5 P) tap, and upper (3, 1.5 P) tap depending on the length (number of teeth) of the biting part. There are two types of materials, mainly HSS (= high speed steel) and carbide: HSS is tough and hard to break and carbide is abrasion resistant.
| Days to Ship |
|
|---|
-
Hand Taps_HT【1-146 Pieces Per Package】
YAMAWA MFG
Hand tap used for general tapping work.
[Features]
・ High blade tip strength makes it easy for regrinding.
・ More suitable for manual work compared to taps of other shapes.
・ 2 types are available, with 5P or 1.5P chamfered threads.
・ When machining a blind hole manually, finish machining with 1.5P is recommended after first machining with 5P.
・ Machining with mechanical machinery is also possible.
・ Has straight grooves out of consideration for cutting chip stow.
・ Suitable for work materials whose cutting chips are powder or small coiled close to the powder.
[Applications]
・ Ideal for threading SPC/SPH and other thin plates or SS400/S20 or below mild steel.Standard Price: MYR 39.97- Days to Ship: 1 Day(s) or more -
Hand Taps for Die Cast Materials_LA-HT
YAMAWA MFG
[Features]
· An oversize tap suitable for female thread cutting in materials that tend to contract, such as aluminum alloy diecast (ADC) and zinc alloy diecast (ZDC).Standard Price: MYR 67.37- Days to Ship: 8 Day(s) or more -
OSG
High-speed steel hand tap.
Work material: Magnesium alloy casting (MC) compatible / zinc alloy casting (ZDC) compatibleStandard Price: MYR 48.84- Days to Ship: 5 Day(s) or more -
Hand Taps for Left Hand Threads_HT-LH【1-151 Pieces Per Package】
YAMAWA MFG
It is suitable for threading for simple installation used for thin steel plates such as SPC and SPH and mild steel of SS400, S20 or less.
Standard Price: MYR 53.46- Days to Ship: 5 Day(s) or more -
SKC
[Applications]
It can be used for machining larger diameter threaded holes than usual in plating and heat treatment processes.
[Features]
High speed steel with excellent heat resistance and thermal damage resistance is used.Standard Price: MYR 79.52- Days to Ship: 6 Day(s) or more -
Hand Tap for General Use Long Shank EX-LT
OSG
Long shank type.
Tool Material: Vanadium high-speed steel
Work material: general steel / cast iron / aluminum / copperStandard Price: MYR 162.21- Days to Ship: 5 Day(s) or more -
Hand Tap Set (for Metric Screws/SKS)
TRUSCO NAKAYAMA
[Features]
· Use when manufacturing or cleaning out screw holes.
· For coarse screw thread ridge repair and manufacture.
· A tungsten hand tap set.
[Applications]
· Work materials: Iron, light metal.
· Creation and correction of coarse screw threads.Standard Price: MYR 61.23- Days to Ship: 5 Day(s) or more -
Long Shank Hand Taps_LS-HT【1-159 Pieces Per Package】
YAMAWA MFG
It is suitable for threading for simple installation used for thin steel plates such as SPC and SPH and mild steel of SS400, S20 or less.
Days to Ship: 7 Day(s) or more -
Hexagonal Shank Tapping Drill (TiN Coating)
RUKO
[Features]
· Hexagonal shaft shank design enables mounting to cordless screwdriver.
· Enables hole punching and thread cutting work in iron plate, etc., without having to replace the drill.
[Applications]
· For drilling and creating/repairing screw threads.
· Work materials: Iron, aluminum, copper, stainless steel.Standard Price: MYR 177.88- Days to Ship: 8 Day(s) or more -
Hand Tap Set (for Whitworth Screws / SKS)【1-3 Pieces Per Package】
TRUSCO NAKAYAMA
[Features]
· For creating and refining (making clean) screw holes.
· For creating and modifying screw threads.
· Tungsten hand tap set.
[Applications]
· Work materials: iron, light metals.Standard Price: MYR 93.49- Days to Ship: 9 Day(s) -
Hand Tap Set (for Unified Screw Threads / Fine Type) 【3 Pieces Per Package】
TRUSCO NAKAYAMA
[Features]
· For creating and refining (making clean) screw holes.
· For creating and modifying screw threads.
[Applications]
· Work materials: iron, light metals.Standard Price: MYR 142.10- Days to Ship: 5 Day(s) or more -
YAMAWA MFG
[Features]
· A common tap that's used in various applications.Standard Price: MYR 1,252.49- Days to Ship: 9 Day(s) -
Hand Taps for Aluminum Materials (for Helical Coil Wire Screw Thread Inserts)_AL-HT-STI
YAMAWA MFG
Hand tap for machining female threads for inserting insert coils.
[Features]
· Blade designed to be ideal for aluminum type work materials, enabling stable female thread machining to be performed.
· 2 types are available, with 5P or 1.5P biting threads, to suit the application used.
· Screw precision in accordance with class 1b.
· Work material: Aluminum rolled material, aluminum alloy casting, zinc alloy casting.
[Applications]
Ideal for machining female threads for inserting insert coils after threading.Standard Price: MYR 93.33- Days to Ship: 8 Day(s) or more -
Straight Flutes Insert Screw Thread Tap_HL-HT
OSG
Used for thread tapping of female threads by inserting the helical coil. Compared to ordinary taps of the same nominal size, the outer diameter is made larger according to the size of the insert even though the pitch is the same.
Standard Price: MYR 71.38 Days to Ship: 5 Day(s) or more -
Straight Flutes Tap TiN coated_TIN-HT
OSG
Excellent cutting edge strength is suitable for high hardness materials where the chippings don't stay connected.
Standard Price: MYR 115.81- Days to Ship: 7 Day(s) or more -
Tungsten Carbide Straight Flutes Tap for Die Castings_OT-DC-HT
OSG
Ideal for tapping aluminum alloy castings, etc. in large quantities with high precision automatic machines, etc.
Standard Price: MYR 394.98- Days to Ship: 5 Day(s) or more -
Tungsten Carbide Straight Flutes Tap_OTT
OSG
Ideal for tapping large amounts of ordinary cast iron, high-rigidity cast iron, thermosetting resin, brass cast iron, etc., using a high-precision automatic machine.
Standard Price: MYR 358.52- Days to Ship: 5 Day(s) or more -
Tungsten Carbide Straight Flutes Tap with Long Shank_LT-OTT
OSG
Ideal for tapping large amounts of ordinary cast iron, high-rigidity cast iron, thermosetting resin, brass cast iron, etc., using a high-precision automatic machine.
Standard Price: MYR 661.10- Days to Ship: 5 Day(s) or more -
Hand Tap (for Metric Screws/SKS)
TRUSCO NAKAYAMA
[Features]
· Use when manufacturing or cleaning out screw holes.
· For coarse screw thread ridge repair and manufacture.
[Applications]
· Work materials: Iron, light metal.
· Creation and correction of coarse screw threads.Standard Price: MYR 25.09- Days to Ship: 5 Day(s) or more -
YAMAWA MFG
The blade shape adopted is less prone to damage during machining of aluminum alloy castings, etc. Achieves a longer life.
Standard Price: MYR 208.45- Days to Ship: 9 Day(s) -
Hand Taps with Short Chamfer for Magnesium Alloy Castings_MG-HT
YAMAWA MFG
There is less than 1 chamfer thread, making it ideal for blind holes without any spare depth in the pilot hole.
Standard Price: MYR 91.63- Days to Ship: 8 Day(s) or more -
Long Shank Hand Taps, Coated_LS-HT-V
YAMAWA MFG
■ Long shank coated hand taps for tappingthreads in deep holes that cannot be reachedwith a standard overall length.
Standard Price: MYR 299.24- Days to Ship: 8 Day(s) or more -
Long Shank Hand Taps for Left Hand Threads_LS-HT-LH
YAMAWA MFG
■ Long shank hand taps for tapping left-handthreads in deep holes that cannot be reachedwith a standard overall length.
Standard Price: MYR 223.75- Days to Ship: 8 Day(s) or more -
Carbide Taps for Light Alloys_N-CT-LA
YAMAWA MFG
A carbide tap suitable for thread cutting with aluminum casting (AC), aluminum die castings (ADC), zinc die castings (ZDC), etc.
Standard Price: MYR 364.11- Days to Ship: 6 Day(s) or more -
Hand Tap (for Whitworth Screw Thread / SKS)
TRUSCO NAKAYAMA
· For creating and refining (making clean) screw holes. · For creating and modifying screw threads. · Iron and light metal.
Standard Price: MYR 34.53- Days to Ship: 5 Day(s) or more -
RUKO
[Features]
· Hexagonal shaft shank design enables mounting to cordless screwdriver.
· Enables hole punching and thread cutting work in iron plate, etc., without having to replace the drill.
[Applications]
· For drilling and creating/repairing screw threads.
· Work materials: Iron, aluminum, copper.Standard Price: MYR 142.63- Days to Ship: 8 Day(s) or more -
Hand Tap (for Unified Screw Threads / Fine Type)
TRUSCO NAKAYAMA
[Features]
· For creating and refining (making clean) screw holes.
· For creating and modifying screw threads.
[Applications]
· Work materials: iron, light metals.Standard Price: MYR 47.21- Days to Ship: 9 Day(s) -
Hand Tap (for Unified Screw Threads / Coarse Type)
TRUSCO NAKAYAMA
[Features]
· For creating and refining (making clean) screw holes.
· For creating and modifying screw threads.
[Applications]
· Work materials: iron, light metals.Standard Price: MYR 47.21- Days to Ship: 5 Day(s) or more -
Hand Tap Set (for Unified Screw Threads / Coarse Type) 【3 Pieces Per Package】
TRUSCO NAKAYAMA
[Features]
· For creating and refining (making clean) screw holes.
· For creating and modifying screw threads.
[Applications]
· Work materials: iron, light metals.Standard Price: MYR 142.10- Days to Ship: 5 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Screw size (Nominal) |
| Screw Types |
| work material |
| Pitch (P), Number of Threading(mm) |
| Tool Material Type |
| Tap Type |
| Hole type |
| Chamfer threads (Lcf) |
| Coating Type |
| Coating Y/N |
| Overall Length (L)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | YAMAWA MFG | YAMAWA MFG | OSG | YAMAWA MFG | SKC | OSG | TRUSCO NAKAYAMA | YAMAWA MFG | RUKO | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | YAMAWA MFG | YAMAWA MFG | OSG | OSG | OSG | OSG | OSG | TRUSCO NAKAYAMA | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | TRUSCO NAKAYAMA | RUKO | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA |
| Product Series | Hand Taps for Left Hand Threads_HT-LH【1-151 Pieces Per Package】 | Hand Tap Set (for Whitworth Screws / SKS)【1-3 Pieces Per Package】 | Hand Tap Set (for Unified Screw Threads / Fine Type) 【3 Pieces Per Package】 | Hand Taps for Aluminum Materials (for Helical Coil Wire Screw Thread Inserts)_AL-HT-STI | Tungsten Carbide Straight Flutes Tap for Die Castings_OT-DC-HT | Hand Taps with Short Chamfer for Magnesium Alloy Castings_MG-HT | Hand Tap Set (for Unified Screw Threads / Coarse Type) 【3 Pieces Per Package】 | ||||||||||||||||||||||
| CAD |
|
|
|
|
|
| |||||||||||||||||||||||
| Days to Ship | 1 Day(s) or more | 8 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 8 Day(s) or more | 9 Day(s) | 5 Day(s) or more | 9 Day(s) | 8 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 9 Day(s) | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 8 Day(s) or more | 9 Day(s) | 5 Day(s) or more | 5 Day(s) or more |
| Screw size (Nominal) | No.0 ～ M48 | M1.4 ～ M16 | No.4UN ～ M35 | M1 ～ M30 | M6 ～ M12 | 3/8UN ～ M12 | M2 ～ M16 | 1 ～ M48 | M3 ～ M10 | W1 ～ W7/8 | UNF1 ～ UNF7/16 | M33 ～ M48 | No.10 ～ M24 | No.8UN | M2 ～ M24 | M3 ～ M12 | M1.4 ～ M20 | M3 ～ M20 | M2 ～ M16 | M6 ～ M12 | M1.4 ～ M3 | M8 ～ M12 | M8 ～ M30 | M1.4 ～ M20 | W1 ～ W7/8 | M3 ～ M10 | UNF1 ～ UNF7/16 | UNC1 ～ UNC7/16 | UNC1 ～ UNC7/16 |
| Screw Types | Meter / unified / Sewing Machine | Meter | Meter / unified / Sewing Machine | Meter | Meter | Meter / unified | Meter | Meter / unified | Meter | Whitworth | unified | Meter | Meter / unified | unified | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Whitworth | Meter | unified | unified | unified |
| work material | Aluminum Alloy Casting (AC, ADC)[○] | Aluminum Alloy Casting (AC, ADC)[◎] | Aluminum Alloy Casting (AC, ADC)[○] | Aluminum Alloy Casting (AC, ADC)[○] | Aluminum Alloy Casting (AC, ADC)[○] | Aluminum Alloy Casting (AC, ADC)[○] | Aluminum Alloy Casting (AC, ADC)[○] | Aluminum Alloy Casting (AC, ADC)[○] | Aluminum Alloy Casting (AC, ADC)[○] | Aluminum Alloy Casting (AC, ADC)[○] | Aluminum Alloy Casting (AC, ADC)[○] | Aluminum Alloy Casting (AC, ADC)[○] | Aluminum Alloy Casting (AC, ADC)[◎] | Aluminum Alloy Casting (AC, ADC)[○] | Aluminum Alloy Casting (AC, ADC)[○] | Aluminum Alloy Casting (AC, ADC)[◎] | Aluminum Alloy Casting (AC, ADC)[○] | Aluminum Alloy Casting (AC, ADC)[○] | Aluminum Alloy Casting (AC, ADC)[○] | Aluminum Alloy Casting (AC, ADC)[○] | Aluminum Alloy Casting (AC, ADC)[○] | Aluminum Alloy Casting (AC, ADC)[○] | Aluminum Alloy Casting (AC, ADC)[○] | Aluminum Alloy Casting (AC, ADC)[○] | Aluminum Alloy Casting (AC, ADC)[○] | Aluminum Alloy Casting (AC, ADC)[○] | Aluminum Alloy Casting (AC, ADC)[○] | Aluminum Alloy Casting (AC, ADC)[○] | Aluminum Alloy Casting (AC, ADC)[○] |
| Pitch (P), Number of Threading(mm) | 0.2 ～ 100 | 0.3 ～ 2 | 0.75 ～ 40 | 0.25 ～ 3.5 | 1 ～ 1.75 | 1.25 ～ 16 | 0.4 ～ 2 | 1 ～ 24 | 0.5 ～ 1.5 | 12 ～ 40 | - | 3.5 ～ 5 | 0.45 ～ 48 | 32 | 0.4 ～ 3 | 0.5 ～ 1.75 | 0.3 ～ 2.5 | 0.5 ～ 2.5 | 0.4 ～ 2 | 1 ～ 1.75 | 0.3 ～ 0.5 | 1.25 ～ 1.75 | 1.25 ～ 3.5 | 0.3 ～ 2.5 | - | 0.5 ～ 1.5 | - | - | - |
| Tool Material Type | High-speed steel | High-speed steel | High-speed steel | High-speed steel | - | Vanadium High-Speed Steel | Alloy HSS | High-speed steel | High-speed steel | Alloy HSS / SKS | SKS | High-speed steel | High-speed steel | High-speed steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Carbide | Carbide | Alloy HSS | Powder high-speed steel | High-speed steel | High-speed steel | High-speed steel | Carbide | Alloy HSS / SKS | High-speed steel | SKS | SKS | SKS |
| Tap Type | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap |
| Hole type | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | - | For through hole / For blind hole | - | For through hole / For blind hole | For through hole / For blind hole | For through hole | For through hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | - | For through hole / For blind hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | - | For through hole / For blind hole | For through hole | For through hole | For through hole |
| Chamfer threads (Lcf) | 1.5P ～ 5P | 1.5P ～ 5P | 1.5P ～ 9P | 1.5P ～ 5P | 5P ～ 9P | 1.5P ～ 5P | - | 1.5P ～ 5P | - | - | 12P ～ 28P | 1.5P ～ 5P | 1.5P ～ 5P | 5P | 1.5P ～ 5P | 1.5P | 1.5P ～ 3P | 1.5P ～ 3P | 1.5P ～ 9P | 1.5P | 1P | 1.5P ～ 5P | 1.5P ～ 5P | 1.5P ～ 5P | - | - | 12P ～ 28P | 8P ～ 20P | 8P ～ 20P |
| Coating Type | - | Nitriding Treatment | Non-Coated | - | - | Non-Coated | Non-Coated | - | TiN | - | - | - | Non-Coated | Non-Coated | TiN | Non-Coated | Non-Coated | Non-Coated | Non-Coated | TiN | - | TiN | - | - | - | Non-Coated | - | - | - |
| Coating Y/N | NA | Available | NA | NA | - | NA | NA | NA | Available | NA | NA | NA | NA | NA | Available | NA | NA | NA | NA | Available | NA | Available | NA | NA | NA | NA | NA | NA | NA |
| Overall Length (L)(mm) | 32 ～ 185 | 36 ～ 95 | 44 ～ 115 | 36 ～ 135 | 62 ～ 82 | 150 | 40 ～ 95 | 100 ～ 300 | 51 ～ 75 | 95 ～ 125 | 62 ～ 125 | 145 ～ 185 | 52 ～ 135 | 60 | 40 ～ 120 | 46 ～ 82 | 34 ～ 105 | 100 ～ 150 | 40 ～ 95 | 62 ～ 82 | 36 ～ 46 | 100 ～ 150 | 100 ～ 200 | 34 ～ 105 | 46 ～ 125 | 51 ～ 75 | 62 ～ 125 | 62 ～ 125 | 62 ～ 125 |
Loading...
Configure
Specification/Dimensions
-
Screw size (Nominal)
- No.0
- No.10
- No.1
- No.10-32UNF
- No.10-24UNC
- No.12
- No.2
- No.3
- No.4
- No.4UN
- No.4-48UNF
- No.4-40UNC
- No.5
- No.5-40UNC
- No.6
- No.6-32UNC
- No.8
- No.8UN
- No.8-32UNC
- 1
- M1
- PS 1
- UNC1
- UNF1
- W1
- 1 1/2
- PS 1 1/2
- 1 1/4
- PS 1 1/4
- 1"1/16UN
- 1/2
- PS 1/2
- UNC1/2
- UNF1/2
- W1/2
- 1/2-20UNF
- 1/2-13UNC
- 1/2W12
- 1 3/4
- 1 3/8
- 1/4
- 1/4UN
- UNC1/4
- UNF1/4
- W1/4
- 1/4-28UNF
- 1/4-20UNC
- 1/4W20
- 1 7/16
- 1/8
- PS 1/8
- W1/8
- 1 9/16
- 1/16
- M1.1
- M1.2
- 1.29
- 1.37
- M1.4
- 1.45
- M1.6
- M1.7
- M1.8
- M2
- M2.0
- M2.2
- M2.3
- M2.5
- M2.6
- M3
- M3.0
- 3/4
- PS 3/4
- UNC3/4
- UNF3/4
- W3/4
- 3/4-16UNF
- 3/4-10UNC
- 3/4W10
- 3/8
- 3/8UN
- UNC3/8
- UNF3/8
- W3/8
- 3/8-24UNF
- 3/8-16UNC
- 3/8W16
- 3/16
- W3/16
- 3/32
- M3.5
- M4
- M4.0
- M4.5
- 5
- M5
- M5.0
- 5/8
- UNC5/8
- UNF5/8
- W5/8
- 5/8-18UNF
- 5/8-11UNC
- 5/8W11
- 5/16
- 5/16UN
- UNC5/16
- UNF5/16
- W5/16
- 5/16-24UNF
- 5/16-18UNC
- 5/16W18
- 5/64
- M5.5
- 6
- M6
- M6.0
- M7
- 7/8
- UNC7/8
- UNF7/8
- W7/8
- 7/16
- 7/16UN
- UNC7/16
- UNF7/16
- 7/16-20UNF
- 7/16-14UNC
- 7/16W14
- SM7/32
- 8
- M8
- 9
- M9
- 9/16
- 9/64
- 10
- M10
- 11
- M11
- 11/16
- SM11/32
- 11/64
- 12
- M12
- 13
- M13
- M14
- 15
- M15
- 15/64
- 16
- M16
- 17
- M17
- M18
- 19
- M19
- 20
- M20
- 22
- M22
- M24
- 25
- M25
- M26
- M27
- 28
- M28
- M30
- 31
- 31/32
- M32
- M33
- M34
- M35
- 36
- M36
- M37
- M38
- 39
- M39
- M40
- 42
- M42
- M44
- M45
- M46
- M48
-
Screw Types
- Meter
- unified
- Whitworth
- Sewing Machine
- Parallel for Pipes
- Other
-
work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless steel (SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Quenched and tempered steel (45 to 55 HRC)
- High Hardness Steel (50-60 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermosetting plastic (bakelite, phenol, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
-
Pitch (P), Number of Threading(mm)
-
Tool Material Type
-
Tap Type
-
Hole type
-
Chamfer threads (Lcf)
-
Coating Type
-
Coating Y/N
-
Overall Length (L)(mm)
Narrow search by specifying Manufacturer
-
- MISUMI (0)
- YAMAWA MFG (11)
- TRUSCO NAKAYAMA (8)
- OSG (7)
- RUKO (2)
- SKC (1)
- HOZAN (0)
- ISHIHASHI (0)
- ENGINEER (0)
CAD
-
- 2D
- 3D
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy