(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Roll Taps（Chamfer threads (Lcf)：3P）
A forming tap is a raised type screw forming tool that makes a screw mark on a metal pilot hole. It can be used for both blind holes and through holes, and there is almost no chips, so cleaning can be shortened, etc. Depending on the product, there is also a special processing that enables long-life processing without chip problems, and low torque is achieved by adopting a special shape for the tap raised part. Others have a tin coating and have excellent abrasion and chip-welding resistance. Compatible materials for processing include rolled aluminum, structural steel, copper, etc. The selection point of the forming tap is not suitable for the work material, so select one suitable for the work material used. At the same time, it is necessary to check the screw length, nominal size, pitch, number of bites, etc., depending on the place to be used before selecting.
| Days to Ship |
|
|---|
-
Standard Price: MYR 120.48- Days to Ship: 5 Day(s) or more -
Roll Taps for Thin Soft Structural Steel Sheets_R-Y
YAMAWA MFG
It is suitable for threading for simple installation used for thin steel plates such as SPC and SPH and mild steel of SS400, S20 or less.
Standard Price: MYR 52.31- Days to Ship: 9 Day(s)
| Brand |
|---|
| Product Series |
| Days to Ship |
| Screw size (Nominal) |
| Screw Types |
| work material |
| Pitch (P), Number of Threading(mm) |
| Tool Material Type |
| Tap Type |
| Hole type |
| Chamfer threads (Lcf) |
| Coating Type |
| Coating Y/N |
| Overall Length (L)(mm) |
|
| |
| Brand | TANOI MFG | YAMAWA MFG |
| Product Series | ||
| Days to Ship | 5 Day(s) or more | 9 Day(s) |
| Screw size (Nominal) | M1 ～ M3 | M2 ～ M8 |
| Screw Types | Meter | Meter |
| work material | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] |
| Pitch (P), Number of Threading(mm) | 0.2 ～ 0.5 | 0.4 ～ 1.25 |
| Tool Material Type | High-speed steel | High-speed steel |
| Tap Type | Roll tap | Roll tap |
| Hole type | - | For through hole / For blind hole |
| Chamfer threads (Lcf) | 3P | 3P |
| Coating Type | TiCN | - |
| Coating Y/N | Available | NA |
| Overall Length (L)(mm) | 30 ～ 46 | 42 ～ 70 |
Loading...
Configure
Specification/Dimensions
-
Screw size (Nominal)
- No.0
- No.0UN
- No.10
- No.1
- No.1UN
- No.10UN
- No.10-32UNF
- No.10-24UNC
- No.12
- No.12UN
- No.12-28UNF
- No.12-24UNC
- No.2
- No.2UN
- No.2-64UNF
- No.2-56UNC
- No.3
- No.3UN
- No.3-56UNF
- No.3-48UNC
- No.4
- No.4UN
- No.4-48UNF
- No.4-40UNC
- No.5
- No.5UN
- S0.5
- No.5-44UNF
- No.5-40UNC
- 0.6
- No.6
- No.6UN
- S0.6
- No.6-32UNC
- 0.7
- S0.7
- 0.8
- No.8
- No.8UN
- S0.8
- No.8-36UNF
- No.8-32UNC
- 0.9
- S0.9
- M1
- 1/4
- 1/4UN
- 1/4-28UNF
- 1/4-20UNC
- M1.1
- M1.2
- M1.4
- M1.6
- M1.7
- M1.8
- M2
- M2.2
- M2.3
- M2.5
- M2.6
- M3
- M3.5
- M4
- M5
- M6
- No6-40UNF
- M7
- M8
- M9
- M10
- M11
- M12
- M14
- M16
- M18
- M20
- M22
- M24
- M27
- M30
- M33
- M36
- M42
- M45
-
Screw Types
- Meter
- unified
- Miniature
-
work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless steel (SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Steel casting (SC)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
-
Pitch (P), Number of Threading(mm)
-
Tool Material Type
-
Tap Type
-
Hole type
-
Chamfer threads (Lcf)
-
Coating Type
-
Coating Y/N
-
Overall Length (L)(mm)
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy