(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Point Taps（Screw size (Nominal)：M2.3）
[What is a point tap?]
It is a groove-shaped cutting tap that discharges chips in the tap traveling direction, and is ideal for machining "through holes". It is characterized by low cutting torque as there are few obstacles to the chips. There are two types of materials, mainly HSS (= high speed steel) and carbide: HSS is tough and hard to break and carbide is abrasion resistant.
| Days to Ship |
|
|---|
-
Model A Tap Series, Pointed Tap A-POT
OSG
Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. Point tap with point grooves used for through holes.
Standard Price: MYR 122.61- Days to Ship: 5 Day(s) or more -
Pointed Tap for Stainless Steel use EX-SUS-POT
OSG
Offers superb sharpness and durability. Can be used to drill holes in difficult-to-cut stainless steel.
Standard Price: MYR 94.08 Days to Ship: 5 Day(s) or more -
Pointed Tap Series, General Purpose EX-POT
OSG
For general use, ideal with carbon steel, alloy steel, and non-ferrous metals for cutting materials where the metal waste forms a continuous coil. Chips are reliably pushed forward so that they don't get in the way
Standard Price: MYR 74.46- Days to Ship: 5 Day(s) or more -
Long Shank・General Application_EX-LT-POT
OSG
For standard point taps, it is used when the protruding length of the screw is insufficient.
Standard Price: MYR 167.43- Days to Ship: 5 Day(s) or more -
Pointed Tap for Deep Holes EX-DH-POT
OSG
Particularly suitable for workpieces which are easily scorched because the screw tapping length is particularly long.
Standard Price: MYR 94.08 Days to Ship: 7 Day(s) or more -
YAMAWA MFG
A point tap convenient for through-hole machining as scraps are ejected forward.
[Features]
· Slanting the groove on the cutting edge of the biting part pushes the scraps forward.
· Minimal scrap issues.
· Low cutting torque.
· Capable of machining both synchronously and asynchronously.
[Applications]
· Ideal for machining through-holes.
* N-PO models will transition to PO as soon as stock runs out.Standard Price: MYR 86.55- Days to Ship: 8 Day(s) or more -
Pointed Tap Series TiN Coating TIN-POT
OSG
Features a wide range of uses, but especially suitable for high-speed tapping of stainless steel, tempered material, etc.
Standard Price: MYR 122.19 Days to Ship: 5 Day(s) or more -
Pointed Tap for General Application (with OX)_EX-H-POT
OSG
For standard point taps, it is used when the protruding length of the screw is insufficient.
Standard Price: MYR 71.97 Days to Ship: 5 Day(s) or more -
Pointed Tap for Thin Plate EX-SS-POT
OSG
Ideal for tapping soft steel thin plates (through holes) with a tensile strength of 700 N/mm² or less. A beautiful finished surface is obtained as the generation of punch hole and bearing hole whiskers, flashes, or chipping can be kept to a minimum
Standard Price: MYR 66.91 Days to Ship: 5 Day(s) or more -
Spiral Pointed Taps for Stainless Steels_SU+PO
YAMAWA MFG
Point tap for through-hole machining with extremely viscous or work-hardened work material.
[Features]
Optimal blade design is suitable for machining chrome steel, molybdenum steel, and stainless steel.
· Capable of machining both synchronously and asynchronously.
· Machining speed of 10 m/min or less is recommended.
[Applications]
· Ideal for machining through-holes with chrome steel, molybdenum steel, and stainless steel.Standard Price: MYR 93.80- Days to Ship: 7 Day(s) or more -
Standard Price: MYR 557.75 Days to Ship: 8 Day(s) -
Plus Series Spiral Pointed Taps_+PO
YAMAWA MFG
A point tap suitable for medium- to high-speed machining with machining centers, etc.
[Features]
· Optimal design of the threads allow burdens of machining on each biting blade to be reduced, resulting reduction of machining torque as well as enhancement of wear resistance.
[Applications]
· Can be machined at 10 to 15 m/min using a machining center (fully-synchronized feeding recommended).Standard Price: MYR 88.16 Days to Ship: 9 Day(s) -
Spiral Pointed Taps, Oxidized_PO-OX
YAMAWA MFG
Point taps with oxide treatment (OX).
[Features]
· The film produced by oxide treatment becomes an oil reservoir (oil pocket) for machining oil, reducing frictional resistance.
· This prevents parts welding together and improves the finished surface roughness of the female thread.
· Oxide treatment is also effective for removing residual stress from the tap, extending the life span.
[Applications]
· Ideal for machining easily welded materials such as stainless steel or low carbon steel.Standard Price: MYR 166.81 Days to Ship: 8 Day(s) -
Short Spiral Pointed Taps for Deep Hole Use_S-PO
YAMAWA MFG
A tap with short thread length effective for deep screw tapping of 2.5 times nominal diameter or more.
[Features]
· Short thread length gives low frictional resistance.
· Good supply of cutting oil is effective for deep thread machining to 2.5 times the nominal diameter or more.
· Oxide treatment (OX treatment) applied to prevent welding.
[Applications]
· Optimal for deep thread machining to 2.5 times the nominal diameter or more.Standard Price: MYR 98.51 Days to Ship: 7 Day(s) or more -
Spiral Pointed Tap with Long Shank_A-LT-POT
OSG
Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. Point tap with point grooves used for through holes.
Standard Price: MYR 242.04 Days to Ship: 5 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Screw size (Nominal) |
| Screw Types |
| work material |
| Pitch (P), Number of Threading(mm) |
| Tool Material Type |
| Tap Type |
| Hole type |
| Chamfer threads (Lcf) |
| Coating Type |
| Coating Y/N |
| Overall Length (L)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | OSG | OSG | OSG | OSG | OSG | YAMAWA MFG | OSG | OSG | OSG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | OSG |
| Product Series | |||||||||||||||
| Days to Ship | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 8 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 8 Day(s) | 9 Day(s) | 8 Day(s) | 7 Day(s) or more | 5 Day(s) or more |
| Screw size (Nominal) | M2.3 | M2.3 | M2.3 | M2.3 | M2.3 | M2.3 | M2.3 | M2.3 | M2.3 | M2.3 | M2.3 | M2.3 | M2.3 | M2.3 | M2.3 |
| Screw Types | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter |
| work material | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] | Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Stainless steel (SUS)[○] / Copper (Cu)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○] | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Ductile Cast Iron (FCD)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] |
| Pitch (P), Number of Threading(mm) | 0.4 | 0.4 | 0.4 | 0.4 | 0.4 | 0.4 | 0.4 | 0.4 | 0.4 | 0.4 | 0.4 | 0.4 | 0.4 | 0.4 | 0.4 |
| Tool Material Type | Powder high-speed steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | High-speed steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | Powder high-speed steel |
| Tap Type | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap |
| Hole type | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole |
| Chamfer threads (Lcf) | 5P | 4P | 5P | 5P | 4P | 5P | 5P | 5P | 5P | 5P | 28P | 5P | 5P | 5P | 5P |
| Coating Type | Other | Non-Coated | Non-Coated | Non-Coated | Non-Coated | - | TiN | Non-Coated | Non-Coated | - | - | - | - | - | Other |
| Coating Y/N | Available | NA | NA | NA | NA | NA | Available | NA | NA | NA | NA | NA | NA | NA | Available |
| Overall Length (L)(mm) | 42 | 42 | 42 | 80 ～ 100 | 42 | 42 | 42 | 42 | 42 | 42 | 80 | 42 | 42 | 42 | 80 |
Loading...
Configure
Specification/Dimensions
-
Screw size (Nominal)
- No.0
- No.0UN
- No.10
- No.1
- No.1UN
- No.10UN
- No.10-32UNF
- No.10-24UNC
- No.12
- No.12UN
- No.2
- No.2UN
- No.3
- No.3UN
- No.4
- No.4UN
- No.4-40UNC
- No.5
- No.5UN
- No.5-40UNC
- No.6
- No.6UN
- S0.6
- No.6-32UNC
- S0.7
- No.8
- No.8UN
- S0.8
- No.8-32UNC
- S0.9
- 1
- 1UN
- M1
- W1
- 1 1/2
- 1"1/2UN
- W1"1/2
- 1 1/4
- 1"1/4UN
- W1"1/4
- 1 1/8
- W1"1/8
- 1/2
- 1/2UN
- W1/2
- 1/2-20UNF
- 1/2-13UNC
- 1 3/8
- 1/4
- 1/4UN
- SM1/4
- W1/4
- 1/4-28UNF
- 1/4-20UNC
- 1/8
- SM1/8
- W1/8
- M1.1
- M1.2
- M1.4
- M1.6
- M1.7
- M1.8
- 2
- M2
- M2.0
- M2.2
- M2.3
- M2.5
- M2.6
- M3
- M3.0
- STI M3
- 3/4
- 3/4UN
- W3/4
- 3/4-16UNF
- 3/4-10UNC
- 3/8
- 3/8UN
- W3/8
- 3/8-24UNF
- 3/8-16UNC
- 3/16
- SM3/16
- W3/16
- SM3/32
- M3.5
- 4M
- M4
- STI M4
- M4.5
- 5M
- M5
- STI M5
- 5/8
- 5/8UN
- W5/8
- 5/8-18UNF
- 5/8-11UNC
- 5/16
- 5/16UN
- W5/16
- 5/16-24UNF
- 5/16-18UNC
- 5/32
- M5.5
- M6
- STI M6
- M7
- 7/8
- 7/8UN
- W7/8
- 7/8-14UNF
- 7/8-9UNC
- 7/16
- 7/16UN
- W7/16
- 7/16-20UNF
- 7/16-14UNC
- 7/32
- M8
- STI M8
- M9
- 9/16
- 9/16UN
- 9/16-18UNF
- 9/16-12UNC
- SM9/32
- 9/64
- SM9/64
- M10
- M10.0
- STI M10
- M11
- 11/64
- SM11/64
- M12
- M12.0
- STI M12
- M13
- M14
- M14.0
- M15
- 15/64
- SM15/64
- M16
- M16.0
- M17
- M18
- M19
- M20
- M22
- M23
- M24
- M25
- M26
- M27
- M28
- M30
- M32
- M33
- M35
- M36
- M38
- M39
- M40
- M42
- M45
- M48
-
Screw Types
- Meter
- unified
- Whitworth
- Sewing Machine
- Miniature
-
work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless steel (SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Quenched and tempered steel (45 to 55 HRC)
- High Hardness Steel (50-60 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
-
Pitch (P), Number of Threading(mm)
-
Tool Material Type
-
Tap Type
-
Hole type
-
Chamfer threads (Lcf)
-
Coating Type
-
Coating Y/N
-
Overall Length (L)(mm)
Narrow search by specifying Manufacturer
-
- MISUMI (0)
- OSG (9)
- YAMAWA MFG (6)
- SKC (0)
- NACHI (0)
- TRUSCO NAKAYAMA (0)
- ISHIHASHI (0)
- GUHRING (0)
- SANDVIK (0)
CAD
-
- 2D
- 3D
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy