(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
| Days to Ship |
|
|---|

EX-GOLD Drills Stub for Stainless & Mild Steels_EX-SUS-GDS
OSG
[Features]A drill with an overall length of 38 mm to 170 mm.
[Applications]Can be used for stainless steel, mild steel, copper alloys, etc.
| Standard Price: | MYR 40.63- |
|---|---|
| Days to Ship: | 2 Day(s) or more |

Cobalt Straight Shank Drill COSD
NACHI
A general-purpose cobalt drill that can handle anything from steel to stainless steel.
[Features]
· Consistent drill bite due to the X-type thinning.
· Sharpness is increased by reinforcing the drill torsion angle.
· White surface less than 2.0 mm in diameter (not colored).
[Applications]
· Can be used for a wide range of materials, from steel to stainless steel.
| Standard Price: | MYR 23.05- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

NACHI
180° flat multifunctional carbide drill.
[Features]
· Reduces hole expansion thanks to its double margins and 2-step cutting edge tip shape.
· Capable of producing an accurate counter-bore surface with one shot.
· Aqua EX coating improves heat and wear resistance, providing long life.
[Applications]
· Can support a wide range of applications such as countersinking on inclined surfaces, correction of eccentric bores, burr-free machining of thin plates, etc.
| Standard Price: | MYR 314.53- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

Carbide Drill, Straight Shank / Stub
MISUMI
[Features]
·Versatile uncoated carbide drill for a wide range of applications
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
| Standard Price: | MYR 54.06- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

C-UMD, Micro Coat, 2-Flute UNIMAX Drill Bit
UNION TOOL
[Features]
·UT microcoating.
·Tip angle 150
·Tool Material: Carbide
| Standard Price: | MYR 93.72- |
|---|---|
| Days to Ship: | 8 Day(s) or more |

Carbide Flat Drill 2D Type_ADF-2D
OSG
[Features]
· Can be used in various applications such as counterboring of inclined and curved surfaces and semi-split hole drilling.
· The wear-resistant layer suppresses abrasion and prevents crack propagation due to the periodic nano-layered coating.
· The original bottom edge shape reduces the cutting resistance and achieves stable processing.
| Standard Price: | MYR 236.13- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

Cobalt Tapered Shank Drill COTD
NACHI
A general-purpose cobalt drill that can handle anything from steel to stainless steel and aluminum.
[Features]
· Cobalt HSS with excellent wear resistance and heat resistance is used for the main body.
| Standard Price: | MYR 208.21- |
|---|---|
| Days to Ship: | 5 Day(s) or more |

NACHI
A general purpose long drill bit used over the widest range of applications.
[Features]
· The optimal drill bit for machining can be selected, supporting a diverse range of drill depths and an abundant range of sizes (groove length, overall length).
| Standard Price: | MYR 50.61- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

NACHI
High-grade powdered high-speed steel and SG coating allows this HSS drill to have the longest life possible.
[Features]
· Optimized cutting edge, groove shape and high precision achieve stable processing and high hole positioning accuracy.
· Achieves high-efficiency machining based on high speed and high feed.
[Applications]
· Capable of high speed, high efficiency machining of materials ranging from steel to stainless steel and aluminum, enabling high precision drilling.
| Standard Price: | MYR 47.25- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

SAITOTWISTDRILL
Because it is made of HSS material, it has high hardness and can be used for deep hole drilling at high speed.
| Standard Price: | MYR 39.62- |
|---|---|
| Days to Ship: | 7 Day(s) or more |

EX-GOLD Drills Regular for Stainless & Mild Steels_EX-SUS-GDR
OSG
Regular groove length series ideal for stainless steel, mild steel, aluminum alloy, copper alloy, etc.
| Standard Price: | MYR 44.93- |
|---|---|
| Days to Ship: | 5 Day(s) or more |

NACHI
A general-purpose drill used in the widest ranges of applications.
[Features]
· A standard drill that corresponds to the JIS standard.
| Standard Price: | MYR 169.22- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

EX-GOLD Drills Medium for Stainless & Mild Steels_EX-SUS-GDN
OSG
[Features]A drill with an overall length of 41 mm to 50 mm.
[Applications]Can be used for stainless steel, mild steel, copper alloys, etc.
| Standard Price: | MYR 62.17- |
|---|---|
| Days to Ship: | 5 Day(s) or more |

Carbide Burnishing Drill, Straight Model
MISUMI
[Features]
·Achieves high-precision drilling of aluminum without a pilot hole
·Tip diameter can be specified in units of 0.01 mm and groove length in units of 0.1 mm
| Days to Ship: | 7 Day(s) or more |
|---|

MISUMI
[Features]
·Drilling and counterbore processing can be performed in 1 process for bolt hole processing, realizing highly efficient processing (Counterbore type)
·Since relief hole can be drilled at same time as drilling power strip pilot hole, it is ideal for drilling pilot hole in thick plates that require relief (Incision type)
| Standard Price: | MYR 346.19- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

TiAlN Coated Powdered High-Speed Steel Drill, End Mill Shank / Regular Model
MISUMI
Sophisticated deep hole drilling that's made possible by well-balanced models that are aimed for the highest standards in high-speed steel
| Standard Price: | MYR 75.13- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

NACHI
Short type straight shank drill with a TiN coated surface.
[Features]
· The original thinning shape (3-rake) improves centripedality and chip separation.
· TiN coating achieves longer life.
[Applications]
· Capable of high efficiency machining of materials ranging from steel to stainless steel and aluminum. High positional accuracy can be obtained.
| Standard Price: | MYR 40.93- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

NACHI
Straight shank type coating drill for general purpose.
[Features]
· The surface is coated with a hard TiN film to achieve a long service life.
[Applications]
· Supports materials from steel to stainless steel and aluminum.
| Standard Price: | MYR 31.00 |
|---|---|
| Days to Ship: | 2 Day(s) |

NACHI
Drill capable of stable hole drilling with AG coating excellent in heat resistance.
[Features]
· Newly developed optimal drill shape adopted for machining high alloy HSS, AG coatings, and stainless steel.
· It has a cutting edge shape that's excellent in the segmentation of chips and a groove shape that achieves both high chip discharge performance and drill rigidity.
· Stable machining accuracy is achieved by using a high-precision end mill shank.
[Applications]
· Optimal for stainless steel.
| Standard Price: | MYR 35.65- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

Solid Carbide Drills Stub for Byway and Precision Operation_WX-MS-GDS
OSG
Achieves high precision and high performance for drilling ultra-fine diameters for precision equipment or IT components
| Standard Price: | MYR 104.21- |
|---|---|
| Days to Ship: | 5 Day(s) or more |

NACHI
High-grade powdered high-speed steel and SG coating realizes the longest life possible for this HSS drill.
[Features]
· It is a high general-purpose drill for a wide range of work materials, from steel and stainless steel to aluminum.
· Optimized cutting edge, groove shape and high precision achieve stable processing and high hole positioning accuracy.
· Achieves high-efficiency machining based on high speed and high feed.
[Applications]
· Capable of high speed, high efficiency machining of materials ranging from steel to stainless steel and aluminum.
· Enables high precision drilling.
| Standard Price: | MYR 66.25- |
|---|---|
| Days to Ship: | 6 Day(s) or more |
| Standard Price: | MYR 81.30- |
|---|---|
| Days to Ship: | 5 Day(s) or more |

TiAlN Coated Carbide Drill, Regular
MISUMI
[Features]
·Designed with small core diameter to improve cutting chip discharge
·The combination of superfine cemented carbide alloy and TiAlN coating provides excellent abrasion resistance and enables high-speed machining
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, delivery times, etc.
| Standard Price: | MYR 106.68- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

MISUMI
[Features]
·Demonstrates one of the best cutting performance for general steel, stainless steel, titanium, inconel, heat-resistant alloys, and other difficult-to-cut materials
·High helix shape promotes cutting chip discharge
·X-shaped thinning provides good chamfer and greatly reduces thrust load
| Standard Price: | MYR 41.66- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

High-Speed Steel Drill, Straight Shank / Regular【1-10 Pieces Per Package】
MISUMI
[Features]
·Lineup of frequently used sizes in packs
·Straight shank type with general-purpose high-speed steel TiN-coated
| Standard Price: | MYR 33.58- |
|---|---|
| Days to Ship: | 2 Day(s) or more |

NACHI
A general purpose long drill bit used over the widest range of applications.
[Features]
· The optimal drill bit for machining can be selected, supporting a diverse range of drill depths and an abundant range of sizes (groove length, overall length).
[Applications]
· Enables selection of a drill bit suitable for the drilling depth for machining.
| Standard Price: | MYR 394.30- |
|---|---|
| Days to Ship: | 5 Day(s) or more |

SumiDrill WDX Type / PDL Type / PCT Type Insert WDXT-G
SUMITOMO_ELEC_
A tip for tip-replacement drills.
| Standard Price: | MYR 58.07- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

HPD Hyper Burnishing Drill AH10
ASAHI TOOLS
Recommended conditions twice the speed and feeding speed of the straight blade burnishing drill, maintains the same dimensional accuracy and surface roughness as the straight blade burnishing drill, dramatically reduces thrust and increases tool life
Supports screw pilot hole (cutting, rolling tap metric coarse type class 2) sizes
| Standard Price: | MYR 370.73- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

Straight Drill Set【13-100 Pieces Per Package】
ISHIHASHI
A grinding drill produced using Swedish technology and an American automatic grinding machine, with grooves produced by a grindstone after heat treatment.
| Standard Price: | MYR 288.21- |
|---|---|
| Days to Ship: | 9 Day(s) |

OSG
Indexable drill that can stably perform hole drilling with 3D depth.
| Standard Price: | MYR 1,972.28- |
|---|---|
| Days to Ship: | 5 Day(s) or more |

Aqua Drill EX Flat Long Shank AQDEXZLS
NACHI
180° flat multifunctional carbide drill.
[Features]
· Flat drill 10D type with excellent drilling performance.
· Reduces hole expansion thanks to its double margins and 2-step cutting edge tip shape.
· Capable of producing an accurate counter-bore surface with one shot.
· Aqua EX coating improves heat and wear resistance, providing long life.
[Applications]
· A multi-functional drill that is capable of supporting a wide range of applications such as countersinking on inclined surfaces, correction of eccentric bores, burr-free machining of thin plates, etc.
| Standard Price: | MYR 439.87- |
|---|---|
| Days to Ship: | 5 Day(s) or more |

Carbide 2-Flute Leading Drill 60° D921X
7 LEADERS
[Features]
· 60° leading drill.
· Prevents chipping of the tip by maintaining the tip part at 120°.
· Nanoparticle multilayer coating.
· Excellent lubricity and abrasion resistance.
· Exhibits its strength in general cutting processes.
| Standard Price: | MYR 127.63- |
|---|---|
| Days to Ship: | 8 Day(s) or more |

NS TOOL
[Features]
· MUGEN Flat Drill makes drilling holes in inclined or curved surfaces easy.
· Adopts a thinning shape (spiral thinning (⌀1 to ⌀2.9) / triple thinning (⌀3 to ⌀6)) developed to suit each size, a double margin (⌀2.6 or more), and a long neck shape to achieve holes with good and stable accuracy.
· MFD has a flat bottom blade that flattens out the bottoms of blind holes and is optimal for counterbore machining and thread cutting (thread milling) pilot holes.
· Through-holes can be drilled without the generation of burrs.
· Adopts a reliable MUGEN coating to support a range of work material from mild steel to stainless steel.
· Reduce drilling process time and improve machining efficiency with this 1 tool.
| Standard Price: | MYR 205.05- |
|---|---|
| Days to Ship: | 11 Day(s) |

TiAlN Coated Carbide Long Drill, Straight Shank
MISUMI
Carbide long drill that achieves the high efficiency deep-hole drilling
| Standard Price: | MYR 483.69- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

TS Coated Carbide Drill for High-Hardness Steel Machining, Small Diameter / Stub / Regular
MISUMI
A small radius type of the high-hardness steel series
| Standard Price: | MYR 183.87- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

Carbide Burnishing Drill, Stepped Model
MISUMI
[Features]
·No complicated estimates required. It is possible to order part number of stepped drill bit without drawings
| Days to Ship: | 7 Day(s) or more |
|---|

MISUMI
[Features]
·No complicated estimates required. It is possible to order part number of stepped drill bit without drawings
| Days to Ship: | 11 Day(s) or more |
|---|

TiN Coated High-Speed Steel Drill for Machining Difficult-to-Cut Materials, Straight Shank / Long
MISUMI
[Features]
·Demonstrates one of the best cutting performance for general steel, stainless steel, titanium, inconel, heat-resistant alloys, and other difficult-to-cut materials
·High helix shape promotes cutting chip discharge
| Standard Price: | MYR 81.39- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

High-Speed Steel Drill, Straight Shank / Regular【5-10 Pieces Per Package】
MISUMI
[Features]
·Lineup of frequently used sizes
·Straight shank type with general-purpose high-speed steel steam oxide treatment
| Standard Price: | MYR 48.12- |
|---|---|
| Days to Ship: | 2 Day(s) or more |

TiN Coated High-Speed Steel Drill, Straight Shank / Regular【1-10 Pieces Per Package】
MISUMI
With a wide range of response capabilities for everything from general steel to difficult-to-cut materials, it is capable of deep drilling with a high degree of difficulty
| Standard Price: | MYR 67.70- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

TiN Coated HSS Drill for Stainless Steel Machining, End Mill Shank / Regular
MISUMI
· A long-awaited end mill shank type is now available for HSS drills dedicated for stainless steel
· MISUMI's unique thinning enables excellent center biting
| Standard Price: | MYR 53.80- |
|---|---|
| Days to Ship: | 4 Day(s) or more |
| Days to Ship: | 7 Day(s) or more |
|---|

NACHI
HSS drill which is capable of speedy centering, chamfering and V-grooving and boasts a long service life.
[Features]
· Highly accurate positioning is possible with good bite.
· The sharp blade produces a beautifully finished surface.
[Applications]
· Can be used for various processing, from chamfering to V groove machining.
| Standard Price: | MYR 77.04- |
|---|---|
| Days to Ship: | 4 Day(s) or more |

NACHI
A general-purpose HSS drill which is used for the widest range of applications.
[Features]
· Corresponds to the JIS standard.
[Applications]
· Usable in a wide range of applications.
| Standard Price: | MYR 15.39- |
|---|---|
| Days to Ship: | 2 Day(s) or more |

NACHI
High-speed drill for high efficiency machining of aluminum alloys.
[Features]
· It utilizes DLC coating (diamond-like carbon) with high hardness, a low coefficient of friction and abrasion resistance.
· Has low adhesion and eliminates troubles such as chip clogging which are likely to occur in aluminum processing.
[Applications]
· The coefficient of friction is small, and since the aluminum is unlikely to weld, high friction efficiency with aluminum alloys is demonstrated.
| Standard Price: | MYR 35.77- |
|---|---|
| Days to Ship: | 5 Day(s) or more |
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Hole diameter (drill diameter) D(mm) |
| Overall Length L(mm) |
| Groove Length L(mm) |
| work material |
| Shank Type |
| Tool Material Type |
| With/without Oil Hole |
| Coating Y/N |
| Coating Type |
| Brand | OSG | NACHI | NACHI | MISUMI | UNION TOOL | OSG | NACHI | NACHI | NACHI | SAITOTWISTDRILL | OSG | NACHI | OSG | MISUMI | MISUMI | MISUMI | NACHI | NACHI | NACHI | OSG | NACHI | NACHI | MISUMI | MISUMI | MISUMI | NACHI | SUMITOMO_ELEC_ | ASAHI TOOLS | ISHIHASHI | OSG | NACHI | 7 LEADERS | NS TOOL | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | NACHI | NACHI | NACHI |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Product Series | EX-GOLD Drills Regular for Stainless & Mild Steels_EX-SUS-GDR | EX-GOLD Drills Medium for Stainless & Mild Steels_EX-SUS-GDN | TiAlN Coated Powdered High-Speed Steel Drill, End Mill Shank / Regular Model | Solid Carbide Drills Stub for Byway and Precision Operation_WX-MS-GDS | High-Speed Steel Drill, Straight Shank / Regular【1-10 Pieces Per Package】 | TS Coated Carbide Drill for High-Hardness Steel Machining, Small Diameter / Stub / Regular | TiN Coated High-Speed Steel Drill for Machining Difficult-to-Cut Materials, Straight Shank / Long | High-Speed Steel Drill, Straight Shank / Regular【5-10 Pieces Per Package】 | TiN Coated High-Speed Steel Drill, Straight Shank / Regular【1-10 Pieces Per Package】 | TiN Coated HSS Drill for Stainless Steel Machining, End Mill Shank / Regular | |||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||||
| Days to Ship | 2 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 8 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 7 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 2 Day(s) | 4 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 2 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 9 Day(s) | 5 Day(s) or more | 5 Day(s) or more | 8 Day(s) or more | 11 Day(s) | 4 Day(s) or more | 4 Day(s) or more | 7 Day(s) or more | 11 Day(s) or more | 4 Day(s) or more | 2 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 7 Day(s) or more | 4 Day(s) or more | 2 Day(s) or more | 5 Day(s) or more |
| Hole diameter (drill diameter) D(mm) | 0.5 ~ 32 | 0.5 ~ 13 | 0.5 ~ 15.8 | 0.5 ~ 7.5 | 0.1 ~ 3 | 2 ~ 20 | 7 ~ 40 | 1 ~ 12.8 | 0.6 ~ 19.5 | 0.45 ~ 7.05 | 2 ~ 32 | 7.6 ~ 100 | 1 ~ 1.99 | 0 | 3.4 ~ 10.3 | 2 ~ 13 | 1 ~ 20 | 3 | 1.01 ~ 20 | 0.1 ~ 5 | 2 ~ 15 | 2.5 ~ 8 | 0.3 ~ 13 | 2 ~ 13 | 0.2 ~ 13 | 7 ~ 50 | - | 2.8 ~ 20 | - | 21 ~ 50.5 | 3.6 ~ 11.7 | 0.5 ~ 20 | 1 ~ 1.9 | 3 ~ 10 | 0.8 ~ 3 | - | - | 2 ~ 13 | 1 ~ 13 | 1 ~ 12.5 | 2 ~ 13 | - | 3 ~ 20 | 0.8 ~ 16.5 | 1 ~ 13 |
| Overall Length L(mm) | 38 ~ 170 | 27 ~ 152 | 47 ~ 115 | 20 ~ 74 | 38 | 50 ~ 140 | 155 ~ 365 | 75 ~ 600 | 38 ~ 168 | 75 ~ 200 | 56 ~ 245 | - | 41 ~ 50 | 40 ~ 60 | 73 ~ 136 | 56 ~ 161 | 33 ~ 168 | 61 | 40 ~ 168 | 38 ~ 64 | - | 150 ~ 300 | 38 ~ 124 | 49 ~ 151 | 19 ~ 151 | 200 ~ 1000 | - | 60 ~ 170 | - | 142 ~ 252 | 100 ~ 150 | 38 ~ 130 | 55 | 100 ~ 200 | 47 ~ 67 | 40 ~ 60 | - | 85 ~ 205 | 34 ~ 151 | 34 ~ 151 | 56 ~ 158 | - | - | 34 ~ 181 | 50 ~ 158 |
| Groove Length L(mm) | 3 ~ 90 | 5 ~ 80 | 1.65 ~ 72 | 3 ~ 34 | 1.2 ~ 12 | 10 ~ 88 | 75 ~ 220 | 35 ~ 300 | 3.5 ~ 94 | 10 ~ 90 | 24 ~ 165 | 82 ~ 355 | 9 ~ 18 | 0 | 21 ~ 72 | 24 ~ 101 | 8 ~ 94 | 33 | 6 ~ 94 | 0.6 ~ 26 | 24 ~ 114 | 75 ~ 200 | 3 ~ 77 | 24 ~ 101 | 3 ~ 101 | 25 ~ 700 | - | 20 ~ 110 | - | - | 16 ~ 54 | 1 ~ 40 | 2 ~ 11.8 | 60 ~ 140 | 6 ~ 27 | - | - | 56 ~ 134 | 12 ~ 101 | 12 ~ 101 | 24 ~ 101 | - | 9 ~ 40 | 11 ~ 132 | 12 ~ 101 |
| work material | Copper[◎] | Copper[○] | Copper[○] | Copper[○] | Copper[○] | Copper[○] | Copper[○] | Copper[○] | Copper[○] | Copper[○] | Copper[◎] | Copper[○] | Copper[◎] | Copper[○] | Copper[○] | Copper[○] | Copper[○] | Copper[○] | Copper[○] | Copper[◎] | Copper[○] | Copper[○] | Copper[◎] | Copper[○] | Copper[○] | Copper[○] | Copper[○] | Copper[○] | Copper[○] | Copper[○] | Copper[○] | Copper[○] | Copper[◎] | Copper[○] | Copper[○] | Copper[○] | Copper[○] | Copper[○] | Copper[○] | Copper[○] | Copper[○] | Copper[○] | Copper[○] | Copper[○] | Copper[◎] |
| Shank Type | End Mill Shank / straight shank | straight shank | End Mill Shank / straight shank | straight shank | End Mill Shank | End Mill Shank / straight shank | Taper shank | straight shank | End Mill Shank | - | End Mill Shank / straight shank | - | End Mill Shank | End Mill Shank | straight shank | End Mill Shank | straight shank | straight shank | End Mill Shank / straight shank | End Mill Shank / straight shank | - | straight shank | End Mill Shank | straight shank | straight shank | Taper shank | - | End Mill Shank / straight shank | straight shank | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank | straight shank | End Mill Shank | End Mill Shank | straight shank | straight shank | straight shank | straight shank | End Mill Shank | End Mill Shank | - | straight shank | End Mill Shank / straight shank |
| Tool Material Type | High Vanadium HSS | Cobalt HSS | Carbide | Carbide | Carbide | Carbide | Cobalt HSS | High-speed steel | High-speed steel | High-speed steel | High Vanadium HSS | High-speed steel | High Vanadium HSS | Carbide | Carbide | Powder high-speed steel | Cobalt HSS | High-speed steel | High-speed steel | Carbide | High-speed steel | Cobalt HSS | Carbide | Cobalt HSS | High-speed steel / Cobalt HSS | High-speed steel | - | Carbide | High-speed steel | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Cobalt HSS | High-speed steel | Cobalt HSS | Powder high-speed steel | Carbide | Cobalt HSS | High-speed steel | High-speed steel |
| With/without Oil Hole | NA | NA | NA | NA | NA | NA | - | NA | NA | NA | NA | - | NA | NA | NA | Available / NA | NA | NA | NA | NA | - | NA | NA | NA | NA | - | - | NA | NA | Available | NA | - | NA | Available / NA | NA | NA | NA | NA | NA | NA | NA | NA | - | NA | NA |
| Coating Y/N | Available | NA | Available | NA | Available | Available | NA | NA | Available | NA | Available | - | Available | NA | Available | Available | Available | Available | Available | Available | - | NA | Available | Available | Available / NA | NA | - | NA | NA | NA | Available | - | Available | Available | Available | NA | NA | Available | NA | Available | Available | NA | - | NA | Available |
| Coating Type | TiN | Non-Coated | Other | - | Other | Other | - | Non-Coated | TiCN | Non-Coated | TiN | - | TiN | - | TiAlN | TiAlN | TiN | TiN | TiAlN | Other | - | Non-Coated | TiAlN | TiN | TiN | - | - | Non-Coated | Non-Coated | Non-Coated | Other | Other | TiAlN | TiAlN | - | - | - | TiN | - | TiN | TiAlN | - | - | Non-Coated | DLC |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy