(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Turning Inserts（Page31）
[What is turning?]
A shape is created by rotating the work material and cutting the surface while pressing the cutting edge. Processing methods can be divided into outer diameter processing, threading, inner diameter processing, and cut-off processing. The model numbers written on the insert and holder are codes unique to each tool manufacturer. Understanding how to read the model number provides basic information such as shape, type, and size. In many cases, cutting conditions are written on the label of the insert case, so check it before use.
| Days to Ship |
|
|---|
-
Standard Price: MYR 165.08- Days to Ship: 6 Day(s) or more -
Standard Price: MYR 102.07- Days to Ship: 4 Day(s) or more -
Standard Price: MYR 183.27- Days to Ship: 6 Day(s) or more -
Standard Price: MYR 72.19- Days to Ship: 4 Day(s) or more -
Insert For Bore Type 6-Corner Shoulder Cutter TNKU
OSG
[Features]
· The thick insert gives improved rigidity and together with the positive rake angle provides good cracking resistance and enables the machining of L/D = 5D long protrusions.Standard Price: MYR 124.97- Days to Ship: 9 Day(s) or more -
OSG
[Features]
· 4 tools in one.
Flattening the bases of holes.
High-efficiency machining of internal diameters.Standard Price: MYR 69.35- Days to Ship: 9 Day(s) or more -
Triangle-Shape With Hole, Positive 7°, TCMT-LB, For Light Cutting
SUMITOMO_ELEC_
[Features]
· Breaker for light cutting with excellent sharpness and chip control.Standard Price: MYR 30.37- Days to Ship: 8 Day(s) or more -
Triangle-Shape with Hole, Positive 11°, TPMT-LB, For Light Cutting
SUMITOMO_ELEC_
[Features]
· Breaker for light cutting with excellent sharpness and chip control.Standard Price: MYR 30.37- Days to Ship: 8 Day(s) or more -
Triangle-Shape With Hole, Negative, TNMG-EM, For Medium To Rough Cutting
SUMITOMO_ELEC_
[Features]
· Breaker featuring both excellent chipping-resistance as well as crater wear-resistance.Standard Price: MYR 34.54- Days to Ship: 8 Day(s) or more -
Standard Price: MYR 31.39- Days to Ship: 8 Day(s) or more -
Triangle-Shaped With Hole, Negative, TNMG-FE, For Detailed Cutting
SUMITOMO_ELEC_
[Features]
· Breaker with excellent performance in chip control for low- to high-feed machining.Standard Price: MYR 31.39- Days to Ship: 8 Day(s) or more -
Square-Shape With Hole, Positive 11°, SPMT-LB, For Light Cutting
SUMITOMO_ELEC_
[Features]
· Breaker for light cutting with excellent sharpness and chip control.Standard Price: MYR 35.56- Days to Ship: 8 Day(s) or more -
Square-Shape With Hole, Negative, SNMG-EM, For Medium To Rough Cutting
SUMITOMO_ELEC_
[Features]
· Breaker featuring both excellent chipping-resistance as well as crater wear-resistance.Standard Price: MYR 39.73- Days to Ship: 8 Day(s) or more -
Square-Shape With Hole, Positive 7°, SCMT-LB, For Light Cutting
SUMITOMO_ELEC_
[Features]
· Breaker for light cutting with excellent sharpness and chip control.Standard Price: MYR 38.71- Days to Ship: 8 Day(s) or more -
35° Diamond-Shape With Hole, Positive 5°, VBGT○○○-LB, For Light Cutting
SUMITOMO_ELEC_
[Features]
· Incorporates a specialized carbide base material and Absotech Platinum coating.
· Significantly reduces defects and damage while providing improved wear-resistance in stainless steel machining.Standard Price: MYR 49.41 Days to Ship: 8 Day(s) or more -
35° Diamond-Shape With Hole, Positive 5°, VBGT○○○-SI, For Light Cutting
SUMITOMO_ELEC_
[Features]
· Incorporates Absotech Bronze PVD coating and a specialized, tough carbide base material.
· The high-quality cutting edge reduces adhesion and micro-chipping, allowing for excellent machining surface finish quality.Standard Price: MYR 62.55- Days to Ship: 8 Day(s) or more -
35° Diamond-Shape With Hole, Positive 7°, VCMT-LB, For Light Cutting
SUMITOMO_ELEC_
[Features]
· Breaker for light cutting with excellent sharpness and chip control.Standard Price: MYR 48.07- Days to Ship: 8 Day(s) or more -
55° Diamond-Shape With Hole, Positive 7°, DCGT○○○-FYS, For Finish Cutting
SUMITOMO_ELEC_
[Features]
· Incorporates Absotech Bronze PVD coating and a specialized, tough carbide base material.
· The high-quality cutting edge reduces adhesion and micro-chipping, allowing for excellent machining surface finish quality.Standard Price: MYR 64.99- Days to Ship: 8 Day(s) or more -
55° Diamond-Shape With Hole, Positive 7°, DCMT○○○-LB, For Light Cutting
SUMITOMO_ELEC_
[Features]
· Incorporates a specialized carbide base material and Absotech Platinum coating.
· Significantly reduces defects and damage while providing improved wear-resistance in stainless steel machining.Standard Price: MYR 32.81 Days to Ship: 8 Day(s) or more -
55° Diamond-Shape With Hole, Positive 7°, DCMT-LB, For Light Cutting
SUMITOMO_ELEC_
[Features]
· Breaker for light cutting with excellent sharpness and chip control.Standard Price: MYR 34.28- Days to Ship: 8 Day(s) or more -
80° Diamond-Shape With Hole, Positive 7°, CCGT○○○-FY, For Finish Cutting
SUMITOMO_ELEC_
[Features]
· Incorporates Absotech Bronze PVD coating and a specialized, tough carbide base material.
· The high-quality cutting edge reduces adhesion and micro-chipping, allowing for excellent machining surface finish quality.Standard Price: MYR 69.48 Days to Ship: 8 Day(s) or more -
80° Diamond-Shape With Hole, Positive 7°, CCGT○○○-FYS, For Finish Cutting
SUMITOMO_ELEC_
[Features]
· Incorporates Absotech Bronze PVD coating and a specialized, tough carbide base material.
· The high-quality cutting edge reduces adhesion and micro-chipping, allowing for excellent machining surface finish quality.Standard Price: MYR 69.48 Days to Ship: 8 Day(s) or more -
80° Diamond-Shape With Hole, Positive 7°, CCGT-T○○○-FX, For Finish Cutting
SUMITOMO_ELEC_
[Features]
· Incorporates Absotech Bronze PVD coating and a specialized, tough carbide base material.
· The high-quality cutting edge reduces adhesion and micro-chipping, allowing for excellent machining surface finish quality.Standard Price: MYR 76.79 Days to Ship: 8 Day(s) or more -
80° Diamond-Shape With Hole, Positive 7°, CCMT-LB, For Light Cutting
SUMITOMO_ELEC_
[Features]
· Breaker for light cutting with excellent sharpness and chip control.Standard Price: MYR 29.35- Days to Ship: 8 Day(s) or more -
80° Diamond-Shape With Hole, Positive 11°, CPMT-LB, For Light Cutting
SUMITOMO_ELEC_
[Features]
· Breaker for light cutting with excellent sharpness and chip control.Standard Price: MYR 30.37- Days to Ship: 8 Day(s) or more -
35° Diamond-Shape With Hole, Negative, VNGA○○○, For Medium Cutting
SUMITOMO_ELEC_
[Features]
· TiAIN AICrN nano-level super multi-layer PVD coating provides excellent wear-resistance.
· For machining high-hardness materials.Standard Price: MYR 79.55 Days to Ship: 8 Day(s) or more -
35° Diamond-Shape With Hole, Negative, VNMG-EG, For Medium Cutting
SUMITOMO_ELEC_
[Features]
· General-purpose breaker featuring both high chip control as well as damage resistance.Standard Price: MYR 50.12- Days to Ship: 8 Day(s) or more -
Standard Price: MYR 39.42- Days to Ship: 8 Day(s) or more -
35° Diamond-Shape With Hole, Negative, VNMG-FE, For Detailed Cutting
SUMITOMO_ELEC_
[Features]
· Breaker with excellent performance in chip control for low- to high-feed machining.Standard Price: MYR 39.42- Days to Ship: 8 Day(s) or more -
55° Diamond-Shape With Hole, Negative, DNMG○○○-EM, For Medium To Rough Cutting
SUMITOMO_ELEC_
[Features]
· Incorporates a specialized carbide base material and Absotech Platinum coating.
· Significantly reduces defects and damage while providing improved wear-resistance in stainless steel machining.Standard Price: MYR 45.95- Days to Ship: 8 Day(s) or more -
Standard Price: MYR 30.76- Days to Ship: 8 Day(s) or more -
Standard Price: MYR 30.76- Days to Ship: 8 Day(s) or more -
Standard Price: MYR 24.16- Days to Ship: 8 Day(s) or more -
80° Diamond-Shape With Hole, Negative, CNMG-FE, For Detailed Cutting
SUMITOMO_ELEC_
[Features]
· Breaker with excellent performance in chip control for low- to high-feed machining.Standard Price: MYR 24.16- Days to Ship: 8 Day(s) or more -
80° Diamond-Shape With Hole, Negative, CNMG-EM, For Medium To Rough Cutting
SUMITOMO_ELEC_
[Features]
· Breaker featuring both excellent chipping-resistance as well as crater wear-resistance.Standard Price: MYR 34.54- Days to Ship: 8 Day(s) or more -
Hexagon-Shape With Hole, Positive 11°, WPMT-LB, For Light Cutting
SUMITOMO_ELEC_
[Features]
· Breaker for light cutting with excellent sharpness and chip control.Standard Price: MYR 30.37- Days to Ship: 8 Day(s) or more -
Hexagon-Shape With Hole, Negative, WNMG-EG, For Medium Cutting
SUMITOMO_ELEC_
[Features]
· General-purpose breaker featuring both high chip control as well as damage resistance.Standard Price: MYR 31.39- Days to Ship: 8 Day(s) or more -
Hexagon-Shape With Hole, Negative, WNMG-EM, For Medium To Rough Cutting
SUMITOMO_ELEC_
[Features]
· Breaker featuring both excellent chipping-resistance as well as crater wear-resistance.Standard Price: MYR 34.54- Days to Ship: 8 Day(s) or more -
Standard Price: MYR 24.16- Days to Ship: 8 Day(s) or more -
Hexagon-Shape With Hole, Negative, WNMG-FE, For Detailed Cutting
SUMITOMO_ELEC_
[Features]
· Breaker with excellent performance in chip control for low- to high-feed machining.Standard Price: MYR 24.16- Days to Ship: 8 Day(s) or more -
Insert (For Mini Tool Bits), BT-R
SUMITOMO_ELEC_
[Features]
· Incorporates Absotech Bronze PVD coating and a specialized, tough carbide base material.
· The high-quality cutting edge reduces adhesion and micro-chipping, allowing for excellent machining surface finish quality.Standard Price: MYR 101.73- Days to Ship: 8 Day(s) or more -
GNDS Insert, GCM-N○○○-ML, For Grooving And Cross Feeding
SUMITOMO_ELEC_
[Features]
· Grooving and cross feeding.
· Provides chip control at low feed rates.Standard Price: MYR 54.61- Days to Ship: 8 Day(s) or more -
GNDS Insert, GCM-N○○○-RN, For End Face and Undercut Machining
SUMITOMO_ELEC_
[Features]
· General-purpose type.
· Used for end face and undercut machining.Standard Price: MYR 65.70- Days to Ship: 8 Day(s) or more -
KYOCERA
[Features]
· High film adhesion strength prevents peeling and achieves stable machining
· Hard surface coating: Abrasion resistance is improved with the adoption of a hard surface coating
· High performance α-Al2O3 film: Excellent abrasion resistance and fracture resistance
· High adhesion strength interface: Crystalline structure improvements increase film adhesion strength between each layer
· Fine TiCN coating: Finer TiCN crystals increase hardness and improve abrasion resistanceStandard Price: MYR 38.70 Days to Ship: 6 Day(s) or more -
KYOCERA
[Features]
· High film adhesion strength prevents peeling and achieves stable machining
· Hard surface coating: Abrasion resistance is improved with the adoption of a hard surface coating
· High performance α-Al2O3 film: Excellent abrasion resistance and fracture resistance
· High adhesion strength interface: Crystalline structure improvements increase film adhesion strength between each layer
· Fine TiCN coating: Finer TiCN crystals increase hardness and improve abrasion resistanceStandard Price: MYR 38.70 Days to Ship: 6 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Shape |
| work material |
| Application |
| Available corners |
| Breaker Use |
| Rake angle |
| Nose R |
| Selfishly |
| Groove Width (For Grooving / Plunging) |
| Pitch (for Threading) |
| O.D./ I.D. (For Threading) |
| Screw Types (for threading) |
| Number of threads (for threading) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | KYOCERA | KYOCERA | KYOCERA | KYOCERA | OSG | OSG | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | SUMITOMO_ELEC_ | KYOCERA | KYOCERA |
| Product Series | Small Bore Slotting Tip (for Models GIV, GIV-E, GIV-W), 2 Corner Specification | Small Bore Slotting Tip (for Models GIV, GIV-E, GIV-W), 2 Corner Specification, Full Radius Groove | Small Bore Slotting Tip (for Models GIV, GIV-E), 1 Corner Specification | Triangle-Shape With Hole, Positive 7°, TCMT-LB, For Light Cutting | Triangle-Shape with Hole, Positive 11°, TPMT-LB, For Light Cutting | Triangle-Shape With Hole, Negative, TNMG-EM, For Medium To Rough Cutting | Triangle-Shape With Hole, Negative, TNMG○○○-FB, For Detailed Cutting | Triangle-Shaped With Hole, Negative, TNMG-FE, For Detailed Cutting | Square-Shape With Hole, Positive 11°, SPMT-LB, For Light Cutting | Square-Shape With Hole, Negative, SNMG-EM, For Medium To Rough Cutting | Square-Shape With Hole, Positive 7°, SCMT-LB, For Light Cutting | 35° Diamond-Shape With Hole, Positive 5°, VBGT○○○-LB, For Light Cutting | 35° Diamond-Shape With Hole, Positive 5°, VBGT○○○-SI, For Light Cutting | 35° Diamond-Shape With Hole, Positive 7°, VCMT-LB, For Light Cutting | 55° Diamond-Shape With Hole, Positive 7°, DCGT○○○-FYS, For Finish Cutting | 55° Diamond-Shape With Hole, Positive 7°, DCMT○○○-LB, For Light Cutting | 55° Diamond-Shape With Hole, Positive 7°, DCMT-LB, For Light Cutting | 80° Diamond-Shape With Hole, Positive 7°, CCGT○○○-FY, For Finish Cutting | 80° Diamond-Shape With Hole, Positive 7°, CCGT○○○-FYS, For Finish Cutting | 80° Diamond-Shape With Hole, Positive 7°, CCGT-T○○○-FX, For Finish Cutting | 80° Diamond-Shape With Hole, Positive 7°, CCMT-LB, For Light Cutting | 80° Diamond-Shape With Hole, Positive 11°, CPMT-LB, For Light Cutting | 35° Diamond-Shape With Hole, Negative, VNGA○○○, For Medium Cutting | 35° Diamond-Shape With Hole, Negative, VNMG-EG, For Medium Cutting | 35° Diamond-Shape, Negative, VNMG○○○-FB, For Detailed Cutting | 35° Diamond-Shape With Hole, Negative, VNMG-FE, For Detailed Cutting | 55° Diamond-Shape With Hole, Negative, DNMG○○○-EM, For Medium To Rough Cutting | 55° Diamond-Shape With Hole, Negative, DNMG○○○-FB, For Detailed Cutting | 55° Diamond-Shape With Hole, Negative, DNMG○○○-FE, For Detailed Cutting | 80° Diamond-Shape With Hole, Negative, CNMG○○○-FB, For Detailed Cutting | 80° Diamond-Shape With Hole, Negative, CNMG-FE, For Detailed Cutting | 80° Diamond-Shape With Hole, Negative, CNMG-EM, For Medium To Rough Cutting | Hexagon-Shape With Hole, Positive 11°, WPMT-LB, For Light Cutting | Hexagon-Shape With Hole, Negative, WNMG-EG, For Medium Cutting | Hexagon-Shape With Hole, Negative, WNMG-EM, For Medium To Rough Cutting | Hexagon-Shape With Hole, Negative, WNMG○○○-FB, For Detailed Cutting | Hexagon-Shape With Hole, Negative, WNMG-FE, For Detailed Cutting | GNDS Insert, GCM-N○○○-RN, For End Face and Undercut Machining | |||||||
| CAD | |||||||||||||||||||||||||||||||||||||||||||||
| Days to Ship | 6 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more |
| Shape | Other | Other | Other | Other | T (Triangle) | Other | T (Triangle) | T (Triangle) | T (Triangle) | T (Triangle) | T (Triangle) | S (Rectangular) | S (Rectangular) | S (Rectangular) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | W (Hexagonal Type) | Other | Other | Other | C (80° Diamond-Shape) | C (80° Diamond-Shape) |
| work material | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy / High Hardness Material | Steel / Stainless Steel / High Hardness Material | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy / High Hardness Material | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Stainless Steel | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel | Steel / Stainless Steel | High Hardness Material | Steel / Stainless Steel | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Cast Iron | Cast Iron |
| Application | Grooving / Parting | Grooving / Parting | Grooving / Parting | Grooving / Parting | - | - | - | - | - | Outer Diameter/Inner Diameter | - | - | - | - | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | - | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | - | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | - | - | Outer Diameter/Inner Diameter | - | Outer Diameter/Inner Diameter | - | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | - | - | - | - | - | Outer Diameter/Inner Diameter | - | Outer Diameter/Inner Diameter | Other | Other | - | - |
| Available corners | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Breaker Use | - | - | - | - | - | - | Light Cutting | Light Cutting | Medium to coarse grinding | - | - | Light Cutting | Medium to coarse grinding | Light Cutting | Light Cutting | Light Cutting | Light Cutting | Finish | Light Cutting | - | Finish | Finish | Finish | Light Cutting | Light Cutting | - | Medium grinding | - | - | - | - | - | - | - | Medium to coarse grinding | Light Cutting | Medium grinding | Medium to coarse grinding | - | - | - | - | - | Rough cutting | Rough cutting |
| Rake angle | - | - | - | - | - | - | Pozidriv | Pozidriv | Negative | Negative | Negative | Pozidriv | Negative | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Pozidriv | Negative | Negative | Negative | Negative | - | - | - | Negative | Negative |
| Nose R | Other | 0.2 | Other | 0.2 | 0.8 | - | 0.4 ～ 0.8 | 0.2 ～ 0.8 | 0.8 ～ Other | 0.2 ～ 0.8 | 0.2 ～ 1.2 | 0.4 ～ 0.8 | 0.8 ～ Other | 0.4 ～ 0.8 | 0.2 ～ 0.8 | 0.2 ～ Other | 0.2 ～ 0.8 | 0.2 ～ Other | 0.2 ～ 0.8 | 0.2 ～ 0.8 | 0.2 ～ Other | 0.2 ～ Other | 0.2 ～ Other | 0.2 ～ 0.8 | 0.4 ～ 0.8 | 0.4 ～ 0.8 | 0.4 ～ 1.2 | 0.4 ～ 0.8 | 0.2 ～ 1.2 | 0.8 ～ 1.6 | 0.4 ～ 0.8 | 0.2 ～ 1.2 | 0.2 ～ 0.8 | 0.2 ～ 1.2 | 0.8 ～ Other | 0.4 ～ 0.8 | 0.4 ～ 1.2 | 0.8 ～ 1.2 | 0.2 ～ 0.8 | 0.2 ～ 1.2 | Other | - | - | 0.8 ～ 1.6 | 0.4 ～ 1.2 |
| Selfishly | Right-hand / Left-hand | Right-hand / Left-hand | Left-hand | Left-hand | Right-hand | Right-hand / Left-hand / No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | Right-hand / Left-hand | No-hand | No-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | No-hand | No-hand | - | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | - | - | - | - | - |
| Groove Width (For Grooving / Plunging) | 2 ～ 4 | 1 ～ 5 | 2 | 1 ～ 3.4 | - | 0.2 mm ～ 0.8 mm | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Pitch (for Threading) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| O.D./ I.D. (For Threading) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Screw Types (for threading) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Number of threads (for threading) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Shape
-
work material
-
Application
-
Available corners
-
Breaker Use
-
Rake angle
-
Nose R
-
Selfishly
-
Groove Width (For Grooving / Plunging)
-
Pitch (for Threading)
-
O.D./ I.D. (For Threading)
-
Screw Types (for threading)
-
Number of threads (for threading)
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Related Categories to Turning Inserts
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy