(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
| Days to Ship |
|
|---|

DC Power Relay (60 A and 100 A Type) G9EA-1
OMRON
DC power relay capable of interrupting high voltage high current DC loads.
[Features]
・ Compact size with height 86.7 mm × width 44 mm × length 98 mm, compatible with 400 V DC, 200 A opening and closing (Maximum 400 V DC, 1,000 A can be cut off)
・ The gas filling and sealing structure of the opening/closing part and drive part enables high-capacity load cutoff due to its small size. In addition, arc space-free space saving and safety are realized. At the same time, it achieves high contact reliability of contacts that are not affected by the surrounding atmosphere
・ No restrictions on mounting direction due to miniaturization of parts and proper matching design
・ Assortment of terminal covers required for general industrial machinery
・ UL/CSA standard UL508 acquisition
| Standard Price: | MYR 688.93 |
|---|---|
| Days to Ship: | 5 Day(s) or more |

High-Capacity, High-Voltage Power Relay G7J
OMRON
A multi-pin power relay that achieves high capacity and high voltage and is one step closer to the contactor area.
[Features]
·Its high capacity allows it to be used for not just resistors and inductive loads but also for motor controls.
·No contact chatter occurs even in the event of an momentary voltage drop up to 50% of the rated voltage.
·Achieves withstanding voltage of 4 KV or more between contacts of different polarities as well as between coil and contacts.
·All insulation materials are flame-retardant materials that have passed UL94 V-0 standard.
·Standard product certified by UL and CSA standard.
·Contact gap 3 mm or more (both sides).
[Applications]
·For switch control of compressors and heaters for package air conditioners.
·For switch control of electric tools and various motors.
·For ramp control motor drive and power supply switch control of office equipment such as copiers and fax machines.
· For power controls on packaging equipment and food processing machines.
·For inverter power supply control.
| Standard Price: | MYR 109.43- |
|---|---|
| Days to Ship: | 2 Day(s) or more |

OMRON
Simple programmable relay.
[Features]
·ZEN, which is ideal for simple control, has been upgraded and renewed.
·Full of functions in a compact body (width 70 mm × length 90 mm).
· A single unit combining relay, timer, counter, and time switch functionality.
· No need to individually wire the timer and relay etc., greatly reducing the amount of wiring steps.
· Multiple-day operation and pulse operation have been added. Time control settings are easy to configure, without complicated programming.
· RS-485 communications types also available as part of the product series. Can remotely monitor the ZEN control status.
· Features a counter function that can count up to 8 digits. The maximum count for DC power supply models is 150 Hz.
· The twin-timer function allows you to set ON and OFF times separately, greatly simplifying repetitive operations. Helps reduce the program capacity.
| Standard Price: | MYR 592.92- |
|---|---|
| Days to Ship: | 2 Day(s) |

OMRON
Value Design for Panel compatible product that enhances the value of the control panel.
Equipped with an ideal self-holding function to prevent the heater from overheating, contributing to the safe operation of the device.
[Features]
·Temperature setting with ultra-simple rotary DIP switch
·Digital setting is possible from 0 to 999 degrees Celsius in 1 degree increments using a single unit (Type K8DT-TH1□□) (Digital setting is available for type K8DT-TH2□□ from 0 to 1,800 degrees Celsius in 10 degrees increments)
·Thermocouple and platinum resistance temperature detector (RTD) can be connected
·Push-in Plus terminal that is effective in reducing wiring labor-hours. The use of cage clamps enables wiring with bare stranded wires
·Double insertion hole for crossover wiring (Compatible with all terminals)
·Transistor output type with excellent contact reliability is added
| Standard Price: | MYR 475.41- |
|---|---|
| Days to Ship: | 5 Day(s) or more |

DC Power Relay (200A Type) G9EC-1
OMRON
A DC power relay that is designed with low noise, long lifespan, and environmental resistance to cut off DC loads with high voltage and high current.
[Features]
・ The compact size of height 86.7 mm × width 44 mm × length 98 mm supports 400 V DC, 200 A opening and closing. (Maximum 400 V DC, 1,000 A can be cut off)
・ The gas filling and sealing structure of the opening/closing part and drive part enables high-capacity load cutoff due to its small size. In addition, arc space-free space saving and safety are realized. At the same time, it achieves high contact reliability of contacts that are not affected by the surrounding atmosphere
・ Achieves arc space-free space saving and safety
・ No restrictions on mounting direction due to miniaturization of parts and proper matching design
・ Assortment of terminal covers required for general industrial machinery
・ UL/CSA standard UL508 acquisition
[Applications]
・ Widely available for factory automation and non-factory automation devices
| Standard Price: | MYR 991.50 |
|---|---|
| Days to Ship: | 5 Day(s) or more |

OMRON
A stepping relay unit that allows the step status to be grasped at a glance with the LED display.
[Features]
·Contact relay output allows 2 A (250 V AC, 30 V DC) switching.
·Stepping control suitable for pump control and process control are made into a unit.
·There are 2 types of steps; 6 circuits and 12 circuits.
· Restores to step initial state due to reset input.
·With the retention function that stores the stepping status in the internal memory for 10 days even in the event of a power failure. (The output contact is off state during a power failure.)
·Equipped with a failure detection function that detects on state failures of the built-in relay drive element due to such as external noise. An alarm LED is displayed and an alarm is output at the contact. (Relay contact failure and chip welding failure cannot be detected)
· Terminal block designed with finger protection to prevent electric shocks.
·With LED display that allows the step status to be grasped at a glance.
[Applications]
·Used where sequential circuit switching is required.
| Standard Price: | MYR 772.00- |
|---|---|
| Days to Ship: | 5 Day(s) or more |

OMRON
[Features]
· For built-in use.
· Small 5 to 20A power type with good cost savings.
· Wide range load voltage of AC75 to 264V.
· Use with both 100V, 200V.
· Dedicated aluminum circuit board, use of power element enables small size.
· Superior surge absorption due to built-in varistor.
· Connection uses tab terminals of input #110, output #250.
· UL, CSA, EN (TUV certification) standards acquired (-US type).
| Standard Price: | MYR 71.91- |
|---|---|
| Days to Ship: | 2 Day(s) or more |

OMRON
High-grade power relay with cut-off capacity 110 V DC, 30 A and L/R = 40 ms.
[Features]
·Main contact (2a) that cuts off 110 V DC, 30 A (short-time ratings).
·Built-in auxiliary contacts suitable for answerback (1a, 1b).
·Each terminal is a PCB terminal and mounted to the PCB.
·The main contact terminal can be used for both screw wiring and circuit board wiring.
· Compact and flat due to high density design.
·The insulation materials are flame-retardant and comply with UL94 V-0 standard.
[Applications]
·For use in communication equipment, office equipment, test and measuring instrument, disaster/crime prevention equipment, security devices, etc.
·For use in pole switch units, power supply equipment, industrial equipment, factory automation equipment, etc.
·Mounted to the PCBs and used in a wide range of applications.
| Standard Price: | MYR 290.00 |
|---|---|
| Days to Ship: | 5 Day(s) or more |

OMRON
Other multi-pin power relay in contactor current range that can be opened and closed by energizing 440 V AC / 40 A as a relay.
[Features]
・ 1 pole 40 A can be energized
・ Maximum energization capacity when 4 poles are connected in parallel is 160 A
・ Obtained EN60947-4-1 mirror contact mechanism certification by combining the relay body and auxiliary contact block
・ Designed with few openings to prevent dust and foreign matter from entering
・ Ideal for energizing industrial inverters, servo drivers, etc., and opening and closing power supplies for motors, etc.
・ Compliant with European PV standard (VDE0126)
[Applications]
・ Mainly available for control panels, industrial machines, etc.
| Standard Price: | MYR 183.73- |
|---|---|
| Days to Ship: | 5 Day(s) or more |

Single-Phase Overvoltage/Undervoltage Relay K8AK-VW
OMRON
Ideal for voltage monitoring for industrial facilities and equipment. Monitor for overvoltage and undervoltage simultaneously
■ Features
· Monitor for overvoltage and undervoltage simultaneously. Separate settings and outputs supported for overvoltages and undervoltages.
· Manual resetting and automatic resetting supported by 1 relay.
· Pre-alarm monitoring mode.
· Two 1c output contacts, 5 A at 250 V AC (resistive load).
· Process control signal (0 to 10 V) and current splitter input supported.
· Output status can be monitored using LED indicator.
· Input frequency of 40 to 500 Hz supported.
· Inputs are isolated from the power supply.
| Standard Price: | MYR 1,764.69 |
|---|---|
| Days to Ship: | 5 Day(s) or more |

20 A Full Power Remote Control Relay
PANASONIC
[Features]JIS Standard-compliant20 A full power remote control relay for power distribution board. Please check the rated voltage before ordering.
| Standard Price: | MYR 131.57- |
|---|---|
| Days to Ship: | 10 Day(s) or more |
| Brand |
|---|
| Product Series |
| Days to Ship |
| Application |
| Contact Configuration |
| Latch function |
| Terminal shape |
| Contact rated current (minimum value for AC and DC)(A) |
| Coil rated voltage (DC)(V) |
| Coil rated voltage (AC)(V) |
| Representative Standard |
| Dimension height(mm) |
| Dimension width(mm) |
| Dimension depth(mm) |
| Brand | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON | PANASONIC |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Product Series | |||||||||||
| Days to Ship | 5 Day(s) or more | 2 Day(s) or more | 2 Day(s) | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 2 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 10 Day(s) or more |
| Application | Power | Power | Other | Other | Power | Other | SSR | Power | Power | Other | For Signals |
| Contact Configuration | 1a | Other | - | - | 1a | - | - | 2a | Other | - | 1a ~ 2a |
| Latch function | - | - | - | Available | - | - | - | - | - | NA | NA |
| Terminal shape | Screw Fastening | For Circuit Boards / Tab Terminal / Screw Fastening | Screw Fastening | Other | Screw Fastening | Screw Fastening | Tab Terminal | Other | Screw Fastening | Screw Fastening | Screw Fastening |
| Contact rated current (minimum value for AC and DC)(A) | 60 | 1 | - | - | 200 | - | - | 5 | 40 ~ 40/25 | - | 20 |
| Coil rated voltage (DC)(V) | 12 ~ 24 | 12 ~ 48 | - | - | 24 | - | - | 24 | 24 | - | - |
| Coil rated voltage (AC)(V) | - | 100/120 ~ 200/240 | - | - | - | - | - | - | - | - | 100/200 ~ 200 |
| Representative Standard | UL / CSA | CE / CSA | - | CE / UL | UL / CSA | - | CE / UL / CUL / TUV / CSA | - | CE / UL / TUV / CCC / CSA | CE / UL / CUL / CCC / CSA | - |
| Dimension height(mm) | 67.2 | 57 ~ 64 | 90 | 100 | 86.7 | 76 | 11.5 | 51 | 62 | 95 | 24.5 |
| Dimension width(mm) | 36 | 51.5 | 70 ~ 122.5 | 17.5 | 44 | 91 | 37.5 | 70 | 45 | 22.5 | 96 ~ 106.5 |
| Dimension depth(mm) | 73 | 33.5 ~ 34.5 | 56 | 90 | 98 | 100 | 47.5 | 30 | 60 | 100 | 60 |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy