(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Ceramic Pin Gauge Set CAG Series (with Shank) (Part Numbers)
Ceramic pin gauge has little thermal expansion when held manually use, and is exceptionally workable and economical.
[Features]
· A set of carbide CAA series pin gauges embedded in plastic shanks.
· With a shank attached, measurement can be made with bare hands, and dirt from hands does not adhere. Simple handling due to minimal temperature changes from body temperature.
· Exceptional wear resistance in comparison with steel, and strongly resistant to changes over time, with no need to worry about rust or corrosion, and extremely simple maintenance and management after use.
· Material with a thermal expansion coefficient almost identical to steel. Nonmagnetic material that will not become magnetized.
· 0.01 mm increments. There is little change in plasticity due to scratches or dents and there are no burrs or bulges.
· Material: Ceramic. (Zirconia)
[Applications]
· Used for measuring hole diameter or inspections using micrometers, vernier calipers, etc.
Japanese Only
Part Number
Configured Part Number is shown.
What is pin gauge
It s a pin shaped gauge manufactured with a specific size and durablematerials to insure certain margin tolerance.
The main purpose is to check and determine the diameter of a small hole,
however, it can also be used for geometric deviation measuring.
Precautions before use
- Clean the gauge with benzine or wipe o the anti-rust oil and dirt with
clean cloth before use. - Ensure there is no rust, scratch or burrs.
Precautions when using
- When using pin gauge, make sure there is no burrs or rust on the edge face.
Keep an eye on the temperature difference of measuring object. - Use pin vise or glove for straight pin gauge. Also, keep an eye on the
expansion affect to gauge from body temperature
Precautions after use
- After using, clean and apply oil on the gauge. Make sure it s scratch-free
then place in provided case. - For long-term storing, convey an inspection every half-year, apply anti-rust
oil and keep it at a place with small changes in humidity and temperature.
| Part Number |
|---|
| CAG-0B |
| CAG-1A |
| CAG-1B |
| CAG-2A |
| CAG-2B |
| CAG-3A |
| CAG-3B |
| CAG-4A |
| CAG-4B |
| CAG-5A |
| CAG-5B |
| CAG-6A |
| CAG-6B |
| CAG-7A |
| CAG-7B |
| CAG-8A |
| CAG-8B |
| CAG-9A |
| CAG-9B |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Gauge Diameter | Overall length L (mm) |
|---|---|---|---|---|---|---|
MYR 6,911.30 | 1 Piece(s) | 10 Day(s) or more | 0.50～1.00 | 66/69 | ||
MYR 7,005.83 | 1 Piece(s) | 10 Day(s) or more | 1.00～1.50 | 69 | ||
MYR 7,005.83 | 1 Piece(s) | 10 Day(s) or more | 1.50～2.00 | 69 | ||
MYR 7,478.49 | 1 Piece(s) | 10 Day(s) or more | 2.00～2.50 | 69 | ||
MYR 7,478.49 | 1 Piece(s) | 10 Day(s) or more | 2.50～3.00 | 69 | ||
MYR 7,714.80 | 1 Piece(s) | 10 Day(s) or more | 3.00～3.50 | 69/71 | ||
MYR 7,714.80 | 1 Piece(s) | 10 Day(s) or more | 3.50～4.00 | 71 | ||
MYR 8,187.47 | 1 Piece(s) | 10 Day(s) or more | 4.00～4.50 | 71 | ||
MYR 8,187.47 | 1 Piece(s) | 10 Day(s) or more | 4.50～5.00 | 71/76 | ||
MYR 8,801.92 | 1 Piece(s) | 10 Day(s) or more | 5.00～5.50 | 76 | ||
MYR 8,801.92 | 1 Piece(s) | 10 Day(s) or more | 5.50～6.00 | 76 | ||
MYR 9,463.64 | 1 Piece(s) | 10 Day(s) or more | 6.00～6.50 | 76 | ||
MYR 9,463.64 | 1 Piece(s) | 10 Day(s) or more | 6.50～7.00 | 76 | ||
MYR 9,841.75 | 1 Piece(s) | 10 Day(s) or more | 7.00～7.50 | 76 | ||
MYR 9,841.75 | 1 Piece(s) | 10 Day(s) or more | 7.50～8.00 | 76 | ||
MYR 10,172.61 | 1 Piece(s) | 10 Day(s) or more | 8.00～8.50 | 76 | ||
MYR 10,172.61 | 1 Piece(s) | 10 Day(s) or more | 8.50～9.00 | 76 | ||
MYR 10,928.87 | 1 Piece(s) | 10 Day(s) or more | 9.00～9.50 | 76 | ||
MYR 10,928.87 | 1 Piece(s) | 10 Day(s) or more | 9.50～10.00 | 76 |
Loading...
Basic Information
| Product Model | Pin Gauge | Set / Single Item Classfication | Set Parts | Material | Ceramic |
|---|---|---|---|---|---|
| Number of Sets(Pieces) | 51 | Dimension Classification(mm) | 0.01 increment | Diameter Accuracy(µm) | ±1 |
| Roundness / Cylindricity(µm) | 0.8 | Remark | It is a set of plastic shank embedded with ceramic CAA pin gauge. | Features | · The material has exceptional abrasion resistance in comparison with steel and is extremely resistant to aging. · No need to worry about rust or corrosion, with extremely simple maintenance and management after use. · The material has a thermal expansion coefficient that is about same as that of steel. · No need to worry about it becoming magnetically charged, as it is made of non-magnetic material. · There is little change in plasticity due to scratches or dents and there are no burrs or bulking. · The upper surface is lapping finished. |
Specification/Dimensions
-
Gauge Diameter
-
type
- CAG
Days to Ship
-
- All
- 10 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Gauge Steel Pin Gauge Sub Zero Treated
- Ceramic Pin Gauge
- [For Pin Gauge] Pin vise EA725SJ-4
- Pin Gauge EP Series
- Single Steel Pin Gauge PM Series Minus
- Pin Gauge Set For + or - Tolerance (0.025 Step) DM Series
- Pin Gauge Set For + or - Tolerance (0.10 Step) DM Series
- Pin Gauge (Nominal Dimension From 20 mm, 0.01 mm Step) 50‑mm Length DF Series
Customers Who Viewed This Item Also Viewed
-
Steel Pin Gauge Set AG Series (with Shank)NIIGATASEIKI
Standard Price : MYR 2,232.01-
Days to Ship : 22 Day(s) or more
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy