Pulsation Test Pump (Electric)
Part Number: MP300

[Features]
· Using hydrostatic pressure, with test pressure that can be increased and decreased, even leakage points that are normally difficult to locate can be found easily.
· A single unit is capable of testing pulsation water pressure and hydrostatic pressure.
[Applications]
· For discovering problems with insertion or insufficient tightening of mechanical fittings for cross-linked polyethylene pipe or polybutylene pipe joining.
· For identifying missing or insufficient adhesive when connecting PVC pipes.
· For detecting defective brazing of copper pipes.
· For pressure leakage testing of various piping, such as water supply, resin hot water supply hoses, various mechanical fittings, etc.

Specifications of MP300

• Product Type

  Electric

• Noise value(dB)

  -

• JAN Code

  13

• Trusco Code

  455-0595

• Features

  Using hydrostatic pressure that can be increased and decreased, difficult-to-find leakage points can also be easily found.

• Application

  For discovering problems with insertion or insufficient tightening of mechanical fittings for cross-linked polyethylene pipe or polybutylene pipe joining. For discovering problems when too little or no adhesive has been applied when joining polyvinyl chloride pipes.

• Discharge Quantity 50/60 Hz(L/min)

  3/3.7

• Output(W)

  200

• Maximum Pressure(MPa)

  2.5 (For Still Water), 2 (When Pulsed)

• Power Supply

  100V

• Accessory

  Pressure Gauge Unit / Water Adsorption Hose 2.6 m / High Pressure Hose 1 m / Relief Hose 2.6 m / Filter / Storage Case

• Water Intake Diameter

  G1/2

• Outlet Port Dia.

  G1/4

• Adapter

  PT1/2

• Pulsation Frequency

  24 times/min

Please check the type/dimensions/specifications of the part MP300 in the Pulsation Test Pump (Electric) series.