(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Brass Tightening Fitting - Straight - for Sputtering Resistance (Part Numbers)
Special brass is used for metal body to greatly improve corrosion resistance to water.
[Features]
· Special brass is used for metal body.
· Corrosion resistance to water has been greatly increased.
· Ideal for use in the automobile industry and for mold temperature control.
· Never worry about forgetting or losing the sleeve again with this no-sleeve design.
· A wide variety is available to support a wide range of applications.
· 5 shapes: Types C, CF, MF, L and E. Adjustable tube: 10 types are available from φ4 to φ16mm.
Japanese Only
Part Number
Configured Part Number is shown.
Specifications Of All Brass Compression Fitting - Straight
Appearance of All Brass Compression Fitting - Straight
Dimensional drawing of All Brass Compression Fitting - Straight
Usable fluids: air, water, other*
Maximum operating pressure: depends on the maximum operating pressure of the tube
Operating vacuum pressure: -100 kPa
Operating temperature range: depends on the specification range of the tube (no freezing)
- *For fluids other than air and water, compliance with the specifications may vary depending on usage conditions, so please check before using.
- *When using water or other liquids, make sure the surge pressure stays below the maximum operating pressure.
- *The operating temperature range depends on the operating temperature of the tube that is used, but when used at high temperature, there is a risk of damage if an excessive load is applied to the main body.
Compatible Sizes
| Millimeter Size (mm) | ø4 × ø2.5, ø6 × ø4, ø8 × ø5, ø8 × ø6, ø10 × ø6.5, ø10 × ø7.5, ø12 × ø8, ø12 × ø9, ø16 × ø11, ø16 × ø13 |
|---|
Tube size (outer diameter × internal diameter)
Thread size
Taper pipe male thread: R1/8, R1/4, R3/8, R1/2
Taper pipe female thread: Rc1/8, Rc1/4, Rc3/8, Rc1/2
| Format | Tube Outer Diameter × Internal Diameter øD | R | A | B | L | E | C | Opposite Side H1 | Opposite Side H2 | Effective Cross-Sectional Area (mm2) | Mass (g) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| NKC0425-01 | 4 × 2.5 | R1/8 | 8 | 21.5 | 17.5 | 10.5 | 5.5 | 8 | 10 | 1 | 8.1 |
| NKC0425-02 | R1/4 | 11 | 25.5 | 19.5 | 14 | 14 | |||||
| NKC0640-01 | 6 × 4 | R1/8 | 8 | 22 | 18 | 11 | 6 | 10 | 10 | 5.5 | 9.7 |
| NKC0640-02 | R1/4 | 11 | 26 | 20 | 14 | 16 | |||||
| NKC0640-03 | R3/8 | 12 | 28 | 21.7 | 17 | 25 | |||||
| NKC0850-01 | 8 × 5 | R1/8 | 8 | 24 | 20 | 12 | 7 | 12 | 12 | 10 | 14 |
| NKC0850-02 | R1/4 | 11 | 27 | 21 | 14 | 18 | |||||
| NKC0850-03 | R3/8 | 12 | 29 | 22.7 | 17 | 27 | |||||
| NKC0860-01 | 8 × 6 | R1/8 | 8 | 24 | 20 | 12 | 7 | 12 | 12 | 15 | 14 |
| NKC0860-02 | R1/4 | 11 | 27 | 21 | 14 | 18 | |||||
| NKC0860-03 | R3/8 | 12 | 29 | 22.7 | 17 | 27 | |||||
| NKC1065-02 | 10 × 6.5 | R1/4 | 11 | 29.8 | 23.8 | 14.8 | 9 | 16 | 16 | 15 | 29 |
| NKC1065-03 | R3/8 | 12 | 31.8 | 25.5 | 17 | 36 | |||||
| NKC1065-04 | R1/2 | 15 | 35.8 | 27.6 | 21 | 57 | |||||
| NKC1075-02 | 10 × 7.5 | R1/4 | 11 | 29.8 | 23.8 | 14.8 | 9 | 16 | 16 | 21 | 29 |
| NKC1075-03 | R3/8 | 12 | 31.8 | 25.5 | 17 | 36 | |||||
| NKC1075-04 | R1/2 | 15 | 35.8 | 27.6 | 21 | 56 | |||||
| NKC1280-02 | 12 × 8 | R1/4 | 11 | 30.4 | 24.4 | 15.4 | 9 | 17 | 17 | 26 | 30 |
| NKC1280-03 | R3/8 | 12 | 32.4 | 26.1 | 37 | ||||||
| NKC1280-04 | R1/2 | 15 | 36.4 | 28.2 | 21 | 56 | |||||
| NKC1290-02 | 12 × 9 | R1/4 | 11 | 30.4 | 24.4 | 15.4 | 9 | 17 | 17 | 35 | 30 |
| NKC1290-03 | R3/8 | 12 | 32.4 | 26.1 | 36 | ||||||
| NKC1290-04 | R1/2 | 15 | 36.4 | 28.2 | 21 | 56 | |||||
| NKC1611-03 | 16 × 11 | R3/8 | 12 | 35.2 | 28.9 | 16.2 | 9.5 | 23 | 23 | 50 | 68 |
| NKC1611-04 | R1/2 | 15 | 38.2 | 30 | 77 | ||||||
| NKC1613-03 | 16 × 13 | R3/8 | 12 | 35.2 | 28.9 | 16.2 | 9.5 | 23 | 23 | 70 | 67 |
| NKC1613-04 | R1/2 | 15 | 38.2 | 30 | 76 |
Units: mm
- *L dimensions are reference dimensions after tightening with screws.
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Nominal of Thread | Tube Outer Dia. (mm) | Tube Inner Dia. (mm) |
|---|---|---|---|---|---|---|---|
MYR 11.39 | 10 Piece(s) | 11 Day(s) or more | 1/8 | 4 | 2.5 | ||
MYR 12.92 | 10 Piece(s) | 9 Day(s) or more | 1/4 | 4 | 2.5 | ||
MYR 11.12 | 1 Piece(s) | 2 Day(s) | 1/8 | 6 | 4 | ||
MYR 13.35 | 10 Piece(s) | 4 Day(s) or more | 1/4 | 6 | 4 | ||
MYR 15.13 | 10 Piece(s) | 11 Day(s) or more | 3/8 | 6 | 4 | ||
MYR 12.92 | 10 Piece(s) | 11 Day(s) or more | 1/8 | 8 | 5 | ||
MYR 15.69 | 10 Piece(s) | 9 Day(s) or more | 3/8 | 8 | 5 | ||
MYR 12.86 | 1 Piece(s) | 2 Day(s) | 1/8 | 8 | 6 | ||
MYR 19.21 | 1 Piece(s) | 9 Day(s) | 1/4 | 8 | 6 | ||
MYR 15.69 | 10 Piece(s) | 11 Day(s) or more | 3/8 | 8 | 6 | ||
MYR 16.69 | 10 Piece(s) | 11 Day(s) or more | 1/4 | 10 | 6.5 | ||
MYR 17.83 | 10 Piece(s) | 9 Day(s) or more | 3/8 | 10 | 6.5 | ||
MYR 23.54 | 10 Piece(s) | 9 Day(s) or more | 1/2 | 10 | 6.5 | ||
MYR 23.71 | 1 Piece(s) | 2 Day(s) | 1/4 | 10 | 7.5 | ||
MYR 17.61 | 10 Piece(s) | 4 Day(s) or more | 3/8 | 10 | 7.5 | ||
MYR 23.52 | 10 Piece(s) | 11 Day(s) or more | 1/2 | 10 | 7.5 | ||
MYR 18.07 | 10 Piece(s) | 9 Day(s) or more | 1/4 | 12 | 8 | ||
MYR 18.79 | 10 Piece(s) | 19 Day(s) or more | 3/8 | 12 | 8 | ||
MYR 24.02 | 10 Piece(s) | 16 Day(s) or more | 1/2 | 12 | 8 | ||
MYR 26.01 | 10 Piece(s) | 4 Day(s) or more | 1/4 | 12 | 9 | ||
MYR 24.02 | 10 Piece(s) | 9 Day(s) or more | 1/2 | 12 | 9 | ||
MYR 27.18 | 10 Piece(s) | 9 Day(s) or more | 3/8 | 16 | 11 | ||
MYR 28.82 | 10 Piece(s) | 2 Day(s) or more | 1/2 | 16 | 11 | ||
MYR 27.15 | 10 Piece(s) | 9 Day(s) or more | 3/8 | 16 | 13 | ||
MYR 28.78 | 10 Piece(s) | 11 Day(s) or more | 1/2 | 16 | 13 |
Loading...
Basic Information
| Material | Special Brass | Connection Types | Screw⇔Tube Connection | Screw-to-Tube Connection Shape | Male Straight |
|---|---|---|---|---|---|
| Screw Types | R | Surface Treatment | No |
Specification/Dimensions
-
Nominal of Thread
-
Tube Outer Dia.(mm)
-
Tube Inner Dia.(mm)
-
type
- NKC
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 2 Day(s) or Less
- 4 Day(s) or Less
- 9 Day(s) or Less
- 11 Day(s) or Less
- 16 Day(s) or Less
- 19 Day(s) or Less
Specify Alterations
- Orders should be placed in units of 10 pieces.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Couplings with Tube Insert - Nut and Sleeve Integrated Type - Union Elbows
- for Sputtering Resistant, Brass Tightening Fitting, Female Bulkhead Straight
- Junron Stainless Fitting US2 Series Elbow for Flexible Tubes
- Quick Seal Series Insert Type (Brass) Service Tee (mm Size)
- QuickSeal Series, Nylon Coil Tube Dedicated Type, ES Swivel Nut Female Connector
- Quick Seal Series Insert Type (Brass) Service Tee (Inch Size)
- SUS316 Insert Fittings KFG2 Series, Union Nut KFG2N
- Quick Seal Fitting (Connector)
Customers Who Viewed This Item Also Viewed
-
Brass Tightening Coupler Elbow for Sputter ResistancePISCO
Standard Price : MYR 24.54-
Days to Ship : 2 Day(s) or more
-
Corrosion Resistant - Tightening Fittings SUS316 - StraightPISCO
Standard Price : MYR 56.89-
Days to Ship : 1 Day(s) or more
-
Couplings with Tube Insert - Nut and Sleeve Integrated Type - ConnectorsMISUMI
Standard Price : MYR 7.92-
Days to Ship : 2 Day(s) or more
-
-
Couplings for Tubes - Nut and Sleeve Integrated Type - NipplesMISUMI
Standard Price : MYR 18.66-
Days to Ship : 4 Day(s) or more
-
for Sputtering Resistant, Brass Tightening Fitting, Tightening NutPISCO
Standard Price : MYR 5.14-
Days to Ship : 9 Day(s) or more
-
Couplings for Tubes - Nut and Sleeve Integrated Type - StraightMISUMI
Standard Price : MYR 32.40-
Days to Ship : 1 Day(s) or more
-
Quick Seal Series Insert Type (Brass Specifications) Connector (Inch Size)NITTA
Standard Price : MYR 12.71-
Days to Ship : 4 Day(s) or more
-
-
Couplings for Tubes - Nut and Sleeve Integrated Type - Half UnionsMISUMI
Standard Price : MYR 46.36-
Days to Ship : 4 Day(s) or more
-
Minimal Fitting, Tightening StraightPISCO
Standard Price : MYR 5.36-
Days to Ship : 1 Day(s) or more
-
Corrosion-Resistant SUS316 Tightening Fitting, Female StraightPISCO
Standard Price : MYR 62.58-
Days to Ship : 1 Day(s) or more
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy