(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Carbide Runner Groove End Mill for Trapezoidal Runner Groove / Free Blade Diameter Specification Type / Fixed Blade Diameter Type / 2-flute
[Features]
·Essential item for plastic runner fluting
Selectable from free cutting diameter blade type and fixed cutting diameter blade diameter type
·Single angle θ 5°· 7°· 10°· 12°· 15° selectable
Part Number
Configured Part Number is shown.
| Part Number |
|---|
| F-RTREM1.5-[1.6-1.9/0.1]-[5,7,10,12,15]-[0,0.3] |
| F-RTREM2-[2.1-2.4/0.1]-[5,7,10,12,15]-[0,0.3,0.5] |
| F-RTREM2.5-[2.6-2.9/0.1]-[5,7,10,12,15]-[0,0.5] |
| F-RTREM3-[3.1-3.4/0.1]-[5,7,10,12,15]-[0,0.5] |
| F-RTREM3.5-[3.6-3.9/0.1]-[5,7,10,12,15]-[0,0.5] |
| F-RTREM4-[4.1-4.4/0.1]-[5,7,10,12,15]-[0,0.5,1] |
| F-RTREM4.5-[4.6-4.9/0.1]-[5,7,10,12,15]-[0,0.5,1] |
| F-RTREM5-[5.1-5.4/0.1]-[5,7,10,12,15]-[0,0.5,1] |
| F-RTREM6-[6.1-6.4/0.1]-[5,7,10,12,15]-[0,0.5,1] |
| RTREM1.5-[5,7,10,12,15]-[0,0.3] |
| RTREM2-[5,7,10,12,15]-[0,0.3,0.5] |
| RTREM2.5-[5,7,10,12,15]-[0,0.5] |
| RTREM3-[5,7,10,12,15]-[0,0.5] |
| RTREM3.5-[5,7,10,12,15]-[0,0.5] |
| RTREM4-[5,7,10,12,15]-[0,0.5,1] |
| RTREM4.5-[5,7,10,12,15]-[0,0.5,1] |
| RTREM5-[5,7,10,12,15]-[0,0.5,1] |
| RTREM6-[5,7,10,12,15]-[0,0.5,1] |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | No. | Blade Diameter (mm) | Single Angle (θ) (°) | Corner (R) (mm) | Flute Diameter (D) (mm) | Overall Length L (mm) | Blade length l (mm) | Shank diameter d θ5° (mm) | Shank diameter d θ7° (mm) | Shank diameter d θ10° (mm) | Shank diameter d θ12° (mm) | Shank diameter d θ15° (mm) | Blade length l θ5° (mm) | Blade length l θ7° (mm) | Blade length l θ10° (mm) | Blade length l θ12° (mm) | Blade length l θ15° (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | 6 Day(s) or more | 1.5 | - | 5 | 0 | 1.6 ～ 1.9 | 37 to 40 | - | 4 | 4 | 4 | 4 | 4 | 0.7 to 2.4 | 1.4 to 2.6 | 1.9 to 2.7 | 2.1 to 2.8 | 2.3 to 2.8 | ||
- | 1 Piece(s) | 6 Day(s) or more | 2 | - | 5 | 0 | 2.1 ～ 2.4 | 37 to 40 | - | 4 | 4 | 4 | 4 | 4 | 1.2 to 2.9 | 1.9 to 3.1 | 2.4 to 3.2 | 2.6 to 3.3 | 2.8 to 3.3 | ||
- | 1 Piece(s) | 6 Day(s) or more | 2.5 | - | 5 | 0 | 2.6 ～ 2.9 | 42 to 45 | - | 6 | 6 | 6 | 6 | 6 | 2.2 to 3.9 | 2.9 to 4.1 | 3.4 to 4.2 | 3.6 to 4.3 | 3.8 to 4.3 | ||
- | 1 Piece(s) | 6 Day(s) or more | 3 | - | 5 | 0 | 3.1 ～ 3.4 | 42 to 45 | - | 6 | 6 | 6 | 6 | 6 | 2.7 to 4.4 | 3.4 to 4.6 | 3.9 to 4.7 | 4.1 to 4.8 | 4.3 to 4.8 | ||
- | 1 Piece(s) | 6 Day(s) or more | 3.5 | - | 5 | 0 | 3.6 ～ 3.9 | 47 to 50 | - | 6 | 6 | 6 | 8 | 8 | 3.7 to 5.4 | 4.4 to 5.6 | 4.9 to 5.7 | 5.1 to 5.8 | 5.3 to 5.8 | ||
- | 1 Piece(s) | 6 Day(s) or more | 4 | - | 5 | 0 | 4.1 ～ 4.4 | 47 to 50 | - | 6 | 6 | 8 | 8 | 8 | 4.2 to 5.9 | 4.9 to 6.1 | 5.4 to 6.2 | 5.6 to 6.3 | 5.8 to 6.3 | ||
- | 1 Piece(s) | 6 Day(s) or more | 4.5 | - | 5 | 0 | 4.6 ～ 4.9 | 52 to 55 | - | 6 | 8 | 8 | 8 | 10 | 5.2 to 6.9 | 5.9 to 7.1 | 6.4 to 7.2 | 6.6 to 7.3 | 6.8 to 7.3 | ||
- | 1 Piece(s) | 6 Day(s) or more | 5 | - | 5 | 0 | 5.1 ～ 5.4 | 57 to 60 | - | 8 | 8 | 8 | 10 | 10 | 5.7 to 7.4 | 6.4 to 7.6 | 6.9 to 7.7 | 7.1 to 7.8 | 7.3 to 7.8 | ||
- | 1 Piece(s) | 6 Day(s) or more | 6 | - | 5 | 0 | 6.1 ～ 6.4 | 57 to 60 | - | 8 | 10 | 10 | 10 | 12 | 6.7 to 8.4 | 7.4 to 8.6 | 7.9 to 8.7 | 8.1 to 8.8 | 8.3 to 8.8 | ||
- | 1 Piece(s) | 6 Day(s) or more | - | 1.5 | 5 | 0 | - | 40 | 3 | 4 | 4 | 4 | 4 | 4 | - | - | - | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | - | 2 | 5 | 0 | - | 40 | 3.5 | 4 | 4 | 4 | 4 | 4 | - | - | - | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | - | 2.5 | 5 | 0 | - | 45 | 4.5 | 6 | 6 | 6 | 6 | 6 | - | - | - | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | - | 3 | 5 | 0 | - | 45 | 5 | 6 | 6 | 6 | 6 | 6 | - | - | - | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | - | 3.5 | 5 | 0 | - | 50 | 6 | 6 | 6 | 6 | 8 | 8 | - | - | - | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | - | 4 | 5 | 0 | - | 50 | 6.5 | 6 | 6 | 8 | 8 | 8 | - | - | - | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | - | 4.5 | 5 | 0 | - | 55 | 7.5 | 6 | 8 | 8 | 8 | 10 | - | - | - | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | - | 5 | 5 | 0 | - | 60 | 8 | 8 | 8 | 8 | 10 | 10 | - | - | - | - | - | ||
- | 1 Piece(s) | 6 Day(s) or more | - | 6 | 5 | 0 | - | 60 | 9 | 8 | 10 | 10 | 10 | 12 | - | - | - | - | - |
Loading...
Specifications
Model Number
F-RTREM
| No. | Flute Diameter D 0.1 mm Increment Designation |
Single Angle θ (Selection) |
Corner R (Selection) |
Blade Length ℓ |
Overall Length L |
Shank Diameter d |
|||||||||||
| θ5° | θ7° | θ10° | θ12° | θ15° | θ5° | θ7° | θ10° | θ12° | θ15° | ||||||||
| 1.5 | 1.6 ~ 1.9 | 0 | 0.3 | 0.7 ~ 2.4 | 1.4 ~ 2.6 | 1.9 ~ 2.7 | 2.1 ~ 2.8 | 2.3 ~ 2.8 | 37 ~ 40 | 4 | 4 | 4 | 4 | 4 | |||
| 2 | 2.1 ~ 2.4 | 0 | 0.3 | 0.5 | 1.2 ~ 2.9 | 1.9 ~ 3.1 | 2.4 ~ 3.2 | 2.6 ~ 3.3 | 2.8 ~ 3.3 | 37 ~ 40 | 4 | 4 | 4 | 4 | 4 | ||
| 2.5 | 2.6 ~ 2.9 | 5° | 0 | 0.5 | 2.2 ~ 3.9 | 2.9 ~ 4.1 | 3.4 ~ 4.2 | 3.6 ~ 4.3 | 3.8 ~ 4.3 | 42 ~ 45 | 6 | 6 | 6 | 6 | 6 | ||
| 3 | 3.1 ~ 3.4 | 7° | 0 | 0.5 | 2.7 ~ 4.4 | 3.4 ~ 4.6 | 3.9 ~ 4.7 | 4.1 ~ 4.8 | 4.3 ~ 4.8 | 42 ~ 45 | 6 | 6 | 6 | 6 | 6 | ||
| 3.5 | 3.6 ~ 3.9 | 10° | 0 | 0.5 | 3.7 ~ 5.4 | 4.4 ~ 5.6 | 4.9 ~ 5.7 | 5.1 ~ 5.8 | 5.3 ~ 5.8 | 47 ~ 50 | 6 | 6 | 6 | 8 | 8 | ||
| 4 | 4.1 ~ 4.4 | 12° | 0 | 0.5 | 1 | 4.2 ~ 5.9 | 4.9 ~ 6.1 | 5.4 ~ 6.2 | 5.6 ~ 6.3 | 5.8 ~ 6.3 | 47 ~ 50 | 6 | 6 | 8 | 8 | 8 | |
| 4.5 | 4.6 ~ 4.9 | 15° | 0 | 0.5 | 1 | 5.2 ~ 6.9 | 5.9 ~ 7.1 | 6.4 ~ 7.2 | 6.6 ~ 7.3 | 6.8 ~ 7.3 | 52 ~ 55 | 6 | 8 | 8 | 8 | 10 | |
| 5 | 5.1 ~ 5.4 | 0 | 0.5 | 1 | 5.7 ~ 7.4 | 6.4 ~ 7.6 | 6.9 ~ 7.7 | 7.1 ~ 7.8 | 7.3 ~ 7.8 | 57 ~ 60 | 8 | 8 | 8 | 10 | 10 | ||
| 6 | 6.1 ~ 6.4 | 0 | 0.5 | 1 | 6.7 ~ 8.4 | 7.4 ~ 8.6 | 7.9 ~ 8.7 | 8.1 ~ 8.8 | 8.3 ~ 8.8 | 57 ~ 60 | 8 | 10 | 10 | 10 | 12 | ||
[ ! ]As the blade diameter is specified from RTREM (fixed blade diameter type), the blade length and total length will be shorter by the specified amount of the blade diameter.
Model Number
RTREM
| Flute Diameter D |
Single Angle θ (Selection) |
Corner R (Selection) |
Blade Length ℓ |
Overall Length L |
Shank Diameter d |
|||||||
| θ5° | θ7° | θ10° | θ12° | θ15° | ||||||||
| 1.5 | 0 | 0.3 | 3 | 40 | 4 | 4 | 4 | 4 | 4 | |||
| 2 | 0 | 0.3 | 0.5 | 3.5 | 40 | 4 | 4 | 4 | 4 | 4 | ||
| 2.5 | 5° | 0 | 0.5 | 4.5 | 45 | 6 | 6 | 6 | 6 | 6 | ||
| 3 | 7° | 0 | 0.5 | 5 | 45 | 6 | 6 | 6 | 6 | 6 | ||
| 3.5 | 10° | 0 | 0.5 | 6 | 50 | 6 | 6 | 6 | 8 | 8 | ||
| 4 | 12° | 0 | 0.5 | 1 | 6.5 | 50 | 6 | 6 | 8 | 8 | 8 | |
| 4.5 | 15° | 0 | 0.5 | 1 | 7.5 | 55 | 6 | 8 | 8 | 8 | 10 | |
| 5 | 0 | 0.5 | 1 | 8 | 60 | 8 | 8 | 8 | 10 | 10 | ||
| 6 | 0 | 0.5 | 1 | 9 | 60 | 8 | 10 | 10 | 10 | 12 | ||
More Information
Alterations
Basic Information
| Material | Carbide | Torsion Angle | Standard torsion 30° |
|---|
Specification/Dimensions
-
No.
- 1.5
- 2
- 2.5
- 3
- 3.5
- 4
- 4.5
- 5
- 6
-
Blade Diameter(mm)
- 1.5
- 2
- 2.5
- 3
- 3.5
- 4
- 4.5
- 5
- 6
-
Single Angle (θ)(°)
-
Corner (R)(mm)
-
Flute Diameter (D)(mm)
[1.6-1.9/0.1mm Unit(s)][2.1-2.4/0.1mm Unit(s)][2.6-2.9/0.1mm Unit(s)][3.1-3.4/0.1mm Unit(s)][3.6-3.9/0.1mm Unit(s)][4.1-4.4/0.1mm Unit(s)][4.6-4.9/0.1mm Unit(s)][5.1-5.4/0.1mm Unit(s)][6.1-6.4/0.1mm Unit(s)]
-
type
- F-RTREM
- RTREM
Days to Ship
-
- All
- 6 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Carbide End Mill for Runner Groove, for Taper Ball Runner Groove / 2-flute
- T-Slot Cutter
- Carbide Dove Tail Cutter with Round Chamfering for O-Ring
- SCO Side Cutter G2
- Runner Mill (For Table Type Runners) RM2
- Carbide Solid Trapezoid Runner End Mill CRM-2
- Carbide Solid Trapezoid Runner End Mill (P Coating) CRM-P
- Counterbore for Punch PCB
Customers Who Viewed This Item Also Viewed
-
Carbide End Mill for Runner Groove, for Taper Ball Runner Groove / 2-fluteMISUMI
Standard Price : MYR 430.38-
Days to Ship : 4 Day(s) or more
-
Cutter for Sprue/Runner Lock, Reverse Taper / 2-flute / Straight EdgeMISUMI
Days to Ship : 6 Day(s) or more
-
TSC series carbide end mill for runner grooves, for trapezoid runner grooves / 2-fluteMISUMI
Standard Price : MYR 330.26-
Days to Ship : 4 Day(s) or more
-
Runner Mill (For Table Type Runners) RM2EIKOSHA
Standard Price : MYR 272.66-
Days to Ship : 4 Day(s) or more
-
Carbide Solid Trapezoid Runner End Mill (P Coating) CRM-PEIKOSHA
Standard Price : MYR 417.65-
Days to Ship : 4 Day(s) or more
-
TSC series carbide tapered end mill, 2-flute / regular modelMISUMI
Standard Price : MYR 244.91-
Days to Ship : 4 Day(s) or more
-
-
Carbide Solid Trapezoid Runner End Mill CRM-2EIKOSHA
Standard Price : MYR 348.69-
Days to Ship : 4 Day(s) or more
-
Carbide Straight Edge Inverted Taper End Mill, 2-flute / Inverted Taper, Side Straight Edge TypeMISUMI
Days to Ship : 6 Day(s) or more
-
-
TSC series carbide end mill for runner grooves, for tapered ball runner grooves / 2-fluteMISUMI
Standard Price : MYR 379.91-
Days to Ship : 4 Day(s) or more
-
MTE230 MUGEN-COATING Tapered End MillNS TOOL
Standard Price : MYR 298.07-
Days to Ship : 5 Day(s) or more
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy