(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Cable KQE 60 V Cross-linked Polyethylene Insulation (Part Numbers)
Click this image to zoom it.
Move the mouse over the image to zoom
• KQE Low voltage single core cable.
• Conductor structure is Tin Plated Annealed Copper Stranded Wire
• Insulated cable is Cross-linked Polyethylene material as RoHS complied wires.
• 60V cable for weak current circuit.
• Operating temperature range is 0-80℃.
• 6 cable colors are available W (White), BK (Black), R (Red), BE (Blue), Y (Yellow) and GN (Green)
• Can order cable for 4 sizes of length. (10m, 50m, 100m and 400m)
• Minimum bending radius is 8 times of finished outer diameter. (Fixed Part Only)
- Strand Wire
- Less than 100 V
● Does not melt under heat of soldering irons or similar and allows for easy connection of electric device wiring.
·Be careful not to confuse total length and quantity when ordering.
The Electrical Appliance and Material Safety Law certificate has not been obtained.
Part Number
Configured Part Number is shown.
KQE-0.3-Y-100
Specifications
| Model | Section Area |
| KQE | 0.2*(AWG24) |
| 00.3 * (AWG22) | |
| 00.5 * (AWG20) | |
| 0.75 * (AWG18) |
Be sure to read the following precautions when you place an order.
* Length in "m" is included in our part numbers. Always specify quantity as number of units, not as meters.
More Information
| Operating Temperature Range | 0 ~ 80°C |
| Bending | Finished Outer Diameter x 8 (Fixed Part Only) |
| Model | Section Area (mm2) | Color | Total Length (m) | Conductor | Polyethylene Insulator Thickness (mm) | Finished Outer Diameter Approx. (mm) | Electrical Properties | Approximate Weight (kg/km) | ||||
| Structure (Strands / mm) | Outer Diameter (mm) | Conductor Resistance Ω / km (20°C) | Insulation Properties MΩkm (20°C) | Test Voltage V / Min | Allowable Current A (30°C) | |||||||
| KQE | 0.2 *(AWG24) | W (White) BK (Black) R (Red) BE (Blue) Y (Yellow) GN (Green) | 10 / 50 / 100 / 400 (1 Roll) | 7/0.18 | 0.54 | 0.25 | 1 | 111 | 2500 | 2000 | 4 | 2.5 |
| 0.3 * (AWG22) | 12/0.18 | 0.7 | 0.3 | 1.3 | 64.4 | 2000 | 7 | 4 | ||||
| 0.5 * (AWG20) | 20/0.18 | 1 | 0.3 | 1.55 | 38.7 | 1500 | 9 | 6 | ||||
| 0.75 * (AWG18) | 30/0.18 | 1.1 | 0.3 | 1.7 | 25.8 | 1000 | 12 | 9 | ||||
* For the outer diameter size of cables, wire sheath (coat), etc., refer to "Finished Outer Diameter" in the table above.
Structure Outline
| Conductor | Tin Plated Annealed Copper Stranded Wire |
| Insulator | Cross-linked Polyethylene |
Current Reduction Factor
| Ambient Temperature (°C) | 30 | 40 | 50 | 60 |
| Current Reduction Factor | 1.00 | 0.90 | 0.77 | 0.63 |
If the ambient temperature is 30 °C or above, the above current reduction factor is multiplied by the allowable current.
(Example) Allowable current value when the ambient temperature is 40 °C at 0.2mm2
4 x 0.9 = 3.6 (A)
Package Type
Vinyl Bag: The wires are wound into a bundle and tied with rope or vinyl string and then packed in a vinyl bag.
Case: The wires are wound into a bundle and tied with string etc., and packed in a case (cardboard box).
| Model | Section Area | Total Length | |||
| 400 m (1 roll) | 100m | 50m | 10m | ||
| KQE | 0.2 *(AWG24) | Vinyl Bag (Case) | Vinyl Bag (Case) | Vinyl Bag (Case) | Vinyl Bag (Case) |
| 0.3 * (AWG22) | Vinyl Bag (Case) | Vinyl Bag (Case) | Vinyl Bag (Case) | Vinyl Bag (Case) | |
| 0.5 * (AWG20) | Vinyl Bag (Case) | Vinyl Bag (Case) | Vinyl Bag (Case) | Vinyl Bag (Case) | |
| 0.75 * (AWG18) | Vinyl Bag (Case) | Vinyl Bag (Case) | Vinyl Bag (Case) | Vinyl Bag (Case) | |
Basic Information
| Conductor Cross Section(mm2) | 0.3 | AWG size 1(AWG) | 22 | Sheath (outer coating) color | Yellow |
|---|---|---|---|---|---|
| Rated Voltage 1 | For Low Current Circuits | Overall Length(m) | 100 | Finished outer diameter(mm) | 1.3 |
| Shield 1 | None | Sheath (outer coating) material | Polyethylene-Based | Number Of Cores(Core) | 1 |
| Power supply/signal | Dual use |
Please check the type/dimensions/specifications of the part KQE-0.3-Y-100 in the Cable KQE 60 V Cross-linked Polyethylene Insulation series.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Fixing Single-Core Cable ⋅ RVEC Series CCC/CE 300/500V 450/750V
- Fixing Single-Core Cable ⋅ ECO Series, UL1015 600V
- Heat Resistant Vinyl Cable, UL1015/TEW Series (Including Bobbin (Reel) Winding)
- UL3266 UL Standard Lead Free Irradiated Cross-Linked Flame Retardant PE Cable
- UL1061 UL Standard Lead Free Semi-Rigid PVC Cable
- ÖLFLEX® FD 90
- ÖLFLEX® FD 90 CY
- UNITRONIC® LiYCY A
Customers Who Viewed This Item Also Viewed
-
-
FA PSE Supported, 150 °C Heat-Resistant Fluorine Resin Insulated CableMISUMI
Standard Price : MYR 98.13-
Days to Ship : 4 Day(s) or more
-
Heat Resistant Vinyl Cable, AWM1007/TR-64 Series (Including Bobbin (Reel) Winding / Twisted Pair Products)SHINAGAWA
Standard Price : MYR 16.51-
Days to Ship : 10 Day(s) or more
-
Cable UL 1007 UL SupportedMISAWADENSEN
Standard Price : MYR 59.31-
Days to Ship : 10 Day(s) or more
-
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy