(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
  • [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

MWI Series (Ultra Small) (Part Numbers)

MWI Series (Ultra Small)
  • Volume Discount

[Specifications]·A 45 mm × 55 mm space saving connector terminal block

  • c-UL
  • For Signal
  • Space-saving
  • Sensor
  • PLC

● Optimal for installation in locations where space is limited
● Equipped with general purpose MIL20 core connector input
● Captive screw terminal block for easy mounting and wire connection

Part Number

Configured Part Number is shown.

MWI-M20-TB20

Specification Table

ModelNumber of Poles
MWI-M20-TB2020

Overview of Specifications


· Check the specifications of the connector array of each device on equipment side before ordering.
Material
Terminal BlockPBT (Polybutylene terephthalate)
CasePPE (Polyphenylene ether)
SubstrateGE4F (Glass Epoxy)
Specifications
Rated insulation voltage24 V AC/DC
Rated Current1 A
Insulation Resistance1,000 MΩ or more (at 500 V DC megger)
Withstand Voltage2,000 V AC 60 Hz for 1 min (between grounds)
Terminal Block ScrewM3 × 6L (-in)
Tightening Torque0.5 to 0.8 N·m
Pitch Between Terminals7.62 mm
Terminal Block Conforming Wire1.25 mm2 / AWG 16 or less
Ambient Temperature−20°C to +55°C (When energized)
−30°C to +85°C (When off)
Ambient Humidity45% to 85%
ULE184879
Conforming Crimp Terminal
1.25-3
F1.25.-3
 
Connection Information
ModelNumber of PolesMounting Connector (Hirose) MaleRecommended harnessWeight (g)
MWI-M20-TB2020HIF3BA-20PA-2.54DSA71HIFS Series111
Part Number
MWI-M20-TB20
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipRoHS

MYR 236.86

1 Piece(s)Available 4 Day(s) or more 10

Loading...

  1. 1

Basic Information

Connector MIL Connector Number of connector cores(Pole) 20 Mounting Method With DIN rail
Supported equipment manufacturer Mitsubishi Electric / Omron Pitch Between Terminals(mm) 7.62 Supported equipment PLC
Dimension width(mm) 55 Terminal Block Screw M3 Representative Standard CUL
Dimension vertical(mm) 47 Dimension depth(mm) 50 Supported crimp terminal Y Terminal / Round Terminal
Number of terminal block electrodes(Pole) 20 Terminal block screw type Spring Up

Please check the type/dimensions/specifications of the part MWI-M20-TB20 in the MWI Series (Ultra Small) series.

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(60) 3 7890 6399
9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday)