(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
PLC Connector Terminal Block (for Mitsubishi Electric PLC, Input/Output), Weight: 150 g (Part Numbers)
- Volume Discount
This is a PLC connector terminal block compatible with Mitsubishi Electric PLC circuits, greatly reducing wiring labor-hours and allowing lower stage wiring without upper stage terminal wiring getting in the way.
- Connection in Boards
- Space-saving
- PLC
- 125 V
● Drastically reduces wiring work time by matching Mitsubishi Electric PLC circuits.
● Converts the FCN 40 core connector to a 34 pole terminal block (signal 32 terminal and power supply 2 terminal).
● Width is 21 mm smaller than conventional 40 pole sizes.
● The power supply terminal is consolidated to the left side for easy wire connection.
● Input and output units are shared.
· When using an input unit, the 0 V terminal is free and the +V terminal is COM.
· Check equipment-side specifications for PLC pin assignment before ordering.
Part Number
Configured Part Number is shown.
MWI-F40T34-MT-1
Specification Table
| Model Number | Connector Type | Recommended harness |
| MWI-F40T34-MT-1 | FCN 40 Core | NFCN Series |
Overview of Specifications
| Compatible Mitsubishi Electric PLC |
| QX41, QX42, QX71, QX72, QY71, QY41P, QY42P, QH42P, QX82-S1, QX82, QX41-S1, QX42-S1, A1SX41/42/71, A1SY41/42/71, |
| A1SH42, AX42, AY42, A1SX41-S1, A1SX41-S2, A1SX42-S1, A1SX42-S2, A1SX82-S1, A1SY41P, A1SY42P, A1SH42-S1 |
| Rated Voltage | 125 V |
| Rated Current | 0.5 A (Power Supply: 2 A) |
| Withstand Voltage | 500 V AC for 1 min. |
| Insulation Resistance | 100 MΩ or more (500 V DC megger) |
| Terminal screw | M3x9.8 (Captive Screw) |
| Tightening Torque | 0.6 to 0.9 N·m |
| Ambient Temperature | −20 to +80°C |
| Relative humidity | 45 to 85% |
| Mass | 150 g |
| Terminal Block | UL94V-1 (Polycarbonate) |
| Terminal screw | Iron, nickel plating |
| Terminal board | Brass |
| Case | UL94V-0 (Polycarbonate) |
Basic Information
| Connector | FCN connector | Number of connector cores(Pole) | 40 | Mounting Method | DIN rail/Direct attachment |
|---|---|---|---|---|---|
| Supported equipment manufacturer | Mitsubishi Electric | Pitch Between Terminals(mm) | 7 | Supported equipment | PLC |
| Dimension width(mm) | 129 | Terminal Block Screw | M3 | Dimension vertical(mm) | 42 |
| Dimension depth(mm) | 42.4 | Supported crimp terminal | Y Terminal | Number of terminal block electrodes(Pole) | 34 |
| Connector Polarity (Mounted Connector) | Female | Terminal block screw type | Self-Up |
Please check the type/dimensions/specifications of the part MWI-F40T34-MT-1 in the PLC Connector Terminal Block (for Mitsubishi Electric PLC, Input/Output), Weight: 150 g series.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- MWS Series (Spring-Loaded), Compatible Crimp Terminals Y terminal/Round terminal
- MWS Series (Spring-Loaded), for Both DIN Rail and Screw Mounting
- MWS Series (Spring-Loaded), Terminal Block Screw Type: Spring-Loaded
- MWI series (pitch between terminals 7mm), compatible equipment: servo motor
- Connector Terminal Block, PCI Series, Crimp Terminal Type
- PX7DW Series Dsub Connector Terminal Block (terminal pitch: 7.62mm)
- Wire Distribution I/O Direct Connection Connector Terminal Block for FANUC Control
- FANUC Operation Board I/O Connector Terminal Block for FANUC Control
Customers Who Viewed This Item Also Viewed
-
PLC Connector Terminal Block (for Mitsubishi Electric, Input/Output) FCN/MILMISUMI
Standard Price : MYR 145.37-
Days to Ship : 4 Day(s) or more
-
MWS Series (Spring-Loaded), Compatible Crimp Terminals Y terminal/Round terminalMISUMI
Standard Price : MYR 95.44-
Days to Ship : 1 Day(s) or more
-
-
MWS Series (Spring-Loaded), Mounting Method: DIN Rail / Direct MountMISUMI
Standard Price : MYR 183.68
Days to Ship : 4 Day(s) or more
-
-
-
MELSEC-A/Q Series, MELSEC iQ-R Series CC-Link Wiring ConnectorMITSUBISHI
Standard Price : MYR 78.33-
Days to Ship : 4 Day(s) or more
-
MELSEC CC-Link Small-Size Type Remote I/O Unit (Input Unit)MITSUBISHI
Standard Price : MYR 698.33-
Days to Ship : 4 Day(s) or more
-
MWI Series (Terminal Pitch 7 mm), Compatible Crimp Terminals: SpadeMISUMI
Standard Price : MYR 142.43-
Days to Ship : 1 Day(s) or more
-
Sequencer MELSEC-Q option parts (connector/terminal block conversion unit/cable)MITSUBISHI
Standard Price : MYR 258.98-
Days to Ship : 4 Day(s) or more
-
MWI Series (Pitch between terminals 8.5 mm)MISUMI
Standard Price : MYR 664.54-
Days to Ship : 4 Day(s) or more
-
MWS Series (Spring-Loaded), for Both DIN Rail and Screw MountingMISUMI
Standard Price : MYR 133.81-
Days to Ship : 2 Day(s) or more
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy