[Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Small AC Speed Controller Motors 6-200W (Part Numbers)

Volume Discount

MiSUMi Economy

Small AC Speed Controller Motors 6-200W launched as MISUMI Economy series
If the shaft end shape is selected A (circular shaft), the gear head cannot be added. To use the gear head, select GN, GU for the shaft end shape.
【Outerline drawing】
Detail outerline drawings
Detailed technical data
【Usage】
- Small motor with integrated controller, capable of speed adjustment from 90 to 1400 r/min at 50Hz and 90 to 1700 r/min at 60Hz.
【Product Features】
- Covers a wide speed range of 90–1700 r/min, enabling quick line synchronization and yield improvement.
- No immediate stop function; avoid prolonged low-speed operation to prevent overheating.

Part Number

Configured Part Number is shown.

Drawing/Specifications
Part Numbers

Caution

The speed control motor requires the purchase of a controller to adjust the speed. >>Link

Product Overview

Motor Type	Type	Applications	Features	Notes	Output Range	Motor		Controller
Motor Type	Type	Applications	Features	Notes	Output Range	Parallel	Right Angle	Controller
Induction Motor	EA-IMA EA-IMB	【Constant-speed continuous operation】 (24-hour use such as fans, pumps, mixers, conveyors with minimal load fluctuation)	Simple and robust structure. Three-phase types provide high efficiency and good starting characteristics single-phase types offer easy wiring.	Not suitable for large acceleration/deceleration or frequent forward/reverse cycles.	6～200W	LINK	LINK	-
Reversible Motor	EA-RM	【Frequent forward/reverse operation】 positioning, reciprocating motion, pushing applications	Excellent reversing response, minimizing overrun	Generates a lot of heat, so it has a short-time rating (ex. 30 minutes)	6～120W	LINK	LINK	-
Brake Motor	EA-BM	【Holding / maintaining stop】 lifting, vertical transport, safety stop	Stops and holds immediately when power is turned off, and maintains position even during power failure	Limitations apply regarding stop frequency and temperature environment	6～200W	LINK	LINK	-
Speed Control Motor	EA-AM	【Speed control】 flow control, tension control, synchronous feeding, frequent setup changes	Controller-integrated design for easy wiring with a wide adjustable speed range	Risk of overheating during ultra-low-speed continuous operation	6～200W	LINK	LINK	LINK
Reversible Speed Control Motor	EA-ARM	【Speed control + reverse】 positioning, reciprocating motion, pushing applications requiring adjustable speed	Combines speed control and reversing capability in a single unit.	Duty cycle and thermal limits must be considered in continuous use.	25～120W	*	*	LINK
Brake Speed Control Motor	EA-ABM	【Speed control +Brake】 vertical transport, lifting requiring speed adjustment and position holding	Allows speed adjustment while maintaining safe and stable stopping performance.	Not suitable for continuous operation under heavy braking conditions.	25～200W	*	*	LINK
Torque Motor	EA-TM	【Tension Control】 Winding, feeding, and pressing applications that require maintaining constant tension or pressure.	Maintains high torque even at low or near-stopped speeds	Generates significant heat → ensure operation within continuous torque rating and provide cooling	3~20W	LINK	-	-

*: Scheduled to be released after web production in March 26th

Outline Drawing

Link Pages which have outerline dimension, wiring,technical data are available. Please refer to the page top " Product Description ".

◇Motor & Gearhead Set

◇ Fan-Attached Type

Specification Table

～ Please select the model and parameters according to the options below before placing your order.

Part Number
Type・Flange Size

－

Shaft End Shape

－

Input Voltage /
Number of Poles

－

Additional Option
Fan / Terminal Box Type

－

Additional Option
Gearhead Selection

－

Additional Option
Gear Ratio

EA-AM

5040

EA-AM

5120

－

■ Motor Body

❶	❷			❸	❹	➎
Type	No	Flange Size	Output Power [W]	Shaft End Shape	Input V Code	Fan


Speed Controller Motor EA-AM	2006	□60	6	GN：GN Gear A：Round	〈4poles〉 A：Single 110V、50/60Hz、4poles E：Single 110/120V、60Hz、4poles C：Single 220/230V、50Hz、4poles H：Single 220/230V、60Hz、4poles	none
	3015	□70	15			none
	4025	□80	25			none
	5040	□90	40			none
	5060		60	GN、GU、A		F：With fan
	5090		90	GU：GU Gear A：Round		F：With fan
	5120		120			F：With fan
	6120	□104	120			F：With fan
	6140		140			F：With fan
	6200		200			F：With fan

The various safety standards are certified based on the model name indicated on the motor’s nameplate.

For the “-A” model with a voltage of 110V, please refer to the capacitor capacity shown on the actual unit’s nameplate.

■ Gearhead (Additional machining can be specified)
※ Additional machining can be designated only when selecting shaft types GN or GU.

❻			➐
Alterations Code	No	Flange Size	Gear Ratio
Alterations Code	No	Flange Size	3	3.6	5	6	7.5	9	10	12.5	15	18	20	25	30	36	40	50	60	75	90	100	120	150	180	200
GH	2	□60	3	3.6	5	6	7.5	9	10	12.5	15	18	20	25	30	36	40	50	60	75	90	100	120	150	180	200
	3	□70	3	3.6	5	6	7.5	9	10	12.5	15	18	20	25	30	36	40	50	60	75	90	100	120	150	180	200
	4	□80	3	3.6	5	6	7.5	9	10	12.5	15	18	20	25	30	36	40	50	60	75	90	100	120	150	180	200
	5	□90	3	3.6	5	6	7.5	9	10	12.5	15	18	20	25	30	36	40	50	60	75	90	100	120	150	180	200
	6	□104	3	3.6	5	6	7.5	9	10	12.5	15	18	20	25	30	36	40	50	60	75	90	100	120	150	180	200

※Gearhead standalone model number = EA- & {Additional Processing Code} & {Flange No.} & {Gear Ratio}

Specification Overview

									Allowance Torque
Type No	Flange Size	Output [W]	Shaft End Shape	Input V Code	Voltage	Frequency	Speed Control Range		At 1200	At 90	Starting Torque	Current	Capacitor
					Voltage	Frequency	Speed Control Range		r/min	r/min	Starting Torque	Current	Capacitor
					[V]	[Hz]	Min.	Max.	[mN・m]	[mN・m]	[mN・m]	[A]	[μF]
EA-AM2006	□60	6	〈Pinion〉 -GN 〈Round〉 -A	-A	1ph 100	50	90	1,350	50	30	35	0.240	3.5
				-A	1ph 100	60	90	1,650	50	29	35	0.250	3.5
				-E	1ph 110	60	90	1,650	50	29	30	0.160	2.0
				-E	1ph 120	60	90	1,650	50	29	30	0.180	2.0
				-C	1ph 220	50	90	1,350	55	29	35	0.130	0.8
				-C	1ph 230	50	90	1,350	55	29	35	0.110	0.8
				-H	1ph 220	60	90	1,650	55	29	35	0.140	0.8
				-H	1ph 230	60	90	1,650	55	29	35	0.120	0.8
EA-AM3015	□70	15	〈Pinion〉 -GN 〈Round〉 -A	-A	1ph 100	50	90	1,350	120	35	55	0.35	6.0
				-A	1ph 100	60	90	1,650	120	35	55	0.33	6.0
				-E	1ph 110	60	90	1,650	125	35	55	0.30	5.0
				-E	1ph 120	60	90	1,650	125	35	55	0.32	5.0
				-C	1ph 220	50	90	1,350	120	35	54	0.18	1.2
				-C	1ph 230	50	90	1,350	120	35	54	0.20	1.2
				-H	1ph 220	60	90	1,650	85	35	52	0.16	1.2
				-H	1ph 230	60	90	1,650	105	35	55	0.15	1.2
EA-AM4025	□80	25	〈Pinion〉 -GN 〈Round〉 -A	-A	1ph 100	50	90	1,350	190	47	88	0.50	8.0
				-A	1ph 100	60	90	1,650	190	47	88	0.55	8.0
				-E	1ph 110	60	90	1,650	190	50	105	0.45	7.0
				-E	1ph 120	60	90	1,650	190	50	105	0.50	7.0
				-C	1ph 220	50	90	1,350	190	47	88	0.25	1.8
				-C	1ph 230	50	90	1,350	190	47	88	0.23	1.8
				-H	1ph 220	60	90	1,650	190	45	88	0.23	1.8
				-H	1ph 230	60	90	1,650	190	45	88	0.23	1.8
EA-AM5040	□90	40	〈Pinion〉 -GN 〈Round〉 -A	-A	1ph 100	50	90	1,350	260	70	180	0.65	12.0
				-A	1ph 100	60	90	1,650	260	70	180	0.70	12.0
				-E	1ph 110	60	90	1,650	260	65	180	0.55	8.0
				-E	1ph 120	60	90	1,650	260	65	180	0.60	8.0
				-C	1ph 220	50	90	1,350	300	75	160	0.35	2.5
				-C	1ph 230	50	90	1,350	300	75	160	0.40	2.5
				-H	1ph 220	60	90	1,650	230	70	145	0.35	2.5
				-H	1ph 230	60	90	1,650	230	70	145	0.40	2.5
EA-AM5060	□90	60	〈Pinion〉 -GU	-A	1ph 100	50	90	1,350	460	140	265	1.00	20.0
				-A	1ph 100	60	90	1,650	490	160	265	1.10	20.0
				-E	1ph 110	60	90	1,650	490	160	265	0.80	12.0
				-E	1ph 120	60	90	1,650	490	160	265	0.85	12.0
				-C	1ph 220	50	90	1,350	490	140	265	0.50	4.0
				-C	1ph 230	50	90	1,350	490	140	265	0.55	4.0
				-H	1ph 220	60	90	1,650	490	160	265	0.50	4.0
				-H	1ph 230	60	90	1,650	490	160	265	0.55	4.0
EA-AM5090	□90	90	〈Pinion〉 -GU 〈Round〉 -A	-A	1ph 100	50	90	1,350	710	230	405	1.55	25.0
				-A	1ph 100	60	90	1,650	710	260	405	1.85	25.0
				-E	1ph 110	60	90	1,650	710	260	410	1.40	20.0
				-E	1ph 120	60	90	1,650	710	260	410	1.45	20.0
				-C	1ph 220	50	90	1,350	710	230	410	0.72	5.0
				-C	1ph 230	50	90	1,350	710	230	410	0.70	5.0
				-H	1ph 220	60	90	1,650	710	260	410	0.71	5.0
				-H	1ph 230	60	90	1,650	710	260	410	0.75	5.0
EA-AM5120	□90	120	〈Pinion〉 -GU 〈Round〉 -A	-A	1ph 100	50	90	1,350	750	330	530	2.10	30.0
				-A	1ph 100	60	90	1,650	750	330	530	2.50	30.0
				-E	1ph 110	60	90	1,650	750	360	530	1.65	25.0
				-E	1ph 120	60	90	1,650	750	360	530	1.80	25.0
				-C	1ph 220	50	90	1,350	750	330	530	1.00	7.0
				-C	1ph 230	50	90	1,350	750	330	530	0.95	7.0
				-H	1ph 220	60	90	1,650	750	360	530	1.00	7.0
				-H	1ph 230	60	90	1,650	750	360	530	0.95	7.0
EA-AM6120	□104	120	〈Pinion〉 -GU 〈Round〉 -A	-A	1ph 100	50	90	1,350	750	360	530	2.10	30.0
				-A	1ph 100	60	90	1,650	750	360	530	2.50	30.0
				-E	1ph 110	60	90	1,650	750	360	520	1.70	20.0
				-E	1ph 120	60	90	1,650	750	360	520	1.80	20.0
				-C	1ph 220	50	90	1,350	750	330	530	0.95	8.0
				-C	1ph 230	50	90	1,350	750	330	530	0.95	8.0
				-H	1ph 220	60	90	1,650	750	360	530	0.95	8.0
				-H	1ph 230	60	90	1,650	750	360	530	1.00	8.0
EA-AM6140	□104	140	〈Pinion〉 -GU 〈Round〉 -A	-A	1ph 100	50	90	1,350	830	420	620	2.70	35.0
				-A	1ph 100	60	90	1,650	830	420	620	3.00	35.0
				-E	1ph 110	60	90	1,650	830	450	620	1.80	25.0
				-E	1ph 120	60	90	1,650	830	450	620	1.95	25.0
				-C	1ph 220	50	90	1,350	830	420	620	1.05	10.0
				-C	1ph 230	50	90	1,350	830	420	620	1.15	10.0
				-H	1ph 220	60	90	1,650	830	450	620	1.05	10.0
				-H	1ph 230	60	90	1,650	830	450	620	1.15	10.0
EA-AM6200	□104	200	〈Pinion〉 -GU 〈Round〉 -A	-C	1ph 220	50	90	1,350	920	500	1,000	1.40	10.0
				-C	1ph 230	50	90	1,350	920	500	1,000	1.40	10.0
				-H	1ph 220	60	90	1,650	920	500	1,000	1.4	10.0
				-H	1ph 230	60	90	1,650	920	500	1,000	1.4	10

○ Allowable Torque When a Gearhead Is Mounted

Please purchase gearheads and mid-gearheads either by specifying additional machining for the motor or from the standalone product page (AC Motor Gearhead EA Series).
When the additional machining code GH is specified, the gear ratio is entered in the box (□) within the model number.
Combinations shown in the yellow cells ( )indicate that the output rotation direction is opposite to that of the motor. All other combinations have the same rotation direction.
The rotational speed is a reference value calculated by dividing the motor’s synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio.
The actual rotational speed decreases by approximately 2–20% from the listed value depending on the load.
If a greater gear ratio than those listed in the table is required, please add a mid-gearhead with a gear ratio of 10 between the motor and the gearhead.
In this case, the allowable torque is 20 N·m.

■ Allowable Torque Table

Type	Allowance Torque Unit
	Gear Ratio		3	3.6	5	6	7.5	9	10	12.5	15	18	20	25	30	36	40	50	60	75	90	100	120	150	180	200
	50Hz	Speed r/min	500	417	300	250	200	166	150	120	100	83	75	60	50	41	37	30	25	20	16	15	12.5	10	8.3	7.5
	60Hz	Speed r/min	600	500	360	300	240	200	180	144	120	100	90	72	60	50	45	36	30	24	20	18	15	12	10	9
EA-AM2006 -GN	50Hz	N・m	0.12	0.14	0.19	0.23	0.29	0.35	0.39	0.49	0.58	0.70	0.75	0.88	1.10	1.30	1.39	1.60	1.90	2.40	2.90	3.00	3.00	3.00	3.00	3.00
	50Hz	kgf・cm	1.22	1.43	1.94	2.35	2.96	3.57	3.98	5.00	5.92	7.14	7.65	8.98	11.2	13.3	14.2	16.3	19.4	24.5	29.6	30.0	30.0	30.0	30.0	30.0
	60Hz	N・m	0.10	0.12	0.16	0.19	0.24	0.29	0.32	0.41	0.49	0.58	0.62	0.73	0.88	1.10	1.15	1.30	1.60	2.00	2.40	2.60	3.00	3.00	3.00	3.00
	60Hz	kgf・cm	1.02	1.22	1.63	1.94	2.45	2.96	3.26	4.18	5.00	5.92	6.32	7.45	8.98	11.2	11.7	13.3	16.3	20.4	24.5	2.65	30.0	30.0	30.0	30.0
EA-AM3015 -GN	50Hz	N・m	0.30	0.36	0.51	0.61	0.76	0.91	0.97	1.30	1.50	1.80	1.94	2.30	2.70	3.30	3.48	4.10	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00
	50Hz	kgf・cm	3.06	3.67	5.20	6.22	7.75	9.28	9.90	13.2	15.3	18.3	19.8	23.4	27.5	33.7	35.5	41.8	50.0	50.0	50.0	50.0	50.0	50.0	50.0	50.0
	60Hz	N・m	0.26	0.31	0.43	0.51	0.64	0.77	0.80	1.10	1.30	1.50	1.64	1.90	2.30	2.80	2.88	3.50	4.20	5.00	5.00	5.00	5.00	5.00	5.00	5.00
	60Hz	kgf・cm	2.65	3.16	4.38	5.20	6.53	7.85	8.16	11.2	13.2	15.3	16.7	19.3	23.4	28.5	29.4	35.7	42.8	50.0	50.0	50.0	50.0	50.0	50.0	50.0
EA-AM4025 -GN	50Hz	N・m	0.49	0.58	0.81	0.97	1.20	1.50	1.55	2.00	2.40	2.90	3.17	3.70	4.40	5.30	5.57	6.60	7.90	8.00	8.00	8.00	8.00	8.00	8.00	8.00
	50Hz	kgf・cm	5.00	5.91	8.26	9.89	12.2	15.3	15.8	20.4	24.4	29.6	32.3	37.7	44.9	54.1	56.8	67.3	80.0	80.0	80.0	80.0	80.0	80.0	80.0	80.0
	60Hz	N・m	0.40	0.48	0.67	0.80	1.00	1.20	1.25	1.70	2.00	2.40	2.64	3.00	3.60	4.30	4.49	5.40	6.50	8.00	8.00	8.00	8.00	8.00	8.00	8.00
	60Hz	kgf・cm	4.08	4.89	6.83	8.16	10.2	12.2	12.8	17.3	20.4	24.4	26.9	30.6	36.7	43.8	45.8	55.1	66.3	80.0	80.0	80.0	80.0	80.0	80.0	80.0
EA-AM5040 -GN	50Hz	N・m	0.77	0.92	1.30	1.50	1.90	2.30	2.38	3.20	3.80	4.60	4.88	5.70	6.90	8.30	8.57	10.0	10.0	10.0	10.0	10.0	10.0	10.0	10.0	10.0
	50Hz	kgf・cm	7.85	9.38	13.2	15.3	19.4	23.4	24.3	32.6	38.7	46.9	49.8	58.1	70.4	84.7	87.4	100	100	100	100	100	100	100	100	100
	60Hz	N・m	0.63	0.76	1.10	1.30	1.60	1.90	2.00	2.60	3.20	3.80	4.07	4.70	5.70	6.80	7.19	8.60	10.0	10.0	10.0	10.0	10.0	10.0	10.0	10.0
	60Hz	kgf・cm	6.42	7.75	11.2	13.2	16.3	19.3	20.4	26.5	32.6	38.7	41.5	47.9	58.1	69.3	73.4	87.7	100	100	100	100	100	100	100	100
EA-AM5060 -GN	50Hz	N・m	1.10	1.40	1.90	2.30	2.90	3.40	3.57	4.80	5.70	6.80	7.03	8.60	10.0	10.0	10.0	10.0	10.0	10.0	10.0	10.0	10.0	10.0	10.0	10.0
	50Hz	kgf・cm	11.2	14.2	19.3	23.4	29.6	34.7	36.4	48.9	58.1	69.3	71.7	87.7	100	100	100	100	100	100	100	100	100	100	100	100
	60Hz	N・m	0.92	1.10	1.50	1.80	2.30	2.80	2.99	3.80	4.60	5.50	5.70	6.90	8.30	10.0	10.0	10.0	10.0	10.0	10.0	10.0	10.0	10.0	10.0	10.0
	60Hz	kgf・cm	9.38	11.2	15.3	18.3	23.4	28.5	30.5	38.7	46.9	56.1	58.2	70.1	84.7	100	100	100	100	100	100	100	100	100	100	100
EA-AM5060 -GU	50Hz	N・m	1.10	1.40	1.90	2.30	2.90	3.40	3.61	4.80	5.70	6.80	7.12	8.60	10.0	10.3	11.6	12.4	15.5	18.6	20.0	20.0	20.0	20.0	20.0	20.0
	50Hz	kgf・cm	11.2	14.2	19.3	23.4	29.6	34.7	36.8	48.9	58.1	69.3	72.6	87.7	100	105	118	126	158	189	200	200	200	200	200	200
	60Hz	N・m	0.92	1.10	1.50	1.80	2.30	2.80	3.01	3.80	4.60	5.50	5.73	6.90	8.30	83.0	9.70	10.0	12.5	15.0	18.8	20.0	20.0	20.0	20.0	20.0
	60Hz	kgf・cm	9.38	11.2	15.3	18.3	23.4	28.5	30.7	38.7	46.9	56.1	58.4	70.1	84.7	84.6	98.9	102	127	153	192	200	200	200	200	200
EA-AM5090 -GU	50Hz	N・m	1.70	2.00	2.80	3.40	4.30	5.10	5.31	6.40	7.70	9.20	9.55	11.6	13.6	16.6	18.1	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0
	50Hz	kgf・cm	17.3	20.4	28.6	34.7	43.9	52.0	54.2	65.3	78.6	93.3	97.4	118	139	169	184	200	200	200	200	200	200	200	200	200
	60Hz	N・m	1.40	1.70	2.50	2.80	3.50	4.20	4.43	5.20	6.20	7.50	7.81	9.40	11.3	13.5	14.5	18.8	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0
	60Hz	kgf・cm	14.3	17.3	25.5	28.6	35.7	42.9	45.2	53.1	63.3	76.5	79.6	95.9	115	138	148	19.2	200	200	200	200	200	200	200	200
EA-AM5120 -GU	50Hz	N・m	2.30	2.70	3.80	4.50	5.60	6.80	7.01	8.50	10.2	12.2	12.5	15.3	18.4	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0
	50Hz	kgf・cm	23.4	27.5	38.7	45.9	57.1	69.3	71.5	86.7	104	124	128	156	187	200	200	200	200	200	200	200	200	200	200	200
	60Hz	N・m	1.80	2.20	3.00	3.60	4.60	5.50	5.73	6.80	8.20	9.80	10.1	12.4	14.9	17.8	19.5	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0
	60Hz	kgf・cm	18.3	22.4	30.6	36.7	46.9	56.1	58.5	69.5	83.6	100	103	126	152	181	199	200	200	200	200	200	200	200	200	200
EA-AM6120 -GU	50Hz	N・m	2.30	2.70	3.80	4.50	5.60	6.80	6.68	8.50	10.2	12.2	12.0	15.3	18.4	22.1	24.0	30.7	36.8	40.0	40.0	40.0	40.0	40.0	40.0	40.0
	50Hz	kgf・cm	23.4	27.5	38.7	45.9	57.1	69.3	68.2	86.7	104	124	123	156	187	225	245	313	375	400	400	400	400	400	400	400
	60Hz	N・m	1.80	2.20	3.00	3.60	4.60	5.50	5.40	6.80	8.20	9.80	9.70	12.4	14.9	17.8	19.4	24.8	29.7	37.1	40.0	40.0	40.0	40.0	40.0	40.0
	60Hz	kgf・cm	18.3	22.4	30.6	36.7	46.9	56.1	55.0	69.3	83.6	100	99.0	126	152	181	198	253	303	378	400	400	400	400	400	400
EA-AM6140 -GU	50Hz	N・m	2.60	3.10	4.40	5.20	6.60	7.90	7.80	9.90	11.8	14.2	14.0	17.8	21.4	25.7	28.0	35.6	40.0	40.0	40.0	40.0	40.0	40.0	40.0	40.0
	50Hz	kgf・cm	26.5	31.6	44.8	53.0	80.6	80.6	79.6	101	120	144	143	181	218	262	286	263	400	400	400	400	400	400	400	400
	60Hz	N・m	2.10	2.50	3.50	4.20	5.30	6.30	6.30	7.90	9.50	11.4	11.3	14.4	17.2	20.7	22.6	28.7	34.5	40.0	40.0	40.0	40.0	40.0	40.0	40.0
	60Hz	kgf・cm	21.4	25.5	35.7	42.8	54.0	64.2	64.2	80.6	96.9	116	115	147	175	211	231	292	352	400	400	400	400	400	400	400
EA-AM6200 -GU	50Hz	N・m	3.71	4.46	6.19	7.43	9.28	11.1	11.9	13.9	16.7	20.1	20.8	25.2	30.3	36.3	40.0	40.0	40.0	40.0	40.0	40.0	40.0	40.0	40.0	40.0
	50Hz	kgf・cm	37.9	45.5	63.1	75.8	94.7	114	121	142	171	205	212	257	309	370	400	400	400	400	400	400	400	400	400	400
	60Hz	N・m	2.99	3.59	4.99	5.99	7.49	8.98	9.70	11.2	13.5	16.2	17.2	20.3	24.4	29.3	40.0	40.0	40.0	40.0	40.0	40.0	40.0	40.0	40.0	40.0
	60Hz	kgf・cm	30.6	36.7	50.9	61.1	76.4	91.7	98.9	115	138	165	175	207	249	299	400	400	400	400	400	400	400	400	400	400

Wiring Diagram

Technical Data (to be attached separately)

● Allowable overhung load and allowable thrust load for the motor
◇ Motor & Gearhead Set

Motor		Permissible Overhung Load
Frame Size	Shaft Diameter	[N]
Frame Size	Shaft Diameter	Distance From Shaft End
[mm]	[mm]	10mm	20mm
60	6	50	110
70	6	40	60
80	8	90	140
80	10	110	120
90	10	140	200
90	12	240	270
100	15	320	350

- Thrust load should be avoided as much as possible.
- If thrust load is unavoidable, it must be kept to less than half of the motor’s own weight.

◇ Gearhead Set

Model	Gear Ratio	Max. Permissible Torque	Permissible Overhung Load		Permissible Thrust Load
			[N]
			Distance From Shaft End
		[mN・m]	10mm	20mm	[N]
EA-GN2-□K	3~18	3.0	50	80	30
EA-GN2-□K	25~200	3.0	120	180	30
EA-GN3-□K	3~18	5.0	80	120	40
EA-GN3-□K	25~200	5.0	150	250	40
EA-GN4-□K	3~18	8.0	100	150	50
EA-GN4-□K	25~200	8.0	200	300	50
EA-GN5-□K	3~18	10	250	350	100
EA-GN5-□K	25~200	10	300	450	100
EA-GU5-□KB EA-GU5-□K	3~9	20	400	500	150
	12.5~18		450	600
	25~200		500	700
EA-GU6-□K	3~200	40	1100	1500	300

● Allowable Inertia Load (J) of the Gearhead
- When a load with large inertia (J) is connected to the gearhead, the gearhead receives a momentarily high torque during motor startup,
frequent intermittent operation, or sudden stopping caused by an electromagnetic brake or brake pack. Such excessive shock loads may damage the gearhead or the motor.
- The table below shows the allowable inertia values based on the motor shaft. The motor and gearhead must be used within these limits.
- For three-phase motors, the allowable inertia value is based on reverse rotation after stopping.
- The allowable inertia load (J) at the gearhead output shaft is calculated using the following formula:

Gear ratio	Formula
1/3～1/5	JG = JM × i
1/60 or high	JG = JM × 2500

Symbol Definitions
● JG : Allowable inertia load at the gearhead output shaft (×10⁻⁴ kg·m²)
● JM : Allowable inertia load at the motor shaft (×10⁻⁴ kg·m²)
● i : Gear ratio (e.g., i = 3 → corresponds to a reduction ratio of 1/3)

- When operating within the allowable inertia range while performing instantaneous stopping using an electromagnetic brake, brake pack, or speed-control motor, the gearhead life is at least 2,000,000 cycles.

◇ Allowable Inertia Load at Gearhead Output Shaft

No. of Phase	Motor Frame Size	Output Power	Permissible Load Inertia At The Motor Shaft


			J [×10-4 kg・m2 ]	GD2 [kg・m2]
Single Phase	60	3W※、6W	0.062	0.25
	70	6W※、15W	0.14	0.52
	80	10W※、25W	0.31	1.2
	90	20W※、40W	0.75	3
		60W	1.1	4.6
		90W	1.1	4.6
		120W	1.1	4.6
	100	120W	2	8
		140W	2	8
		180W	2	8
Three phase	60	6W	0.062	0.25
	70	15W	0.14	0.52
	80	25W	0.31	1.2
	90	40W	0.75	3
		60W	1.1	4.6
		90W	1.1	4.6
		120W	1.1	4.6
	100	120W	2	8
		140W	2	8
		180W	2	8

※ For torque motors, the value is based on output (power).

● Gearhead Allowable Torque Calculation
- For some products, allowable torque values are not listed. In such cases, the allowable torque can be calculated using the formula below.

Allowable Torque: TG = TM × i × η

TG : Allowable torque of the gearhead
TM : Motor torque
i : Gear ratio of the gearhead
η : Gearhead efficiency

◇ Gearhead Efficiency

No	Flange Size	Gear Type	Gear Ratio
No	Flange Size	Gear Type	3	3.6	5	6	7.5	9	10	12.5	15	18	20	25	30	36	40	50	60	75	90	100	120	150	180	200
2	□60	GN	81%											73%				66%
3	□70
4	□80
5	□90
5	□90	GU	81%							73%				66%							59%
6	□104	GU	81%							73%				66%

Alterations

Alterations	Gearhead Set Purchase	Mid-Gear Set Purchase
Code	GH	GH10X
Spec.	You can purchase a gearhead set that matches the motor size and gear type. Please check the gearhead specification table to confirm the available gear ratios based on the motor flange number. [ ! ] Available gear ratios: for flange □42 → 1/3 to 1/60, others → 1/3 to 1/200. [Designation method] Gear ratio 1/30 → GH30	You can purchase a mid-gear set that matches the motor size. When combined with a gearhead, a greater gear ratio can be achieved. [ ! ] Only a gear ratio of 1/10 is available. [Designation method] GN10X






1 Code (Price per Code)	Check on Web	Check on Web

※Gearhead standalone model number = EA- & {Additional Processing Code} & {Flange No.} & {Gear Ratio}

Product Features

Feature 1: This product is a unit integrating both the controller and the motor.
Once connected, it can be used immediately, and the speed can be easily adjusted using a potentiometer (variable resistor).
The controller incorporates a speed-control circuit, capacitor, and speed-setting mechanism.
Please note that this unit does not include an instantaneous stop function.

Feature 2: The motor speed can be adjusted through the controller within the following ranges
- 50Hz operation: 90–1400 r/min
- 60Hz operation: 90–1700 r/min

Feature 3: Do not operate the motor at low speed for extended periods, as this may cause overheating.

: 30; 60; 90

Part Number
EA-AM2006-A-A
EA-AM2006-A-C
EA-AM2006-A-E
EA-AM2006-A-H
EA-AM2006-GN-A
EA-AM2006-GN-C
EA-AM2006-GN-E
EA-AM2006-GN-H
EA-AM3015-A-A
EA-AM3015-A-C
EA-AM3015-A-E
EA-AM3015-A-H
EA-AM3015-GN-A
EA-AM3015-GN-C
EA-AM3015-GN-E
EA-AM3015-GN-H
EA-AM4025-A-A
EA-AM4025-A-C
EA-AM4025-A-E
EA-AM4025-A-H
EA-AM4025-GN-A
EA-AM4025-GN-C
EA-AM4025-GN-E
EA-AM4025-GN-H
EA-AM5040-A-A
EA-AM5040-A-C
EA-AM5040-A-E
EA-AM5040-A-H
EA-AM5040-GN-A
EA-AM5040-GN-C
EA-AM5040-GN-E
EA-AM5040-GN-H
EA-AM5060-A-A-F
EA-AM5060-A-C-F
EA-AM5060-A-E-F
EA-AM5060-A-H-F
EA-AM5060-GN-A-F
EA-AM5060-GN-C-F
EA-AM5060-GN-E-F
EA-AM5060-GN-H-F
EA-AM5060-GU-A-F
EA-AM5060-GU-C-F
EA-AM5060-GU-E-F
EA-AM5060-GU-H-F
EA-AM5090-A-A-F
EA-AM5090-A-C-F
EA-AM5090-A-E-F
EA-AM5090-A-H-F
EA-AM5090-GU-A-F
EA-AM5090-GU-C-F
EA-AM5090-GU-E-F
EA-AM5090-GU-H-F
EA-AM5120-A-A-F
EA-AM5120-A-C-F
EA-AM5120-A-E-F
EA-AM5120-A-H-F
EA-AM5120-GU-A-F
EA-AM5120-GU-C-F
EA-AM5120-GU-E-F
EA-AM5120-GU-H-F
EA-AM6120-A-A-F
EA-AM6120-A-C-F
EA-AM6120-A-E-F
EA-AM6120-A-H-F
EA-AM6120-GU-A-F
EA-AM6120-GU-C-F
EA-AM6120-GU-E-F
EA-AM6120-GU-H-F
EA-AM6140-A-A-F
EA-AM6140-A-C-F
EA-AM6140-A-E-F
EA-AM6140-A-H-F
EA-AM6140-GU-A-F
EA-AM6140-GU-C-F
EA-AM6140-GU-E-F
EA-AM6140-GU-H-F
EA-AM6200-A-C-F
EA-AM6200-A-H-F
EA-AM6200-GU-C-F
EA-AM6200-GU-H-F

Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	RoHS	Square Flange Dim. A (mm)	Rated Output (W)	Voltage (V)	Shaft End Shape	Fan	Frequency (Hz)
MYR 183.27	1 Piece(s)	Available	13 Day(s)	10	60	6	100	Round Shaft	None	50/60
MYR 183.27	1 Piece(s)	Available	13 Day(s)	10	60	6	220/230	Round Shaft	None	50
MYR 183.27	1 Piece(s)	Available	13 Day(s)	10	60	6	110/120	Round Shaft	None	60
MYR 183.27	1 Piece(s)	Available	13 Day(s)	10	60	6	220/230	Round Shaft	None	60
MYR 183.27	1 Piece(s)	Available	13 Day(s)	10	60	6	100	GN Type Spline Shaft	None	50/60
MYR 183.27	1 Piece(s)	Available	13 Day(s)	10	60	6	220/230	GN Type Spline Shaft	None	50
MYR 183.27	1 Piece(s)	Available	13 Day(s)	10	60	6	110/120	GN Type Spline Shaft	None	60
MYR 183.27	1 Piece(s)	Available	13 Day(s)	10	60	6	220/230	GN Type Spline Shaft	None	60
MYR 217.58	1 Piece(s)	Available	13 Day(s)	10	70	15	100	Round Shaft	None	50/60
MYR 217.58	1 Piece(s)	Available	13 Day(s)	10	70	15	220/230	Round Shaft	None	50
MYR 217.58	1 Piece(s)	Available	13 Day(s)	10	70	15	110/120	Round Shaft	None	60
MYR 217.58	1 Piece(s)	Available	13 Day(s)	10	70	15	220/230	Round Shaft	None	60
MYR 217.58	1 Piece(s)	Available	13 Day(s)	10	70	15	100	GN Type Spline Shaft	None	50/60
MYR 217.58	1 Piece(s)	Available	13 Day(s)	10	70	15	220/230	GN Type Spline Shaft	None	50
MYR 217.58	1 Piece(s)	Available	13 Day(s)	10	70	15	110/120	GN Type Spline Shaft	None	60
MYR 217.58	1 Piece(s)	Available	13 Day(s)	10	70	15	220/230	GN Type Spline Shaft	None	60
MYR 253.45	1 Piece(s)	Available	13 Day(s)	10	80	25	100	Round Shaft	None	50/60
MYR 253.45	1 Piece(s)	Available	13 Day(s)	10	80	25	220/230	Round Shaft	None	50
MYR 253.45	1 Piece(s)	Available	13 Day(s)	10	80	25	110/120	Round Shaft	None	60
MYR 253.45	1 Piece(s)	Available	13 Day(s)	10	80	25	220/230	Round Shaft	None	60
MYR 253.45	1 Piece(s)	Available	13 Day(s)	10	80	25	100	GN Type Spline Shaft	None	50/60
MYR 253.45	1 Piece(s)	Available	13 Day(s)	10	80	25	220/230	GN Type Spline Shaft	None	50
MYR 253.45	1 Piece(s)	Available	13 Day(s)	10	80	25	110/120	GN Type Spline Shaft	None	60
MYR 253.45	1 Piece(s)	Available	13 Day(s)	10	80	25	220/230	GN Type Spline Shaft	None	60
MYR 327.29	1 Piece(s)	Available	13 Day(s)	10	90	40	100	Round Shaft	None	50/60
MYR 327.29	1 Piece(s)	Available	13 Day(s)	10	90	40	220/230	Round Shaft	None	50
MYR 327.29	1 Piece(s)	Available	13 Day(s)	10	90	40	110/120	Round Shaft	None	60
MYR 327.29	1 Piece(s)	Available	13 Day(s)	10	90	40	220/230	Round Shaft	None	60
MYR 327.29	1 Piece(s)	Available	13 Day(s)	10	90	40	100	GN Type Spline Shaft	None	50/60
MYR 327.29	1 Piece(s)	Available	13 Day(s)	10	90	40	220/230	GN Type Spline Shaft	None	50
MYR 327.29	1 Piece(s)	Available	13 Day(s)	10	90	40	110/120	GN Type Spline Shaft	None	60
MYR 327.29	1 Piece(s)	Available	13 Day(s)	10	90	40	220/230	GN Type Spline Shaft	None	60
MYR 359.52	1 Piece(s)	Available	13 Day(s)	10	90	60	100	Round Shaft	Available	50/60
MYR 359.52	1 Piece(s)	Available	13 Day(s)	10	90	60	220/230	Round Shaft	Available	50
MYR 359.52	1 Piece(s)	Available	13 Day(s)	10	90	60	110/120	Round Shaft	Available	60
MYR 359.52	1 Piece(s)	Available	13 Day(s)	10	90	60	220/230	Round Shaft	Available	60
MYR 359.52	1 Piece(s)	Available	13 Day(s)	10	90	60	100	GN Type Spline Shaft	Available	50/60
MYR 359.52	1 Piece(s)	Available	13 Day(s)	10	90	60	220/230	GN Type Spline Shaft	Available	50
MYR 359.52	1 Piece(s)	Available	13 Day(s)	10	90	60	110/120	GN Type Spline Shaft	Available	60
MYR 359.52	1 Piece(s)	Available	13 Day(s)	10	90	60	220/230	GN Type Spline Shaft	Available	60
MYR 450.47	1 Piece(s)	Available	13 Day(s)	10	90	60	100	GU Type Spline Shaft	Available	50/60
MYR 359.52	1 Piece(s)	Available	13 Day(s)	10	90	60	220/230	GU Type Spline Shaft	Available	50
MYR 359.52	1 Piece(s)	Available	13 Day(s)	10	90	60	110/120	GU Type Spline Shaft	Available	60
MYR 359.52	1 Piece(s)	Available	13 Day(s)	10	90	60	220/230	GU Type Spline Shaft	Available	60
MYR 427.12	1 Piece(s)	Available	13 Day(s)	10	90	90	100	Round Shaft	Available	50/60
MYR 427.12	1 Piece(s)	Available	13 Day(s)	10	90	90	220/230	Round Shaft	Available	50
MYR 427.12	1 Piece(s)	Available	13 Day(s)	10	90	90	110/120	Round Shaft	Available	60
MYR 427.12	1 Piece(s)	Available	13 Day(s)	10	90	90	220/230	Round Shaft	Available	60
MYR 427.12	1 Piece(s)	Available	13 Day(s)	10	90	90	100	GU Type Spline Shaft	Available	50/60
MYR 427.12	1 Piece(s)	Available	13 Day(s)	10	90	90	220/230	GU Type Spline Shaft	Available	50
MYR 427.12	1 Piece(s)	Available	13 Day(s)	10	90	90	110/120	GU Type Spline Shaft	Available	60
MYR 427.12	1 Piece(s)	Available	13 Day(s)	10	90	90	220/230	GU Type Spline Shaft	Available	60
MYR 459.69	1 Piece(s)	Available	13 Day(s)	10	90	120	100	Round Shaft	Available	50/60
MYR 459.69	1 Piece(s)	Available	13 Day(s)	10	90	120	220/230	Round Shaft	Available	50
MYR 459.69	1 Piece(s)	Available	13 Day(s)	10	90	120	110/120	Round Shaft	Available	60
MYR 459.69	1 Piece(s)	Available	13 Day(s)	10	90	120	220/230	Round Shaft	Available	60
MYR 459.69	1 Piece(s)	Available	13 Day(s)	10	90	120	100	GU Type Spline Shaft	Available	50/60
MYR 459.69	1 Piece(s)	Available	13 Day(s)	10	90	120	220/230	GU Type Spline Shaft	Available	50
MYR 459.69	1 Piece(s)	Available	13 Day(s)	10	90	120	110/120	GU Type Spline Shaft	Available	60
MYR 459.69	1 Piece(s)	Available	13 Day(s)	10	90	120	220/230	GU Type Spline Shaft	Available	60
MYR 535.85	1 Piece(s)	Available	13 Day(s)	10	104	120	100	Round Shaft	Available	50/60
MYR 535.85	1 Piece(s)	Available	13 Day(s)	10	104	120	220/230	Round Shaft	Available	50
MYR 535.85	1 Piece(s)	Available	13 Day(s)	10	104	120	110/120	Round Shaft	Available	60
MYR 535.85	1 Piece(s)	Available	13 Day(s)	10	104	120	220/230	Round Shaft	Available	60
MYR 535.85	1 Piece(s)	Available	13 Day(s)	10	104	120	100	GU Type Spline Shaft	Available	50/60
MYR 535.85	1 Piece(s)	Available	13 Day(s)	10	104	120	220/230	GU Type Spline Shaft	Available	50
MYR 535.85	1 Piece(s)	Available	13 Day(s)	10	104	120	110/120	GU Type Spline Shaft	Available	60
MYR 535.85	1 Piece(s)	Available	13 Day(s)	10	104	120	220/230	GU Type Spline Shaft	Available	60
MYR 568.40	1 Piece(s)	Available	13 Day(s)	10	104	140	100	Round Shaft	Available	50/60
MYR 568.40	1 Piece(s)	Available	13 Day(s)	10	104	140	220/230	Round Shaft	Available	50
MYR 568.40	1 Piece(s)	Available	13 Day(s)	10	104	140	110/120	Round Shaft	Available	60
MYR 568.40	1 Piece(s)	Available	13 Day(s)	10	104	140	220/230	Round Shaft	Available	60
MYR 568.40	1 Piece(s)	Available	13 Day(s)	10	104	140	100	GU Type Spline Shaft	Available	50/60
MYR 568.40	1 Piece(s)	Available	13 Day(s)	10	104	140	220/230	GU Type Spline Shaft	Available	50
MYR 568.40	1 Piece(s)	Available	13 Day(s)	10	104	140	110/120	GU Type Spline Shaft	Available	60
MYR 568.40	1 Piece(s)	Available	13 Day(s)	10	104	140	220/230	GU Type Spline Shaft	Available	60
MYR 595.83	1 Piece(s)	Available	13 Day(s)	10	104	200	220/230	Round Shaft	Available	50
MYR 595.83	1 Piece(s)	Available	13 Day(s)	10	104	200	220/230	Round Shaft	Available	60
MYR 595.83	1 Piece(s)	Available	13 Day(s)	10	104	200	220/230	GU Type Spline Shaft	Available	50
MYR 595.83	1 Piece(s)	Available	13 Day(s)	10	104	200	220/230	GU Type Spline Shaft	Available	60

Basic Information

Type	Motor Only	Motor Type	Speed Control	Power Supply	1-phase
Gear Head Type	Not Provided	Electromagnetic Brakes, Clutches	Not Provided	Environment	Standard
Type	Speed Control Motor	T-BOX (Terminal Box)	None	Number of Poles	4 Poles

Configure

80 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Square Flange Dim. A(mm)
60

70

80

90

104
Clear
Rated Output(W)
6

15

25

40

60

90

120

140

200
Clear
Voltage(V)
100

110/120

220/230
Clear
Shaft End Shape
- GN Type Spline Shaft
- GU Type Spline Shaft
- Round Shaft
Clear
Fan
- Available
- None
Clear
Frequency(Hz)
- 50
- 50/60
- 60
Clear
type
- EA-AM
Clear
CAD
- 3D
Clear

Days to Ship

All

13 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Additional Products in this Category

Tech Support

: Technical Inquiry

How can we improve?

Small AC Speed Controller Motors 6-200W (Part Numbers)

Basic Information

Configure

Specification/Dimensions

Square Flange Dim. A(mm)

Rated Output(W)

Voltage(V)

Shaft End Shape

Fan

Frequency(Hz)

type

CAD

Days to Ship

Specify Alterations

Additional Products in this Category

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm