(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Flat Belt Conveyor, Head Drive, Full Profile (Part Numbers)
Click this image to zoom it.
Move the mouse over the image to zoom
- Economy
MiSUMi Economy
Economy series Belt Conveyor
(i)Caution
- This single-phase motor is specified for 220V ±10%,50Hz/60Hz. Please ensure it is used within the permissible voltage range.
Part Number
Configured Part Number is shown.
Product Overview
Economical conveyor, with a rational structural design and localized production. A variety of models are available to meet customers' design needs for different usage scenarios, providing better options.
E-SVKA/E-SVKB: This series uses a frame structure with integrated molding, featuring a simple design and easy assembly, resulting in low cost and short delivery time.
E-SVKA/E-SVKB: This series uses a frame structure with integrated molding, featuring a simple design and easy assembly, resulting in low cost and short delivery time.
Dimensional Drawing
E-SVKA/E-SVKB
When L > 1500, one belt support roller is included.
The dimensions in the figure are for belt specification H9 (thickness 0.9 mm). Please note that the belt thickness varies depending on the belt specifications.
Please refer to the flat belt specifications table. Click
here
When L ≤ 500, there is no countersunk hole at position F, and 4 nuts are pre-installed on one side inside the aluminum profile slot;
When L>500, a countersunk hole for nut insertion is reserved by default at position F, no additional processing is required.
When L>500, a countersunk hole for nut insertion is reserved by default at position F, no additional machining is required.
When selecting a speed control motor, the speed controller is an accessory, not installed on the main unit, and does not come with a mounting bracket.
If you need a bracket for the speed controller, please use additional processing (SCB)
*Only the power affects the motor size. Please refer to the table below for dimension A. The external dimensions of the other components remain the same.
■ A Size Detailed Table
Standard Nut Fitting Table for Profile Slot: L Value (Center Distance Unit: mm)
Motor Specification: 6W*
When L > 1500, one belt support roller is included.The dimensions in the figure are for belt specification H9 (thickness 0.9 mm). Please note that the belt thickness varies depending on the belt specifications.Please refer to the flat belt specifications table. Click
hereWhen L ≤ 500, there is no countersunk hole at position F, and 4 nuts are pre-installed on one side inside the aluminum profile slot;When L>500, a countersunk hole for nut insertion is reserved by default at position F, no additional processing is required.
When L>500, a countersunk hole for nut insertion is reserved by default at position F, no additional machining is required.When selecting a speed control motor, the speed controller is an accessory, not installed on the main unit, and does not come with a mounting bracket.If you need a bracket for the speed controller, please use additional processing (SCB)
*Only the power affects the motor size. Please refer to the table below for dimension A. The external dimensions of the other components remain the same.
■ A Size Detailed Table
| Motor Power | Motor | Reduction Ratio | A | |
| Specifications | Manufacturer | |||
| 6W | Speed Adjustable Type | TBI MOTION | 3 to 18 | L107 |
| 25 to 180 | L117 | |||
| Precision Grinding | 3 to 18 | L118 | ||
| 25 to 180 | L130 | |||
| 25W | Inverter Type/Variable Speed Type | TBI MOTION | 3 to 18 | L118 |
| 25 to 180 | L130 | |||
| Inverter Type | Precision Grinding | 3 to 18 | L119 | |
| 25 to 180 | L130 | |||
| Speed Adjustable Type | 3 to 18 | L129 | ||
| 25 to 180 | L140 | |||
| 40W | Inverter Type/Variable Speed Type | TBI MOTION | 3 to 18 | L148 |
| 25 to 180 | L166 | |||
| Inverter Type | Precision Grinding | 3 to 18 | L152 | |
| 25 to 180 | L172 | |||
| Speed Adjustable Type | 3 to 18 | L162 | ||
| 25 to 180 | L182 | |||
Enlarged Profile View (Symmetrical Left and Right)
Standard Nut Fitting Table for Profile Slot: L Value (Center Distance Unit: mm)
| L390 to 999 | L1000 to 1499 | L1500 or more | Position | Specifications | Configuration Type |
| 4PCS | 6PCS | 8PCS | Section I (Left/Right) | M5 (Square) | Accessories |
Material Table
| Part Name |  Material |  Surface Treatment |
| Profile | Aluminum Material | Electrophoresis |
| Motor Cover Plate | Aluminum Material | Spray Painting and Baking Finish |
| Pulley Holder | Aluminum Material | Spray Painting and Baking Finish |
Specifications Overview
■ Flat Belt Width - Pulley Center Distance Correspondence Table
| Part number | Belt Width B | Pulley Center Distance L | |||||
| L390 to 400 | L405 to 500 | L505 to 600 | L605 to 700 | L705 to 800 | L805 to 3000 | ||
| E-SVKA E-SVKB | 50 | ● | ● | ● | ● | ● | ● |
| 100 | ● | ● | ● | ● | ● | ● | |
| 150 | - | - | ● | ● | ● | ● | |
| 200 | - | - | - | ● | ● | ● | |
| 250 | - | - | - | - | - | ● | |
Alterations
 |  Part Number | - |  B | - |  L | - | Motor Selection | - |  Belt Specifications | - |  Motor Manufacturer Selection | - | Alteration | ||||
 Output Power | - |  Specifications | - |  Gear Head Reduction Ratio | |||||||||||||
| E-SVKA | - | 150 | - | 1000 | - | 25 | - | SCM | - | 25 | - | H9 | - | G | - | MK | |
| Alterations | Code | Spec |
Motor Installation Position Reversed | MK | The motor installation position can be changed. Specification MethodMK Only head-driven type can be specified. |
Mounting Bracket for Speed Controller | SCB | Includes mounting bracket for speed controller. Specifying method SCB |
Specification Table
Please order after selecting part number and parameters according to the selection steps 
to 
.
■Specification Table
The belt thickness is the nominal thickness; the actual thickness is one-tenth of that, measured in millimeters.
Oil-resistant specification: Only the conveying surface is oil-resistant. If oil gets on the back of the belt, it may become unusable.
If you need automatic control with a stepper or servo motor, you can choose the model without a motor and gear head.
When selecting without a motor and gear head, the motor mounting hole pitch will vary depending on the motor output power.
When selecting without motor and gear head, the main unit will be delivered as parts. Please assemble by following the assembly instructions included in the same package.
For belts other than those listed above, please refer to the specification overview. Click here.
When the selected size 
L exceeds ( ) value, confirmation of shipping days may be required prior to placing an order or requesting a quotation due to transportation constraints.
to . | Part Number | - | B | - | L | - | Motor Selection | - | Belt Specifications | - | Motor Manufacturer Selection | ||||
| Output Power | - | Specifications | - | Gear Head Reduction Ratio | |||||||||||
| Without belt Without motor or gear head | E-SVKA E-SVKA E-SVKA | - - - | 150 150 150 | - - - | 1000 1000 1000 | - - - | 25 25 25 | - - - | SCM INV NM | - - - | 25 25 NH | - - - | H9 J H9 | - - - | G G R |
■Specification Table
| Part Number | Shape | Model Features |
| E-SVKA | Curved Surface Roller Anti-Deviation | The belt has good flatness and high surface accuracy |
| E-SVKB | Belt with Guide Strip to Prevent Deviation | The belt runs stably without deviation, but there is a slight bulge at the joint of the center guide strip on the flat belt. |
| Part Number | B Selection | L Can be specified down to 5mm increments | Motor Selection | Belt Specifications (Material is generally PU) | Motor | ||
| Output Power (W) | Specifications | Gear Head Reduction Ratio | |||||
| E-SVKA (Arc Surface Roller Type) E-SVKB (With Guide Bar) | 50 100 150 200 250 | 390 to 3000 (2465) | 6 25 40 Note: 6 Not suitable for frequency conversion | SCM (Single-phase 220 V Speed Control Type) | 5 7.5 10 12.5 15 18 25 30 36 50 60 75 90 100 120 150 180 Note: When the output power is 6, 5–10 is not applicable | H9 (General Use · Green) W9(General Use · White) U5(For Sliding · Green) S5(For Sliding · White) D9(For Anti-Static · Black) F12(For Food Conveyance · White) O14(Oil Resistant Spec · Green) Q10(For Inclined Use · Green) Y12(General Use · Yellow PVC) V12(General Use · Red PVC) J(No Belt) | G(Taibang Motor) J(Precision Motor) |
| INV (Three-phase 220 V Inverter Type) | |||||||
| NM(No Motor) | NH(No Gear Head) | R(No Motor · Gear Head) | |||||
The belt thickness is the nominal thickness; the actual thickness is one-tenth of that, measured in millimeters.Oil-resistant specification: Only the conveying surface is oil-resistant. If oil gets on the back of the belt, it may become unusable.If you need automatic control with a stepper or servo motor, you can choose the model without a motor and gear head.When selecting without a motor and gear head, the motor mounting hole pitch will vary depending on the motor output power.When selecting without motor and gear head, the main unit will be delivered as parts. Please assemble by following the assembly instructions included in the same package.For belts other than those listed above, please refer to the specification overview. Click here.When the selected size L exceeds ( ) value, confirmation of shipping days may be required prior to placing an order or requesting a quotation due to transportation constraints.■ Transmission Capacity
The chart shows the transport capacity under horizontal conditions.
Carrying capacity may vary depending on usage conditions.
When selecting a speed control motor, the conveying capacity does not increase as the speed decreases.
The chart shows the transport capacity under horizontal conditions.Carrying capacity may vary depending on usage conditions.When selecting a speed control motor, the conveying capacity does not increase as the speed decreases.■ Gear Head Reduction Ratio
| Gear Head Reduction Ratio | Flat Belt Speed (m/min) | |
| SCM Speed Control Type | INV Inverter Type | |
| 5 | 30.5 to 50.9 | 63.3 |
| 7.5 | 20.3 to 33.9 | 42.2 |
| 10 | 15.3 to 25.4 | 31.7 |
| 12.5 | 12.2 to 20.3 | 25.3 |
| 15 | 10.2 to 17.0 | 21.1 |
| 18 | 8.5 to 14.1 | 17.6 |
| 25 | 6.1 to 10.2 | 12.7 |
| 30 | 5.1 to 8.5 | 10.6 |
| 36 | 4.2 to 7.1 | 8.8 |
| 50 | 3.1 to 5.1 | 6.3 |
| 60 | 2.5 to 4.2 | 5.3 |
| 75 | 2.0 to 3.4 | 4.2 |
| 90 | 1.7 to 2.8 | 3.5 |
| 100 | 1.5 to 2.5 | 3.2 |
| 120 | 1.3 to 2.1 | 2.6 |
| 150 | 1.0 to 1.7 | 2.1 |
| 180 | 0.8 to 1.4 | 1.8 |
Product Features
Feature 1: The conveyor body is made of aluminum profiles, achieving an overall lightweight design.
Feature 2: Light load, edge-wrapped design, suitable for customized freely specified length and width.
Feature 3: Belt width can be specified in units of 50 mm, and pulley spacing can be specified in units of 5 mm.
Feature 2: Light load, edge-wrapped design, suitable for customized freely specified length and width.
Feature 3: Belt width can be specified in units of 50 mm, and pulley spacing can be specified in units of 5 mm.
Precautions
(1) Do not disassemble or modify the conveyor by yourself to avoid performance issues.
(2) Due to different conveyor operating environments, MISUMI conveyors do not come with a power supply, cables, or switches.
(3) Due to issues with machine structure strength and body deformation, please do not exceed the allowable load and length/width when selecting a model.
(4) The motor is available in two voltage specifications: single-phase 220 V and three-phase 220 V. Please select the voltage according to your requirements.
(5) Belt misalignment is a normal phenomenon and is not considered a quality issue. Adjusting for misalignment is part of routine maintenance.
(6) Lateral Deviation Tolerance: The distance between both sides of the roller and the belt is 5±3 mm. During operation, it is not possible to ensure that the belt always stays exactly in the center of the aluminum profile. For deviation adjustment methods, clickhere.
(7) If operated in the opposite direction to the standard running direction, abnormal conditions such as belt misalignment, belt damage, noise, or jamming may occur. Please avoid use. (The standard shipping direction is as shown below)
(2) Due to different conveyor operating environments, MISUMI conveyors do not come with a power supply, cables, or switches.
(3) Due to issues with machine structure strength and body deformation, please do not exceed the allowable load and length/width when selecting a model.
(4) The motor is available in two voltage specifications: single-phase 220 V and three-phase 220 V. Please select the voltage according to your requirements.
(5) Belt misalignment is a normal phenomenon and is not considered a quality issue. Adjusting for misalignment is part of routine maintenance.
(6) Lateral Deviation Tolerance: The distance between both sides of the roller and the belt is 5±3 mm. During operation, it is not possible to ensure that the belt always stays exactly in the center of the aluminum profile. For deviation adjustment methods, click
here.(7) If operated in the opposite direction to the standard running direction, abnormal conditions such as belt misalignment, belt damage, noise, or jamming may occur. Please avoid use. (The standard shipping direction is as shown below)
Application Industries
| Equipment Production | Semiconductor | Lithium battery | ||
 |  |  | ||
| Food | Electronic & Electrical Appliances | Robotics | ||
 |  |  |
Related Products
| Economy Conveyor Flat Belt Center Drive Type, All Profiles | Economy Conveyor Flat Belt Head Drive, Pulley Diameter 30 mm | Economy Conveyor Full Belt Head Drive, Pulley Diameter 30 mm | ||
 |  |  | ||
| Representative Model: E-SVKN | Representative Model: E-CVGA | Representative Model: E-CVSFA |
Related Documents
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| E-SVKA-[50,100,150,200,250]-[390-3000/5]-6-[NM,SCM]-NH-D9-[G,J,R] |
| E-SVKA-[50,100,150,200,250]-[390-3000/5]-6-[NM,SCM]-NH-F12-[G,J,R] |
| E-SVKA-[50,100,150,200,250]-[390-3000/5]-6-[NM,SCM]-NH-FS12-[G,J,R] |
| E-SVKA-[50,100,150,200,250]-[390-3000/5]-6-[NM,SCM]-NH-H9-[G,J,R] |
| E-SVKA-[50,100,150,200,250]-[390-3000/5]-6-[NM,SCM]-NH-J-[G,J,R] |
| E-SVKA-[50,100,150,200,250]-[390-3000/5]-6-[NM,SCM]-NH-O14-[G,J,R] |
| E-SVKA-[50,100,150,200,250]-[390-3000/5]-6-[NM,SCM]-NH-Q10-[G,J,R] |
| E-SVKA-[50,100,150,200,250]-[390-3000/5]-6-[NM,SCM]-NH-S5-[G,J,R] |
| E-SVKA-[50,100,150,200,250]-[390-3000/5]-6-[NM,SCM]-NH-U5-[G,J,R] |
| E-SVKA-[50,100,150,200,250]-[390-3000/5]-6-[NM,SCM]-NH-V12-[G,J,R] |
| E-SVKA-[50,100,150,200,250]-[390-3000/5]-6-[NM,SCM]-NH-W9-[G,J,R] |
| E-SVKA-[50,100,150,200,250]-[390-3000/5]-6-[NM,SCM]-NH-Y12-[G,J,R] |
| E-SVKA-[50,100,150,200,250]-[390-3000/5]-6-SCM-[5,7.5,10,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180]-D9-[G,J,R] |
| E-SVKA-[50,100,150,200,250]-[390-3000/5]-6-SCM-[5,7.5,10,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180]-F12-[G,J,R] |
| E-SVKA-[50,100,150,200,250]-[390-3000/5]-6-SCM-[5,7.5,10,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180]-FS12-[G,J,R] |
| E-SVKA-[50,100,150,200,250]-[390-3000/5]-6-SCM-[5,7.5,10,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180]-H9-[G,J,R] |
| E-SVKA-[50,100,150,200,250]-[390-3000/5]-6-SCM-[5,7.5,10,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180]-J-[G,J,R] |
| E-SVKA-[50,100,150,200,250]-[390-3000/5]-6-SCM-[5,7.5,10,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180]-O14-[G,J,R] |
| E-SVKA-[50,100,150,200,250]-[390-3000/5]-6-SCM-[5,7.5,10,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180]-Q10-[G,J,R] |
| E-SVKA-[50,100,150,200,250]-[390-3000/5]-6-SCM-[5,7.5,10,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180]-S5-[G,J,R] |
| E-SVKA-[50,100,150,200,250]-[390-3000/5]-6-SCM-[5,7.5,10,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180]-U5-[G,J,R] |
| E-SVKA-[50,100,150,200,250]-[390-3000/5]-6-SCM-[5,7.5,10,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180]-V12-[G,J,R] |
| E-SVKA-[50,100,150,200,250]-[390-3000/5]-6-SCM-[5,7.5,10,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180]-W9-[G,J,R] |
| E-SVKA-[50,100,150,200,250]-[390-3000/5]-6-SCM-[5,7.5,10,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180]-Y12-[G,J,R] |
| E-SVKA-[50,100,150,200,250]-[390-3000/5]-[25,40,60]-[INV,NM,SCM]-NH-D9-[G,J,R] |
| E-SVKA-[50,100,150,200,250]-[390-3000/5]-[25,40,60]-[INV,NM,SCM]-NH-F12-[G,J,R] |
| E-SVKA-[50,100,150,200,250]-[390-3000/5]-[25,40,60]-[INV,NM,SCM]-NH-FS12-[G,J,R] |
| E-SVKA-[50,100,150,200,250]-[390-3000/5]-[25,40,60]-[INV,NM,SCM]-NH-H9-[G,J,R] |
| E-SVKA-[50,100,150,200,250]-[390-3000/5]-[25,40,60]-[INV,NM,SCM]-NH-J-[G,J,R] |
| E-SVKA-[50,100,150,200,250]-[390-3000/5]-[25,40,60]-[INV,NM,SCM]-NH-O14-[G,J,R] |
| E-SVKA-[50,100,150,200,250]-[390-3000/5]-[25,40,60]-[INV,NM,SCM]-NH-Q10-[G,J,R] |
| E-SVKA-[50,100,150,200,250]-[390-3000/5]-[25,40,60]-[INV,NM,SCM]-NH-S5-[G,J,R] |
| E-SVKA-[50,100,150,200,250]-[390-3000/5]-[25,40,60]-[INV,NM,SCM]-NH-U5-[G,J,R] |
| E-SVKA-[50,100,150,200,250]-[390-3000/5]-[25,40,60]-[INV,NM,SCM]-NH-V12-[G,J,R] |
| E-SVKA-[50,100,150,200,250]-[390-3000/5]-[25,40,60]-[INV,NM,SCM]-NH-W9-[G,J,R] |
| E-SVKA-[50,100,150,200,250]-[390-3000/5]-[25,40,60]-[INV,NM,SCM]-NH-Y12-[G,J,R] |
| E-SVKA-[50,100,150,200,250]-[390-3000/5]-[25,40,60]-[INV,SCM]-[5,7.5,10,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180]-D9-[G,J,R] |
| E-SVKA-[50,100,150,200,250]-[390-3000/5]-[25,40,60]-[INV,SCM]-[5,7.5,10,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180]-F12-[G,J,R] |
| E-SVKA-[50,100,150,200,250]-[390-3000/5]-[25,40,60]-[INV,SCM]-[5,7.5,10,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180]-FS12-[G,J,R] |
| E-SVKA-[50,100,150,200,250]-[390-3000/5]-[25,40,60]-[INV,SCM]-[5,7.5,10,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180]-H9-[G,J,R] |
| E-SVKA-[50,100,150,200,250]-[390-3000/5]-[25,40,60]-[INV,SCM]-[5,7.5,10,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180]-J-[G,J,R] |
| E-SVKA-[50,100,150,200,250]-[390-3000/5]-[25,40,60]-[INV,SCM]-[5,7.5,10,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180]-O14-[G,J,R] |
| E-SVKA-[50,100,150,200,250]-[390-3000/5]-[25,40,60]-[INV,SCM]-[5,7.5,10,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180]-Q10-[G,J,R] |
| E-SVKA-[50,100,150,200,250]-[390-3000/5]-[25,40,60]-[INV,SCM]-[5,7.5,10,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180]-S5-[G,J,R] |
| E-SVKA-[50,100,150,200,250]-[390-3000/5]-[25,40,60]-[INV,SCM]-[5,7.5,10,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180]-U5-[G,J,R] |
| E-SVKA-[50,100,150,200,250]-[390-3000/5]-[25,40,60]-[INV,SCM]-[5,7.5,10,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180]-V12-[G,J,R] |
| E-SVKA-[50,100,150,200,250]-[390-3000/5]-[25,40,60]-[INV,SCM]-[5,7.5,10,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180]-W9-[G,J,R] |
| E-SVKA-[50,100,150,200,250]-[390-3000/5]-[25,40,60]-[INV,SCM]-[5,7.5,10,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180]-Y12-[G,J,R] |
| E-SVKB-[50,100,150,200,250]-[390-3000/5]-6-[NM,SCM]-NH-D9-[G,J,R] |
| E-SVKB-[50,100,150,200,250]-[390-3000/5]-6-[NM,SCM]-NH-F12-[G,J,R] |
| E-SVKB-[50,100,150,200,250]-[390-3000/5]-6-[NM,SCM]-NH-H9-[G,J,R] |
| E-SVKB-[50,100,150,200,250]-[390-3000/5]-6-[NM,SCM]-NH-J-[G,J,R] |
| E-SVKB-[50,100,150,200,250]-[390-3000/5]-6-[NM,SCM]-NH-O14-[G,J,R] |
| E-SVKB-[50,100,150,200,250]-[390-3000/5]-6-[NM,SCM]-NH-Q10-[G,J,R] |
| E-SVKB-[50,100,150,200,250]-[390-3000/5]-6-[NM,SCM]-NH-S5-[G,J,R] |
| E-SVKB-[50,100,150,200,250]-[390-3000/5]-6-[NM,SCM]-NH-U5-[G,J,R] |
| E-SVKB-[50,100,150,200,250]-[390-3000/5]-6-[NM,SCM]-NH-V12-[G,J,R] |
| E-SVKB-[50,100,150,200,250]-[390-3000/5]-6-[NM,SCM]-NH-W9-[G,J,R] |
| E-SVKB-[50,100,150,200,250]-[390-3000/5]-6-[NM,SCM]-NH-Y12-[G,J,R] |
| E-SVKB-[50,100,150,200,250]-[390-3000/5]-6-SCM-[5,7.5,10,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180]-D9-[G,J,R] |
| E-SVKB-[50,100,150,200,250]-[390-3000/5]-6-SCM-[5,7.5,10,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180]-F12-[G,J,R] |
| E-SVKB-[50,100,150,200,250]-[390-3000/5]-6-SCM-[5,7.5,10,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180]-H9-[G,J,R] |
| E-SVKB-[50,100,150,200,250]-[390-3000/5]-6-SCM-[5,7.5,10,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180]-J-[G,J,R] |
| E-SVKB-[50,100,150,200,250]-[390-3000/5]-6-SCM-[5,7.5,10,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180]-O14-[G,J,R] |
| E-SVKB-[50,100,150,200,250]-[390-3000/5]-6-SCM-[5,7.5,10,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180]-Q10-[G,J,R] |
| E-SVKB-[50,100,150,200,250]-[390-3000/5]-6-SCM-[5,7.5,10,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180]-S5-[G,J,R] |
| E-SVKB-[50,100,150,200,250]-[390-3000/5]-6-SCM-[5,7.5,10,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180]-U5-[G,J,R] |
| E-SVKB-[50,100,150,200,250]-[390-3000/5]-6-SCM-[5,7.5,10,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180]-V12-[G,J,R] |
| E-SVKB-[50,100,150,200,250]-[390-3000/5]-6-SCM-[5,7.5,10,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180]-W9-[G,J,R] |
| E-SVKB-[50,100,150,200,250]-[390-3000/5]-6-SCM-[5,7.5,10,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180]-Y12-[G,J,R] |
| E-SVKB-[50,100,150,200,250]-[390-3000/5]-[25,40]-[INV,NM,SCM]-NH-D9-[G,J,R] |
| E-SVKB-[50,100,150,200,250]-[390-3000/5]-[25,40]-[INV,NM,SCM]-NH-F12-[G,J,R] |
| E-SVKB-[50,100,150,200,250]-[390-3000/5]-[25,40]-[INV,NM,SCM]-NH-H9-[G,J,R] |
| E-SVKB-[50,100,150,200,250]-[390-3000/5]-[25,40]-[INV,NM,SCM]-NH-J-[G,J,R] |
| E-SVKB-[50,100,150,200,250]-[390-3000/5]-[25,40]-[INV,NM,SCM]-NH-O14-[G,J,R] |
| E-SVKB-[50,100,150,200,250]-[390-3000/5]-[25,40]-[INV,NM,SCM]-NH-Q10-[G,J,R] |
| E-SVKB-[50,100,150,200,250]-[390-3000/5]-[25,40]-[INV,NM,SCM]-NH-S5-[G,J,R] |
| E-SVKB-[50,100,150,200,250]-[390-3000/5]-[25,40]-[INV,NM,SCM]-NH-U5-[G,J,R] |
| E-SVKB-[50,100,150,200,250]-[390-3000/5]-[25,40]-[INV,NM,SCM]-NH-V12-[G,J,R] |
| E-SVKB-[50,100,150,200,250]-[390-3000/5]-[25,40]-[INV,NM,SCM]-NH-W9-[G,J,R] |
| E-SVKB-[50,100,150,200,250]-[390-3000/5]-[25,40]-[INV,NM,SCM]-NH-Y12-[G,J,R] |
| E-SVKB-[50,100,150,200,250]-[390-3000/5]-[25,40]-[INV,SCM]-[5,7.5,10,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180]-D9-[G,J,R] |
| E-SVKB-[50,100,150,200,250]-[390-3000/5]-[25,40]-[INV,SCM]-[5,7.5,10,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180]-F12-[G,J,R] |
| E-SVKB-[50,100,150,200,250]-[390-3000/5]-[25,40]-[INV,SCM]-[5,7.5,10,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180]-H9-[G,J,R] |
| E-SVKB-[50,100,150,200,250]-[390-3000/5]-[25,40]-[INV,SCM]-[5,7.5,10,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180]-J-[G,J,R] |
| E-SVKB-[50,100,150,200,250]-[390-3000/5]-[25,40]-[INV,SCM]-[5,7.5,10,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180]-O14-[G,J,R] |
| E-SVKB-[50,100,150,200,250]-[390-3000/5]-[25,40]-[INV,SCM]-[5,7.5,10,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180]-Q10-[G,J,R] |
| E-SVKB-[50,100,150,200,250]-[390-3000/5]-[25,40]-[INV,SCM]-[5,7.5,10,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180]-S5-[G,J,R] |
| E-SVKB-[50,100,150,200,250]-[390-3000/5]-[25,40]-[INV,SCM]-[5,7.5,10,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180]-U5-[G,J,R] |
| E-SVKB-[50,100,150,200,250]-[390-3000/5]-[25,40]-[INV,SCM]-[5,7.5,10,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180]-V12-[G,J,R] |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Conveyance Length | Belt Width/Belt Pitch B (mm) | Meandering Prevention | Type | Output Power (W) | Specifications | Gear Head Reduction Ratio | Belt Specifications | Motor |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Crowned roller for meandering prevention | 6 | SCM (Single-phase 220 V Speed Control Type) / NM (No Motor) | NH (Gearless Head) | For Anti-Static Use · Black | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Crowned roller for meandering prevention | 6 | SCM (Single-phase 220 V Speed Control Type) / NM (No Motor) | NH (Gearless Head) | For Food Conveyance · White | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Crowned roller for meandering prevention | 6 | SCM (Single-phase 220 V Speed Control Type) / NM (No Motor) | NH (Gearless Head) | For Food Conveyance · White | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Crowned roller for meandering prevention | 6 | SCM (Single-phase 220 V Speed Control Type) / NM (No Motor) | NH (Gearless Head) | General Use · Green | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Crowned roller for meandering prevention | 6 | SCM (Single-phase 220 V Speed Control Type) / NM (No Motor) | NH (Gearless Head) | No belt | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Crowned roller for meandering prevention | 6 | SCM (Single-phase 220 V Speed Control Type) / NM (No Motor) | NH (Gearless Head) | Oil-resistant Specification · Green | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Crowned roller for meandering prevention | 6 | SCM (Single-phase 220 V Speed Control Type) / NM (No Motor) | NH (Gearless Head) | For Incline · Green | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Crowned roller for meandering prevention | 6 | SCM (Single-phase 220 V Speed Control Type) / NM (No Motor) | NH (Gearless Head) | For Sliding · White | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Crowned roller for meandering prevention | 6 | SCM (Single-phase 220 V Speed Control Type) / NM (No Motor) | NH (Gearless Head) | For Sliding · Green | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Crowned roller for meandering prevention | 6 | SCM (Single-phase 220 V Speed Control Type) / NM (No Motor) | NH (Gearless Head) | General Use · Red PVC | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Crowned roller for meandering prevention | 6 | SCM (Single-phase 220 V Speed Control Type) / NM (No Motor) | NH (Gearless Head) | General Use · White | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Crowned roller for meandering prevention | 6 | SCM (Single-phase 220 V Speed Control Type) / NM (No Motor) | NH (Gearless Head) | General Use · Yellow PVC | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Crowned roller for meandering prevention | 6 | SCM (Single-phase 220 V Speed Control Type) | 5 ～ 180 | For Anti-Static Use · Black | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Crowned roller for meandering prevention | 6 | SCM (Single-phase 220 V Speed Control Type) | 5 ～ 180 | For Food Conveyance · White | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Crowned roller for meandering prevention | 6 | SCM (Single-phase 220 V Speed Control Type) | 5 ～ 180 | For Food Conveyance · White | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Crowned roller for meandering prevention | 6 | SCM (Single-phase 220 V Speed Control Type) | 5 ～ 180 | General Use · Green | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Crowned roller for meandering prevention | 6 | SCM (Single-phase 220 V Speed Control Type) | 5 ～ 180 | No belt | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Crowned roller for meandering prevention | 6 | SCM (Single-phase 220 V Speed Control Type) | 5 ～ 180 | Oil-resistant Specification · Green | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Crowned roller for meandering prevention | 6 | SCM (Single-phase 220 V Speed Control Type) | 5 ～ 180 | For Incline · Green | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Crowned roller for meandering prevention | 6 | SCM (Single-phase 220 V Speed Control Type) | 5 ～ 180 | For Sliding · White | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Crowned roller for meandering prevention | 6 | SCM (Single-phase 220 V Speed Control Type) | 5 ～ 180 | For Sliding · Green | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Crowned roller for meandering prevention | 6 | SCM (Single-phase 220 V Speed Control Type) | 5 ～ 180 | General Use · Red PVC | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Crowned roller for meandering prevention | 6 | SCM (Single-phase 220 V Speed Control Type) | 5 ～ 180 | General Use · White | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Crowned roller for meandering prevention | 6 | SCM (Single-phase 220 V Speed Control Type) | 5 ～ 180 | General Use · Yellow PVC | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Crowned roller for meandering prevention | 25 ～ 60 | INV (Three-phase 220 V Inverter Type) / SCM (Single-phase 220 V Speed Control Type) / NM (No Motor) | NH (Gearless Head) | For Anti-Static Use · Black | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Crowned roller for meandering prevention | 25 ～ 60 | INV (Three-phase 220 V Inverter Type) / SCM (Single-phase 220 V Speed Control Type) / NM (No Motor) | NH (Gearless Head) | For Food Conveyance · White | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Crowned roller for meandering prevention | 25 ～ 60 | INV (Three-phase 220 V Inverter Type) / SCM (Single-phase 220 V Speed Control Type) / NM (No Motor) | NH (Gearless Head) | For Food Conveyance · White | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Crowned roller for meandering prevention | 25 ～ 60 | INV (Three-phase 220 V Inverter Type) / SCM (Single-phase 220 V Speed Control Type) / NM (No Motor) | NH (Gearless Head) | General Use · Green | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Crowned roller for meandering prevention | 25 ～ 60 | INV (Three-phase 220 V Inverter Type) / SCM (Single-phase 220 V Speed Control Type) / NM (No Motor) | NH (Gearless Head) | No belt | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Crowned roller for meandering prevention | 25 ～ 60 | INV (Three-phase 220 V Inverter Type) / SCM (Single-phase 220 V Speed Control Type) / NM (No Motor) | NH (Gearless Head) | Oil-resistant Specification · Green | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Crowned roller for meandering prevention | 25 ～ 60 | INV (Three-phase 220 V Inverter Type) / SCM (Single-phase 220 V Speed Control Type) / NM (No Motor) | NH (Gearless Head) | For Incline · Green | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Crowned roller for meandering prevention | 25 ～ 60 | INV (Three-phase 220 V Inverter Type) / SCM (Single-phase 220 V Speed Control Type) / NM (No Motor) | NH (Gearless Head) | For Sliding · White | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Crowned roller for meandering prevention | 25 ～ 60 | INV (Three-phase 220 V Inverter Type) / SCM (Single-phase 220 V Speed Control Type) / NM (No Motor) | NH (Gearless Head) | For Sliding · Green | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Crowned roller for meandering prevention | 25 ～ 60 | INV (Three-phase 220 V Inverter Type) / SCM (Single-phase 220 V Speed Control Type) / NM (No Motor) | NH (Gearless Head) | General Use · Red PVC | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Crowned roller for meandering prevention | 25 ～ 60 | INV (Three-phase 220 V Inverter Type) / SCM (Single-phase 220 V Speed Control Type) / NM (No Motor) | NH (Gearless Head) | General Use · White | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Crowned roller for meandering prevention | 25 ～ 60 | INV (Three-phase 220 V Inverter Type) / SCM (Single-phase 220 V Speed Control Type) / NM (No Motor) | NH (Gearless Head) | General Use · Yellow PVC | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Crowned roller for meandering prevention | 25 ～ 60 | INV (Three-phase 220 V Inverter Type) / SCM (Single-phase 220 V Speed Control Type) | 5 ～ 180 | For Anti-Static Use · Black | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Crowned roller for meandering prevention | 25 ～ 60 | INV (Three-phase 220 V Inverter Type) / SCM (Single-phase 220 V Speed Control Type) | 5 ～ 180 | For Food Conveyance · White | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Crowned roller for meandering prevention | 25 ～ 60 | INV (Three-phase 220 V Inverter Type) / SCM (Single-phase 220 V Speed Control Type) | 5 ～ 180 | For Food Conveyance · White | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Crowned roller for meandering prevention | 25 ～ 60 | INV (Three-phase 220 V Inverter Type) / SCM (Single-phase 220 V Speed Control Type) | 5 ～ 180 | General Use · Green | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Crowned roller for meandering prevention | 25 ～ 60 | INV (Three-phase 220 V Inverter Type) / SCM (Single-phase 220 V Speed Control Type) | 5 ～ 180 | No belt | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Crowned roller for meandering prevention | 25 ～ 60 | INV (Three-phase 220 V Inverter Type) / SCM (Single-phase 220 V Speed Control Type) | 5 ～ 180 | Oil-resistant Specification · Green | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Crowned roller for meandering prevention | 25 ～ 60 | INV (Three-phase 220 V Inverter Type) / SCM (Single-phase 220 V Speed Control Type) | 5 ～ 180 | For Incline · Green | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Crowned roller for meandering prevention | 25 ～ 60 | INV (Three-phase 220 V Inverter Type) / SCM (Single-phase 220 V Speed Control Type) | 5 ～ 180 | For Sliding · White | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Crowned roller for meandering prevention | 25 ～ 60 | INV (Three-phase 220 V Inverter Type) / SCM (Single-phase 220 V Speed Control Type) | 5 ～ 180 | For Sliding · Green | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Crowned roller for meandering prevention | 25 ～ 60 | INV (Three-phase 220 V Inverter Type) / SCM (Single-phase 220 V Speed Control Type) | 5 ～ 180 | General Use · Red PVC | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Crowned roller for meandering prevention | 25 ～ 60 | INV (Three-phase 220 V Inverter Type) / SCM (Single-phase 220 V Speed Control Type) | 5 ～ 180 | General Use · White | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | Pulley crowned for meandering prevention | Crowned roller for meandering prevention | 25 ～ 60 | INV (Three-phase 220 V Inverter Type) / SCM (Single-phase 220 V Speed Control Type) | 5 ～ 180 | General Use · Yellow PVC | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | With Meandering Prevention Crosspiece | Belt with meandering prevention crosspieces | 6 | SCM (Single-phase 220 V Speed Control Type) / NM (No Motor) | NH (Gearless Head) | For Anti-Static Use · Black | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | With Meandering Prevention Crosspiece | Belt with meandering prevention crosspieces | 6 | SCM (Single-phase 220 V Speed Control Type) / NM (No Motor) | NH (Gearless Head) | For Food Conveyance · White | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | With Meandering Prevention Crosspiece | Belt with meandering prevention crosspieces | 6 | SCM (Single-phase 220 V Speed Control Type) / NM (No Motor) | NH (Gearless Head) | General Use · Green | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | With Meandering Prevention Crosspiece | Belt with meandering prevention crosspieces | 6 | SCM (Single-phase 220 V Speed Control Type) / NM (No Motor) | NH (Gearless Head) | No belt | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | With Meandering Prevention Crosspiece | Belt with meandering prevention crosspieces | 6 | SCM (Single-phase 220 V Speed Control Type) / NM (No Motor) | NH (Gearless Head) | Oil-resistant Specification · Green | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | With Meandering Prevention Crosspiece | Belt with meandering prevention crosspieces | 6 | SCM (Single-phase 220 V Speed Control Type) / NM (No Motor) | NH (Gearless Head) | For Incline · Green | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | With Meandering Prevention Crosspiece | Belt with meandering prevention crosspieces | 6 | SCM (Single-phase 220 V Speed Control Type) / NM (No Motor) | NH (Gearless Head) | For Sliding · White | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | With Meandering Prevention Crosspiece | Belt with meandering prevention crosspieces | 6 | SCM (Single-phase 220 V Speed Control Type) / NM (No Motor) | NH (Gearless Head) | For Sliding · Green | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | With Meandering Prevention Crosspiece | Belt with meandering prevention crosspieces | 6 | SCM (Single-phase 220 V Speed Control Type) / NM (No Motor) | NH (Gearless Head) | General Use · Red PVC | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | With Meandering Prevention Crosspiece | Belt with meandering prevention crosspieces | 6 | SCM (Single-phase 220 V Speed Control Type) / NM (No Motor) | NH (Gearless Head) | General Use · White | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | With Meandering Prevention Crosspiece | Belt with meandering prevention crosspieces | 6 | SCM (Single-phase 220 V Speed Control Type) / NM (No Motor) | NH (Gearless Head) | General Use · Yellow PVC | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | With Meandering Prevention Crosspiece | Belt with meandering prevention crosspieces | 6 | SCM (Single-phase 220 V Speed Control Type) | 5 ～ 180 | For Anti-Static Use · Black | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | With Meandering Prevention Crosspiece | Belt with meandering prevention crosspieces | 6 | SCM (Single-phase 220 V Speed Control Type) | 5 ～ 180 | For Food Conveyance · White | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | With Meandering Prevention Crosspiece | Belt with meandering prevention crosspieces | 6 | SCM (Single-phase 220 V Speed Control Type) | 5 ～ 180 | General Use · Green | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | With Meandering Prevention Crosspiece | Belt with meandering prevention crosspieces | 6 | SCM (Single-phase 220 V Speed Control Type) | 5 ～ 180 | No belt | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | With Meandering Prevention Crosspiece | Belt with meandering prevention crosspieces | 6 | SCM (Single-phase 220 V Speed Control Type) | 5 ～ 180 | Oil-resistant Specification · Green | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | With Meandering Prevention Crosspiece | Belt with meandering prevention crosspieces | 6 | SCM (Single-phase 220 V Speed Control Type) | 5 ～ 180 | For Incline · Green | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | With Meandering Prevention Crosspiece | Belt with meandering prevention crosspieces | 6 | SCM (Single-phase 220 V Speed Control Type) | 5 ～ 180 | For Sliding · White | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | With Meandering Prevention Crosspiece | Belt with meandering prevention crosspieces | 6 | SCM (Single-phase 220 V Speed Control Type) | 5 ～ 180 | For Sliding · Green | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | With Meandering Prevention Crosspiece | Belt with meandering prevention crosspieces | 6 | SCM (Single-phase 220 V Speed Control Type) | 5 ～ 180 | General Use · Red PVC | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | With Meandering Prevention Crosspiece | Belt with meandering prevention crosspieces | 6 | SCM (Single-phase 220 V Speed Control Type) | 5 ～ 180 | General Use · White | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | With Meandering Prevention Crosspiece | Belt with meandering prevention crosspieces | 6 | SCM (Single-phase 220 V Speed Control Type) | 5 ～ 180 | General Use · Yellow PVC | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | With Meandering Prevention Crosspiece | Belt with meandering prevention crosspieces | 25 ～ 40 | INV (Three-phase 220 V Inverter Type) / SCM (Single-phase 220 V Speed Control Type) / NM (No Motor) | NH (Gearless Head) | For Anti-Static Use · Black | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | With Meandering Prevention Crosspiece | Belt with meandering prevention crosspieces | 25 ～ 40 | INV (Three-phase 220 V Inverter Type) / SCM (Single-phase 220 V Speed Control Type) / NM (No Motor) | NH (Gearless Head) | For Food Conveyance · White | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | With Meandering Prevention Crosspiece | Belt with meandering prevention crosspieces | 25 ～ 40 | INV (Three-phase 220 V Inverter Type) / SCM (Single-phase 220 V Speed Control Type) / NM (No Motor) | NH (Gearless Head) | General Use · Green | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | With Meandering Prevention Crosspiece | Belt with meandering prevention crosspieces | 25 ～ 40 | INV (Three-phase 220 V Inverter Type) / SCM (Single-phase 220 V Speed Control Type) / NM (No Motor) | NH (Gearless Head) | No belt | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | With Meandering Prevention Crosspiece | Belt with meandering prevention crosspieces | 25 ～ 40 | INV (Three-phase 220 V Inverter Type) / SCM (Single-phase 220 V Speed Control Type) / NM (No Motor) | NH (Gearless Head) | Oil-resistant Specification · Green | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | With Meandering Prevention Crosspiece | Belt with meandering prevention crosspieces | 25 ～ 40 | INV (Three-phase 220 V Inverter Type) / SCM (Single-phase 220 V Speed Control Type) / NM (No Motor) | NH (Gearless Head) | For Incline · Green | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | With Meandering Prevention Crosspiece | Belt with meandering prevention crosspieces | 25 ～ 40 | INV (Three-phase 220 V Inverter Type) / SCM (Single-phase 220 V Speed Control Type) / NM (No Motor) | NH (Gearless Head) | For Sliding · White | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | With Meandering Prevention Crosspiece | Belt with meandering prevention crosspieces | 25 ～ 40 | INV (Three-phase 220 V Inverter Type) / SCM (Single-phase 220 V Speed Control Type) / NM (No Motor) | NH (Gearless Head) | For Sliding · Green | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | With Meandering Prevention Crosspiece | Belt with meandering prevention crosspieces | 25 ～ 40 | INV (Three-phase 220 V Inverter Type) / SCM (Single-phase 220 V Speed Control Type) / NM (No Motor) | NH (Gearless Head) | General Use · Red PVC | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | With Meandering Prevention Crosspiece | Belt with meandering prevention crosspieces | 25 ～ 40 | INV (Three-phase 220 V Inverter Type) / SCM (Single-phase 220 V Speed Control Type) / NM (No Motor) | NH (Gearless Head) | General Use · White | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | With Meandering Prevention Crosspiece | Belt with meandering prevention crosspieces | 25 ～ 40 | INV (Three-phase 220 V Inverter Type) / SCM (Single-phase 220 V Speed Control Type) / NM (No Motor) | NH (Gearless Head) | General Use · Yellow PVC | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | With Meandering Prevention Crosspiece | Belt with meandering prevention crosspieces | 25 ～ 40 | INV (Three-phase 220 V Inverter Type) / SCM (Single-phase 220 V Speed Control Type) | 5 ～ 180 | For Anti-Static Use · Black | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | With Meandering Prevention Crosspiece | Belt with meandering prevention crosspieces | 25 ～ 40 | INV (Three-phase 220 V Inverter Type) / SCM (Single-phase 220 V Speed Control Type) | 5 ～ 180 | For Food Conveyance · White | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | With Meandering Prevention Crosspiece | Belt with meandering prevention crosspieces | 25 ～ 40 | INV (Three-phase 220 V Inverter Type) / SCM (Single-phase 220 V Speed Control Type) | 5 ～ 180 | General Use · Green | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | With Meandering Prevention Crosspiece | Belt with meandering prevention crosspieces | 25 ～ 40 | INV (Three-phase 220 V Inverter Type) / SCM (Single-phase 220 V Speed Control Type) | 5 ～ 180 | No belt | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | With Meandering Prevention Crosspiece | Belt with meandering prevention crosspieces | 25 ～ 40 | INV (Three-phase 220 V Inverter Type) / SCM (Single-phase 220 V Speed Control Type) | 5 ～ 180 | Oil-resistant Specification · Green | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | With Meandering Prevention Crosspiece | Belt with meandering prevention crosspieces | 25 ～ 40 | INV (Three-phase 220 V Inverter Type) / SCM (Single-phase 220 V Speed Control Type) | 5 ～ 180 | For Incline · Green | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | With Meandering Prevention Crosspiece | Belt with meandering prevention crosspieces | 25 ～ 40 | INV (Three-phase 220 V Inverter Type) / SCM (Single-phase 220 V Speed Control Type) | 5 ～ 180 | For Sliding · White | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | With Meandering Prevention Crosspiece | Belt with meandering prevention crosspieces | 25 ～ 40 | INV (Three-phase 220 V Inverter Type) / SCM (Single-phase 220 V Speed Control Type) | 5 ～ 180 | For Sliding · Green | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 15 Day(s) | 390 ～ 3000 | 50 ～ 250 | With Meandering Prevention Crosspiece | Belt with meandering prevention crosspieces | 25 ～ 40 | INV (Three-phase 220 V Inverter Type) / SCM (Single-phase 220 V Speed Control Type) | 5 ～ 180 | General Use · Red PVC | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) |
Loading...
Basic Information
| Drive Module Position | Head Drive | Belt Type | Flat Belt | Tail Roller Dia. D (Tail Transfer Part R)(mm) | 30 |
|---|---|---|---|---|---|
| Drive Roller Dia.(mm) | 30 |
Specification/Dimensions
-
Conveyance Length
-
Belt Width/Belt Pitch B(mm)
-
Meandering Prevention
-
With Meandering Prevention Crosspiece -
Pulley crowned for meandering prevention
-
-
Type
- Belt with meandering prevention crosspieces
- Crowned roller for meandering prevention
-
Output Power (W)
-
Specifications
- INV (Three-phase 220 V Inverter Type)
- SCM (Single-phase 220 V Speed Control Type)
- NM (No Motor)
-
Gear Head Reduction Ratio
-
Belt Specifications
-
Motor
- G (GPG Motor)
- J (JSCC Motor)
- R (No Motor · Gear Head)
-
type
- E-SVKA
- E-SVKB
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 15 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Frequently asked question (FAQ)
- Question: Can the conveyor's operating direction be set to reverse?
- Answer: The current conveyor does not support reverse operation. If reverse operation is required, please contact customer service for customization.
- Question: Conveyor belt deviation is a product characteristic. How can the frequency of deviation be reduced?
- Answer: The main methods to prevent conveyor belt deviation are arc-shaped rollers and belts with guide strips. Curved rollers are suitable for lengths up to 2000 mm; belts with guide strips are suitable for long distances over 2000 mm.
- Question: If the existing standard models cannot meet your requirements and you need to modify the model but are concerned about debugging issues, do you have any good suggestions?
- Answer: For this situation, please contact customer service for customization to meet your individual needs.
- Question: If I need a stepper motor or a servo motor, can you provide them?
- Answer: You can select a conveyor model without a motor or speed controller and purchase a motor separately for assembly.
Additional Products in this Category
- Flat Belt Conveyors - With Meandering Prevention Crosspiece, Head Drive, 2-Groove Frame
- Timing Belt Conveyors - Dual Track, Head Drive, 2-Groove Frame
- Belt Conveyor Mini III Head Drive Standard Type Belt Conveyor DHH
- Belt Conveyor Mini III, Belt Type Conveyor With Frieze Rail
- Belt Conveyor Mini III Short Machine Length Type Belt Conveyor
- Belt Conveyor Mini Ultra-Compact Belt Conveyor, Center Drive, Non-Wandering
- Belgotch MODEL34 Standard Model
- Belcon Mini III Short Machine Length Roller Edge Type for Transferring Small Items Between Conveyors DMJR
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy