(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Webcode Seach | Series
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

Loading

  • [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

  • How can we improve?

    How can we improve?

    Comments
    Name (Optional)
    E-mail Address (Optional)
    Tel (Optional)

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Customer Privacy Policy

    Thank you for your cooperation.

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Please use the inquiry form.

    Customer Privacy Policy

Square Rack, Pressure Angle 20°, Length Configurable (Part Numbers)

Square Rack, Pressure Angle 20°, Length Configurable

MISUMI

MiSUMi Economy

MISUMI

Part Number

Configured Part Number is shown.

 
Product Overview
 
Rack is often used together with gears and is a type of mechanical component used for transmission. Allows rotational displacement to be transmitted linearly, and linear displacement to be transmitted rotationally.
Gear rack drive mechanisms can be used in elevators, rail systems, automotive steering systems, machine tools, and actuator feed mechanisms, among other fields.
 
Dimensional Drawing
 
■ Hole position configurable■ Number of holes configurable
Dimensional DrawingDimensional Drawing
 
Dimensional DrawingMetal: L size tolerance (mm)Accuracy: Cumulative Pitch Error (Unit: µm)
ModuleP Tolerance
0.5 to 2.0-0.1
-0.3
2.5 to 3.0-0.1
-0.4
ModuleL tolerance
0.5 to 2.0-0.2 to -0.6
2.5 to 3.0-0.2 to -0.8
ModuleNominal model
1003005001000
0.5 to 1.554(76)65(92)72(101)100(117)
2.0 to 3.062(86)73(102)80(112)91(128)
( ) indicates the corresponding dimensions for E-RGSASL and E-LRGSAS
 
Material Table
 
TypeMaterialSurface Treatment
Designated hole position typeDesignated number of holes type
E-RGSALE-LRGSASteelBlack Oxide Film
E-RGSASLE-LRGSASStainless Steel-
This product series is processed on one end only. Please pay attention when selecting.
The cut surface and hole-machined surface are not surface treated. Please note.
This series of products is not heat treated. If needed, please select the high-frequency quenching series products.
If rust prevention is required, please prioritize stainless steel products. For details, please refer to Rust Prevention Performance and Maintenance of Metal Materials and Their Surface Treatments.
For the electronic catalog, please click here to get it
 
Alteration
 
AlterationsAdditional female thread machining on one end faceAdditional female thread machining on both ends
CodeMCWMC
Spec.Alteration optionsAlteration options
 
Specification Table
 
● Specification Table
● Hole Position Specification Type
Part NumberOverall length L
can be specified down to 1 mm increments		Hole position
ABCD
can be specified down to 1 mm increments		P
(Pitch)		WHhM
(Coarse Thread)		d1d2Z1
TypeModuleHole machining
E-RGSAL
E-RGSASL		1.0N(No hole machining)
HT(Back side threaded hole)
ST(Side threaded hole)
Z(Side counterbore)		20 to 9805 to 9753.14217
(10)		17
(10)		16
(9)		M33.56.5
(6)		3.5
1.54.71217
(15)		17
(15)		15.5
(13.5)		M44.584.5
2.06 to 9746.28324
(20)		24
(20)		22
(18)		M55.59.55.5
2.57.85424
(25)		24
(25)		21.5
(22.5)		M55.59.55.5
3.09.42529
(30)		29
(30)		26
(27)		M55.59.55.5
For stainless steel material, please refer to the dimensions in ( )

● Designated number of holes type
Part NumberTotal Length L
Specify 1 mm		K
(Number of Holes)		Hole Pitch B
can be specified down to 1 mm increments		P
(Pitch)		WHhM
(Coarse Thread)		d1d2Z1
TypeModuleHole machining
E-LRGSA
E-LRGSAS		1.0HT(Back Threaded Hole)
ST(Side Threaded Hole)
Z(Side Counterbore)		20 to 9802 to 1250 to 5003.14217
(10)		17
(10)		16
(9)		M33.56.5
(6)		3.5
1.54.71217
(15)		17
(15)		15.5
(13.5)		M44.584.5
2.06.28324
(20)		24
(20)		22
(18)		M55.59.55.5
2.57.85424
(25)		24
(25)		21.5
(22.5)		M55.59.55.5
3.09.42529
(30)		29
(30)		26
(27)		M55.59.55.5
This product series is processed on one end only. Please pay attention when selecting.
For stainless steel material, please refer to the dimensions in parentheses.
 
Product Features
 
Feature 1: Can be converted between rotary motion and linear motion.
Feature 2: Length and mounting hole processing method can be specified.
Feature 3: You can choose between standard steel and stainless steel racks according to actual operating requirements.
Feature 4: The hole machining method can be freely selected: no hole machining, back side tapped hole machining, side counterbore machining, or side tapped hole machining.
Feature 5: Optimized cross-sectional shape, better suited for domestic usage environments
 
Usage Method
 
■ Linear Motion: Rack and Pinion Drive
Bracket Micro Gear Type Slide Table Assembly
Case 1: Linear Motion Using Gear and Rack Drive
Positioning Mechanism for Basic Frame
Case 2: Linear Motion Using Gear and Rack Drive
 
Precautions
 
■ Cutting Method for Rack End Face
Screenshot of Rack End Face Cutting Method
Cut according to the length of the effective number of teeth (tooth root)Cut from the reference surface to the specified length, excluding the teeth.

■ Rack Connection Method
The end face machining accuracy of MISUMI racks is less than the pitch.
Therefore, please leave a gap between the two racks as shown in the diagram below, and connect them after adjusting the pitch using a combination rack (racks with the same module).
Rack Connection Method Instructions
 
Example of Use
 
Reference Cases for Gear and Rack Combination
Equipment Name: n-speed Mechanism
Feature 1:The use of fixed and movable racks in combination with large and small gears doubles the cylinder stroke distance.
Feature 2:After setting the ratio of the small gear to the large gear to 1:n, the stroke can be converted to n times.
Feature 3:By placing the moving base side gear on the centerline of the cylinder and symmetrically arranging the fixed rack side gears on both sides, force deviation can be eliminated.
Feature 4:Install the lower rack (custom-sized holes) or add/remove shims to adjust the position of the rack and pinion.

For more information, please click n-times speed mechanism
Application Industries
 
Food Semiconductor Smart phone
It is widely used in food transport and transfer Industry Application Industry Semiconductor Smartphone 3C IPHONE Huawei
Medical Electronic & Electrical Appliances Lithium battery
Widely used in medical equipment, blood machines and other related equipment in the biomedical industry Method of usage in electronic & electrical and home appliances industry Application industry Lithium battery
 
Related Products
 
Economy Spur Gear Pressure Angle 20° Module 1.5Economy Spur Gear Pressure Angle 20° Module 2.0Economy Type Rack, High-Frequency Quenching / Square Cross-Section / L Dimension Specified / Pressure Angle 20°
Related Products-Related Products-Page under construction
 
Related Documents
 
For related information on gears, please refer to Gear Technical Information
For information on metal materials and their surface treatment, please refer to Rust Prevention and Maintenance of Metal Materials and Their Surface Treatment

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...

CAD Download

30
60
90
  1. 1
Part Number
E-LRGSA1.0-HT-[20-980/1]-K[2,​3,​4,​5,​6,​7,​8,​9,​10,​11,​12]-B[50-500/1]
E-LRGSA1.0-ST-[20-980/1]-K[2,​3,​4,​5,​6,​7,​8,​9,​10,​11,​12]-B[50-500/1]
E-LRGSA1.0-Z-[20-980/1]-K[2,​3,​4,​5,​6,​7,​8,​9,​10,​11,​12]-B[50-500/1]
E-LRGSA1.5-HT-[20-980/1]-K[2,​3,​4,​5,​6,​7,​8,​9,​10,​11,​12]-B[50-500/1]
E-LRGSA1.5-ST-[20-980/1]-K[2,​3,​4,​5,​6,​7,​8,​9,​10,​11,​12]-B[50-500/1]
E-LRGSA1.5-Z-[20-980/1]-K[2,​3,​4,​5,​6,​7,​8,​9,​10,​11,​12]-B[50-500/1]
E-LRGSA2.0-HT-[20-980/1]-K[2,​3,​4,​5,​6,​7,​8,​9,​10,​11,​12]-B[50-500/1]
E-LRGSA2.0-ST-[20-980/1]-K[2,​3,​4,​5,​6,​7,​8,​9,​10,​11,​12]-B[50-500/1]
E-LRGSA2.0-Z-[20-980/1]-K[2,​3,​4,​5,​6,​7,​8,​9,​10,​11,​12]-B[50-500/1]
E-LRGSA2.5-HT-[20-980/1]-K[2,​3,​4,​5,​6,​7,​8,​9,​10,​11,​12]-B[50-500/1]
E-LRGSA2.5-ST-[20-980/1]-K[2,​3,​4,​5,​6,​7,​8,​9,​10,​11,​12]-B[50-500/1]
E-LRGSA2.5-Z-[20-980/1]-K[2,​3,​4,​5,​6,​7,​8,​9,​10,​11,​12]-B[50-500/1]
E-LRGSA3.0-HT-[20-980/1]-K[2,​3,​4,​5,​6,​7,​8,​9,​10,​11,​12]-B[50-500/1]
E-LRGSA3.0-ST-[20-980/1]-K[2,​3,​4,​5,​6,​7,​8,​9,​10,​11,​12]-B[50-500/1]
E-LRGSA3.0-Z-[20-980/1]-K[2,​3,​4,​5,​6,​7,​8,​9,​10,​11,​12]-B[50-500/1]
E-LRGSAS1.0-HT-[20-980/1]-K[2,​3,​4,​5,​6,​7,​8,​9,​10,​11,​12]-B[50-500/1]
E-LRGSAS1.0-ST-[20-980/1]-K[2,​3,​4,​5,​6,​7,​8,​9,​10,​11,​12]-B[50-500/1]
E-LRGSAS1.0-Z-[20-980/1]-K[2,​3,​4,​5,​6,​7,​8,​9,​10,​11,​12]-B[50-500/1]
E-LRGSAS1.5-HT-[20-980/1]-K[2,​3,​4,​5,​6,​7,​8,​9,​10,​11,​12]-B[50-500/1]
E-LRGSAS1.5-ST-[20-980/1]-K[2,​3,​4,​5,​6,​7,​8,​9,​10,​11,​12]-B[50-500/1]
E-LRGSAS1.5-Z-[20-980/1]-K[2,​3,​4,​5,​6,​7,​8,​9,​10,​11,​12]-B[50-500/1]
E-LRGSAS2.0-HT-[20-980/1]-K[2,​3,​4,​5,​6,​7,​8,​9,​10,​11,​12]-B[50-500/1]
E-LRGSAS2.0-ST-[20-980/1]-K[2,​3,​4,​5,​6,​7,​8,​9,​10,​11,​12]-B[50-500/1]
E-LRGSAS2.0-Z-[20-980/1]-K[2,​3,​4,​5,​6,​7,​8,​9,​10,​11,​12]-B[50-500/1]
E-LRGSAS2.5-HT-[20-980/1]-K[2,​3,​4,​5,​6,​7,​8,​9,​10,​11,​12]-B[50-500/1]
E-LRGSAS2.5-ST-[20-980/1]-K[2,​3,​4,​5,​6,​7,​8,​9,​10,​11,​12]-B[50-500/1]
E-LRGSAS2.5-Z-[20-980/1]-K[2,​3,​4,​5,​6,​7,​8,​9,​10,​11,​12]-B[50-500/1]
E-LRGSAS3.0-HT-[20-980/1]-K[2,​3,​4,​5,​6,​7,​8,​9,​10,​11,​12]-B[50-500/1]
E-LRGSAS3.0-ST-[20-980/1]-K[2,​3,​4,​5,​6,​7,​8,​9,​10,​11,​12]-B[50-500/1]
E-LRGSAS3.0-Z-[20-980/1]-K[2,​3,​4,​5,​6,​7,​8,​9,​10,​11,​12]-B[50-500/1]
E-RGSAL1.0-HT-[20-980/1]-A[5-975/1]
E-RGSAL1.0-N-[20-980/1]
E-RGSAL1.0-ST-[20-980/1]-A[5-975/1]
E-RGSAL1.0-Z-[20-980/1]-A[5-975/1]
E-RGSAL1.5-HT-[20-980/1]-A[5-975/1]
E-RGSAL1.5-N-[20-980/1]
E-RGSAL1.5-ST-[20-980/1]-A[5-975/1]
E-RGSAL1.5-Z-[20-980/1]-A[5-975/1]
E-RGSAL2.0-HT-[20-980/1]-A[6-974/1]
E-RGSAL2.0-N-[20-980/1]
E-RGSAL2.0-ST-[20-980/1]-A[6-974/1]
E-RGSAL2.0-Z-[20-980/1]-A[6-974/1]
E-RGSAL2.5-HT-[20-980/1]-A[6-974/1]
E-RGSAL2.5-N-[20-980/1]
E-RGSAL2.5-ST-[20-980/1]-A[6-974/1]
E-RGSAL2.5-Z-[20-980/1]-A[6-974/1]
E-RGSAL3.0-HT-[20-980/1]-A[6-974/1]
E-RGSAL3.0-N-[20-980/1]
E-RGSAL3.0-ST-[20-980/1]-A[6-974/1]
E-RGSAL3.0-Z-[20-980/1]-A[6-974/1]
E-RGSASL1.0-HT-[20-980/1]-A[5-975/1]
E-RGSASL1.0-N-[20-980/1]
E-RGSASL1.0-ST-[20-980/1]-A[5-975/1]
E-RGSASL1.0-Z-[20-980/1]-A[5-975/1]
E-RGSASL1.5-HT-[20-980/1]-A[5-975/1]
E-RGSASL1.5-N-[20-980/1]
E-RGSASL1.5-ST-[20-980/1]-A[5-975/1]
E-RGSASL1.5-Z-[20-980/1]-A[5-975/1]
E-RGSASL2.0-HT-[20-980/1]-A[6-974/1]
E-RGSASL2.0-N-[20-980/1]
E-RGSASL2.0-ST-[20-980/1]-A[6-974/1]
E-RGSASL2.0-Z-[20-980/1]-A[6-974/1]
E-RGSASL2.5-HT-[20-980/1]-A[6-974/1]
E-RGSASL2.5-N-[20-980/1]
E-RGSASL2.5-ST-[20-980/1]-A[6-974/1]
E-RGSASL2.5-Z-[20-980/1]-A[6-974/1]
E-RGSASL3.0-HT-[20-980/1]-A[6-974/1]
E-RGSASL3.0-N-[20-980/1]
E-RGSASL3.0-ST-[20-980/1]-A[6-974/1]
E-RGSASL3.0-Z-[20-980/1]-A[6-974/1]
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipTotal Length L
(mm) 		Module Tooth Width W
(mm) 		Surface Treatment Rack Height
(mm) 		Hole machining Style Hole Position (1st) [ A ]
(mm) 		Number of Holes [K] Hole Position [B]
(mm)

-

1 Piece(s) 14 Day(s) 20 ～ 980117Black Oxide Coating17HT (Reverse Threaded Hole)Designated number of holes type-2 ～ 1250 ～ 500

-

1 Piece(s) 14 Day(s) 20 ～ 980117Black Oxide Coating17ST (Side Threaded Hole)Designated number of holes type-2 ～ 1250 ～ 500

-

1 Piece(s) 14 Day(s) 20 ～ 980117Black Oxide Coating17Z (Side Counterbore)Designated number of holes type-2 ～ 1250 ～ 500

-

1 Piece(s) 14 Day(s) 20 ～ 9801.517Black Oxide Coating17HT (Reverse Threaded Hole)Designated number of holes type-2 ～ 1250 ～ 500

-

1 Piece(s) 14 Day(s) 20 ～ 9801.517Black Oxide Coating17ST (Side Threaded Hole)Designated number of holes type-2 ～ 1250 ～ 500

-

1 Piece(s) 14 Day(s) 20 ～ 9801.517Black Oxide Coating17Z (Side Counterbore)Designated number of holes type-2 ～ 1250 ～ 500

-

1 Piece(s) 14 Day(s) 20 ～ 980224Black Oxide Coating24HT (Reverse Threaded Hole)Designated number of holes type-2 ～ 1250 ～ 500

-

1 Piece(s) 14 Day(s) 20 ～ 980224Black Oxide Coating24ST (Side Threaded Hole)Designated number of holes type-2 ～ 1250 ～ 500

-

1 Piece(s) 14 Day(s) 20 ～ 980224Black Oxide Coating24Z (Side Counterbore)Designated number of holes type-2 ～ 1250 ～ 500

-

1 Piece(s) 14 Day(s) 20 ～ 9802.524Black Oxide Coating24HT (Reverse Threaded Hole)Designated number of holes type-2 ～ 1250 ～ 500

-

1 Piece(s) 14 Day(s) 20 ～ 9802.524Black Oxide Coating24ST (Side Threaded Hole)Designated number of holes type-2 ～ 1250 ～ 500

-

1 Piece(s) 14 Day(s) 20 ～ 9802.524Black Oxide Coating24Z (Side Counterbore)Designated number of holes type-2 ～ 1250 ～ 500

-

1 Piece(s) 14 Day(s) 20 ～ 980329Black Oxide Coating29HT (Reverse Threaded Hole)Designated number of holes type-2 ～ 1250 ～ 500

-

1 Piece(s) 14 Day(s) 20 ～ 980329Black Oxide Coating29ST (Side Threaded Hole)Designated number of holes type-2 ～ 1250 ～ 500

-

1 Piece(s) 14 Day(s) 20 ～ 980329Black Oxide Coating29Z (Side Counterbore)Designated number of holes type-2 ～ 1250 ～ 500

-

1 Piece(s) 14 Day(s) 20 ～ 980110Not Provided10HT (Reverse Threaded Hole)Designated number of holes type-2 ～ 1250 ～ 500

-

1 Piece(s) 14 Day(s) 20 ～ 980110Not Provided10ST (Side Threaded Hole)Designated number of holes type-2 ～ 1250 ～ 500

-

1 Piece(s) 14 Day(s) 20 ～ 980110Not Provided10Z (Side Counterbore)Designated number of holes type-2 ～ 1250 ～ 500

-

1 Piece(s) 14 Day(s) 20 ～ 9801.515Not Provided15HT (Reverse Threaded Hole)Designated number of holes type-2 ～ 1250 ～ 500

-

1 Piece(s) 14 Day(s) 20 ～ 9801.515Not Provided15ST (Side Threaded Hole)Designated number of holes type-2 ～ 1250 ～ 500

-

1 Piece(s) 14 Day(s) 20 ～ 9801.515Not Provided15Z (Side Counterbore)Designated number of holes type-2 ～ 1250 ～ 500

-

1 Piece(s) 14 Day(s) 20 ～ 980220Not Provided20HT (Reverse Threaded Hole)Designated number of holes type-2 ～ 1250 ～ 500

-

1 Piece(s) 14 Day(s) 20 ～ 980220Not Provided20ST (Side Threaded Hole)Designated number of holes type-2 ～ 1250 ～ 500

-

1 Piece(s) 14 Day(s) 20 ～ 980220Not Provided20Z (Side Counterbore)Designated number of holes type-2 ～ 1250 ～ 500

-

1 Piece(s) 14 Day(s) 20 ～ 9802.525Not Provided25HT (Reverse Threaded Hole)Designated number of holes type-2 ～ 1250 ～ 500

-

1 Piece(s) 14 Day(s) 20 ～ 9802.525Not Provided25ST (Side Threaded Hole)Designated number of holes type-2 ～ 1250 ～ 500

-

1 Piece(s) 14 Day(s) 20 ～ 9802.525Not Provided25Z (Side Counterbore)Designated number of holes type-2 ～ 1250 ～ 500

-

1 Piece(s) 14 Day(s) 20 ～ 980330Not Provided30HT (Reverse Threaded Hole)Designated number of holes type-2 ～ 1250 ～ 500

-

1 Piece(s) 14 Day(s) 20 ～ 980330Not Provided30ST (Side Threaded Hole)Designated number of holes type-2 ～ 1250 ～ 500

-

1 Piece(s) 14 Day(s) 20 ～ 980330Not Provided30Z (Side Counterbore)Designated number of holes type-2 ～ 1250 ～ 500

-

1 Piece(s) 14 Day(s) 20 ～ 980117Black Oxide Coating17HT (Reverse Threaded Hole)Designated hole position type5 ～ 975--

-

1 Piece(s) 14 Day(s) 20 ～ 980117Black Oxide Coating17N (No Hole Machining)Designated hole position type---

-

1 Piece(s) 14 Day(s) 20 ～ 980117Black Oxide Coating17ST (Side Threaded Hole)Designated hole position type5 ～ 975--

-

1 Piece(s) 14 Day(s) 20 ～ 980117Black Oxide Coating17Z (Side Counterbore)Designated hole position type5 ～ 975--

-

1 Piece(s) 14 Day(s) 20 ～ 9801.517Black Oxide Coating17HT (Reverse Threaded Hole)Designated hole position type5 ～ 975--

-

1 Piece(s) 14 Day(s) 20 ～ 9801.517Black Oxide Coating17N (No Hole Machining)Designated hole position type---

-

1 Piece(s) 14 Day(s) 20 ～ 9801.517Black Oxide Coating17ST (Side Threaded Hole)Designated hole position type5 ～ 975--

-

1 Piece(s) 14 Day(s) 20 ～ 9801.517Black Oxide Coating17Z (Side Counterbore)Designated hole position type5 ～ 975--

-

1 Piece(s) 14 Day(s) 20 ～ 980224Black Oxide Coating24HT (Reverse Threaded Hole)Designated hole position type6 ～ 974--

-

1 Piece(s) 14 Day(s) 20 ～ 980224Black Oxide Coating24N (No Hole Machining)Designated hole position type---

-

1 Piece(s) 14 Day(s) 20 ～ 980224Black Oxide Coating24ST (Side Threaded Hole)Designated hole position type6 ～ 974--

-

1 Piece(s) 14 Day(s) 20 ～ 980224Black Oxide Coating24Z (Side Counterbore)Designated hole position type6 ～ 974--

-

1 Piece(s) 14 Day(s) 20 ～ 9802.524Black Oxide Coating24HT (Reverse Threaded Hole)Designated hole position type6 ～ 974--

-

1 Piece(s) 14 Day(s) 20 ～ 9802.524Black Oxide Coating24N (No Hole Machining)Designated hole position type---

-

1 Piece(s) 14 Day(s) 20 ～ 9802.524Black Oxide Coating24ST (Side Threaded Hole)Designated hole position type6 ～ 974--

-

1 Piece(s) 14 Day(s) 20 ～ 9802.524Black Oxide Coating24Z (Side Counterbore)Designated hole position type6 ～ 974--

-

1 Piece(s) 14 Day(s) 20 ～ 980329Black Oxide Coating29HT (Reverse Threaded Hole)Designated hole position type6 ～ 974--

-

1 Piece(s) 14 Day(s) 20 ～ 980329Black Oxide Coating29N (No Hole Machining)Designated hole position type---

-

1 Piece(s) 14 Day(s) 20 ～ 980329Black Oxide Coating29ST (Side Threaded Hole)Designated hole position type6 ～ 974--

-

1 Piece(s) 14 Day(s) 20 ～ 980329Black Oxide Coating29Z (Side Counterbore)Designated hole position type6 ～ 974--

-

1 Piece(s) 14 Day(s) 20 ～ 980110Not Provided10HT (Reverse Threaded Hole)Designated hole position type5 ～ 975--

-

1 Piece(s) 14 Day(s) 20 ～ 980110Not Provided10N (No Hole Machining)Designated hole position type---

-

1 Piece(s) 14 Day(s) 20 ～ 980110Not Provided10ST (Side Threaded Hole)Designated hole position type5 ～ 975--

-

1 Piece(s) 14 Day(s) 20 ～ 980110Not Provided10Z (Side Counterbore)Designated hole position type5 ～ 975--

-

1 Piece(s) 14 Day(s) 20 ～ 9801.515Not Provided15HT (Reverse Threaded Hole)Designated hole position type5 ～ 975--

-

1 Piece(s) 14 Day(s) 20 ～ 9801.515Not Provided15N (No Hole Machining)Designated hole position type---

-

1 Piece(s) 14 Day(s) 20 ～ 9801.515Not Provided15ST (Side Threaded Hole)Designated hole position type5 ～ 975--

-

1 Piece(s) 14 Day(s) 20 ～ 9801.515Not Provided15Z (Side Counterbore)Designated hole position type5 ～ 975--

-

1 Piece(s) 14 Day(s) 20 ～ 980220Not Provided20HT (Reverse Threaded Hole)Designated hole position type6 ～ 974--

-

1 Piece(s) 14 Day(s) 20 ～ 980220Not Provided20N (No Hole Machining)Designated hole position type---

-

1 Piece(s) 14 Day(s) 20 ～ 980220Not Provided20ST (Side Threaded Hole)Designated hole position type6 ～ 974--

-

1 Piece(s) 14 Day(s) 20 ～ 980220Not Provided20Z (Side Counterbore)Designated hole position type6 ～ 974--

-

1 Piece(s) 14 Day(s) 20 ～ 9802.525Not Provided25HT (Reverse Threaded Hole)Designated hole position type6 ～ 974--

-

1 Piece(s) 14 Day(s) 20 ～ 9802.525Not Provided25N (No Hole Machining)Designated hole position type---

-

1 Piece(s) 14 Day(s) 20 ～ 9802.525Not Provided25ST (Side Threaded Hole)Designated hole position type6 ～ 974--

-

1 Piece(s) 14 Day(s) 20 ～ 9802.525Not Provided25Z (Side Counterbore)Designated hole position type6 ～ 974--

-

1 Piece(s) 14 Day(s) 20 ～ 980330Not Provided30HT (Reverse Threaded Hole)Designated hole position type6 ～ 974--

-

1 Piece(s) 14 Day(s) 20 ～ 980330Not Provided30N (No Hole Machining)Designated hole position type---

-

1 Piece(s) 14 Day(s) 20 ～ 980330Not Provided30ST (Side Threaded Hole)Designated hole position type6 ～ 974--

-

1 Piece(s) 14 Day(s) 20 ～ 980330Not Provided30Z (Side Counterbore)Designated hole position type6 ～ 974--

Loading...

  1. 1

Basic Information

Shape Rack End Machining One End Machined

Configure

Clear All

70 Part Numbers

View Part Numbers

Configure Remaining Specifications
Completed
loading

Specification/Dimensions

  • Total Length L(mm)

     [20-980/1mm Unit(s)]

    Clear

  • Module

    • 1
    • 1.5
    • 2
    • 2.5
    • 3

    Clear

  • Tooth Width W(mm)

    • 10
    • 15
    • 17
    • 20
    • 24
    • 25
    • 29
    • 30

    Clear

  • Surface Treatment

    • Not Provided
    • Black Oxide Coating

    Clear

  • Hole machining

    • HT (Reverse Threaded Hole)
    • N (No Hole Machining)
    • ST (Side Threaded Hole)
    • Z (Side Counterbore)

    Clear

  • Style

    • Designated hole position type
    • Designated number of holes type

    Clear

  • Hole Position (1st) [ A ](mm)

     [5-975/1mm Unit(s)]

    Clear

  • Number of Holes [K]

    • 2
    • 3
    • 4
    • 5
    • 6
    • 7
    • 8
    • 9
    • 10
    • 11
    • 12

    Clear

  • Hole Position [B](mm)

     [50-500/1mm Unit(s)]

    Clear

  • CAD

    • 2D
    • 3D

    Clear

Days to Ship

    • All
    • 14 Day(s) or Less

    Clear

Specify Alterations

Additional Products in this Category

Tech Support

Technical Inquiry

Payment Method

more
  • Credit Card
    • VISA
    • MasterCard
  • Bank Transfer
    • FPX
    • Interbank GIRO (IBG)

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm,    9am – 1pm(Sat) * Order cut-off time is 12pm

  • Tel: (60) 3 7890 6399
Inquiry
Mobile View

Copyright © MISUMI Corporation All Rights Reserved.