(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Proximity Sensor, Tantalum Capacitor (Ultra-High Speed), Cylinder type (E-MSMC12-P01-H)
- Volume Discount
This is an economy item, The price is cheaper than the MISUMI standard product.
Part Number
Configured Part Number is shown.
E-MSMC12-P01-H
Product Overview
Most market products use aluminum capacitors with an application frequency of 1 Hz to 5KHz. The actual detection frequency is much lower than 50 Hz, which cannot meet the requirements for high-speed detection.
The economical tantalum capacitor type high-speed proximity sensor uses a tantalum capacitor (MnO2), with an application frequency range of 1 Hz to 1 GHz, meeting the high-speed detection requirement of a maximum actual workpiece detection frequency of 120 Hz.
Figure 1. Tantalum Capacitor Structure
Figure 2 Impedance of Aluminum Capacitor and Tantalum Capacitor at 100µF
The economical tantalum capacitor type high-speed proximity sensor uses a tantalum capacitor (MnO2), with an application frequency range of 1 Hz to 1 GHz, meeting the high-speed detection requirement of a maximum actual workpiece detection frequency of 120 Hz.
Advantages of using tantalum capacitors:
1. High-frequency response: Tantalum capacitors usually have excellent high-frequency response. They can handle frequencies above 100 Hz.
2. High stability: Tantalum capacitors can maintain excellent stability over a wide temperature range. Does not change with changes in ambient temperature.
3. Long lifespan, high precision: Tantalum capacitors have an extremely long lifespan. The typical lifespan of a tantalum capacitor is usually over 10 years.
4. High capacitance density: Tantalum capacitors have high density characteristics, allowing a very small capacitor to store a large amount of charge.
Disadvantages:
Compared to aluminum electrolytic capacitors, tantalum capacitors have a smaller capacity and are also more expensive.
1. High-frequency response: Tantalum capacitors usually have excellent high-frequency response. They can handle frequencies above 100 Hz.
2. High stability: Tantalum capacitors can maintain excellent stability over a wide temperature range. Does not change with changes in ambient temperature.
3. Long lifespan, high precision: Tantalum capacitors have an extremely long lifespan. The typical lifespan of a tantalum capacitor is usually over 10 years.
4. High capacitance density: Tantalum capacitors have high density characteristics, allowing a very small capacitor to store a large amount of charge.
Disadvantages:
Compared to aluminum electrolytic capacitors, tantalum capacitors have a smaller capacity and are also more expensive.
Figure 1. Tantalum Capacitor Structure
Figure 2 Impedance of Aluminum Capacitor and Tantalum Capacitor at 100µF
Dimensional Drawing
Specification Table
| Style | Shape | Detection Distance | Mounting Method | Output Method | Detection Frequency Hz | Wire Length | |
| E-MSMC12-N01-H | Threaded Type M12 |  | 1 to 3 mm (Adjustable distance) | Shielded | NPN N.O. | 120 (High Speed) | 2M |
| E-MSMC12-P01-H | PNP N.O. | ||||||
| E-MSMC12-N11-H | | 1 to 6 mm (Adjustable distance) | Non Shield | NPN N.O. | |||
| E-MSMC12-P11-H | PNP N.O. | ||||||
| E-MSMC18-N01-H | Threaded Type M18 | | 2–8 mm (Adjustable distance) | Shielded | NPN N.O. | ||
| E-MSMC18-P01-H | PNP N.O. | ||||||
| E-MSMC18-N11-H | | 2–15 mm (Adjustable distance) | Non Shield | NPN N.O. | |||
| E-MSMC18-P11-H | PNP N.O. | ||||||
Technical data
| Operating Voltage | 10 to 30 V DC |
| Permissible Pulse Voltage | < 10% |
| No-Load Current | < 10 mA |
| Maximum Load Current | 200 mA |
| Leakage Current | < 0.01 mA |
| Voltage Drop | < 2 V DC |
| Switching Frequency | 120HZ |
| Detection Object (mm) | Iron 50 × 50 × 1 t (grounded state) |
| Detection Material | Ferrous/Non-ferrous Metals/Non-metals (Detection distance varies depending on material) |
| Response Time | 1.5 ms |
| Switch Hysteresis | < 15%(Sr) |
| Repeatability | < 5%(Sr) |
| Protection Rating | IP67 |
| Operating Temperature | -25°C to +70°C |
| Temperature Drift | < 10%(Sr) |
| Short Circuit Protection | YES |
| Overload Current | 220 mA |
| Sensing Surface Material | PBT |
Capacitive Sensor Attenuation Coefficient
Product Features
Wide Variety
A rich selection of products suitable for various limit control, counting control, and more
Quality Assurance
IC control, high testing accuracy, and longer lifespan
Easy Installation
Suitable for high pulse and high rotation applications
Protection Rating
IP67 construction, offering certain oil resistance and waterproof functions
Protection Circuit
Surge protection circuit, short-circuit protection, and reverse polarity protection
Standard testing equipment, quality guaranteed
A rich selection of products suitable for various limit control, counting control, and more
Quality Assurance
IC control, high testing accuracy, and longer lifespan
Easy Installation
Suitable for high pulse and high rotation applications
Protection Rating
IP67 construction, offering certain oil resistance and waterproof functions
Protection Circuit
Surge protection circuit, short-circuit protection, and reverse polarity protection
DC 3-wire NPN Output
ZD: Surge Absorption Zener Diode
Tr: NPN Output Transistor
D: Reverse Power Supply Protection Diode
ZD: Surge Absorption Zener Diode
Tr: NPN Output Transistor
D: Reverse Power Supply Protection Diode
DC 3-wire PNP Output
ZD: Surge Absorption Zener Diode
Tr: PNP Output Transistor
D: Reverse Power Supply Protection Diode
ZD: Surge Absorption Zener Diode
Tr: PNP Output Transistor
D: Reverse Power Supply Protection Diode
Standard testing equipment, quality guaranteed
Usage Method
| Shielded Type | Non Shield Type | ||||||||||||||||||
 |  | ||||||||||||||||||
| Shielded type concentrated at the front of the sensor | The non shield type allows for a greater detection distance, but due to the lack of object protection, it is easily affected by surrounding workpieces. Please pay attention during installation. | ||||||||||||||||||
| Mounting Method | |||||||||||||||||||
| Single Shielded Type | Single Non Shield Type | ||||||||||||||||||
 |  | ||||||||||||||||||
| To prevent signal interference, the distance from the sensor surface to the detected object should be ≥ 3Sn (Sn: sensor sensing distance), and the distance between two adjacent proximity sensors should be ≥ D (D: sensor diameter). | No protection around the sensor; the sensing surface must maintain a distance of Y from the mounting surface. The distance between the sensing surface and the detected object should be ≥ 3Sn, and the distance between two adjacent proximity sensors should be ≥ 2D (D is the sensor diameter). | ||||||||||||||||||
| Relative Mounting Method |
| ||||||||||||||||||
 | |||||||||||||||||||
| For sensors installed opposite each other, the minimum distance between the two sensing surfaces must be ≥ 6Sn | |||||||||||||||||||
Example of Use
Liquid Level Detection
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Basic Information
| Shape | Cylinder Shape | Amplifier | Built-in Type | Protection Structure (IEC) | IP67 |
|---|---|---|---|---|---|
| Detected Object | Nonmagnetic Metal / Nonferrous Metal | Case Material | Brass Nickel Plating | Sensor Detection Surface Material | PBT Resin |
| Power Supply and Output Specifications | 24V | Detection Frequency | 100 Hz | Lead Wire Length | 2 m |
Please check the type/dimensions/specifications of the part E-MSMC12-P01-H in the Proximity Sensor, Tantalum Capacitor (Ultra-High Speed), Cylinder type series.
Specification/Dimensions
-
Detecting Head Size/Dimension (M)
- M12
- M18
-
Shield
- Shield
- Non Shield
-
Detection Distance L1(mm)
- 1–3 mm adjustable distance
- 1–ุ6 mm adjustable distance
- 2–ุ8 mm adjustable distance
- 2–ุ15 mm adjustable distance
-
Output Pattern
- NPN·NO
- PNP·NO
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 6 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Products like this...
| Part Number |
|---|
| E-MSMC12-N01-H |
| E-MSMC12-N11-H |
| E-MSMC12-P11-H |
| E-MSMC18-N01-H |
| E-MSMC18-N11-H |
| E-MSMC18-P01-H |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Detecting Head Size/Dimension (M) | Shield | Detection Distance L1 (mm) | Output Pattern |
|---|---|---|---|---|---|---|---|---|
MYR 98.42 | 1 Piece(s) | Available | 6 Day(s) | M12 | Shield | 1–3 mm adjustable distance | NPN·NO | |
MYR 98.37 | 1 Piece(s) | Available | 6 Day(s) | M12 | Non Shield | 1–ุ6 mm adjustable distance | NPN·NO | |
MYR 98.36 | 1 Piece(s) | Available | 6 Day(s) | M12 | Non Shield | 1–ุ6 mm adjustable distance | PNP·NO | |
MYR 99.65 | 1 Piece(s) | Available | 6 Day(s) | M18 | Shield | 2–ุ8 mm adjustable distance | NPN·NO | |
MYR 99.72 | 1 Piece(s) | Available | 6 Day(s) | M18 | Non Shield | 2–ุ15 mm adjustable distance | NPN·NO | |
MYR 99.13 | 1 Piece(s) | Available | 6 Day(s) | M18 | Shield | 2–ุ8 mm adjustable distance | PNP·NO |
Additional Products in this Category
- Proximity Sensors with built-in Amplifier -Screw Type-
- Long Size Proximity Sensor [E2E2]
- Magnetic Proximity Sensor [GLS]
- TL-W Standard Flat Proximity Sensor
- Ultra Compact Proximity Sensor [E2S]
- All Metal & Long Range Type Proximity Sensor [E2V]
- Door Limit Switch, LE-124
- Welding Proximity Sensor, E2EW Series (Single distance model)
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy