(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Locating Pin Small Head, Flat End, Standard type (Part Numbers)
- Volume Discount
Part Number
Configured Part Number is shown.
Dimensional Drawing
*The lead-in section is only applicable to tolerance p7.
The D section of martensitic stainless steel has an identification groove.Austenitic stainless steel may be ground or have no center hole.・Material Specification table
| Material No. |  Material |  Surface Treatment |  Hardness | Type | D tolerance symbol | ||
| P Dimension Fixed Type | P dimension configurable | P·L·B dimension configurable | |||||
| ① | SKS3 Equivalent | - | Quenching hardness 60 to 63HRC | E-JPDB | E-JPDS | E-FPDS | C(m7) PC(p7) |
| ② | SKS3 Equivalent | Hard Chrome Plated | Quenching hardness 50–55HRC Coating hardness 750HV– | - | E-GJPDS | E-GFPDS | |
| ③ | SKS3 Equivalent | - | - | - | E-BJPDS | E-BFPDS | |
| ④ | SUS304 Equivalent | - | - | E-SJPDB | E-SJPDS | E-SFPDS | |
| ⑤ | SUS304 Equivalent | Hard Chrome Plated | Coating hardness 750HV or more | - | E-HJPDS | E-HFPDS | |
| ⑥ | SUS440C Equivalent | - | Quenching hardness 50 to 55HRC | E-CJPDB | E-CJPDS | E-CFPDS | |
Specification Table
| Part Number | - | P | - | L | - | B |
| E-JPDSC4 E-FPDSC4 | - - | 2.55 P2.01 | - | L6 | - | B5.5 |
■ P Dimension Tolerance Table
| P | h7 |
| 1.50~3.00 | 0 -0.010 |
| 3.01~6.00 | 0 -0.012 |
| 6.01~10.00 | 0 -0.015 |
| 10.01~18.00 | 0 -0.018 |
| 18.01~20.00 | 0 -0.021 |
■ P (Dimension Fixed Type)
| Part Number | P Selection | L | B | ℓ | C | ||||||||||||
| Type | D tolerance | D | D dimension tolerance | ||||||||||||||
| m7 | p7 | ||||||||||||||||
| E-JPDB E-SJPDB E-CJPDB | C(m7) PC(p7) | 3 | +0.012 +0.002 | +0.018 +0.009 | 2 | 5 | 3 | 1 | 0.1 | ||||||||
| 4 | +0.016 +0.004 | +0.024 +0.012 | 2 | 3 | 0.5 | ||||||||||||
| 5 | 2 | 3 | 4 | 8 | |||||||||||||
| 6 | 3 | 4 | 5 | 10 | 4 | ||||||||||||
| 8 | +0.021 +0.006 | +0.030 +0.015 | 4 | 5 | 6 | 12 | 2 | 1 | |||||||||
| 10 | 5 | 6 | 7 | 8 | 16 | 5 | |||||||||||
| 16 | +0.025 +0.007 | +0.036 +0.018 | 10 | 13 | 22 | 12 | 3 | ||||||||||
■ P dimension configurable
| Part Number | P Can be specified down to 0.01 mm increments | L | B | ℓ | C | ||||
| Type | D tolerance | D | D dimension tolerance | ||||||
| m7 | p7 | ||||||||
| E-JPDS E-GJPDS E-BJPDS E-SJPDS E-HJPDS E-CJPDS | C(m7) PC(p7) | 2 | +0.012 +0.002 | +0.018 +0.009 | 1.50 to 2.00 | 4 | 3 | 0 | 0.1 |
| 3 | 1.50 to 3.00 | 5 | 1 | ||||||
| 4 | +0.016 +0.004 | +0.024 +0.012 | 2.00 to 4.00 | 0.5 | |||||
| 5 | 2.00 to 5.00 | 8 | |||||||
| 6 | 2.00 to 6.00 | 10 | 4 | ||||||
| 8 | +0.021 +0.006 | +0.030 +0.015 | 3.00 to 8.00 | 12 | 2 | 1 | |||
| 10 | 3.00 to 10.00 | 16 | 5 | ||||||
| 12 | +0.025 +0.007 | +0.036 +0.018 | 5.00 to 12.00 | 20 | 6 | 1.5 | |||
| 13 | 6.00 to 13.00 | 22 | 10 | 2 | |||||
| 16 | 10.00 to 16.00 | 12 | 3 | ||||||
| 20 | +0.029 +0.008 | +0.043 +0.022 | 13.00 to 20.00 | 30 | 20 | ||||
■ P, L, B dimension configurable
| Part Number | P Can be specified down to 0.01 mm increments | L can be specified down to 1 mm increments | B Can be specified down to 0.1 mm increments | ℓ | C | ||||
| Type | D tolerance | D | D dimension tolerance | ||||||
| m7 | p7 | ||||||||
| E-FPDS E-GFPDS E-BFPDS E-SFPDS E-HFPDS E-CFPDS | C(m7) PC(p7) | 2 | +0.012 +0.002 | +0.018 +0.009 | 1.50 to 2.00 | 2 to 4 | 3.0 to 10.0 | 0 | 0.1 |
| 3 | 1.50 to 3.00 | 3 to 6 | 3.0 to 10.0 | 1 | |||||
| 4 | +0.016 +0.004 | +0.024 +0.012 | 2.00 to 4.00 | 4 to 8 | 4.0 to 10.0 | 0.5 | |||
| 5 | 2.00 to 5.00 | 5 to 10 | 4.0 to 10.0 | ||||||
| 6 | 2.00 to 6.00 | 6 to 12 | 4.0 to 12.0 | ||||||
| 8 | +0.021 +0.006 | +0.030 +0.015 | 3.00 to 8.00 | 8 to 16 | 6.0 to 15.0 | 1 | |||
| 10 | 3.00 to 10.00 | 10 to 20 | 6.0 to 20.0 | 2 | |||||
| 12 | +0.025 +0.007 | +0.036 +0.018 | 5.00 to 12.00 | 12 to 24 | 6.0 to 20.0 | 1.5 | |||
| 13 | 6.00 to 13.00 | 13 to 26 | 6.0 to 20.0 | 2 | |||||
| 16 | 10.00 to 16.00 | 16 to 32 | 7.0 to 20.0 | 3 | |||||
| 20 | +0.029 +0.008 | +0.043 +0.022 | 13.00 to 20.00 | 20 to 40 | 7.0 to 20.0 | ||||
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| E-CJPDBPC6-3 |
| E-CJPDBPC6-4 |
| E-CJPDBPC6-5 |
| E-CJPDBPC8-4 |
| E-CJPDBPC8-5 |
| E-CJPDBPC8-6 |
| E-CJPDBPC10-5 |
| E-CJPDBPC10-6 |
| E-CJPDBPC10-7 |
| E-CJPDBPC10-8 |
| E-CJPDBPC16-10 |
| E-CJPDBPC16-13 |
| E-CJPDSC2-[1.5-2/0.01] |
| E-CJPDSC3-[1.5-3/0.01] |
| E-CJPDSC4-[2-4/0.01] |
| E-CJPDSC5-[2-5/0.01] |
| E-CJPDSC6-[2-6/0.01] |
| E-CJPDSC8-[3-8/0.01] |
| E-CJPDSC10-[3-10/0.01] |
| E-CJPDSC12-[5-12/0.01] |
| E-CJPDSC13-[6-13/0.01] |
| E-CJPDSC16-[10-16/0.01] |
| E-CJPDSC20-[13-20/0.01] |
| E-CJPDSPC2-[1.5-2/0.01] |
| E-CJPDSPC3-[1.5-3/0.01] |
| E-CJPDSPC4-[2-4/0.01] |
| E-CJPDSPC5-[2-5/0.01] |
| E-CJPDSPC6-[2-6/0.01] |
| E-CJPDSPC8-[3-8/0.01] |
| E-CJPDSPC10-[3-10/0.01] |
| E-CJPDSPC12-[5-12/0.01] |
| E-CJPDSPC13-[6-13/0.01] |
| E-CJPDSPC16-[10-16/0.01] |
| E-CJPDSPC20-[13-20/0.01] |
| E-FPDSC2-P[1.5-2/0.01]-L[2-5/1]-B[3-10/0.1] |
| E-FPDSC3-P[1.5-3/0.01]-L[3-10/1]-B[3-10/0.1] |
| E-FPDSC4-P[1.5-4/0.01]-L[4-10/1]-B[4-10/0.1] |
| E-FPDSC5-P[2-5/0.01]-L[5-10/1]-B[4-15/0.1] |
| E-FPDSC6-P[2-6/0.01]-L[5-17/1]-B[4-15/0.1] |
| E-FPDSC8-P[3-8/0.01]-L[8-21/1]-B[6-20/0.1] |
| E-FPDSC10-P[3-10/0.01]-L[10-23/1]-B[6-20/0.1] |
| E-FPDSC12-P[5-12/0.01]-L[12-24/1]-B[6-30/0.1] |
| E-FPDSC13-P[6-13/0.01]-L[13-26/1]-B[6-30/0.1] |
| E-FPDSC16-P[10-16/0.01]-L[16-32/1]-B[7-30/0.1] |
| E-FPDSC20-P[13-20/0.01]-L[20-40/1]-B[7-30/0.1] |
| E-FPDSPC2-P[1.5-2/0.01]-L[2-5/1]-B[3-10/0.1] |
| E-FPDSPC3-P[1.5-3/0.01]-L[3-10/1]-B[3-10/0.1] |
| E-FPDSPC4-P[1.5-4/0.01]-L[4-10/1]-B[4-10/0.1] |
| E-FPDSPC5-P[2-5/0.01]-L[5-10/1]-B[4-15/0.1] |
| E-FPDSPC6-P[2-6/0.01]-L[5-17/1]-B[4-15/0.1] |
| E-FPDSPC8-P[3-8/0.01]-L[8-21/1]-B[6-20/0.1] |
| E-FPDSPC10-P[3-10/0.01]-L[10-23/1]-B[6-20/0.1] |
| E-FPDSPC12-P[5-12/0.01]-L[12-24/1]-B[6-30/0.1] |
| E-FPDSPC13-P[6-13/0.01]-L[13-26/1]-B[6-30/0.1] |
| E-FPDSPC16-P[10-16/0.01]-L[16-32/1]-B[7-30/0.1] |
| E-FPDSPC20-P[13-20/0.01]-L[20-40/1]-B[7-30/0.1] |
| E-GFPDSC4-P[1.5-4/0.01]-L[4-10/1]-B[4-10/0.1] |
| E-GFPDSC5-P[2-5/0.01]-L[5-10/1]-B[4-15/0.1] |
| E-GFPDSC6-P[2-6/0.01]-L[5-17/1]-B[4-15/0.1] |
| E-GFPDSC8-P[3-8/0.01]-L[8-21/1]-B[6-20/0.1] |
| E-GFPDSC10-P[3-10/0.01]-L[10-23/1]-B[6-20/0.1] |
| E-GFPDSC12-P[5-12/0.01]-L[12-24/1]-B[6-30/0.1] |
| E-GFPDSC13-P[6-13/0.01]-L[13-26/1]-B[6-30/0.1] |
| E-GFPDSC16-P[10-16/0.01]-L[16-32/1]-B[7-30/0.1] |
| E-GFPDSC20-P[13-20/0.01]-L[20-40/1]-B[7-30/0.1] |
| E-GFPDSPC4-P[1.5-4/0.01]-L[4-10/1]-B[4-10/0.1] |
| E-GFPDSPC5-P[2-5/0.01]-L[5-10/1]-B[4-15/0.1] |
| E-GFPDSPC6-P[2-6/0.01]-L[5-17/1]-B[4-15/0.1] |
| E-GFPDSPC8-P[3-8/0.01]-L[8-21/1]-B[6-20/0.1] |
| E-GFPDSPC10-P[3-10/0.01]-L[10-23/1]-B[6-20/0.1] |
| E-GFPDSPC12-P[5-12/0.01]-L[12-24/1]-B[6-30/0.1] |
| E-GFPDSPC13-P[6-13/0.01]-L[13-26/1]-B[6-30/0.1] |
| E-GFPDSPC16-P[10-16/0.01]-L[16-32/1]-B[7-30/0.1] |
| E-GFPDSPC20-P[13-20/0.01]-L[20-40/1]-B[7-30/0.1] |
| E-GJPDSC4-[2-4/0.01] |
| E-GJPDSC5-[2-5/0.01] |
| E-GJPDSC6-[2-6/0.01] |
| E-GJPDSC8-[3-8/0.01] |
| E-GJPDSC10-[3-10/0.01] |
| E-GJPDSC12-[5-12/0.01] |
| E-GJPDSC13-[6-13/0.01] |
| E-GJPDSC16-[10-16/0.01] |
| E-GJPDSC20-[13-20/0.01] |
| E-GJPDSPC4-[2-4/0.01] |
| E-GJPDSPC5-[2-5/0.01] |
| E-GJPDSPC6-[2-6/0.01] |
| E-GJPDSPC8-[3-8/0.01] |
| E-GJPDSPC10-[3-10/0.01] |
| E-GJPDSPC12-[5-12/0.01] |
| E-GJPDSPC13-[6-13/0.01] |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Surface Treatment | Heat Treatment | Steel Type | Stainless Steel Type | Locating Side Outer Dia. P (Ø) (mm) | Mounting Side Outer Dia. D (mm) | Mounting Section Length L (mm) | Positioning Part Length B (mm) | Dimension Configurable Type | Application | Shouldered | Mounting Side Tolerance | Installation Part Length L (mm) | Length of Positioning Portion B (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 24.36 | 1 Piece(s) | Available | 7 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 3 | 6 | 10 | 4 | P Fixed | - | - | p7 | - | - | |
MYR 24.36 | 1 Piece(s) | Available | 7 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 4 | 6 | 10 | 4 | P Fixed | - | - | p7 | - | - | |
MYR 24.36 | 1 Piece(s) | Available | 7 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 5 | 6 | 10 | 4 | P Fixed | - | - | p7 | - | - | |
MYR 45.54 | 1 Piece(s) | Available | 7 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 4 | 8 | 12 | 4 | P Fixed | - | - | p7 | - | - | |
MYR 45.54 | 1 Piece(s) | Available | 7 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 5 | 8 | 12 | 4 | P Fixed | - | - | p7 | - | - | |
MYR 45.54 | 1 Piece(s) | Available | 7 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 6 | 8 | 12 | 4 | P Fixed | - | - | p7 | - | - | |
MYR 47.45 | 1 Piece(s) | Available | 7 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 5 | 10 | 16 | 5 | P Fixed | - | - | p7 | - | - | |
MYR 47.45 | 1 Piece(s) | Available | 7 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 6 | 10 | 16 | 5 | P Fixed | - | - | p7 | - | - | |
MYR 47.45 | 1 Piece(s) | Available | 7 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 7 | 10 | 16 | 5 | P Fixed | - | - | p7 | - | - | |
MYR 47.45 | 1 Piece(s) | Available | 7 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 8 | 10 | 16 | 5 | P Fixed | - | - | p7 | - | - | |
MYR 58.49 | 1 Piece(s) | Available | 7 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 10 | 16 | 22 | 12 | P Fixed | - | - | p7 | - | - | |
MYR 58.49 | 1 Piece(s) | Available | 7 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 13 | 16 | 22 | 12 | P Fixed | - | - | p7 | - | - | |
- | 1 Piece(s) | 7 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 1.5 ～ 2 | 2 | 4 | 3 | P Configurable | - | - | m7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 1.5 ～ 3 | 3 | 5 | 3 | P Configurable | - | - | m7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 2 ～ 4 | 4 | 5 | 3 | P Configurable | - | - | m7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 2 ～ 5 | 5 | 8 | 3 | P Configurable | - | - | m7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 2 ～ 6 | 6 | 10 | 4 | P Configurable | - | - | m7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 3 ～ 8 | 8 | 12 | 4 | P Configurable | - | - | m7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 3 ～ 10 | 10 | 16 | 5 | P Configurable | - | - | m7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 5 ～ 12 | 12 | 20 | 6 | P Configurable | - | - | m7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 6 ～ 13 | 13 | 22 | 10 | P Configurable | - | - | m7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 10 ～ 16 | 16 | 22 | 12 | P Configurable | - | - | m7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 13 ～ 20 | 20 | 30 | 20 | P Configurable | - | - | m7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 1.5 ～ 2 | 2 | 4 | 3 | P Configurable | - | - | p7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 1.5 ～ 3 | 3 | 5 | 3 | P Configurable | - | - | p7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 2 ～ 4 | 4 | 5 | 3 | P Configurable | - | - | p7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 2 ～ 5 | 5 | 8 | 3 | P Configurable | - | - | p7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 2 ～ 6 | 6 | 10 | 4 | P Configurable | - | - | p7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 3 ～ 8 | 8 | 12 | 4 | P Configurable | - | - | p7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 3 ～ 10 | 10 | 16 | 5 | P Configurable | - | - | p7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 5 ～ 12 | 12 | 20 | 6 | P Configurable | - | - | p7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 6 ～ 13 | 13 | 22 | 10 | P Configurable | - | - | p7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 10 ～ 16 | 16 | 22 | 12 | P Configurable | - | - | p7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 13 ～ 20 | 20 | 30 | 20 | P Configurable | - | - | p7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Dip Quenching | [SKS3] Alloy tool steel or bearing steel | - | 1.5 ～ 2 | 2 | - | - | P, L, B Configurable | - | - | m7 | 2 ～ 5 | 3 ～ 10 | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Dip Quenching | [SKS3] Alloy tool steel or bearing steel | - | 1.5 ～ 3 | 3 | - | - | P, L, B Configurable | - | - | m7 | 3 ～ 10 | 3 ～ 10 | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Dip Quenching | [SKS3] Alloy tool steel or bearing steel | - | 1.5 ～ 4 | 4 | - | - | P, L, B Configurable | - | - | m7 | 4 ～ 10 | 4 ～ 10 | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Dip Quenching | [SKS3] Alloy tool steel or bearing steel | - | 2 ～ 5 | 5 | - | - | P, L, B Configurable | - | - | m7 | 5 ～ 10 | 4 ～ 15 | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Dip Quenching | [SKS3] Alloy tool steel or bearing steel | - | 2 ～ 6 | 6 | - | - | P, L, B Configurable | - | - | m7 | 5 ～ 17 | 4 ～ 15 | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Dip Quenching | [SKS3] Alloy tool steel or bearing steel | - | 3 ～ 8 | 8 | - | - | P, L, B Configurable | - | - | m7 | 8 ～ 21 | 6 ～ 20 | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Dip Quenching | [SKS3] Alloy tool steel or bearing steel | - | 3 ～ 10 | 10 | - | - | P, L, B Configurable | - | - | m7 | 10 ～ 23 | 6 ～ 20 | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Dip Quenching | [SKS3] Alloy tool steel or bearing steel | - | 5 ～ 12 | 12 | - | - | P, L, B Configurable | - | - | m7 | 12 ～ 24 | 6 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Dip Quenching | [SKS3] Alloy tool steel or bearing steel | - | 6 ～ 13 | 13 | - | - | P, L, B Configurable | - | - | m7 | 13 ～ 26 | 6 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Dip Quenching | [SKS3] Alloy tool steel or bearing steel | - | 10 ～ 16 | 16 | - | - | P, L, B Configurable | - | - | m7 | 16 ～ 32 | 7 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Dip Quenching | [SKS3] Alloy tool steel or bearing steel | - | 13 ～ 20 | 20 | - | - | P, L, B Configurable | - | - | m7 | 20 ～ 40 | 7 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Dip Quenching | [SKS3] Alloy tool steel or bearing steel | - | 1.5 ～ 2 | 2 | - | - | P, L, B Configurable | - | - | p7 | 2 ～ 5 | 3 ～ 10 | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Dip Quenching | [SKS3] Alloy tool steel or bearing steel | - | 1.5 ～ 3 | 3 | - | - | P, L, B Configurable | - | - | p7 | 3 ～ 10 | 3 ～ 10 | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Dip Quenching | [SKS3] Alloy tool steel or bearing steel | - | 1.5 ～ 4 | 4 | - | - | P, L, B Configurable | - | - | p7 | 4 ～ 10 | 4 ～ 10 | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Dip Quenching | [SKS3] Alloy tool steel or bearing steel | - | 2 ～ 5 | 5 | - | - | P, L, B Configurable | - | - | p7 | 5 ～ 10 | 4 ～ 15 | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Dip Quenching | [SKS3] Alloy tool steel or bearing steel | - | 2 ～ 6 | 6 | - | - | P, L, B Configurable | - | - | p7 | 5 ～ 17 | 4 ～ 15 | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Dip Quenching | [SKS3] Alloy tool steel or bearing steel | - | 3 ～ 8 | 8 | - | - | P, L, B Configurable | - | - | p7 | 8 ～ 21 | 6 ～ 20 | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Dip Quenching | [SKS3] Alloy tool steel or bearing steel | - | 3 ～ 10 | 10 | - | - | P, L, B Configurable | - | - | p7 | 10 ～ 23 | 6 ～ 20 | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Dip Quenching | [SKS3] Alloy tool steel or bearing steel | - | 5 ～ 12 | 12 | - | - | P, L, B Configurable | - | - | p7 | 12 ～ 24 | 6 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Dip Quenching | [SKS3] Alloy tool steel or bearing steel | - | 6 ～ 13 | 13 | - | - | P, L, B Configurable | - | - | p7 | 13 ～ 26 | 6 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Dip Quenching | [SKS3] Alloy tool steel or bearing steel | - | 10 ～ 16 | 16 | - | - | P, L, B Configurable | - | - | p7 | 16 ～ 32 | 7 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Dip Quenching | [SKS3] Alloy tool steel or bearing steel | - | 13 ～ 20 | 20 | - | - | P, L, B Configurable | - | - | p7 | 20 ～ 40 | 7 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [SKS3] Alloy tool steel or bearing steel | - | 1.5 ～ 4 | 4 | - | - | P, L, B Configurable | - | - | m7 | 4 ～ 10 | 4 ～ 10 | ||
- | 1 Piece(s) | 7 Day(s) | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [SKS3] Alloy tool steel or bearing steel | - | 2 ～ 5 | 5 | - | - | P, L, B Configurable | - | - | m7 | 5 ～ 10 | 4 ～ 15 | ||
- | 1 Piece(s) | 7 Day(s) | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [SKS3] Alloy tool steel or bearing steel | - | 2 ～ 6 | 6 | - | - | P, L, B Configurable | - | - | m7 | 5 ～ 17 | 4 ～ 15 | ||
- | 1 Piece(s) | 7 Day(s) | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [SKS3] Alloy tool steel or bearing steel | - | 3 ～ 8 | 8 | - | - | P, L, B Configurable | - | - | m7 | 8 ～ 21 | 6 ～ 20 | ||
- | 1 Piece(s) | 7 Day(s) | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [SKS3] Alloy tool steel or bearing steel | - | 3 ～ 10 | 10 | - | - | P, L, B Configurable | - | - | m7 | 10 ～ 23 | 6 ～ 20 | ||
- | 1 Piece(s) | 7 Day(s) | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [SKS3] Alloy tool steel or bearing steel | - | 5 ～ 12 | 12 | - | - | P, L, B Configurable | - | - | m7 | 12 ～ 24 | 6 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [SKS3] Alloy tool steel or bearing steel | - | 6 ～ 13 | 13 | - | - | P, L, B Configurable | - | - | m7 | 13 ～ 26 | 6 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [SKS3] Alloy tool steel or bearing steel | - | 10 ～ 16 | 16 | - | - | P, L, B Configurable | - | - | m7 | 16 ～ 32 | 7 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [SKS3] Alloy tool steel or bearing steel | - | 13 ～ 20 | 20 | - | - | P, L, B Configurable | - | - | m7 | 20 ～ 40 | 7 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [SKS3] Alloy tool steel or bearing steel | - | 1.5 ～ 4 | 4 | - | - | P, L, B Configurable | - | - | p7 | 4 ～ 10 | 4 ～ 10 | ||
- | 1 Piece(s) | 7 Day(s) | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [SKS3] Alloy tool steel or bearing steel | - | 2 ～ 5 | 5 | - | - | P, L, B Configurable | - | - | p7 | 5 ～ 10 | 4 ～ 15 | ||
- | 1 Piece(s) | 7 Day(s) | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [SKS3] Alloy tool steel or bearing steel | - | 2 ～ 6 | 6 | - | - | P, L, B Configurable | - | - | p7 | 5 ～ 17 | 4 ～ 15 | ||
- | 1 Piece(s) | 7 Day(s) | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [SKS3] Alloy tool steel or bearing steel | - | 3 ～ 8 | 8 | - | - | P, L, B Configurable | - | - | p7 | 8 ～ 21 | 6 ～ 20 | ||
- | 1 Piece(s) | 7 Day(s) | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [SKS3] Alloy tool steel or bearing steel | - | 3 ～ 10 | 10 | - | - | P, L, B Configurable | - | - | p7 | 10 ～ 23 | 6 ～ 20 | ||
- | 1 Piece(s) | 7 Day(s) | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [SKS3] Alloy tool steel or bearing steel | - | 5 ～ 12 | 12 | - | - | P, L, B Configurable | - | - | p7 | 12 ～ 24 | 6 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [SKS3] Alloy tool steel or bearing steel | - | 6 ～ 13 | 13 | - | - | P, L, B Configurable | - | - | p7 | 13 ～ 26 | 6 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [SKS3] Alloy tool steel or bearing steel | - | 10 ～ 16 | 16 | - | - | P, L, B Configurable | - | - | p7 | 16 ～ 32 | 7 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [SKS3] Alloy tool steel or bearing steel | - | 13 ～ 20 | 20 | - | - | P, L, B Configurable | - | - | p7 | 20 ～ 40 | 7 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | - | Dip Quenching | [SKS3] Alloy tool steel or bearing steel | - | 2 ～ 4 | 4 | 5 | 3 | P Configurable | Standard Shape | Not Provided | m7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | - | Dip Quenching | [SKS3] Alloy tool steel or bearing steel | - | 2 ～ 5 | 5 | 8 | 3 | P Configurable | Standard Shape | Not Provided | m7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | - | Dip Quenching | [SKS3] Alloy tool steel or bearing steel | - | 2 ～ 6 | 6 | 10 | 4 | P Configurable | Standard Shape | Not Provided | m7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | - | Dip Quenching | [SKS3] Alloy tool steel or bearing steel | - | 3 ～ 8 | 8 | 12 | 4 | P Configurable | Standard Shape | Not Provided | m7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | - | Dip Quenching | [SKS3] Alloy tool steel or bearing steel | - | 3 ～ 10 | 10 | 16 | 5 | P Configurable | Standard Shape | Not Provided | m7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | - | Dip Quenching | [SKS3] Alloy tool steel or bearing steel | - | 5 ～ 12 | 12 | 20 | 6 | P Configurable | Standard Shape | Not Provided | m7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | - | Dip Quenching | [SKS3] Alloy tool steel or bearing steel | - | 6 ～ 13 | 13 | 22 | 10 | P Configurable | Standard Shape | Not Provided | m7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | - | Dip Quenching | [SKS3] Alloy tool steel or bearing steel | - | 10 ～ 16 | 16 | 22 | 12 | P Configurable | Standard Shape | Not Provided | m7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | - | Dip Quenching | [SKS3] Alloy tool steel or bearing steel | - | 13 ～ 20 | 20 | 30 | 20 | P Configurable | Standard Shape | Not Provided | m7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | - | Dip Quenching | [SKS3] Alloy tool steel or bearing steel | - | 2 ～ 4 | 4 | 5 | 3 | P Configurable | Standard Shape | Not Provided | p7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | - | Dip Quenching | [SKS3] Alloy tool steel or bearing steel | - | 2 ～ 5 | 5 | 8 | 3 | P Configurable | Standard Shape | Not Provided | p7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | - | Dip Quenching | [SKS3] Alloy tool steel or bearing steel | - | 2 ～ 6 | 6 | 10 | 4 | P Configurable | Standard Shape | Not Provided | p7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | - | Dip Quenching | [SKS3] Alloy tool steel or bearing steel | - | 3 ～ 8 | 8 | 12 | 4 | P Configurable | Standard Shape | Not Provided | p7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | - | Dip Quenching | [SKS3] Alloy tool steel or bearing steel | - | 3 ～ 10 | 10 | 16 | 5 | P Configurable | Standard Shape | Not Provided | p7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | - | Dip Quenching | [SKS3] Alloy tool steel or bearing steel | - | 5 ～ 12 | 12 | 20 | 6 | P Configurable | Standard Shape | Not Provided | p7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | - | Dip Quenching | [SKS3] Alloy tool steel or bearing steel | - | 6 ～ 13 | 13 | 22 | 10 | P Configurable | Standard Shape | Not Provided | p7 | - | - |
Loading...
Basic Information
| Basic Shape | Small Head | Insertion Guide Tip Shape | Round | Insertion Guide Tip Type | Flat |
|---|---|---|---|---|---|
| Insertion Guide Specifications | Not Provided | Mounting Side Shape | Straight (Press-Fit) | Locating Side O.D. Tolerance | h7 |
Specification/Dimensions
-
Surface Treatment
- Not Provided
- Hard Chrome Plating
-
Heat Treatment
- Not Provided
- Dip Quenching
-
Steel Type
- SKS3
- SKS3
-
Stainless Steel Type
- SUS304
- SUS440C
- SUS304
-
Locating Side Outer Dia. P (Ø)(mm)
-
Mounting Side Outer Dia. D(mm)
-
Mounting Section Length L(mm)
-
Positioning Part Length B(mm)
-
Dimension Configurable Type
- P Configurable
- P Fixed
- P, L, B Configurable
-
Application
- Standard Shape
-
Shouldered
- Not Provided
-
Mounting Side Tolerance
-
Installation Part Length L(mm)
-
Length of Positioning Portion B(mm)
-
type
- E-BFPDSC
- E-BFPDSPC
- E-BJPDSC
- E-BJPDSPC
- E-CFPDSC
- E-CFPDSPC
- E-CJPDBC
- E-CJPDBPC
- E-CJPDSC
- E-CJPDSPC
- E-FPDSC
- E-FPDSPC
- E-GFPDSC
- E-GFPDSPC
- E-GJPDSC
- E-GJPDSPC
- E-HFPDSC
- E-HFPDSPC
- E-HJPDSC
- E-HJPDSPC
- E-JPDBC
- E-JPDBPC
- E-JPDSC
- E-JPDSPC
- E-SFPDSC
- E-SFPDSPC
- E-SJPDBC
- E-SJPDBPC
- E-SJPDSC
- E-SJPDSPC
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 7 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Locating Pins - Tip Shape Selectable (Tip Length Configurable-Threaded)
- Locating Pins - Shouldered-Taper Angle (D,P Tolerance Selectable-Press Fit)
- Locating Pins for Grippers - Counterbored
- Locating Pin High Hardness Stainless Steel Straight Tip Shape Selection - Tapped -
- Large Head Locating Pins - Spherical
- Locating Pin Large Head, Selectable Tapered Angle, Selectable Tolerance, Threaded
- Positioning Pin - Eccentric
- Straight Pin (BJ721)
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy