[Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Locating Pin Small Head, Flat End, Standard type (E-CJPDBPC10-5)

Volume Discount

MISUMI

MiSUMi Economy

MISUMI

Part Number

Configured Part Number is shown.

E-CJPDBPC10-5

Drawing/Specifications
3D Preview
Part Numbers

Dimensional Drawing

Positioning Pin, Small Flat Head Type, Standard:Related Images

*The lead-in section is only applicable to tolerance p7.

The D section of martensitic stainless steel has an identification groove.

Austenitic stainless steel may be ground or have no center hole.

・Material Specification table

Material No.	Material	Surface Treatment	Hardness	Type			D tolerance symbol
Material No.	Material	Surface Treatment	Hardness	P Dimension Fixed Type	P dimension configurable	P·L·B dimension configurable	D tolerance symbol
①	SKS3 Equivalent	-	Quenching hardness 60 to 63HRC	E-JPDB	E-JPDS	E-FPDS	C(m7) PC(p7)
②	SKS3 Equivalent	Hard Chrome Plated	Quenching hardness 50–55HRC Coating hardness 750HV–	-	E-GJPDS	E-GFPDS
③	SKS3 Equivalent	-	-	-	E-BJPDS	E-BFPDS
④	SUS304 Equivalent	-	-	E-SJPDB	E-SJPDS	E-SFPDS
⑤	SUS304 Equivalent	Hard Chrome Plated	Coating hardness 750HV or more	-	E-HJPDS	E-HFPDS
⑥	SUS440C Equivalent	-	Quenching hardness 50 to 55HRC	E-CJPDB	E-CJPDS	E-CFPDS

Specification Table

Part Number	-	P	-	L	-	B
E-JPDSC4 E-FPDSC4	- -	2.55 P2.01	-	L6	-	B5.5

■ P Dimension Tolerance Table

P	h7
1.50~3.00	0 -0.010
3.01~6.00	0 -0.012
6.01~10.00	0 -0.015
10.01~18.00	0 -0.018
18.01~20.00	0 -0.021

■ P (Dimension Fixed Type)

Part Number					P Selection									L	B	ℓ	C
Type	D tolerance	D	D dimension tolerance
Type	D tolerance	D	m7	p7
E-JPDB E-SJPDB E-CJPDB	C(m7) PC(p7)	3	+0.012 +0.002	+0.018 +0.009	2									5	3	1	0.1
		4	+0.016 +0.004	+0.024 +0.012	2	3								5			0.5
		5			2	3	4							8
		6				3	4	5						10	4
		8	+0.021 +0.006	+0.030 +0.015			4	5	6					12	4	2	1
		10	+0.021 +0.006	+0.030 +0.015				5	6	7	8			16	5		1
		16	+0.025 +0.007	+0.036 +0.018								10	13	22	12		3

■ P dimension configurable

Part Number					P Can be specified down to 0.01 mm increments	L	B	ℓ	C
Type	D tolerance	D	D dimension tolerance
			m7	p7
E-JPDS E-GJPDS E-BJPDS E-SJPDS E-HJPDS E-CJPDS	C(m7) PC(p7)	2	+0.012 +0.002	+0.018 +0.009	1.50 to 2.00	4	3	0	0.1
		3			1.50 to 3.00	5		1
		4	+0.016 +0.004	+0.024 +0.012	2.00 to 4.00				0.5
		5			2.00 to 5.00	8
		6			2.00 to 6.00	10	4
		8	+0.021 +0.006	+0.030 +0.015	3.00 to 8.00	12		2	1
		10			3.00 to 10.00	16	5
		12	+0.025 +0.007	+0.036 +0.018	5.00 to 12.00	20	6		1.5
		13			6.00 to 13.00	22	10		2
		16			10.00 to 16.00		12		3
		20	+0.029 +0.008	+0.043 +0.022	13.00 to 20.00	30	20

■ P, L, B dimension configurable

Part Number					P Can be specified down to 0.01 mm increments	L can be specified down to 1 mm increments	B Can be specified down to 0.1 mm increments	ℓ	C
Type	D tolerance	D	D dimension tolerance
			m7	p7
E-FPDS E-GFPDS E-BFPDS E-SFPDS E-HFPDS E-CFPDS	C(m7) PC(p7)	2	+0.012 +0.002	+0.018 +0.009	1.50 to 2.00	2 to 4	3.0 to 10.0	0	0.1
		3			1.50 to 3.00	3 to 6	3.0 to 10.0	1
		4	+0.016 +0.004	+0.024 +0.012	2.00 to 4.00	4 to 8	4.0 to 10.0		0.5
		5			2.00 to 5.00	5 to 10	4.0 to 10.0
		6			2.00 to 6.00	6 to 12	4.0 to 12.0
		8	+0.021 +0.006	+0.030 +0.015	3.00 to 8.00	8 to 16	6.0 to 15.0		1
		10			3.00 to 10.00	10 to 20	6.0 to 20.0	2
		12	+0.025 +0.007	+0.036 +0.018	5.00 to 12.00	12 to 24	6.0 to 20.0		1.5
		13			6.00 to 13.00	13 to 26	6.0 to 20.0		2
		16			10.00 to 16.00	16 to 32	7.0 to 20.0		3
		20	+0.029 +0.008	+0.043 +0.022	13.00 to 20.00	20 to 40	7.0 to 20.0

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 45; 60

Part Number
E-CJPDBPC10-5

Part Number	Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	Surface Treatment	Heat Treatment	Steel Type	Stainless Steel Type	Locating Side Outer Dia. P (Ø) (mm)	Mounting Side Outer Dia. D (mm)	Mounting Section Length L (mm)	Positioning Part Length B (mm)	Dimension Configurable Type	Application	Shouldered	Mounting Side Tolerance	Installation Part Length L (mm)	Length of Positioning Portion B (mm)
	MYR 47.45	1 Piece(s)	Available	7 Day(s)	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	5	10	16	5	P Fixed	-	-	p7	-	-

Basic Information

Basic Shape	Small Head	Insertion Guide Tip Shape	Round	Insertion Guide Tip Type	Flat
Insertion Guide Specifications	Not Provided	Mounting Side Shape	Straight (Press-Fit)	Locating Side O.D. Tolerance	h7

Please check the type/dimensions/specifications of the part E-CJPDBPC10-5 in the Locating Pin Small Head, Flat End, Standard type series.

Configure

1 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Steel Type
- SKS3
  - Alloy tool steel or bearing steel
Clear
Application
- Standard Shape
Clear
Shouldered
- Not Provided
Clear
Installation Part Length L(mm)
Clear
Length of Positioning Portion B(mm)
Clear
type
- E-BFPDSC
- E-BFPDSPC
- E-BJPDSC
- E-BJPDSPC
- E-CFPDSC
- E-CFPDSPC
- E-CJPDBC
- E-CJPDBPC
- E-CJPDSC
- E-CJPDSPC
- E-FPDSC
- E-FPDSPC
- E-GFPDSC
- E-GFPDSPC
- E-GJPDSC
- E-GJPDSPC
- E-HFPDSC
- E-HFPDSPC
- E-HJPDSC
- E-HJPDSPC
- E-JPDBC
- E-JPDBPC
- E-JPDSC
- E-JPDSPC
- E-SFPDSC
- E-SFPDSPC
- E-SJPDBC
- E-SJPDBPC
- E-SJPDSC
- E-SJPDSPC
Clear
Surface Treatment
- Not Provided
- Hard Chrome Plating
  - Hard Chrome Plating
Clear
Heat Treatment
- Not Provided
- Dip Quenching
Clear
Stainless Steel Type
- SUS304
  - SUS304 Equivalent
- SUS440C
  - Martensitic Stainless Steel
Clear
Locating Side Outer Dia. P (Ø)(mm)
2

3

4

5

6

7

8

10

13
Clear
Mounting Side Outer Dia. D(mm)
2

3

4

5

6

8

10

12

13

16

20
Clear
Mounting Section Length L(mm)
4

5

8

10

12

16

20

22

30
Clear
Positioning Part Length B(mm)
3

4

5

6

10

12

20
Clear
Dimension Configurable Type
- P Configurable
- P Fixed
- P, L, B Configurable
Clear
Mounting Side Tolerance
m7

p7
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

7 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Products like this...

Part Number
E-CJPDBC10-8
E-CJPDBC16-10
E-CJPDBC16-13
E-CJPDBPC10-6
E-CJPDBPC10-7
E-CJPDBPC10-8

Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	Surface Treatment	Heat Treatment	Steel Type	Stainless Steel Type	Locating Side Outer Dia. P (Ø) (mm)	Mounting Side Outer Dia. D (mm)	Mounting Section Length L (mm)	Positioning Part Length B (mm)	Dimension Configurable Type	Application	Shouldered	Mounting Side Tolerance	Installation Part Length L (mm)	Length of Positioning Portion B (mm)
MYR 47.45	1 Piece(s)	Available	7 Day(s)	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	8	10	16	5	P Fixed	-	-	m7	-	-
MYR 58.49	1 Piece(s)	Available	7 Day(s)	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	10	16	22	12	P Fixed	-	-	m7	-	-
MYR 58.49	1 Piece(s)	Available	7 Day(s)	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	13	16	22	12	P Fixed	-	-	m7	-	-
MYR 47.45	1 Piece(s)	Available	7 Day(s)	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	6	10	16	5	P Fixed	-	-	p7	-	-
MYR 47.45	1 Piece(s)	Available	7 Day(s)	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	7	10	16	5	P Fixed	-	-	p7	-	-
MYR 47.45	1 Piece(s)	Available	7 Day(s)	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	8	10	16	5	P Fixed	-	-	p7	-	-

Additional Products in this Category

Tech Support

: Technical Inquiry

How can we improve?

Locating Pin Small Head, Flat End, Standard type (E-CJPDBPC10-5)

Part Number

Basic Information

Configure

Specification/Dimensions

Steel Type

Application

Shouldered

Installation Part Length L(mm)

Length of Positioning Portion B(mm)

type

Surface Treatment

Heat Treatment

Stainless Steel Type

Locating Side Outer Dia. P (Ø)(mm)

Mounting Side Outer Dia. D(mm)

Mounting Section Length L(mm)

Positioning Part Length B(mm)

Dimension Configurable Type

Mounting Side Tolerance

CAD

Days to Ship

Specify Alterations

Products like this...

Additional Products in this Category

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm