(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Locating Pin Large Head, Flat End Type, Standard type (Part Numbers)
Part Number
Configured Part Number is shown.
Product Overview
The positioning pin is used for the spatial positioning in the directions of X and Y axes, mainly using the workpiece hole as the positioning benchmark or used in conjunction with bushings, in which the large head flat type is suitable for situations where there is no space on the opposite side or the mating material is thin.
Dimensional Drawing
The D section of martensitic stainless steel has an identification groove.Austenitic stainless steel may be ground or have no center hole.■ Material Specification Table
If there are requirements for rust prevention, give priority to products with hard chrome plating or those made of stainless steel.
| Material No. |  Material |  Surface Treatment |  Hardness | P Dimension Fixed Type | P dimension configurable | P·L·B dimension configurable | |||
| Type | D tolerance | Type | D tolerance | Type | D tolerance | ||||
| ① | SKS3 Equivalent | - | Quenching hardness 60 to 63HRC | E-JP | DA(m7) DPA(p7) | E-JP | DC(m7) DPC(p7) | E-FP | DC(m7) DPC(p7) |
| ② | SKS3 Equivalent | Hard Chrome Plated | Quenching hardness 50–55HRC Coating hardness 750HV– | E-GJP | E-GJP | E-GFP | |||
| ③ | SKS3 Equivalent | - | - | E-BJP | E-BJP | E-BFP | |||
| ④ | SUS304 Equivalent | - | - | E-SJP | E-SJP | E-SFP | |||
| ⑤ | SUS304 Equivalent | Hard Chrome Plated | Coating hardness 750HV or more | E-HJP | E-HJP | E-HFP | |||
| ⑥ | SUS440C Equivalent | - | Quenching hardness 50 to 55HRC | E-CJP | E-CJP | E-CFP | |||
Specifications Overview
■ Precision Reference
D dimension tolerance table
| D | m7 | p7 |
| 2 | +0.012 +0.002 | +0.018 +0.009 |
| 3 | ||
| 4 | +0.016 +0.004 | +0.024 +0.012 |
| 5 | ||
| 6 | ||
| 8 | +0.021 +0.006 | +0.030 +0.015 |
| 10 | ||
| 12 | +0.025 +0.007 | +0.036 +0.018 |
| 13 | ||
| 16 | ||
| 20 | +0.029 +0.008 | +0.043 +0.022 |
P Dimension Tolerance Table
| P | h7 |
| 1.50 to 3.00 | 0 -0.010 |
| 3.01 to 6.00 | 0 -0.012 |
| 6.01 to 10.00 | 0 -0.015 |
| 10.01 to 18.00 | 0 -0.018 |
| 18.01 to 30.00 | 0 -0.021 |
Specification Table
| Part Number |  P |  L |  B | ℓ | C | ||||||||
 Type |  D tolerance |  D | D dimension tolerance | P·L·B Specified Type (Specified unit: 0.01 mm) | P Size Specified Type (0.01 mm increments) | P Size Fixed Type (Select) | P·L·B Specified Type (Specified unit: 1 mm) | P Size Specified Type / P Size Fixed Type | P·L·B Specified Type (Can be specified down to 0.1 mm increments) | P Size Specified Type/ P Size Fixed Type | |||
| m7 | p7 | ||||||||||||
| P Size Fixed Type E-JP E-GJP E-BJP E-SJP E-HJP E-CJP P Size Specification Type E-JP E-GJP E-BJP E-SJP E-HJP E-CJP P·L·B Specified Type E-FP E-GFP E-BFP E-SFP E-HFP E-CFP | DA(m7) DPA(p7) DC(m7) DPC(p7) | 1 | +0.012 +0.002 | +0.018 +0.009 | 1.50 to 3.00 | 1.50 to 2.50 | 2 | 2·3 | 3 | 2.0 to 5.0 | 2 | 0 | 0.1 |
| 2 | 2.50 to 6.00 | 2.50 to 4.00 | 3 | 2 to 6 | 4 | 2.0 to 15.0 | 0.5 | ||||||
| 3 | 3.50~800 | 3.50 to 6.00 | 5 | 3 to 10 | 5 | 2.0 to 15.0 | 3 | 1 | 1 | ||||
| 4 | +0.016 +0.004 | +0.024 +0.012 | 4.50 to 8.00 | 4.50 to 7.00 | 6·8 | 3 to 14 | 2.0 to 15.0 | ||||||
| 5 | 5.50 to 10.00 | 4.50 to 7.00 | 8 | 5 to 15 | 8 | 2.0 to 15.0 | 4 | ||||||
| 6 | 6.50 to 10.00 | 6.50 to 10.00 | 8·10 | 5 to 15 | 10 | 2.0 to 30.0 | 5 | ||||||
| 8 | +0.021 +0.006 | +0.030 +0.015 | 8.50 to 15.00 | 9.00 to 13.00 | 12 | 5 to 16 | 12 | 2.0 to 30.0 | 6 | 2 | 1.5 | ||
| 10 | 11.00 to 17.00 | 11.00 to 15.00 | 12·14 | 5 to 20 | 16 | 3.0 to 30.0 | 10 | 2 | |||||
| 12 | +0.025 +0.007 | +0.036 +0.018 | 13.00 to 18.00 | 13.00 to 16.00 | 16 | 6 to 24 | 20 | 3.0 to 30.0 | 20 | ||||
| 13 | 14.00 to 20.00 | 14.00 to 18.00 | 18 | 7 to 26 | 22 | 5.0 to 30.0 | 22 | ||||||
| 16 | 17.00 to 27.00 | 17.00 to 25.00 | 25 | 8 to 32 | 24 | 5.0 to 30.0 | 25 | 3 | |||||
| 20 | +0.029 +0.008 | +0.043 +0.022 | 22.00 to 30.00 | 22.00 to 30.00 | 30 | 10 to 40 | 32 | 5.0 to 30.0 | 30 | ||||
Only the P dimension fixed type is available for DA (m7) and DPA (p7)Product Features
Precautions
(1) Dimensional Tolerance and Fit Parameter Table For details, click 
Tolerance and Fit Parameter Table
(2) Reference Table for General Dimensions Without Specified Tolerance (Medium Precision m) For details, clickGeneral Tolerance Overview
Tolerance and Fit Parameter Table(2) Reference Table for General Dimensions Without Specified Tolerance (Medium Precision m) For details, click
General Tolerance OverviewExample of Use
Application Industries
| Lithium battery | Semiconductor | Medical | ||
 |  |  | ||
| Smart phone | Electronic & Electrical Appliances | Robotics | ||
 |  |  |
Related Products
| Bushing for positioning pin Shouldered | Bushing for positioning pin Straight type | Bushing for positioning pin Slotted hole type Shouldered type | ||
 |  |  | ||
| Typical model: JBH6-8 | Typical model: JBA3-8 | Typical Model: JBPE10-P6.8-W4.82-L15 | ||
| Advantages: suitable for applications where it is difficult to adjust the hole depth | Advantages: space-saving | Advantages: absorbs clearance errors |
Related Documents
(1) Positioning technology reference information Click Positioning technology
(2) Surface treatment related rust prevention ability salt spray test reference ClickMetal surface rust prevention ability salt spray test
Positioning technology(2) Surface treatment related rust prevention ability salt spray test reference Click
Metal surface rust prevention ability salt spray testPart Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| E-BFPDC2-P[2.5-6/0.01]-L[2-6/1]-B[2-15/0.1] |
| E-BFPDC3-P[3.5-8/0.01]-L[3-10/1]-B[2-15/0.1] |
| E-BFPDC4-P[4.5-8/0.01]-L[3-14/1]-B[2-15/0.1] |
| E-BFPDC5-P[5.5-10/0.01]-L[5-15/1]-B[2-15/0.1] |
| E-BFPDC6-P[6.5-10/0.01]-L[5-15/1]-B[2-30/0.1] |
| E-BFPDC8-P[8.5-15/0.01]-L[5-16/1]-B[2-30/0.1] |
| E-BFPDC10-P[11-17/0.01]-L[5-20/1]-B[3-30/0.1] |
| E-BFPDC12-P[13-18/0.01]-L[6-24/1]-B[3-30/0.1] |
| E-BFPDC13-P[14-20/0.01]-L[7-26/1]-B[5-30/0.1] |
| E-BFPDC16-P[17-27/0.01]-L[8-32/1]-B[5-30/0.1] |
| E-BFPDC20-P[22-30/0.01]-L[10-40/1]-B[5-30/0.1] |
| E-BFPDPC2-P[2.5-6/0.01]-L[2-6/1]-B[2-15/0.1] |
| E-BFPDPC3-P[3.5-8/0.01]-L[3-10/1]-B[2-15/0.1] |
| E-BFPDPC4-P[4.5-8/0.01]-L[3-14/1]-B[2-15/0.1] |
| E-BFPDPC5-P[5.5-10/0.01]-L[5-15/1]-B[2-15/0.1] |
| E-BFPDPC6-P[6.5-10/0.01]-L[5-15/1]-B[2-30/0.1] |
| E-BFPDPC8-P[8.5-15/0.01]-L[5-16/1]-B[2-30/0.1] |
| E-BFPDPC10-P[11-17/0.01]-L[5-20/1]-B[3-30/0.1] |
| E-BFPDPC12-P[13-18/0.01]-L[6-24/1]-B[3-30/0.1] |
| E-BFPDPC13-P[14-20/0.01]-L[7-26/1]-B[5-30/0.1] |
| E-BFPDPC16-P[17-27/0.01]-L[8-32/1]-B[5-30/0.1] |
| E-BFPDPC20-P[22-30/0.01]-L[10-40/1]-B[5-30/0.1] |
| E-BJPDA2-3 |
| E-BJPDA3-5 |
| E-BJPDA4-[6,8] |
| E-BJPDA5-8 |
| E-BJPDA6-[8,10] |
| E-BJPDA8-12 |
| E-BJPDA10-[12,14] |
| E-BJPDA12-16 |
| E-BJPDA13-18 |
| E-BJPDA16-25 |
| E-BJPDA20-30 |
| E-BJPDC2-[2.5-4/0.01] |
| E-BJPDC3-[3.5-6/0.01] |
| E-BJPDC4-[4.5-7/0.01] |
| E-BJPDC5-[5.5-8/0.01] |
| E-BJPDC6-[6.5-10/0.01] |
| E-BJPDC8-[9-13/0.01] |
| E-BJPDC10-[11-15/0.01] |
| E-BJPDC12-[13-16/0.01] |
| E-BJPDC13-[14-18/0.01] |
| E-BJPDC16-[17-25/0.01] |
| E-BJPDC20-[22-30/0.01] |
| E-BJPDPA2-3 |
| E-BJPDPA3-5 |
| E-BJPDPA4-[6,8] |
| E-BJPDPA5-8 |
| E-BJPDPA6-[8,10] |
| E-BJPDPA8-12 |
| E-BJPDPA10-[12,14] |
| E-BJPDPA12-16 |
| E-BJPDPA13-18 |
| E-BJPDPA16-25 |
| E-BJPDPA20-30 |
| E-BJPDPC2-[2.5-4/0.01] |
| E-BJPDPC3-[3.5-6/0.01] |
| E-BJPDPC4-[4.5-7/0.01] |
| E-BJPDPC5-[5.5-8/0.01] |
| E-BJPDPC6-[6.5-10/0.01] |
| E-BJPDPC8-[9-13/0.01] |
| E-BJPDPC10-[11-15/0.01] |
| E-BJPDPC12-[13-16/0.01] |
| E-BJPDPC13-[14-18/0.01] |
| E-BJPDPC16-[17-25/0.01] |
| E-BJPDPC20-[22-30/0.01] |
| E-CFPDC2-P[2.5-6/0.01]-L[2-6/1]-B[2-15/0.1] |
| E-CFPDC3-P[3.5-8/0.01]-L[3-10/1]-B[2-15/0.1] |
| E-CFPDC4-P[4.5-8/0.01]-L[3-14/1]-B[2-15/0.1] |
| E-CFPDC5-P[5.5-10/0.01]-L[5-15/1]-B[2-15/0.1] |
| E-CFPDC6-P[6.5-10/0.01]-L[5-15/1]-B[2-30/0.1] |
| E-CFPDC8-P[8.5-15/0.01]-L[5-16/1]-B[2-30/0.1] |
| E-CFPDC10-P[11-17/0.01]-L[5-20/1]-B[3-30/0.1] |
| E-CFPDC12-P[13-18/0.01]-L[6-24/1]-B[3-30/0.1] |
| E-CFPDC13-P[14-20/0.01]-L[7-26/1]-B[5-30/0.1] |
| E-CFPDC16-P[17-27/0.01]-L[8-32/1]-B[5-30/0.1] |
| E-CFPDC20-P[22-30/0.01]-L[10-40/1]-B[5-30/0.1] |
| E-CFPDPC2-P[2.5-6/0.01]-L[2-6/1]-B[2-15/0.1] |
| E-CFPDPC3-P[3.5-8/0.01]-L[3-10/1]-B[2-15/0.1] |
| E-CFPDPC4-P[4.5-8/0.01]-L[3-14/1]-B[2-15/0.1] |
| E-CFPDPC5-P[5.5-10/0.01]-L[5-15/1]-B[2-15/0.1] |
| E-CFPDPC6-P[6.5-10/0.01]-L[5-15/1]-B[2-30/0.1] |
| E-CFPDPC8-P[8.5-15/0.01]-L[5-16/1]-B[2-30/0.1] |
| E-CFPDPC10-P[11-17/0.01]-L[5-20/1]-B[3-30/0.1] |
| E-CFPDPC12-P[13-18/0.01]-L[6-24/1]-B[3-30/0.1] |
| E-CFPDPC13-P[14-20/0.01]-L[7-26/1]-B[5-30/0.1] |
| E-CFPDPC16-P[17-27/0.01]-L[8-32/1]-B[5-30/0.1] |
| E-CFPDPC20-P[22-30/0.01]-L[10-40/1]-B[5-30/0.1] |
| E-CJPDA2-3 |
| E-CJPDA3-5 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Surface Treatment | Heat Treatment | Steel Type | Stainless Steel Type | Locating Side Outer Dia. P (Ø) (mm) | Mounting Side Outer Dia. D (mm) | Mounting Section Length L (mm) | Positioning Part Length B (mm) | Dimension Configurable Type | Application | Shouldered | Mounting Side Tolerance | Installation Part Length L (mm) | Length of Positioning Portion B (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | 7 Day(s) | Not Provided | Not Provided | [SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel) | - | 2.5 ～ 6 | 2 | - | - | P, L, B Configurable | - | - | m7 | 2 ～ 6 | 2 ～ 15 | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Not Provided | [SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel) | - | 3.5 ～ 8 | 3 | - | - | P, L, B Configurable | - | - | m7 | 3 ～ 10 | 2 ～ 15 | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Not Provided | [SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel) | - | 4.5 ～ 8 | 4 | - | - | P, L, B Configurable | - | - | m7 | 3 ～ 14 | 2 ～ 15 | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Not Provided | [SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel) | - | 5.5 ～ 10 | 5 | - | - | P, L, B Configurable | - | - | m7 | 5 ～ 15 | 2 ～ 15 | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Not Provided | [SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel) | - | 6.5 ～ 10 | 6 | - | - | P, L, B Configurable | - | - | m7 | 5 ～ 15 | 2 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Not Provided | [SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel) | - | 8.5 ～ 15 | 8 | - | - | P, L, B Configurable | - | - | m7 | 5 ～ 16 | 2 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Not Provided | [SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel) | - | 11 ～ 17 | 10 | - | - | P, L, B Configurable | - | - | m7 | 5 ～ 20 | 3 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Not Provided | [SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel) | - | 13 ～ 18 | 12 | - | - | P, L, B Configurable | - | - | m7 | 6 ～ 24 | 3 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Not Provided | [SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel) | - | 14 ～ 20 | 13 | - | - | P, L, B Configurable | - | - | m7 | 7 ～ 26 | 5 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Not Provided | [SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel) | - | 17 ～ 27 | 16 | - | - | P, L, B Configurable | - | - | m7 | 8 ～ 32 | 5 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Not Provided | [SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel) | - | 22 ～ 30 | 20 | - | - | P, L, B Configurable | - | - | m7 | 10 ～ 40 | 5 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Not Provided | [SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel) | - | 2.5 ～ 6 | 2 | - | - | P, L, B Configurable | - | - | p7 | 2 ～ 6 | 2 ～ 15 | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Not Provided | [SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel) | - | 3.5 ～ 8 | 3 | - | - | P, L, B Configurable | - | - | p7 | 3 ～ 10 | 2 ～ 15 | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Not Provided | [SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel) | - | 4.5 ～ 8 | 4 | - | - | P, L, B Configurable | - | - | p7 | 3 ～ 14 | 2 ～ 15 | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Not Provided | [SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel) | - | 5.5 ～ 10 | 5 | - | - | P, L, B Configurable | - | - | p7 | 5 ～ 15 | 2 ～ 15 | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Not Provided | [SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel) | - | 6.5 ～ 10 | 6 | - | - | P, L, B Configurable | - | - | p7 | 5 ～ 15 | 2 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Not Provided | [SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel) | - | 8.5 ～ 15 | 8 | - | - | P, L, B Configurable | - | - | p7 | 5 ～ 16 | 2 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Not Provided | [SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel) | - | 11 ～ 17 | 10 | - | - | P, L, B Configurable | - | - | p7 | 5 ～ 20 | 3 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Not Provided | [SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel) | - | 13 ～ 18 | 12 | - | - | P, L, B Configurable | - | - | p7 | 6 ～ 24 | 3 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Not Provided | [SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel) | - | 14 ～ 20 | 13 | - | - | P, L, B Configurable | - | - | p7 | 7 ～ 26 | 5 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Not Provided | [SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel) | - | 17 ～ 27 | 16 | - | - | P, L, B Configurable | - | - | p7 | 8 ～ 32 | 5 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Not Provided | [SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel) | - | 22 ～ 30 | 20 | - | - | P, L, B Configurable | - | - | p7 | 10 ～ 40 | 5 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Not Provided | [SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel) | - | 3 | 2 | 4 | 2 | P Fixed | - | - | m7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Not Provided | [SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel) | - | 5 | 3 | 5 | 3 | P Fixed | - | - | m7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Not Provided | [SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel) | - | 6 ～ 8 | 4 | 5 | 3 | P Fixed | - | - | m7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Not Provided | [SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel) | - | 8 | 5 | 8 | 4 | P Fixed | - | - | m7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Not Provided | [SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel) | - | 8 ～ 10 | 6 | 10 | 5 | P Fixed | - | - | m7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Not Provided | [SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel) | - | 12 | 8 | 12 | 6 | P Fixed | - | - | m7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Not Provided | [SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel) | - | 12 ～ 14 | 10 | 16 | 10 | P Fixed | - | - | m7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Not Provided | [SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel) | - | 16 | 12 | 20 | 20 | P Fixed | - | - | m7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Not Provided | [SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel) | - | 18 | 13 | 22 | 22 | P Fixed | - | - | m7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Not Provided | [SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel) | - | 25 | 16 | 24 | 25 | P Fixed | - | - | m7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Not Provided | [SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel) | - | 30 | 20 | 32 | 30 | P Fixed | - | - | m7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Not Provided | [SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel) | - | 2.5 ～ 4 | 2 | 4 | 2 | P Configurable | Standard Shape | Not Provided | m7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Not Provided | [SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel) | - | 3.5 ～ 6 | 3 | 5 | 3 | P Configurable | Standard Shape | Not Provided | m7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Not Provided | [SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel) | - | 4.5 ～ 7 | 4 | 5 | 3 | P Configurable | Standard Shape | Not Provided | m7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Not Provided | [SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel) | - | 5.5 ～ 8 | 5 | 8 | 4 | P Configurable | Standard Shape | Not Provided | m7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Not Provided | [SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel) | - | 6.5 ～ 10 | 6 | 10 | 5 | P Configurable | Standard Shape | Not Provided | m7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Not Provided | [SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel) | - | 9 ～ 13 | 8 | 12 | 6 | P Configurable | Standard Shape | Not Provided | m7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Not Provided | [SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel) | - | 11 ～ 15 | 10 | 16 | 10 | P Configurable | Standard Shape | Not Provided | m7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Not Provided | [SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel) | - | 13 ～ 16 | 12 | 20 | 20 | P Configurable | Standard Shape | Not Provided | m7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Not Provided | [SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel) | - | 14 ～ 18 | 13 | 22 | 22 | P Configurable | Standard Shape | Not Provided | m7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Not Provided | [SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel) | - | 17 ～ 25 | 16 | 24 | 25 | P Configurable | Standard Shape | Not Provided | m7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Not Provided | [SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel) | - | 22 ～ 30 | 20 | 32 | 30 | P Configurable | Standard Shape | Not Provided | m7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Not Provided | [SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel) | - | 3 | 2 | 4 | 2 | P Fixed | - | - | p7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Not Provided | [SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel) | - | 5 | 3 | 5 | 3 | P Fixed | - | - | p7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Not Provided | [SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel) | - | 6 ～ 8 | 4 | 5 | 3 | P Fixed | - | - | p7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Not Provided | [SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel) | - | 8 | 5 | 8 | 4 | P Fixed | - | - | p7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Not Provided | [SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel) | - | 8 ～ 10 | 6 | 10 | 5 | P Fixed | - | - | p7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Not Provided | [SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel) | - | 12 | 8 | 12 | 6 | P Fixed | - | - | p7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Not Provided | [SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel) | - | 12 ～ 14 | 10 | 16 | 10 | P Fixed | - | - | p7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Not Provided | [SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel) | - | 16 | 12 | 20 | 20 | P Fixed | - | - | p7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Not Provided | [SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel) | - | 18 | 13 | 22 | 22 | P Fixed | - | - | p7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Not Provided | [SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel) | - | 25 | 16 | 24 | 25 | P Fixed | - | - | p7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Not Provided | [SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel) | - | 30 | 20 | 32 | 30 | P Fixed | - | - | p7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Not Provided | [SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel) | - | 2.5 ～ 4 | 2 | 4 | 2 | P Configurable | Standard Shape | Not Provided | p7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Not Provided | [SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel) | - | 3.5 ～ 6 | 3 | 5 | 3 | P Configurable | Standard Shape | Not Provided | p7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Not Provided | [SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel) | - | 4.5 ～ 7 | 4 | 5 | 3 | P Configurable | Standard Shape | Not Provided | p7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Not Provided | [SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel) | - | 5.5 ～ 8 | 5 | 8 | 4 | P Configurable | Standard Shape | Not Provided | p7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Not Provided | [SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel) | - | 6.5 ～ 10 | 6 | 10 | 5 | P Configurable | Standard Shape | Not Provided | p7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Not Provided | [SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel) | - | 9 ～ 13 | 8 | 12 | 6 | P Configurable | Standard Shape | Not Provided | p7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Not Provided | [SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel) | - | 11 ～ 15 | 10 | 16 | 10 | P Configurable | Standard Shape | Not Provided | p7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Not Provided | [SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel) | - | 13 ～ 16 | 12 | 20 | 20 | P Configurable | Standard Shape | Not Provided | p7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Not Provided | [SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel) | - | 14 ～ 18 | 13 | 22 | 22 | P Configurable | Standard Shape | Not Provided | p7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Not Provided | [SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel) | - | 17 ～ 25 | 16 | 24 | 25 | P Configurable | Standard Shape | Not Provided | p7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Not Provided | [SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel) | - | 22 ～ 30 | 20 | 32 | 30 | P Configurable | Standard Shape | Not Provided | p7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 2.5 ～ 6 | 2 | - | - | P, L, B Configurable | - | - | m7 | 2 ～ 6 | 2 ～ 15 | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 3.5 ～ 8 | 3 | - | - | P, L, B Configurable | - | - | m7 | 3 ～ 10 | 2 ～ 15 | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 4.5 ～ 8 | 4 | - | - | P, L, B Configurable | - | - | m7 | 3 ～ 14 | 2 ～ 15 | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 5.5 ～ 10 | 5 | - | - | P, L, B Configurable | - | - | m7 | 5 ～ 15 | 2 ～ 15 | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 6.5 ～ 10 | 6 | - | - | P, L, B Configurable | - | - | m7 | 5 ～ 15 | 2 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 8.5 ～ 15 | 8 | - | - | P, L, B Configurable | - | - | m7 | 5 ～ 16 | 2 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 11 ～ 17 | 10 | - | - | P, L, B Configurable | - | - | m7 | 5 ～ 20 | 3 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 13 ～ 18 | 12 | - | - | P, L, B Configurable | - | - | m7 | 6 ～ 24 | 3 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 14 ～ 20 | 13 | - | - | P, L, B Configurable | - | - | m7 | 7 ～ 26 | 5 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 17 ～ 27 | 16 | - | - | P, L, B Configurable | - | - | m7 | 8 ～ 32 | 5 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 22 ～ 30 | 20 | - | - | P, L, B Configurable | - | - | m7 | 10 ～ 40 | 5 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 2.5 ～ 6 | 2 | - | - | P, L, B Configurable | - | - | p7 | 2 ～ 6 | 2 ～ 15 | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 3.5 ～ 8 | 3 | - | - | P, L, B Configurable | - | - | p7 | 3 ～ 10 | 2 ～ 15 | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 4.5 ～ 8 | 4 | - | - | P, L, B Configurable | - | - | p7 | 3 ～ 14 | 2 ～ 15 | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 5.5 ～ 10 | 5 | - | - | P, L, B Configurable | - | - | p7 | 5 ～ 15 | 2 ～ 15 | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 6.5 ～ 10 | 6 | - | - | P, L, B Configurable | - | - | p7 | 5 ～ 15 | 2 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 8.5 ～ 15 | 8 | - | - | P, L, B Configurable | - | - | p7 | 5 ～ 16 | 2 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 11 ～ 17 | 10 | - | - | P, L, B Configurable | - | - | p7 | 5 ～ 20 | 3 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 13 ～ 18 | 12 | - | - | P, L, B Configurable | - | - | p7 | 6 ～ 24 | 3 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 14 ～ 20 | 13 | - | - | P, L, B Configurable | - | - | p7 | 7 ～ 26 | 5 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 17 ～ 27 | 16 | - | - | P, L, B Configurable | - | - | p7 | 8 ～ 32 | 5 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 22 ～ 30 | 20 | - | - | P, L, B Configurable | - | - | p7 | 10 ～ 40 | 5 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 3 | 2 | 4 | 2 | P Fixed | - | - | m7 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 5 | 3 | 5 | 3 | P Fixed | - | - | m7 | - | - |
Loading...
Basic Information
| Basic Shape | Large Head | Insertion Guide Tip Shape | Round | Insertion Guide Tip Type | Flat |
|---|---|---|---|---|---|
| Insertion Guide Specifications | Not Provided | Mounting Side Shape | Straight (Press-Fit) | Locating Side O.D. Tolerance | h7 |
Specification/Dimensions
-
Surface Treatment
- Not Provided
- Hard Chrome Plating
-
Heat Treatment
- Not Provided
- Dip Quenching
-
Steel Type
- SKS3
- SKS3
-
Stainless Steel Type
- SUS304
- SUS440C
- SUS304
-
Locating Side Outer Dia. P (Ø)(mm)
-
Mounting Side Outer Dia. D(mm)
-
Mounting Section Length L(mm)
-
Positioning Part Length B(mm)
-
Dimension Configurable Type
- P Configurable
- P Fixed
- P Selectable
- P, L, B Configurable
-
Application
- Standard Shape
-
Shouldered
- Not Provided
-
Mounting Side Tolerance
-
Installation Part Length L(mm)
-
Length of Positioning Portion B(mm)
-
type
- E-BFPDC
- E-BFPDPC
- E-BJPDA
- E-BJPDC
- E-BJPDPA
- E-BJPDPC
- E-CFPDC
- E-CFPDPC
- E-CJPDA
- E-CJPDC
- E-CJPDPA
- E-CJPDPC
- E-FPDC
- E-FPDPC
- E-GFPDC
- E-GFPDPC
- E-GJPDA
- E-GJPDC
- E-GJPDPA
- E-GJPDPC
- E-HFPDC
- E-HFPDPC
- E-HJPDA
- E-HJPDC
- E-HJPDPA
- E-HJPDPC
- E-JPDA
- E-JPDC
- E-JPDPA
- E-JPDPC
- E-SFPDC
- E-SFPDPC
- E-SJPDA
- E-SJPDC
- E-SJPDPA
- E-SJPDPC
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 7 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Feed Pins - Shouldered - Tapped
- Locating Pins - Small Head, Round Tapered - Threaded
- Locating Pins for Height Adjusting - Small Head Press Fit
- Locating Pins - Large Head, Tapered - Nonmagnetic - Threaded
- Locating Pins - Straight, Sphere (Press Fit)
- Locating Pins-High Hardness Stainless Steel/R/Taper R/Press Fit
- Locating Pins-High Hardness Stainless Steel/R/Taper R/Threaded
- Flex Locator, Center Fixed (Taper Pin)
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy