[Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
[Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

[Clean & Pack] Thin Bracket - 6 Series, 8mm Slot (SL-HBLSD6-SSU)

Volume Discount

Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.

■ Part Number for Clean & Pack Products

· Degreasing (Anti-rust single packing)	: Part Number SL-□□
· Precision cleaning (Degassing double packing)	: Part Number SH-□□
· Electrolytic polishing + precision cleaning (Degassing double packing)	: Part Number SHD-□□

Product Part Number	Cleaning Method	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Process
SL-□□	Degreasing	Anti-rust packing	Oil removal	General environment	Regular assembly process
					Post battery assembly process
SH-□□	Precision cleaning	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
					LCD-related post assembly process
					In-vehicle camera assembly process
SHD-□□	Electrolytic polishing + precision cleaning	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
					Liquid crystal deposition process
					Pre-OLED process

■ Notes
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.

Thin Extruded Brackets with space saving design. Alterations on hole positions are available.

(i)Caution

Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.

Part Number

Configured Part Number is shown.

SL-HBLSD6-SSU

Drawing/Specifications
3D Preview
Part Numbers
More Information

For 30 Square

For 60 Square

For 50 Square

For 90 Square

Thin Brackets For 6 Series (Slot Width 8 mm): Related Image

[ ! ] For SL-HBLSD6 and SH-HBLSD6, the hole position can be changed as the Alteration.

Part Number				[ M ] Material	[ S ] Surface treatment	Cleaning Method
For 30 Square	For 50 Square	For 60 Square	For 90 Square	[ M ] Material	[ S ] Surface treatment	Cleaning Method	Cleaning Environment	Packaging Type	Packing Environment
SL-HBLSS6	SL-HBLSD6-50	SL-HBLSD6	SL-HBLST6	A6N01SS−T5	Anodize	Degreasing	General environment	Anti-rust packing	General environment
SH-HBLSS6	SH-HBLSD6-50	SH-HBLSD6	SH-HBLST6		Anodize	Precision cleaning	Class 1,000	Degassing double packing	Class 10
SL-HBLSSB6	—	SL-HBLSDB6	—		Black Anodize	Degreasing	General environment	Anti-rust packing	General environment
SH-HBLSSB6	—	SH-HBLSDB6	—		Black Anodize	Precision cleaning	Class 1,000	Degassing double packing	Class 10

[!] Products are packed by order quantity. Ex. If the order is for 20 pieces, they are packed in one package (incl. 20 pieces).
[!] See the details of degreasing, precision cleaning, and electrolytic polishing shown at the bottom of the

specification table.

Specification Table

Part Number

SL-HBLSS6

Part Number	Mass	Applicable Screw, T Nut				Allowable Load
	(g)					(N)
		Bolt	Quantity	T Nut	Quantity
SL-HBLSS6	14	SCB6-12	2	HNTTSN6-6	2	980
SH-HBLSS6
SL-HBLSSB6^*
SH-HBLSSB6^*
SL-HBLSD6	35		4		4	1568
SH-HBLSD6
SL-HBLSDB6^*
SH-HBLSDB6^*
SL-HBLSD6-50	28		4		4	1568
SH-HBLSD6-50
SL-HBLST6	56		6		6	2352
SH-HBLST6

Alterations

Part Number	—	(P·SST·SSU·SSP)
SL-HBLSD6	—	P
SL-HBLSS6	—	SST
SL-HBLSD6	—	P-SST

Alterations

Code

Spec.

Applicable Bracket

Applicable Bolts
and Nuts Set

SST
(Stainless Steel)
SSU
(Pre-Assembly Insertion
Spring Nut
Stainless Steel)
SSP
(Post-Assembly Insertion
Spring Nut
Stainless Steel)

Applicable bolts and nuts for fixing the brackets on extrusions come in a set.
　
(Example) When HBLSS6 is specified

	Bolt		Nut
Code	Part Number	Quantity	Part Number	Quantity
SST	SCB6－12	2	HNTTSN6－6	2
SSU	SCB6－12		SHNTU6－6
SSP	SCB6－12		SHNTP6－6

[ ! ] When specifying other than HBLSS6, check for the applicable bolts and nuts.
　

—

HBLSS6

HBLSSB6

HBLSD6

HBLSDB6

HBLST6

HBLSD6－50

HBLSP6

HBLBL6

[ ! ] Screws for black anodized brackets are made of HCBMTB (Trivalent Chromate Black).
[ ! ] The part numbers are those of the products before cleaning.

Alterations	Code	Spec.	Applicable Bracket
Thin Brackets Hole Position Change	P	Thin Brackets Changes the screw-mounting hole positions for HBLSD6.	HBLSD6

Alteration Details

■Set of applicable Screws and Nuts Details

Alteration part number	Bolt		Nut
Alteration part number	Part Number	Material	Type	Part Number	Material	Stopper
SST	SCB6-12	Stainless Steel	Pre-Assembly	HNTTSN6-6	Stainless Steel	None
SSU	SCB6-12	Stainless Steel	Pre-Assembly	SHNTU6-6	Stainless Steel	Provided
SSP	SCB6-12	Stainless Steel	Post-Assembly	SHNTP6-6	Stainless Steel	Provided

■Thin Brackets Hole Position Alteration Type (-P)

Changes the screw-mounting hole position for Thin Brackets.
Hole position change supported: HBLSD6 (2-Hole Type) only

Point!
(1) Since the screws do not interfere with each other, each of the bracket side faces can be easily assembled vertically with the mating extrusion side face through the extrusion slot.
　

(2) Low cost and thin bracket have achieved space saving of installation areas.
　

Technical Information

■How to Specify Allowable Load of Bracket

This represents the allowable load per bracket for the extrusion assembly structured by bridging a beam extrusion between two vertical extrusions and then, attaching a bracket just below the bottom face of each end of the beam extrusion.
Allowable Load here means the load under which the bracket can stays at its position (without fracturing or sliding), after all of its mounting holes are fixed with screws.

■ Perpendicularity

Perpendicularity of Extruded Brackets is manufactured within ±1° tolerance based on JIS Standard H4100 Special Grade.

■Mechanical Properties of Aluminum Extrusions (JIS Standard Reference)

Material (JIS Symbol)	A6N01SS-T5
Tensile Strength (N/mm²)	245 or more
Yield Stress (N/mm²)	205 or more
Young's Modulus (N/mm²)	69972
Brinell Hardness (HB)	88
Surface Treatment	Anodize 9 µm or more

Cleaning Process

· Degreasing (Part Number: SL-□□)

* Stainless steel products may be used with alkaline hot pure water. There is no change in cleanliness.
* If the surface treatment is low-temperature black chrome plating, IPA cleaning will be applied.

Working Environment: General environment
Hydrocarbon cleaning Ro water cleaning Neutral Detergent Cleaning		High-pressure jet washing (Ro water) followed by pure water cleaning		Oil-free Compressor Used		Anti-rust single packing

· Precision cleaning (Part Number: SH-□□)

				Working Environment: Class 1,000				Working Environment: Class 10
Hydrocarbon cleaning Ro water cleaning Neutral Detergent Cleaning		High-pressure jet washing (Ro water) followed by pure water (10 MΩ·cm) cleaning		Use pure water (13 MΩ·cm)		Use nitrogen blow		Conducted on a clean bench in a Class 10 clean environment

· Electrolytic polishing + precision cleaning (Part Number: SHD-□□)

						Working Environment: Class 1,000				Working Environment: Class 10
Hydrocarbon cleaning Ro water cleaning Neutral Detergent Cleaning		Electrolytic polishing with an electrolytic polishing layer according to the material		High-pressure jet washing (Ro water) followed by pure water (10 MΩ·cm) cleaning		Use warm pure water (13 MΩ·cm)		Use nitrogen blow		Conducted on a clean bench in a Class 10 clean environment

Packaging Example

For degreasing:
(Part Number: SL-□□)

Depending on some products and dimensions,
packaging type may vary.

For precision cleaning or electrolytic polishing + precision cleaning:
(Part Number: SH-□□/SHD-□□)

[ ! ] Both the first and second layer packaging are degassed.

Cleaning Effectiveness / Recommended Environment for Use

Cleaning Method	Product Part Number	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Use Case and Process
Degreasing	SL-□□	Anti-rust packing	Oil removal	General environment	Regular assembly process
Degreasing	SL-□□	Anti-rust packing	Oil removal	General environment	Post battery assembly process
Precision cleaning	SH-□□	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
					LCD-related post assembly process
					In-vehicle camera assembly process
Electrolytic polishing + precision cleaning	SHD-□□	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
					Liquid crystal deposition process
					Pre-OLED process

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 45; 60

Part Number
SL-HBLSD6-SSU

Part Number	Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	Compatible Extrusion Width (mm)	Compatible No. of Slots	Cleaning Method	Surface Treatment	Extrusion Size	Bracket Type	Accessory	Number of Extrusion Connection Holes
	MYR 35.01	1 Piece(s)	Available	6 Day(s) or more	60	2 Slots	Degreasing	Anodizing	For 60 × 60	Thin Brackets	SSU (Stainless steel bolt / pre-assembly insertion spring nut set)	4

Specifications / Overview

～For customers who are considering the hole staggered type (HBLSD6-P)～
For fastening the mating sides of aluminum extrusions.
MISUMI's first thin bracket with staggered screw mounting holes

* The following explanation is about the hole-staggered bracket "HBLSD6-P."

Do you have the following issues?

Issue 1	I want to design with a configuration where the 1 slot extrusions are parallel to each other and at a 90-degree angle.
Issue 2	When fastening 2 slots and 1 slot extrusions at a 90-degree angle in parallel, there was a concern that the only way to fasten them was to use a sheet metal plate on the back.
Issue 3	I want to fasten the sides of the extrusions economically and compactly

These issues are solved with Thin Brackets Hole Position Alteration Type.

Solution

Since the screws do not interfere with each other, each of the bracket side faces can be easily assembled vertically with the mating extrusion side face through the extrusion slot.

Solution

Low-cost. Furthermore, the space in the installation area has been saved due to thin brackets.

Product Features

Thin Brackets For 6 Series (Slot Width 8 mm): Related Image

* Using the narrowing down conditions,
select [Bracket: Thin Brackets Hole Position Alteration Type].

Customers’ Opinions

The options for fastening methods have expanded.

The price is cheaper than similar products from other manufacturers, so I would like to purchase it again.

We are satisfied with the thin design, which allows us to fasten clearly.

App. Example

■Features of HBLSD6-P (with "Thin Bracket Hole Position" Alteration applied):
Staggered bolt mounting holes.
Since the screws do not interfere with each other, each of the bracket side faces can be easily assembled vertically with the mating extrusion side face through the extrusion slot.

Basic Information

Bracket Type	Thin Brackets	Environmentally Friendly	RoHS compliant (10 substances)	Properties / applications	Clean washing
Tab Position	Not Tabbed	Perpendicularity	No Standard	Series	MISUMI Brackets for 6 Series (Extrusion Slot Width 8mm)
Material	A6N01SS-T5	Extrusion No.	6	Mounting Hole Alteration for Covers	N/A
Applicable Screws	M6 bolt

Please check the type/dimensions/specifications of the part SL-HBLSD6-SSU in the [Clean & Pack] Thin Bracket - 6 Series, 8mm Slot series.

Configure

1 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

type
- SH-HBLSD6
- SH-HBLSD6-50
- SH-HBLSDB6
- SH-HBLSS6
- SH-HBLSSB6
- SH-HBLST6
- SL-HBLSD6
- SL-HBLSD6-50
- SL-HBLSDB6
- SL-HBLSS6
- SL-HBLSSB6
- SL-HBLST6
Clear
Compatible Extrusion Width(mm)
30

50

60

90
Clear
Compatible No. of Slots
1 Slot

2 Slots

3 Slots
Clear
Cleaning Method
- Degreasing
- Precision Cleaning
Clear
Surface Treatment
- Anodizing
- Black anodizing
Clear
Extrusion Size
- For 30 Square
- For 50 × 50
- For 60 × 60
- For 90 × 90
Clear
Bracket Type
Thin Brackets

Thin BracketsChangeable Hole Position Type
Clear
Accessory
- N/A
- SSP (Stainless steel bolt / post-assembly insertion spring nut set)
- SST (Stainless steel bolt / nut set)
- SSU (Stainless steel bolt / pre-assembly insertion spring nut set)
Clear
Number of Extrusion Connection Holes
- 2
- 4
- 6
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

6 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Products like this...

Part Number
SH-HBLSD6-50-SST
SH-HBLSD6-50-SSU
SH-HBLSD6-P
SL-HBLSDB6
SL-HBLSS6
SL-HBLSS6-SSP

Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	Compatible Extrusion Width (mm)	Compatible No. of Slots	Cleaning Method	Surface Treatment	Extrusion Size	Bracket Type	Accessory	Number of Extrusion Connection Holes
MYR 28.75	1 Piece(s)	Available	6 Day(s) or more	60	2 Slots	Precision Cleaning	Anodizing	For 50 × 50	Thin Brackets	SST (Stainless steel bolt / nut set)	4
MYR 35.45	1 Piece(s)	Available	6 Day(s) or more	50	2 Slots	Precision Cleaning	Anodizing	For 50 × 50	Thin Brackets	SSU (Stainless steel bolt / pre-assembly insertion spring nut set)	4
MYR 21.21	1 Piece(s)	Available	6 Day(s) or more	60	2 Slots	Precision Cleaning	Anodizing	For 60 × 60	Thin BracketsChangeable Hole Position Type	N/A	4
MYR 23.19	1 Piece(s)	Available	6 Day(s) or more	60	2 Slots	Degreasing	Black anodizing	For 60 × 60	Thin Brackets	N/A	4
MYR 16.82	1 Piece(s)	Available	6 Day(s) or more	30	1 Slot	Degreasing	Anodizing	For 30 Square	Thin Brackets	N/A	2
MYR 23.03	1 Piece(s)	Available	6 Day(s) or more	30	1 Slot	Degreasing	Anodizing	For 30 Square	Thin Brackets	SSP (Stainless steel bolt / post-assembly insertion spring nut set)	2

Additional Products in this Category

Tech Support

: Technical Inquiry

How can we improve?

[Clean & Pack] Thin Bracket - 6 Series, 8mm Slot (SL-HBLSD6-SSU)

(i)Caution

Specification Table

Alterations

Alteration Details

Technical Information

Part Number

Specifications / Overview

Product Features

App. Example

Basic Information

Configure

Specification/Dimensions

type

Compatible Extrusion Width(mm)

Compatible No. of Slots

Cleaning Method

Surface Treatment

Extrusion Size

Bracket Type

Accessory

Number of Extrusion Connection Holes

CAD

Days to Ship

Specify Alterations

Products like this...

Additional Products in this Category

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm