[Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Locating Pin Straight Taper Type, Press-Fit Type (Part Numbers)

MISUMI

MiSUMi Economy

MISUMI

Part Number

Configured Part Number is shown.

Drawing/Specifications
3D Preview
Part Numbers

Product Overview

The positioning pin is used for the spatial positioning in the directions of X and Y axes, mainly using the workpiece hole as the positioning benchmark or used in conjunction with bushings, in which the straight rod cone head type is simple in shape, easy to install, and widely used.

Dimensional Drawing

Usage outline of straight rod tapered angle type positioning pins Locating Pins

■Material Specification Table

Material No.	Material	Surface Treatment	Hardness	Type
Material No.	Material	Surface Treatment	Hardness	Standard
①	SKS3 Equivalent	-	Quenching hardness 60 to 63HRC	E-LPSTA
②	SKS3 Equivalent	Hard Chrome Plated	Quenching hardness 50–55HRC Coating hardness 750HV–	E-GLPSTA
③	SKS3 Equivalent	-	-	E-BLPSTA
④	SUS304 Equivalent	-	-	E-SLPSTA
⑤	SUS304 Equivalent	Hard Chrome Plated	Coating hardness 750HV or more	E-HLPSTA
⑥	SUS440C Equivalent	-	Quenching hardness 50 to 55HRC	E-CLPSTA

The D section of martensitic stainless steel has an identification groove.

If there are requirements for rust prevention, give priority to products with hard chrome plating or made of austenitic stainless steel.

Specifications Overview

■Tolerance Selection Type

D	Normal
	M	P	G	H
	m7	p7	g7	h7
1 to 3	+0.012 +0.002	+0.018 +0.009	-0.003 -0.012	0 -0.010
4 to 6	+0.016 +0.004	+0.024 +0.012	-0.004 -0.016	0 -0.012
8·10	+0.021 +0.006	+0.030 +0.015	-0.005 -0.020	0 -0.015

D-2EtanA ≥ 0.73 (Front end diameter ⌀0.73 or above)

Reference tan15° ≈0.267 tan30° ≈0.577 tan45° ≈1 tan60° ≈1.732

Specification Table

Part Number			L Can be specified down to 0.1 mm increments	E Can be specified down to 0.1 mm increments	A Selection	C
Type	D tolerance	D	Standard			Standard
Internal Thread Type E-LPSTA E-GLPSTA E-BLPSTA E-SLPSTA E-HLPSTA E-CLPSTA	M(m7) P(p7) G(g7) H(h7)	2	3.0 to 20.0	0.5 to 10.0	15 30 45 60	0.5
		3
		4	3.0 to 25.0			1
		5	4.0 to 30.0
		6	5.0 to 40.0
		8	5.0 to 40.0			1.5
		10				2

Product Features

Feature 1: Standard type with cone head. Rod diameter tolerance that can be specified for the press-fit type: m7, p7, g7, h7.
Feature 2: Mounting methods include press-fit type and internal thread type, offering a variety of installation options.
Feature 3: Optional Material: Iron (alloy tool steel or bearing steel); Stainless Steel (austenitic stainless steel, martensitic stainless steel), suitable for positioning of a variety of workpieces.
Feature 4: Hard chrome plated surface, effectively ensuring surface hardness and antirust.
Feature 5: Multiple cone tip angles available, with a wide range of specifications, suitable for installation and positioning in various working conditions.
Feature 6: The installation space is small, and the straight rod cone head type positioning pin is more suitable for simple lateral positioning.

Precautions

(1) Dimensional Tolerance and Fit Parameter Table For details, click

Tolerance and Fit Parameter Table
(2) Reference Table for Unmarked Tolerance General Dimensions (Medium Precision m) For details, click

General Tolerance Overview
(3) Reference Values for Thread Installation Torque The tightening torque (reference value) is technical data for the

Thread Torque tightening torque strength classification (8.8), with the tightened state maintained for more than 24 hours. Not applicable when using a relaxant or spring washer.

Example of Use

MISUMI Positioning Pin Specifications and Dimensional Drawing Large Head Round

Example introduction: straight rod cone head positioning pin and shouldered bushing in pick and place mechanism
Design summary:
(1) An example of using a swing cylinder to achieve linear and rotary motion through pneumatic drive, and moving a small substrate through a suction cup.
(2) In the case of a long pin, if the air vent is not provided, the pin and bushing are not easy to pull out. It is necessary to provide a air vent on the bushing side or the positioning pin side.
Intended use of fixture bushing:
The axial structure of the swing cylinder can ensure positioning accuracy while saving space through the coordination of positioning pins/shouldered bushings.

For more information, please refer to

case details

Application Industries

Lithium battery	Semiconductor	Medical

Smart phone	Electronic & Electrical Appliances	Robotics

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 60; 90

Part Number
E-BLPSTAG2-L[3-20/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-BLPSTAG3-L[3-20/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-BLPSTAG4-L[3-25/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-BLPSTAG5-L[4-30/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-BLPSTAG6-L[5-40/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-BLPSTAG8-L[5-40/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-BLPSTAG10-L[5-40/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-BLPSTAH2-L[3-20/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-BLPSTAH3-L[3-20/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-BLPSTAH4-L[3-25/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-BLPSTAH5-L[4-30/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-BLPSTAH6-L[5-40/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-BLPSTAH8-L[5-40/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-BLPSTAH10-L[5-40/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-BLPSTAM2-L[3-20/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-BLPSTAM3-L[3-20/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-BLPSTAM4-L[3-25/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-BLPSTAM5-L[4-30/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-BLPSTAM6-L[5-40/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-BLPSTAM8-L[5-40/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-BLPSTAM10-L[5-40/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-BLPSTAP2-L[3-20/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-BLPSTAP3-L[3-20/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-BLPSTAP4-L[3-25/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-BLPSTAP5-L[4-30/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-BLPSTAP6-L[5-40/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-BLPSTAP8-L[5-40/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-BLPSTAP10-L[5-40/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-CLPSTAG2-L[3-20/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-CLPSTAG3-L[3-20/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-CLPSTAG4-L[3-25/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-CLPSTAG5-L[4-30/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-CLPSTAG6-L[5-40/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-CLPSTAG8-L[5-40/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-CLPSTAG10-L[5-40/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-CLPSTAH2-L[3-20/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-CLPSTAH3-L[3-20/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-CLPSTAH4-L[3-25/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-CLPSTAH5-L[4-30/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-CLPSTAH6-L[5-40/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-CLPSTAH8-L[5-40/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-CLPSTAH10-L[5-40/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-CLPSTAM2-L[3-20/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-CLPSTAM3-L[3-20/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-CLPSTAM4-L[3-25/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-CLPSTAM5-L[4-30/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-CLPSTAM6-L[5-40/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-CLPSTAM8-L[5-40/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-CLPSTAM10-L[5-40/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-CLPSTAP2-L[3-20/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-CLPSTAP3-L[3-20/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-CLPSTAP4-L[3-25/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-CLPSTAP5-L[4-30/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-CLPSTAP6-L[5-40/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-CLPSTAP8-L[5-40/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-CLPSTAP10-L[5-40/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-GLPSTAG2-L[3-20/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-GLPSTAG3-L[3-20/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-GLPSTAG4-L[3-25/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-GLPSTAG5-L[4-30/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-GLPSTAG6-L[5-40/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-GLPSTAG8-L[5-40/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-GLPSTAG10-L[5-40/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-GLPSTAH2-L[3-20/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-GLPSTAH3-L[3-20/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-GLPSTAH4-L[3-25/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-GLPSTAH5-L[4-30/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-GLPSTAH6-L[5-40/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-GLPSTAH8-L[5-40/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-GLPSTAH10-L[5-40/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-GLPSTAM2-L[3-20/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-GLPSTAM3-L[3-20/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-GLPSTAM4-L[3-25/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-GLPSTAM5-L[4-30/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-GLPSTAM6-L[5-40/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-GLPSTAM8-L[5-40/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-GLPSTAM10-L[5-40/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-GLPSTAP2-L[3-20/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-GLPSTAP3-L[3-20/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-GLPSTAP4-L[3-25/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-GLPSTAP5-L[4-30/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-GLPSTAP6-L[5-40/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-GLPSTAP8-L[5-40/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-GLPSTAP10-L[5-40/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-HLPSTAG2-L[3-20/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-HLPSTAG3-L[3-20/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-HLPSTAG4-L[3-25/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-HLPSTAG5-L[4-30/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-HLPSTAG6-L[5-40/0.1]-E[0.5-10/0.1]-A[15,30,45,60]
E-HLPSTAG8-L[5-40/0.1]-E[0.5-10/0.1]-A[15,30,45,60]

Standard Unit Price	Minimum order quantity	Days to Ship	Surface Treatment	Heat Treatment	Steel Type	Stainless Steel Type	Locating Side Outer Dia. P (Ø) (mm)	Mounting Side Outer Dia. D (mm)	Taper Length E (mm)	Positioning Side O.D. Tolerance	Mounting Side Tolerance	Installation Part Length L (mm)	A (°)
-	1 Piece(s)	4 Day(s)	Not Provided	Not Provided	[SKS3] Alloy tool steel or bearing steel	-	2	2	0.5 ～ 10	g7	g7	3 ～ 20	15 ～ 60
-	1 Piece(s)	4 Day(s)	Not Provided	Not Provided	[SKS3] Alloy tool steel or bearing steel	-	3	3	0.5 ～ 10	g7	g7	3 ～ 20	15 ～ 60
-	1 Piece(s)	4 Day(s)	Not Provided	Not Provided	[SKS3] Alloy tool steel or bearing steel	-	4	4	0.5 ～ 10	g7	g7	3 ～ 25	15 ～ 60
-	1 Piece(s)	4 Day(s)	Not Provided	Not Provided	[SKS3] Alloy tool steel or bearing steel	-	5	5	0.5 ～ 10	g7	g7	4 ～ 30	15 ～ 60
-	1 Piece(s)	4 Day(s)	Not Provided	Not Provided	[SKS3] Alloy tool steel or bearing steel	-	6	6	0.5 ～ 10	g7	g7	5 ～ 40	15 ～ 60
-	1 Piece(s)	4 Day(s)	Not Provided	Not Provided	[SKS3] Alloy tool steel or bearing steel	-	8	8	0.5 ～ 10	g7	g7	5 ～ 40	15 ～ 60
-	1 Piece(s)	4 Day(s)	Not Provided	Not Provided	[SKS3] Alloy tool steel or bearing steel	-	10	10	0.5 ～ 10	g7	g7	5 ～ 40	15 ～ 60
-	1 Piece(s)	4 Day(s)	Not Provided	Not Provided	[SKS3] Alloy tool steel or bearing steel	-	2	2	0.5 ～ 10	h7	h7	3 ～ 20	15 ～ 60
-	1 Piece(s)	4 Day(s)	Not Provided	Not Provided	[SKS3] Alloy tool steel or bearing steel	-	3	3	0.5 ～ 10	h7	h7	3 ～ 20	15 ～ 60
-	1 Piece(s)	4 Day(s)	Not Provided	Not Provided	[SKS3] Alloy tool steel or bearing steel	-	4	4	0.5 ～ 10	h7	h7	3 ～ 25	15 ～ 60
-	1 Piece(s)	4 Day(s)	Not Provided	Not Provided	[SKS3] Alloy tool steel or bearing steel	-	5	5	0.5 ～ 10	h7	h7	4 ～ 30	15 ～ 60
-	1 Piece(s)	4 Day(s)	Not Provided	Not Provided	[SKS3] Alloy tool steel or bearing steel	-	6	6	0.5 ～ 10	h7	h7	5 ～ 40	15 ～ 60
-	1 Piece(s)	4 Day(s)	Not Provided	Not Provided	[SKS3] Alloy tool steel or bearing steel	-	8	8	0.5 ～ 10	h7	h7	5 ～ 40	15 ～ 60
-	1 Piece(s)	4 Day(s)	Not Provided	Not Provided	[SKS3] Alloy tool steel or bearing steel	-	10	10	0.5 ～ 10	h7	h7	5 ～ 40	15 ～ 60
-	1 Piece(s)	4 Day(s)	Not Provided	Not Provided	[SKS3] Alloy tool steel or bearing steel	-	2	2	0.5 ～ 10	m7	m7	3 ～ 20	15 ～ 60
-	1 Piece(s)	4 Day(s)	Not Provided	Not Provided	[SKS3] Alloy tool steel or bearing steel	-	3	3	0.5 ～ 10	m7	m7	3 ～ 20	15 ～ 60
-	1 Piece(s)	4 Day(s)	Not Provided	Not Provided	[SKS3] Alloy tool steel or bearing steel	-	4	4	0.5 ～ 10	m7	m7	3 ～ 25	15 ～ 60
-	1 Piece(s)	4 Day(s)	Not Provided	Not Provided	[SKS3] Alloy tool steel or bearing steel	-	5	5	0.5 ～ 10	m7	m7	4 ～ 30	15 ～ 60
-	1 Piece(s)	4 Day(s)	Not Provided	Not Provided	[SKS3] Alloy tool steel or bearing steel	-	6	6	0.5 ～ 10	m7	m7	5 ～ 40	15 ～ 60
-	1 Piece(s)	4 Day(s)	Not Provided	Not Provided	[SKS3] Alloy tool steel or bearing steel	-	8	8	0.5 ～ 10	m7	m7	5 ～ 40	15 ～ 60
-	1 Piece(s)	4 Day(s)	Not Provided	Not Provided	[SKS3] Alloy tool steel or bearing steel	-	10	10	0.5 ～ 10	m7	m7	5 ～ 40	15 ～ 60
-	1 Piece(s)	4 Day(s)	Not Provided	Not Provided	[SKS3] Alloy tool steel or bearing steel	-	2	2	0.5 ～ 10	p7	p7	3 ～ 20	15 ～ 60
-	1 Piece(s)	4 Day(s)	Not Provided	Not Provided	[SKS3] Alloy tool steel or bearing steel	-	3	3	0.5 ～ 10	p7	p7	3 ～ 20	15 ～ 60
-	1 Piece(s)	4 Day(s)	Not Provided	Not Provided	[SKS3] Alloy tool steel or bearing steel	-	4	4	0.5 ～ 10	p7	p7	3 ～ 25	15 ～ 60
-	1 Piece(s)	4 Day(s)	Not Provided	Not Provided	[SKS3] Alloy tool steel or bearing steel	-	5	5	0.5 ～ 10	p7	p7	4 ～ 30	15 ～ 60
-	1 Piece(s)	4 Day(s)	Not Provided	Not Provided	[SKS3] Alloy tool steel or bearing steel	-	6	6	0.5 ～ 10	p7	p7	5 ～ 40	15 ～ 60
-	1 Piece(s)	4 Day(s)	Not Provided	Not Provided	[SKS3] Alloy tool steel or bearing steel	-	8	8	0.5 ～ 10	p7	p7	5 ～ 40	15 ～ 60
-	1 Piece(s)	4 Day(s)	Not Provided	Not Provided	[SKS3] Alloy tool steel or bearing steel	-	10	10	0.5 ～ 10	p7	p7	5 ～ 40	15 ～ 60
-	1 Piece(s)	4 Day(s)	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	2	2	0.5 ～ 10	g7	g7	3 ～ 20	15 ～ 60
-	1 Piece(s)	4 Day(s)	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	3	3	0.5 ～ 10	g7	g7	3 ～ 20	15 ～ 60
-	1 Piece(s)	4 Day(s)	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	4	4	0.5 ～ 10	g7	g7	3 ～ 25	15 ～ 60
-	1 Piece(s)	4 Day(s)	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	5	5	0.5 ～ 10	g7	g7	4 ～ 30	15 ～ 60
-	1 Piece(s)	4 Day(s)	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	6	6	0.5 ～ 10	g7	g7	5 ～ 40	15 ～ 60
-	1 Piece(s)	4 Day(s)	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	8	8	0.5 ～ 10	g7	g7	5 ～ 40	15 ～ 60
-	1 Piece(s)	4 Day(s)	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	10	10	0.5 ～ 10	g7	g7	5 ～ 40	15 ～ 60
-	1 Piece(s)	4 Day(s)	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	2	2	0.5 ～ 10	h7	h7	3 ～ 20	15 ～ 60
-	1 Piece(s)	4 Day(s)	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	3	3	0.5 ～ 10	h7	h7	3 ～ 20	15 ～ 60
-	1 Piece(s)	4 Day(s)	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	4	4	0.5 ～ 10	h7	h7	3 ～ 25	15 ～ 60
-	1 Piece(s)	4 Day(s)	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	5	5	0.5 ～ 10	h7	h7	4 ～ 30	15 ～ 60
-	1 Piece(s)	4 Day(s)	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	6	6	0.5 ～ 10	h7	h7	5 ～ 40	15 ～ 60
-	1 Piece(s)	4 Day(s)	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	8	8	0.5 ～ 10	h7	h7	5 ～ 40	15 ～ 60
-	1 Piece(s)	4 Day(s)	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	10	10	0.5 ～ 10	h7	h7	5 ～ 40	15 ～ 60
-	1 Piece(s)	4 Day(s)	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	2	2	0.5 ～ 10	m7	m7	3 ～ 20	15 ～ 60
-	1 Piece(s)	4 Day(s)	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	3	3	0.5 ～ 10	m7	m7	3 ～ 20	15 ～ 60
-	1 Piece(s)	4 Day(s)	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	4	4	0.5 ～ 10	m7	m7	3 ～ 25	15 ～ 60
-	1 Piece(s)	4 Day(s)	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	5	5	0.5 ～ 10	m7	m7	4 ～ 30	15 ～ 60
-	1 Piece(s)	4 Day(s)	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	6	6	0.5 ～ 10	m7	m7	5 ～ 40	15 ～ 60
-	1 Piece(s)	4 Day(s)	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	8	8	0.5 ～ 10	m7	m7	5 ～ 40	15 ～ 60
-	1 Piece(s)	4 Day(s)	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	10	10	0.5 ～ 10	m7	m7	5 ～ 40	15 ～ 60
-	1 Piece(s)	4 Day(s)	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	2	2	0.5 ～ 10	p7	p7	3 ～ 20	15 ～ 60
-	1 Piece(s)	4 Day(s)	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	3	3	0.5 ～ 10	p7	p7	3 ～ 20	15 ～ 60
-	1 Piece(s)	4 Day(s)	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	4	4	0.5 ～ 10	p7	p7	3 ～ 25	15 ～ 60
-	1 Piece(s)	4 Day(s)	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	5	5	0.5 ～ 10	p7	p7	4 ～ 30	15 ～ 60
-	1 Piece(s)	4 Day(s)	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	6	6	0.5 ～ 10	p7	p7	5 ～ 40	15 ～ 60
-	1 Piece(s)	4 Day(s)	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	8	8	0.5 ～ 10	p7	p7	5 ～ 40	15 ～ 60
-	1 Piece(s)	4 Day(s)	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	10	10	0.5 ～ 10	p7	p7	5 ～ 40	15 ～ 60
-	1 Piece(s)	4 Day(s)	[Hard Chrome Plating] Hard Chrome Plating	Dip Quenching	[SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel)	-	2	2	0.5 ～ 10	g7	g7	3 ～ 20	15 ～ 60
-	1 Piece(s)	4 Day(s)	[Hard Chrome Plating] Hard Chrome Plating	Dip Quenching	[SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel)	-	3	3	0.5 ～ 10	g7	g7	3 ～ 20	15 ～ 60
-	1 Piece(s)	4 Day(s)	[Hard Chrome Plating] Hard Chrome Plating	Dip Quenching	[SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel)	-	4	4	0.5 ～ 10	g7	g7	3 ～ 25	15 ～ 60
-	1 Piece(s)	4 Day(s)	[Hard Chrome Plating] Hard Chrome Plating	Dip Quenching	[SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel)	-	5	5	0.5 ～ 10	g7	g7	4 ～ 30	15 ～ 60
-	1 Piece(s)	4 Day(s)	[Hard Chrome Plating] Hard Chrome Plating	Dip Quenching	[SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel)	-	6	6	0.5 ～ 10	g7	g7	5 ～ 40	15 ～ 60
-	1 Piece(s)	4 Day(s)	[Hard Chrome Plating] Hard Chrome Plating	Dip Quenching	[SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel)	-	8	8	0.5 ～ 10	g7	g7	5 ～ 40	15 ～ 60
-	1 Piece(s)	4 Day(s)	[Hard Chrome Plating] Hard Chrome Plating	Dip Quenching	[SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel)	-	10	10	0.5 ～ 10	g7	g7	5 ～ 40	15 ～ 60
-	1 Piece(s)	4 Day(s)	[Hard Chrome Plating] Hard Chrome Plating	Dip Quenching	[SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel)	-	2	2	0.5 ～ 10	h7	h7	3 ～ 20	15 ～ 60
-	1 Piece(s)	4 Day(s)	[Hard Chrome Plating] Hard Chrome Plating	Dip Quenching	[SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel)	-	3	3	0.5 ～ 10	h7	h7	3 ～ 20	15 ～ 60
-	1 Piece(s)	4 Day(s)	[Hard Chrome Plating] Hard Chrome Plating	Dip Quenching	[SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel)	-	4	4	0.5 ～ 10	h7	h7	3 ～ 25	15 ～ 60
-	1 Piece(s)	4 Day(s)	[Hard Chrome Plating] Hard Chrome Plating	Dip Quenching	[SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel)	-	5	5	0.5 ～ 10	h7	h7	4 ～ 30	15 ～ 60
-	1 Piece(s)	4 Day(s)	[Hard Chrome Plating] Hard Chrome Plating	Dip Quenching	[SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel)	-	6	6	0.5 ～ 10	h7	h7	5 ～ 40	15 ～ 60
-	1 Piece(s)	4 Day(s)	[Hard Chrome Plating] Hard Chrome Plating	Dip Quenching	[SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel)	-	8	8	0.5 ～ 10	h7	h7	5 ～ 40	15 ～ 60
-	1 Piece(s)	4 Day(s)	[Hard Chrome Plating] Hard Chrome Plating	Dip Quenching	[SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel)	-	10	10	0.5 ～ 10	h7	h7	5 ～ 40	15 ～ 60
-	1 Piece(s)	4 Day(s)	[Hard Chrome Plating] Hard Chrome Plating	Dip Quenching	[SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel)	-	2	2	0.5 ～ 10	m7	m7	3 ～ 20	15 ～ 60
-	1 Piece(s)	4 Day(s)	[Hard Chrome Plating] Hard Chrome Plating	Dip Quenching	[SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel)	-	3	3	0.5 ～ 10	m7	m7	3 ～ 20	15 ～ 60
-	1 Piece(s)	4 Day(s)	[Hard Chrome Plating] Hard Chrome Plating	Dip Quenching	[SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel)	-	4	4	0.5 ～ 10	m7	m7	3 ～ 25	15 ～ 60
-	1 Piece(s)	4 Day(s)	[Hard Chrome Plating] Hard Chrome Plating	Dip Quenching	[SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel)	-	5	5	0.5 ～ 10	m7	m7	4 ～ 30	15 ～ 60
-	1 Piece(s)	4 Day(s)	[Hard Chrome Plating] Hard Chrome Plating	Dip Quenching	[SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel)	-	6	6	0.5 ～ 10	m7	m7	5 ～ 40	15 ～ 60
-	1 Piece(s)	4 Day(s)	[Hard Chrome Plating] Hard Chrome Plating	Dip Quenching	[SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel)	-	8	8	0.5 ～ 10	m7	m7	5 ～ 40	15 ～ 60
-	1 Piece(s)	4 Day(s)	[Hard Chrome Plating] Hard Chrome Plating	Dip Quenching	[SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel)	-	10	10	0.5 ～ 10	m7	m7	5 ～ 40	15 ～ 60
-	1 Piece(s)	4 Day(s)	[Hard Chrome Plating] Hard Chrome Plating	Dip Quenching	[SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel)	-	2	2	0.5 ～ 10	p7	p7	3 ～ 20	15 ～ 60
-	1 Piece(s)	4 Day(s)	[Hard Chrome Plating] Hard Chrome Plating	Dip Quenching	[SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel)	-	3	3	0.5 ～ 10	p7	p7	3 ～ 20	15 ～ 60
-	1 Piece(s)	4 Day(s)	[Hard Chrome Plating] Hard Chrome Plating	Dip Quenching	[SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel)	-	4	4	0.5 ～ 10	p7	p7	3 ～ 25	15 ～ 60
-	1 Piece(s)	4 Day(s)	[Hard Chrome Plating] Hard Chrome Plating	Dip Quenching	[SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel)	-	5	5	0.5 ～ 10	p7	p7	4 ～ 30	15 ～ 60
-	1 Piece(s)	4 Day(s)	[Hard Chrome Plating] Hard Chrome Plating	Dip Quenching	[SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel)	-	6	6	0.5 ～ 10	p7	p7	5 ～ 40	15 ～ 60
-	1 Piece(s)	4 Day(s)	[Hard Chrome Plating] Hard Chrome Plating	Dip Quenching	[SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel)	-	8	8	0.5 ～ 10	p7	p7	5 ～ 40	15 ～ 60
-	1 Piece(s)	4 Day(s)	[Hard Chrome Plating] Hard Chrome Plating	Dip Quenching	[SKS3] Equivalent to 9CrWMn (alloy tool steel or bearing steel)	-	10	10	0.5 ～ 10	p7	p7	5 ～ 40	15 ～ 60
-	1 Piece(s)	4 Day(s)	[Hard Chrome Plating] Hard Chrome Plating	Not Provided	-	[SUS304] SUS304 Equivalent	2	2	0.5 ～ 10	g7	g7	3 ～ 20	15 ～ 60
-	1 Piece(s)	4 Day(s)	[Hard Chrome Plating] Hard Chrome Plating	Not Provided	-	[SUS304] SUS304 Equivalent	3	3	0.5 ～ 10	g7	g7	3 ～ 20	15 ～ 60
-	1 Piece(s)	4 Day(s)	[Hard Chrome Plating] Hard Chrome Plating	Not Provided	-	[SUS304] SUS304 Equivalent	4	4	0.5 ～ 10	g7	g7	3 ～ 25	15 ～ 60
-	1 Piece(s)	4 Day(s)	[Hard Chrome Plating] Hard Chrome Plating	Not Provided	-	[SUS304] SUS304 Equivalent	5	5	0.5 ～ 10	g7	g7	4 ～ 30	15 ～ 60
-	1 Piece(s)	4 Day(s)	[Hard Chrome Plating] Hard Chrome Plating	Not Provided	-	[SUS304] SUS304 Equivalent	6	6	0.5 ～ 10	g7	g7	5 ～ 40	15 ～ 60
-	1 Piece(s)	4 Day(s)	[Hard Chrome Plating] Hard Chrome Plating	Not Provided	-	[SUS304] SUS304 Equivalent	8	8	0.5 ～ 10	g7	g7	5 ～ 40	15 ～ 60

Basic Information

Basic Shape	Straight / Air Vent	Insertion Guide Tip Shape	Round	Insertion Guide Tip Type	Tapered
Insertion Guide Specifications	Not Provided	Mounting Side Shape	Straight (Press-Fit)

Configure

168 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Surface Treatment
- Not Provided
- Hard Chrome Plating
  - Hard Chrome Plating
Clear
Heat Treatment
- Not Provided
- Dip Quenching
Clear
Steel Type
- SKS3
  - Equivalent to 9CrWMn (alloy tool steel or bearing steel)
  - Alloy tool steel or bearing steel
Clear
Stainless Steel Type
- SUS304
  - SUS304 Equivalent
- SUS440C
  - Martensitic Stainless Steel
Clear
Locating Side Outer Dia. P (Ø)(mm)
2

3

4

5

6

8

10
Clear
Mounting Side Outer Dia. D(mm)
2

3

4

5

6

8

10
Clear
Taper Length E(mm)
[0.5-10/0.1mm Unit(s)]
Clear
Positioning Side O.D. Tolerance
- g7
- h7
- m7
- p7
Clear
Mounting Side Tolerance
g7

h7

m7

p7
Clear
Installation Part Length L(mm)
[3-40/0.1mm Unit(s)]
Clear
A(°)
15

30

45

60
Clear
type
- E-BLPSTAG
- E-BLPSTAH
- E-BLPSTAM
- E-BLPSTAP
- E-CLPSTAG
- E-CLPSTAH
- E-CLPSTAM
- E-CLPSTAP
- E-GLPSTAG
- E-GLPSTAH
- E-GLPSTAM
- E-GLPSTAP
- E-HLPSTAG
- E-HLPSTAH
- E-HLPSTAM
- E-HLPSTAP
- E-LPSTAG
- E-LPSTAH
- E-LPSTAM
- E-LPSTAP
- E-SLPSTAG
- E-SLPSTAH
- E-SLPSTAM
- E-SLPSTAP
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

4 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Additional Products in this Category

Tech Support

: Technical Inquiry

Bushing for positioning pin Shouldered	Bushing for positioning pin Straight type	Bushing for positioning pin Slotted hole type Shouldered type

Typical model: JBH6-8	Typical model: JBA3-8	Typical Model: JBPE10-P6.8-W4.82-L15
Advantages: suitable for applications where it is difficult to adjust the hole depth	Advantages: space-saving	Advantages: absorbs clearance errors

How can we improve?

Locating Pin Straight Taper Type, Press-Fit Type (Part Numbers)

Part Number

Basic Information

Configure

Specification/Dimensions

Surface Treatment

Heat Treatment

Steel Type

Stainless Steel Type

Locating Side Outer Dia. P (Ø)(mm)

Mounting Side Outer Dia. D(mm)

Taper Length E(mm)

Positioning Side O.D. Tolerance

Mounting Side Tolerance

Installation Part Length L(mm)

A(°)

type

CAD

Days to Ship

Specify Alterations

Additional Products in this Category

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm