[Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Locating Pins Small Head, Spherical, Tapped (Part Numbers)

Volume Discount

MISUMI

MiSUMi Economy

MISUMI

RoHS

Part Number

Configured Part Number is shown.

Drawing/Specifications
3D Preview
Part Numbers

Product Overview

The locating pin is used for the spatial positioning in the directions of X and Y axes, mainly using the workpiece hole as the positioning benchmark or used in conjunction with bushings. The small head spherical tapped type is easy to assemble and disassemble, and effectively ensures that the workpiece is smoothly guided into the positioning position.

Dimensional Drawing

Martensitic stainless steel products have an identification groove on D part.

Locating pins for circuit boards with shorter B fixed dimension are also available.

Specifications Overview

■Material Specification Table

Material No.	Material	Surface Treatment	Hardness	P Dimension Configurable		P/L/B Dimension Configurable
Material No.	Material	Surface Treatment	Hardness	Type	Shape Code	Type	Shape Code
①	Alloy tool steel or bearing steel	-	Quenching hardness 60～63HRC	E-JPQS	TA(Round) TD(Diamond)	E-FPQS	TA(Round) TD(Diamond)
②	Alloy tool steel or bearing steel	Hard Chrome Plated	Quenching hardness 50～55HRC Plating hardness 750HV～	E-GJPQS		E-GFPQS
③	Austenitic stainless steel	-	-	E-SJPQS		E-SFPQS
⑤	Martensitic stainless steel	-	Quenching hardness 50～55HRC	E-CJPQS		E-CFPQS

If there are requirements on rust prevention, give priority to the hard-chrome plated or austenitic stainless steel products.

Specification Table

Part Number						P							L		B		M (Coarse Thread)	ℓ	(W)
Type	Shape	D			D Dimension Tolerance g7	P							L		B
Type	Shape	P, L, B Configurable	P Configurable	P Fixed	D Dimension Tolerance g7	Dimension Configurable (0.01mm increments)	Dimension Fixed (Selectable)						P, L, B Configurable (1mm increments)	P Configurable /P Fixed	P, L, B Configurable (0.1mm increments)	P Configurable /P Fixed
P Dimension Configurable E-JPQS E-GJPQS E-SJPQS E-CJPQS P, L, B Configurable E-FPQS E-GFPQS E-SFPQS E-CFPQS	TA (Round) TD (Diamond)	5	5	-	-0.004 -0.016	3.00～5.00	-						8~10	10	2.0~10.0	5	M2	3	1.2
		6	6	6		4.00～6.00	4	5					8(9)～17		2.0~15.0		M3	5	1.5
		6T	6T	-		4.00～6.00	-						8(9)～12		2.0~12.0		M2.6	4	1.5
		8	8	8	-0.005 -0.020	6.00～8.00			6	7			11(12)～21	15	2.0～30.0(15.0)	6	M5	8	1.8
		8T	-	-		6.00～8.00	-						11(12)～21		2.0～30.0(15.0)	6	M4	6	1.8
		10	10	10		7.00~10.00				7	8		11(12)～23		3.0～30.0(25.0)	8	M5	8	2.2
		10T	-	-		7.00~10.00	-						8(12)～23	-	3.0～30.0(25.0)	-	M4	6	2.2
		12	12	-	-0.006 -0.024	7.00~12.00	-						12～24	15	3.0～30.0(25.0)	8	M5	8	2.5
		12T	-	-		7.00~12.00	-						8(12)～18	-	3.0～30.0(25.0)	-	M4	6	2.5
		13	13	13		8.00~13.00					8	10	13(14)～26	22	5.0～30.0(25.0)	8	M8	10	3
		13T	-	-		8.00~13.00	-						10(14)～20	-	5.0～30.0(25.0)	-	M6	9	3
		16	16	16		10.00~16.00						10	16～32	22	5.0~30.0	10	M8	12	4
		16T	-	-		10.00~16.00	-						10(14)～24	-	5.0~30.0	-	M6	9	4
		20	20	-	-0.007 -0.028	13.00~20.00	-						20～40	30	5.0~30.0	10	M8	12	5
		20T	-	-	-0.007 -0.028	13.00~20.00	-						12(18)～30	-	5.0~30.0	-	M6	9	5

TB (Round) only applies to P Dimension Fixed.

B dimension in ( ) applies to Diamond Shape.

Pins of D dimension with T have one size smaller thread diameter and larger wall thickness. (Actual D dimension is the number without "T".)

L dimension in ( ) applies to Diamond Shape.

Note the strength of under-head part.

Strength Reference for Under-head Part

Please confirm pilot hole depth.

Pilot Hole Depth Reference. Holes may go through.

Product Features

Usage outline of large head, tapered, press fit, standard locating pins Locating Pins

Feature 1: Standard type with spherical lead-in part. Tapped mounting, tolerance of press-fit part: g7.
Feature 2: The head is available in round and diamond types. The freely specified type is rich in specifications.
Feature 3: Optional material: iron (alloy tool steel or bearing steel); austenitic stainless steel, martensitic stainless steel, suitable for positioning of various workpieces.
Feature 4: Hard chrome plated surface, effectively ensuring surface hardness and antirust.

Precautions

①Dimensional tolerance and fit parameter table For details, click

Dimensional Tolerance Fit Table
②Reference table for common dimensions without indicated tolerance (medium accuracy m) For details, click

Table of Dimensions Without Indicated Tolerance
③Reference value for thread mounting torque The tightening torque (reference value) is the strength class (8.8) in the technical data

Torque Reference Table, and the tightening state lasts for more than 24 hours. Not applicable when using locking agents or spring washers.

Example of Use

Example introduction: Round and diamond types combined for positioning
①The combination of round and diamond types in the fixture enables more accurate positioning in A direction and reduction of the mating hole pitch error in B direction.
②Of the 2 locating pins, the cylindrical shape is taken as reference for 1 locating pin, and the cut-flat position on the round shape (diamond type) in the direction of the center distance of the two holes is taken as reference for the other, which enables mounting/dismounting operations and ensures positioning accuracy.
③Taking advantage of the different heights of the 2 locating pins, insert the tall pin for pre-positioning and then the short pin for precise positioning.

Application Industries

Lithium battery	Semiconductor	Medical

Smart Phones	Electronic & Electrical	Robotics

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 60; 90

Part Number
E-CFPQSTA5-P[3-5/0.01]-L[8-10/1]-B[2-15/0.1]
E-CFPQSTA6-P[4-6/0.01]-L[8-17/1]-B[2-15/0.1]
E-CFPQSTA6T-P[4-6/0.01]-L[8-17/1]-B[2-15/0.1]
E-CFPQSTA8-P[6-8/0.01]-L[11-21/1]-B[2-30/0.1]
E-CFPQSTA8T-P[6-8/0.01]-L[11-21/1]-B[2-30/0.1]
E-CFPQSTA10-P[7-10/0.01]-L[12-23/1]-B[3-30/0.1]
E-CFPQSTA10T-P[7-10/0.01]-L[12-23/1]-B[3-30/0.1]
E-CFPQSTA12-P[7-12/0.01]-L[12-24/1]-B[3-30/0.1]
E-CFPQSTA12T-P[7-12/0.01]-L[8-18/1]-B[3-30/0.1]
E-CFPQSTA13-P[8-13/0.01]-L[13-26/1]-B[5-30/0.1]
E-CFPQSTA13T-P[8-13/0.01]-L[10-20/1]-B[5-30/0.1]
E-CFPQSTA16-P[10-16/0.01]-L[16-32/1]-B[5-30/0.1]
E-CFPQSTA16T-P[10-16/0.01]-L[10-24/1]-B[5-30/0.1]
E-CFPQSTA20-P[13-20/0.01]-L[20-40/1]-B[5-30/0.1]
E-CFPQSTA20T-P[13-20/0.01]-L[12-30/1]-B[5-30/0.1]
E-CFPQSTD5-P[3-5/0.01]-L[8-10/1]-B[2-10/0.1]
E-CFPQSTD6-P[4-6/0.01]-L[8-17/1]-B[2-15/0.1]
E-CFPQSTD6T-P[4-6/0.01]-L[9-17/1]-B[2-15/0.1]
E-CFPQSTD8-P[6-8/0.01]-L[12-21/1]-B[2-15/0.1]
E-CFPQSTD8T-P[6-8/0.01]-L[12-21/1]-B[2-15/0.1]
E-CFPQSTD10-P[7-10/0.01]-L[12-23/1]-B[3-25/0.1]
E-CFPQSTD10T-P[7-10/0.01]-L[12-23/1]-B[3-25/0.1]
E-CFPQSTD12-P[7-12/0.01]-L[12-24/1]-B[3-25/0.1]
E-CFPQSTD12T-P[7-12/0.01]-L[12-18/1]-B[3-25/0.1]
E-CFPQSTD13-P[8-13/0.01]-L[14-26/1]-B[5-25/0.1]
E-CFPQSTD13T-P[8-13/0.01]-L[14-20/1]-B[5-25/0.1]
E-CFPQSTD16-P[10-16/0.01]-L[16-32/1]-B[5-30/0.1]
E-CFPQSTD16T-P[10-16/0.01]-L[14-24/1]-B[5-30/0.1]
E-CFPQSTD20-P[13-20/0.01]-L[20-40/1]-B[5-30/0.1]
E-CFPQSTD20T-P[13-20/0.01]-L[18-30/1]-B[5-30/0.1]
E-CJPQSTA5-P[3-5/0.01]
E-CJPQSTA6-[4-6/0.01]
E-CJPQSTA6T-[4-6/0.01]
E-CJPQSTA8-[6-8/0.01]
E-CJPQSTA8T-[6-8/0.01]
E-CJPQSTA10-[7-10/0.01]
E-CJPQSTA12-[7-12/0.01]
E-CJPQSTA13-[8-13/0.01]
E-CJPQSTA16-[10-16/0.01]
E-CJPQSTA20-[13-20/0.01]
E-CJPQSTD5-P[3-5/0.01]
E-CJPQSTD6-[4-6/0.01]
E-CJPQSTD6T-[4-6/0.01]
E-CJPQSTD8-[6-8/0.01]
E-CJPQSTD8T-[6-8/0.01]
E-CJPQSTD10-[7-10/0.01]
E-CJPQSTD12-[7-12/0.01]
E-CJPQSTD13-[8-13/0.01]
E-CJPQSTD16-[10-16/0.01]
E-CJPQSTD20-[13-20/0.01]
E-FPQSTA5-P[3-5/0.01]-L[8-10/1]-B[2-15/0.1]
E-FPQSTA6-P[4-6/0.01]-L[8-17/1]-B[2-15/0.1]
E-FPQSTA6T-P[4-6/0.01]-L[8-17/1]-B[2-15/0.1]
E-FPQSTA8-P[6-8/0.01]-L[11-21/1]-B[2-30/0.1]
E-FPQSTA8T-P[6-8/0.01]-L[11-21/1]-B[2-30/0.1]
E-FPQSTA10-P[7-10/0.01]-L[11-23/1]-B[3-30/0.1]
E-FPQSTA10T-P[7-10/0.01]-L[8-23/1]-B[3-30/0.1]
E-FPQSTA12-P[7-12/0.01]-L[12-24/1]-B[3-30/0.1]
E-FPQSTA12T-P[7-12/0.01]-L[8-18/1]-B[3-30/0.1]
E-FPQSTA13-P[8-13/0.01]-L[13-26/1]-B[5-30/0.1]
E-FPQSTA13T-P[8-13/0.01]-L[10-20/1]-B[5-30/0.1]
E-FPQSTA16-P[10-16/0.01]-L[16-32/1]-B[5-30/0.1]
E-FPQSTA16T-P[10-16/0.01]-L[10-24/1]-B[5-30/0.1]
E-FPQSTA20-P[13-20/0.01]-L[20-40/1]-B[5-30/0.1]
E-FPQSTA20T-P[13-20/0.01]-L[12-30/1]-B[5-30/0.1]
E-FPQSTD5-P[3-5/0.01]-L[8-10/1]-B[2-10/0.1]
E-FPQSTD6-P[4-6/0.01]-L[9-17/1]-B[2-15/0.1]
E-FPQSTD6T-P[3-5/0.01]-L[9-17/1]-B[2-15/0.1]
E-FPQSTD8-P[6-8/0.01]-L[12-21/1]-B[2-15/0.1]
E-FPQSTD8T-P[6-8/0.01]-L[12-21/1]-B[2-15/0.1]
E-FPQSTD10-P[7-10/0.01]-L[12-23/1]-B[3-25/0.1]
E-FPQSTD10T-P[7-10/0.01]-L[12-23/1]-B[3-25/0.1]
E-FPQSTD12-P[7-12/0.01]-L[12-24/1]-B[3-25/0.1]
E-FPQSTD12T-P[7-12/0.01]-L[12-18/1]-B[3-25/0.1]
E-FPQSTD13-P[8-13/0.01]-L[14-26/1]-B[5-25/0.1]
E-FPQSTD13T-P[8-13/0.01]-L[14-20/1]-B[5-25/0.1]
E-FPQSTD16-P[10-16/0.01]-L[16-32/1]-B[5-30/0.1]
E-FPQSTD16T-P[10-16/0.01]-L[14-24/1]-B[5-30/0.1]
E-FPQSTD20-P[13-20/0.01]-L[20-40/1]-B[5-30/0.1]
E-FPQSTD20T-P[13-20/0.01]-L[18-30/1]-B[5-30/0.1]
E-GFPQSTA5-P[3-5/0.01]-L[8-10/1]-B[2-15/0.1]
E-GFPQSTA6-P[4-6/0.01]-L[8-17/1]-B[2-15/0.1]
E-GFPQSTA6T-P[4-6/0.01]-L[8-17/1]-B[2-15/0.1]
E-GFPQSTA8-P[6-8/0.01]-L[11-21/1]-B[2-30/0.1]
E-GFPQSTA8T-P[6-8/0.01]-L[11-21/1]-B[2-30/0.1]
E-GFPQSTA10-P[7-10/0.01]-L[11-23/1]-B[3-30/0.1]
E-GFPQSTA10T-P[7-10/0.01]-L[8-23/1]-B[3-30/0.1]
E-GFPQSTA12-P[7-12/0.01]-L[12-24/1]-B[3-30/0.1]
E-GFPQSTA12T-P[7-12/0.01]-L[8-18/1]-B[3-30/0.1]
E-GFPQSTA13-P[8-13/0.01]-L[13-26/1]-B[5-30/0.1]

Standard Unit Price	Minimum order quantity	Days to Ship	Insertion Guide Tip Shape	Surface Treatment	Heat Treatment	Steel Type	Stainless Steel Type	Locating Side Outer Dia. P (Ø) (mm)	Mounting Side Outer Dia. D (mm)	Screw Dia. M (mm)	Mounting Section Length L (mm)	Positioning Part Length B (mm)	Dimension Configurable Type	Application	Shouldered	Mounting Part Length L (mm)	Installation Part Length L (mm)	Positioning Part Length B (mm)
-	1 Piece(s)	4 Day(s)	Round	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	3 ～ 5	5	2	-	-	Specify P Size, L Size, B Size	-	-	8 ～ 10	-	2 ～ 15
-	1 Piece(s)	4 Day(s)	Round	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	4 ～ 6	6	3	-	-	Specify P Size, L Size, B Size	-	-	8 ～ 17	-	2 ～ 15
-	1 Piece(s)	4 Day(s)	Round	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	4 ～ 6	6T	2.6	-	-	Specify P Size, L Size, B Size	-	-	8 ～ 17	-	2 ～ 15
-	1 Piece(s)	4 Day(s)	Round	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	6 ～ 8	8	5	-	-	Specify P Size, L Size, B Size	-	-	11 ～ 21	-	2 ～ 30
-	1 Piece(s)	4 Day(s)	Round	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	6 ～ 8	8T	4	-	-	Specify P Size, L Size, B Size	-	-	11 ～ 21	-	2 ～ 30
-	1 Piece(s)	4 Day(s)	Round	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	7 ～ 10	10	5	-	-	Specify P Size, L Size, B Size	-	-	12 ～ 23	-	3 ～ 30
-	1 Piece(s)	4 Day(s)	Round	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	7 ～ 10	10T	4	-	-	Specify P Size, L Size, B Size	-	-	12 ～ 23	-	3 ～ 30
-	1 Piece(s)	4 Day(s)	Round	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	7 ～ 12	12	5	-	-	Specify P Size, L Size, B Size	-	-	12 ～ 24	-	3 ～ 30
-	1 Piece(s)	4 Day(s)	Round	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	7 ～ 12	12T	4	-	-	Specify P Size, L Size, B Size	-	-	8 ～ 18	-	3 ～ 30
-	1 Piece(s)	4 Day(s)	Round	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	8 ～ 13	13	8	-	-	Specify P Size, L Size, B Size	-	-	13 ～ 26	-	5 ～ 30
-	1 Piece(s)	4 Day(s)	Round	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	8 ～ 13	13T	6	-	-	Specify P Size, L Size, B Size	-	-	10 ～ 20	-	5 ～ 30
-	1 Piece(s)	4 Day(s)	Round	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	10 ～ 16	16	8	-	-	Specify P Size, L Size, B Size	-	-	16 ～ 32	-	5 ～ 30
-	1 Piece(s)	4 Day(s)	Round	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	10 ～ 16	16T	6	-	-	Specify P Size, L Size, B Size	-	-	10 ～ 24	-	5 ～ 30
-	1 Piece(s)	4 Day(s)	Round	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	13 ～ 20	20	8	-	-	Specify P Size, L Size, B Size	-	-	20 ～ 40	-	5 ～ 30
-	1 Piece(s)	4 Day(s)	Round	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	13 ～ 20	20T	6	-	-	Specify P Size, L Size, B Size	-	-	12 ～ 30	-	5 ～ 30
-	1 Piece(s)	4 Day(s)	Diamond	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	3 ～ 5	5	2	-	-	Specify P Size, L Size, B Size	-	-	8 ～ 10	-	2 ～ 10
-	1 Piece(s)	4 Day(s)	Diamond	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	4 ～ 6	6	3	-	-	Specify P Size, L Size, B Size	-	-	8 ～ 17	-	2 ～ 15
-	1 Piece(s)	4 Day(s)	Diamond	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	4 ～ 6	6T	2.6	-	-	Specify P Size, L Size, B Size	-	-	9 ～ 17	-	2 ～ 15
-	1 Piece(s)	4 Day(s)	Diamond	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	6 ～ 8	8	5	-	-	Specify P Size, L Size, B Size	-	-	12 ～ 21	-	2 ～ 15
-	1 Piece(s)	4 Day(s)	Diamond	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	6 ～ 8	8T	4	-	-	Specify P Size, L Size, B Size	-	-	12 ～ 21	-	2 ～ 15
-	1 Piece(s)	4 Day(s)	Diamond	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	7 ～ 10	10	5	-	-	Specify P Size, L Size, B Size	-	-	12 ～ 23	-	3 ～ 25
-	1 Piece(s)	4 Day(s)	Diamond	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	7 ～ 10	10T	4	-	-	Specify P Size, L Size, B Size	-	-	12 ～ 23	-	3 ～ 25
-	1 Piece(s)	4 Day(s)	Diamond	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	7 ～ 12	12	5	-	-	Specify P Size, L Size, B Size	-	-	12 ～ 24	-	3 ～ 25
-	1 Piece(s)	4 Day(s)	Diamond	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	7 ～ 12	12T	4	-	-	Specify P Size, L Size, B Size	-	-	12 ～ 18	-	3 ～ 25
-	1 Piece(s)	4 Day(s)	Diamond	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	8 ～ 13	13	8	-	-	Specify P Size, L Size, B Size	-	-	14 ～ 26	-	5 ～ 25
-	1 Piece(s)	4 Day(s)	Diamond	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	8 ～ 13	13T	6	-	-	Specify P Size, L Size, B Size	-	-	14 ～ 20	-	5 ～ 25
-	1 Piece(s)	4 Day(s)	Diamond	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	10 ～ 16	16	8	-	-	Specify P Size, L Size, B Size	-	-	16 ～ 32	-	5 ～ 30
-	1 Piece(s)	4 Day(s)	Diamond	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	10 ～ 16	16T	6	-	-	Specify P Size, L Size, B Size	-	-	14 ～ 24	-	5 ～ 30
-	1 Piece(s)	4 Day(s)	Diamond	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	13 ～ 20	20	8	-	-	Specify P Size, L Size, B Size	-	-	20 ～ 40	-	5 ～ 30
-	1 Piece(s)	4 Day(s)	Diamond	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	13 ～ 20	20T	6	-	-	Specify P Size, L Size, B Size	-	-	18 ～ 30	-	5 ～ 30
-	1 Piece(s)	4 Day(s)	Round	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	3 ～ 5	5	2	10	5	P dimension configurable	Standard Shape	Not Provided	-	-	-
-	1 Piece(s)	4 Day(s)	Round	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	4 ～ 6	6	3	10	5	P dimension configurable	Standard Shape	Not Provided	-	-	-
-	1 Piece(s)	4 Day(s)	Round	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	4 ～ 6	6T	2.6	10	5	P dimension configurable	Standard Shape	Not Provided	-	-	-
-	1 Piece(s)	4 Day(s)	Round	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	6 ～ 8	8	5	15	6	P dimension configurable	Standard Shape	Not Provided	-	-	-
-	1 Piece(s)	4 Day(s)	Round	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	6 ～ 8	8T	4	15	6	P dimension configurable	Standard Shape	Not Provided	-	-	-
-	1 Piece(s)	4 Day(s)	Round	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	7 ～ 10	10	5	15	8	P dimension configurable	Standard Shape	Not Provided	-	-	-
-	1 Piece(s)	4 Day(s)	Round	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	7 ～ 12	12	5	15	8	P dimension configurable	Standard Shape	Not Provided	-	-	-
-	1 Piece(s)	4 Day(s)	Round	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	8 ～ 13	13	8	22	8	P dimension configurable	Standard Shape	Not Provided	-	-	-
-	1 Piece(s)	4 Day(s)	Round	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	10 ～ 16	16	8	22	10	P dimension configurable	Standard Shape	Not Provided	-	-	-
-	1 Piece(s)	4 Day(s)	Round	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	13 ～ 20	20	8	30	10	P dimension configurable	Standard Shape	Not Provided	-	-	-
-	1 Piece(s)	4 Day(s)	Diamond	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	3 ～ 5	5	2	10	5	P dimension configurable	Standard Shape	Not Provided	-	-	-
-	1 Piece(s)	4 Day(s)	Diamond	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	4 ～ 6	6	3	10	5	P dimension configurable	Standard Shape	Not Provided	-	-	-
-	1 Piece(s)	4 Day(s)	Diamond	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	4 ～ 6	6T	2.6	10	5	P dimension configurable	Standard Shape	Not Provided	-	-	-
-	1 Piece(s)	4 Day(s)	Diamond	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	6 ～ 8	8	5	15	6	P dimension configurable	Standard Shape	Not Provided	-	-	-
-	1 Piece(s)	4 Day(s)	Diamond	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	6 ～ 8	8T	4	15	6	P dimension configurable	Standard Shape	Not Provided	-	-	-
-	1 Piece(s)	4 Day(s)	Diamond	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	7 ～ 10	10	5	15	8	P dimension configurable	Standard Shape	Not Provided	-	-	-
-	1 Piece(s)	4 Day(s)	Diamond	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	7 ～ 12	12	5	15	8	P dimension configurable	Standard Shape	Not Provided	-	-	-
-	1 Piece(s)	4 Day(s)	Diamond	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	8 ～ 13	13	8	22	8	P dimension configurable	Standard Shape	Not Provided	-	-	-
-	1 Piece(s)	4 Day(s)	Diamond	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	10 ～ 16	16	8	22	10	P dimension configurable	Standard Shape	Not Provided	-	-	-
-	1 Piece(s)	4 Day(s)	Diamond	Not Provided	Dip Quenching	-	[SUS440C] Martensitic Stainless Steel	13 ～ 20	20	8	30	10	P dimension configurable	Standard Shape	Not Provided	-	-	-
-	1 Piece(s)	4 Day(s)	Round	Not Provided	Dip Quenching	[SKS3] Alloy tool steel or bearing steel	-	3 ～ 5	5	2	-	-	Specify P Size, L Size, B Size	-	-	8 ～ 10	-	2 ～ 15
-	1 Piece(s)	4 Day(s)	Round	Not Provided	Dip Quenching	[SKS3] Alloy tool steel or bearing steel	-	4 ～ 6	6	3	-	-	Specify P Size, L Size, B Size	-	-	8 ～ 17	-	2 ～ 15
-	1 Piece(s)	4 Day(s)	Round	Not Provided	Dip Quenching	[SKS3] Alloy tool steel or bearing steel	-	4 ～ 6	6T	2.6	-	-	Specify P Size, L Size, B Size	-	-	8 ～ 17	-	2 ～ 15
-	1 Piece(s)	4 Day(s)	Round	Not Provided	Dip Quenching	[SKS3] Alloy tool steel or bearing steel	-	6 ～ 8	8	5	-	-	Specify P Size, L Size, B Size	-	-	11 ～ 21	-	2 ～ 30
-	1 Piece(s)	4 Day(s)	Round	Not Provided	Dip Quenching	[SKS3] Alloy tool steel or bearing steel	-	6 ～ 8	8T	4	-	-	Specify P Size, L Size, B Size	-	-	11 ～ 21	-	2 ～ 30
-	1 Piece(s)	4 Day(s)	Round	Not Provided	Dip Quenching	[SKS3] Alloy tool steel or bearing steel	-	7 ～ 10	10	5	-	-	Specify P Size, L Size, B Size	-	-	11 ～ 23	-	3 ～ 30
-	1 Piece(s)	4 Day(s)	Round	Not Provided	Dip Quenching	[SKS3] Alloy tool steel or bearing steel	-	7 ～ 10	10T	4	-	-	Specify P Size, L Size, B Size	-	-	8 ～ 23	-	3 ～ 30
-	1 Piece(s)	4 Day(s)	Round	Not Provided	Dip Quenching	[SKS3] Alloy tool steel or bearing steel	-	7 ～ 12	12	5	-	-	Specify P Size, L Size, B Size	-	-	12 ～ 24	-	3 ～ 30
-	1 Piece(s)	4 Day(s)	Round	Not Provided	Dip Quenching	[SKS3] Alloy tool steel or bearing steel	-	7 ～ 12	12T	4	-	-	Specify P Size, L Size, B Size	-	-	8 ～ 18	-	3 ～ 30
-	1 Piece(s)	4 Day(s)	Round	Not Provided	Dip Quenching	[SKS3] Alloy tool steel or bearing steel	-	8 ～ 13	13	8	-	-	Specify P Size, L Size, B Size	-	-	13 ～ 26	-	5 ～ 30
-	1 Piece(s)	4 Day(s)	Round	Not Provided	Dip Quenching	[SKS3] Alloy tool steel or bearing steel	-	8 ～ 13	13T	6	-	-	Specify P Size, L Size, B Size	-	-	10 ～ 20	-	5 ～ 30
-	1 Piece(s)	4 Day(s)	Round	Not Provided	Dip Quenching	[SKS3] Alloy tool steel or bearing steel	-	10 ～ 16	16	8	-	-	Specify P Size, L Size, B Size	-	-	16 ～ 32	-	5 ～ 30
-	1 Piece(s)	4 Day(s)	Round	Not Provided	Dip Quenching	[SKS3] Alloy tool steel or bearing steel	-	10 ～ 16	16T	6	-	-	Specify P Size, L Size, B Size	-	-	10 ～ 24	-	5 ～ 30
-	1 Piece(s)	4 Day(s)	Round	Not Provided	Dip Quenching	[SKS3] Alloy tool steel or bearing steel	-	13 ～ 20	20	8	-	-	Specify P Size, L Size, B Size	-	-	20 ～ 40	-	5 ～ 30
-	1 Piece(s)	4 Day(s)	Round	Not Provided	Dip Quenching	[SKS3] Alloy tool steel or bearing steel	-	13 ～ 20	20T	6	-	-	Specify P Size, L Size, B Size	-	-	12 ～ 30	-	5 ～ 30
-	1 Piece(s)	4 Day(s)	Diamond	Not Provided	Dip Quenching	[SKS3] Alloy tool steel or bearing steel	-	3 ～ 5	5	2	-	-	Specify P Size, L Size, B Size	-	-	8 ～ 10	-	2 ～ 10
-	1 Piece(s)	4 Day(s)	Diamond	Not Provided	Dip Quenching	[SKS3] Alloy tool steel or bearing steel	-	4 ～ 6	6	3	-	-	Specify P Size, L Size, B Size	-	-	9 ～ 17	-	2 ～ 15
-	1 Piece(s)	4 Day(s)	Diamond	Not Provided	Dip Quenching	[SKS3] Alloy tool steel or bearing steel	-	3 ～ 5	6T	2.6	-	-	Specify P Size, L Size, B Size	-	-	9 ～ 17	-	2 ～ 15
-	1 Piece(s)	4 Day(s)	Diamond	Not Provided	Dip Quenching	[SKS3] Alloy tool steel or bearing steel	-	6 ～ 8	8	5	-	-	Specify P Size, L Size, B Size	-	-	12 ～ 21	-	2 ～ 15
-	1 Piece(s)	4 Day(s)	Diamond	Not Provided	Dip Quenching	[SKS3] Alloy tool steel or bearing steel	-	6 ～ 8	8T	4	-	-	Specify P Size, L Size, B Size	-	-	12 ～ 21	-	2 ～ 15
-	1 Piece(s)	4 Day(s)	Diamond	Not Provided	Dip Quenching	[SKS3] Alloy tool steel or bearing steel	-	7 ～ 10	10	5	-	-	Specify P Size, L Size, B Size	-	-	12 ～ 23	-	3 ～ 25
-	1 Piece(s)	4 Day(s)	Diamond	Not Provided	Dip Quenching	[SKS3] Alloy tool steel or bearing steel	-	7 ～ 10	10T	4	-	-	Specify P Size, L Size, B Size	-	-	12 ～ 23	-	3 ～ 25
-	1 Piece(s)	4 Day(s)	Diamond	Not Provided	Dip Quenching	[SKS3] Alloy tool steel or bearing steel	-	7 ～ 12	12	5	-	-	Specify P Size, L Size, B Size	-	-	12 ～ 24	-	3 ～ 25
-	1 Piece(s)	4 Day(s)	Diamond	Not Provided	Dip Quenching	[SKS3] Alloy tool steel or bearing steel	-	7 ～ 12	12T	4	-	-	Specify P Size, L Size, B Size	-	-	12 ～ 18	-	3 ～ 25
-	1 Piece(s)	4 Day(s)	Diamond	Not Provided	Dip Quenching	[SKS3] Alloy tool steel or bearing steel	-	8 ～ 13	13	8	-	-	Specify P Size, L Size, B Size	-	-	14 ～ 26	-	5 ～ 25
-	1 Piece(s)	4 Day(s)	Diamond	Not Provided	Dip Quenching	[SKS3] Alloy tool steel or bearing steel	-	8 ～ 13	13T	6	-	-	Specify P Size, L Size, B Size	-	-	14 ～ 20	-	5 ～ 25
-	1 Piece(s)	4 Day(s)	Diamond	Not Provided	Dip Quenching	[SKS3] Alloy tool steel or bearing steel	-	10 ～ 16	16	8	-	-	Specify P Size, L Size, B Size	-	-	16 ～ 32	-	5 ～ 30
-	1 Piece(s)	4 Day(s)	Diamond	Not Provided	Dip Quenching	[SKS3] Alloy tool steel or bearing steel	-	10 ～ 16	16T	6	-	-	Specify P Size, L Size, B Size	-	-	14 ～ 24	-	5 ～ 30
-	1 Piece(s)	4 Day(s)	Diamond	Not Provided	Dip Quenching	[SKS3] Alloy tool steel or bearing steel	-	13 ～ 20	20	8	-	-	Specify P Size, L Size, B Size	-	-	20 ～ 40	-	5 ～ 30
-	1 Piece(s)	4 Day(s)	Diamond	Not Provided	Dip Quenching	[SKS3] Alloy tool steel or bearing steel	-	13 ～ 20	20T	6	-	-	Specify P Size, L Size, B Size	-	-	18 ～ 30	-	5 ～ 30
-	1 Piece(s)	4 Day(s)	Round	[Hard Chrome Plating] Hard Chrome Plating	Dip Quenching	[SKS3] Alloy tool steel or bearing steel	-	3 ～ 5	5	2	-	-	Specify P Size, L Size, B Size	-	-	8 ～ 10	-	2 ～ 15
-	1 Piece(s)	4 Day(s)	Round	[Hard Chrome Plating] Hard Chrome Plating	Dip Quenching	[SKS3] Alloy tool steel or bearing steel	-	4 ～ 6	6	3	-	-	Specify P Size, L Size, B Size	-	-	8 ～ 17	-	2 ～ 15
-	1 Piece(s)	4 Day(s)	Round	[Hard Chrome Plating] Hard Chrome Plating	Dip Quenching	[SKS3] Alloy tool steel or bearing steel	-	4 ～ 6	6T	2.6	-	-	Specify P Size, L Size, B Size	-	-	8 ～ 17	-	2 ～ 15
-	1 Piece(s)	4 Day(s)	Round	[Hard Chrome Plating] Hard Chrome Plating	Dip Quenching	[SKS3] Alloy tool steel or bearing steel	-	6 ～ 8	8	5	-	-	Specify P Size, L Size, B Size	-	-	11 ～ 21	-	2 ～ 30
-	1 Piece(s)	4 Day(s)	Round	[Hard Chrome Plating] Hard Chrome Plating	Dip Quenching	[SKS3] Alloy tool steel or bearing steel	-	6 ～ 8	8T	4	-	-	Specify P Size, L Size, B Size	-	-	11 ～ 21	-	2 ～ 30
-	1 Piece(s)	4 Day(s)	Round	[Hard Chrome Plating] Hard Chrome Plating	Dip Quenching	[SKS3] Alloy tool steel or bearing steel	-	7 ～ 10	10	5	-	-	Specify P Size, L Size, B Size	-	-	11 ～ 23	-	3 ～ 30
-	1 Piece(s)	4 Day(s)	Round	[Hard Chrome Plating] Hard Chrome Plating	Dip Quenching	[SKS3] Alloy tool steel or bearing steel	-	7 ～ 10	10T	4	-	-	Specify P Size, L Size, B Size	-	-	8 ～ 23	-	3 ～ 30
-	1 Piece(s)	4 Day(s)	Round	[Hard Chrome Plating] Hard Chrome Plating	Dip Quenching	[SKS3] Alloy tool steel or bearing steel	-	7 ～ 12	12	5	-	-	Specify P Size, L Size, B Size	-	-	12 ～ 24	-	3 ～ 30
-	1 Piece(s)	4 Day(s)	Round	[Hard Chrome Plating] Hard Chrome Plating	Dip Quenching	[SKS3] Alloy tool steel or bearing steel	-	7 ～ 12	12T	4	-	-	Specify P Size, L Size, B Size	-	-	8 ～ 18	-	3 ～ 30
-	1 Piece(s)	4 Day(s)	Round	[Hard Chrome Plating] Hard Chrome Plating	Dip Quenching	[SKS3] Alloy tool steel or bearing steel	-	8 ～ 13	13	8	-	-	Specify P Size, L Size, B Size	-	-	13 ～ 26	-	5 ～ 30

Basic Information

Basic Shape	Small Head	Insertion Guide Tip Type	Spherical	Insertion Guide Specifications	Not Provided
Mounting Side Shape	Tapped	Locating Side O.D. Tolerance	0/-0.02	Mounting Side Tolerance	g7

Configure

201 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Insertion Guide Tip Shape
- Round
- Diamond
Clear
Surface Treatment
- Not Provided
- Hard Chrome Plating
  - Hard Chrome Plating
Clear
Heat Treatment
- Not Provided
- Dip Quenching
Clear
Steel Type
- SKS3
  - Alloy tool steel or bearing steel
Clear
Stainless Steel Type
- SUS440C
  - Martensitic Stainless Steel
Clear
Locating Side Outer Dia. P (Ø)(mm)
[3-20/0.01mm Unit(s)]
Clear
Mounting Side Outer Dia. D(mm)
5

6

6T

8

8T

10

10T

12

12T

13

13T

16

16T

20

20T
Clear
Screw Dia. M(mm)
2

2.6

3

4

5

6

8
Clear
Mounting Section Length L(mm)
10

15

22

30
Clear
Positioning Part Length B(mm)
5

6

8

10
Clear
Dimension Configurable Type
- P dimension configurable
- Specify P Size, L Size, B Size
Clear
Application
- Standard Shape
Clear
Shouldered
- Not Provided
Clear
Mounting Part Length L(mm)
[8-40/1mm Unit(s)]
Clear
Installation Part Length L(mm)
9
Clear
Positioning Part Length B(mm)
[2-30/0.1mm Unit(s)]
Clear
type
- E-CFPQSTA
- E-CFPQSTD
- E-CJPQSTA
- E-CJPQSTD
- E-FPQSTA
- E-FPQSTD
- E-GFPQSTA
- E-GFPQSTD
- E-GJPQSTA
- E-GJPQSTD
- E-JPQSTA
- E-JPQSTD
- E-SFPQSTA
- E-SFPQSTD
- E-SJPQSTA
- E-SJPQSTD
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

4 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Additional Products in this Category

Tech Support

: Technical Inquiry

Bushings for Locating Pins, Shouldered	Bushings for Locating Pins, Straight	Bushings for Locating Pins, Slotted Hole, Shouldered

Representative model: JBH6-8	Representative model: JBA3-8	Representative model: JBPE10-P6.8-W4.82-L15
Advantages: suitable for applications where it is difficult to adjust the hole depth	Advantages: space-saving	Advantages: absorbs clearance errors

How can we improve?

Locating Pins Small Head, Spherical, Tapped (Part Numbers)

Part Number

Basic Information

Configure

Specification/Dimensions

Insertion Guide Tip Shape

Surface Treatment

Heat Treatment

Steel Type

Stainless Steel Type

Locating Side Outer Dia. P (Ø)(mm)

Mounting Side Outer Dia. D(mm)

Screw Dia. M(mm)

Mounting Section Length L(mm)

Positioning Part Length B(mm)

Dimension Configurable Type

Application

Shouldered

Mounting Part Length L(mm)

Installation Part Length L(mm)

Positioning Part Length B(mm)

type

CAD

Days to Ship

Specify Alterations

Additional Products in this Category

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm