(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Round Posts One End Threaded, One End Tapped, Length and Thread Length Configurable (Part Numbers)
MiSUMi Economy
This is an economy item, The price is cheaper than the MISUMI standard product.
Part Number
Configured Part Number is shown.
Product Overview
Round post is a common processing component, with the functions of connection, fastening, support, separation and so on, mainly used in various fastening and supporting mechanisms.
At the same time, there are a variety of materials to choose from, allowing it to be widely used in automation, electronics and electrical appliances, medical treatment, communication and other fields.
At the same time, there are a variety of materials to choose from, allowing it to be widely used in automation, electronics and electrical appliances, medical treatment, communication and other fields.
Dimensional Drawing
Specifications Overview
| Type |  Material |  Surface Treatment | D(mm) | L(mm) | |
| Standard | With Wrench Slot Type | ||||
| E-NETH | E-NETHS | General Structural Steel or Carbon Steel | - | 5 to 50 | 15 to 1000 |
| E-ETKH | E-ETKHS | Black Oxide | |||
| E-PETH | E-PETHS | Electroless Nickel Plating | |||
| E-SETH | E-SETHS | Stainless Steel | - | ||
If there are requirements for rust prevention, give priority to products with surface treatment of electroless nickel plating and those made of stainless steel. Please click 
Rust Prevention MethodsProducts made of general structural steel or carbon steel are coated with anti-rust oil.Due to female thread processing, the D part of the female thread may sometimes be slightly raised.There may be grinding gloss marks near the wrench slot on products without surface treatment.SC ≤ L-ℓ1Specification Table
■ One end male thread, one end female thread, thread length specified
When L—SC ≤ N × 3, W—N ≥ 2 must be satisfied. L ≥ N × 3+2 *D ≥ 35 Only applicable for E-N□□□□·E-E□□□□·E-P□□□□.
L size tolerance is as shown below.
L15–300 ±0.2
L300.5–600 ±0.3
L600.5–1000 ±0.4
| Part Number | Can be specified down to 0.5mm increments |  M (Coarse) Male Thread Selection |  N (Coarse Thread) Female Thread Selection | W | ℓ1 | A | |||||||||||||||||||||||
 Type | D |  L |  F |  SCWith wrench slot only | |||||||||||||||||||||||||
| Male Thread on One End Female Thread on One End Thread Length Specification (Standard) General Structural Steel or Carbon Steel E-NETH E-ETKH E-PETH Stainless Steel E-SETH (With Wrench Slot Type) General Structural Steel or Carbon Steel E-NETHS E-ETKHS E-PETHS Stainless Steel E-SETHS | 6 | 15 to 100 | 5 to 30 | 0 to 92 | 3 | 4 | 5 | 3 | 4 | 5 | 8 | 1.0 | |||||||||||||||||
| 8 | 20 to 200 | 8 to 40 | 0 to 192 | 3 | 4 | 5 | 6 | 3 | 4 | 5 | 7 | 1.6 | |||||||||||||||||
| 10 | 20 to 400 | 8 to 45 | 0 to 392 | 3 | 4 | 5 | 6 | 8 | 3 | 4 | 5 | 6 | 8 | 2.0 | |||||||||||||||
| 12 | 25 to 500 | 10 to 55 | 0 to 490 | 4 | 5 | 6 | 8 | 10 | 4 | 5 | 6 | 8 | 10 | 10 | 2.5 | ||||||||||||||
| 15 | 30 to 600 | 12 to 60 | 0 to 590 | 5 | 6 | 8 | 10 | 12 | 5 | 6 | 8 | 10 | 13 | 3.0 | |||||||||||||||
| 20 | 40 to 600 | 15 to 75 | 0 to 590 | 5 | 6 | 8 | 10 | 12 | 16 | 5 | 6 | 8 | 10 | 12 | 17 | 3.5 | |||||||||||||
| 25 | 55 to 700 | 20 to 80 | 0 to 690 | 5 | 6 | 8 | 10 | 12 | 16 | 20 | 5 | 6 | 8 | 10 | 12 | 16 | 22 | 4.0 | |||||||||||
| 30 | 65 to 800 | 25 to 90 | 0 to 785 | 5 | 6 | 8 | 10 | 12 | 16 | 20 | 24 | 5 | 6 | 8 | 10 | 12 | 16 | 20 | 27 | 15 | 5.0 | ||||||||
| *35 | 80 to 900 | 30 to 100 | 0 to 885 | 6 | 8 | 10 | 12 | 16 | 20 | 24 | 6 | 8 | 10 | 12 | 16 | 20 | 24 | 30 | 15 | 6.0 | |||||||||
| *40 | 80 to 1000 | 35 to 110 | 0 to 980 | 8 | 10 | 12 | 16 | 20 | 24 | 8 | 10 | 12 | 16 | 20 | 24 | 36 | 20 | 6.0 | |||||||||||
| *50 | 80 to 1000 | 40 to 120 | 0 to 980 | 10 | 12 | 16 | 20 | 24 | 10 | 12 | 16 | 20 | 24 | 41 | 20 | 6.0 | |||||||||||||
When L—SC ≤ N × 3, W—N ≥ 2 must be satisfied. L ≥ N × 3+2 *D ≥ 35 Only applicable for E-N□□□□·E-E□□□□·E-P□□□□.L size tolerance is as shown below.
L15–300 ±0.2
L300.5–600 ±0.3
L600.5–1000 ±0.4
Product Features
Feature 1: the length and thread of the round post can be freely specified to accommodate different operating environments.
Feature 2: 2 types of materials to choose from: general structural steel, stainless steel.
Feature 3: Two types of surface treatments available: black oxide (ferroferric oxide protective film) and electroless nickel plating.
Feature 4: products with surface treatment (electroless nickel plating) and material (stainless steel) for good anti-rust performance are widely used in precision equipment and dust-free environment.
Feature 5: with the main functions of connection, fastening, support and separation, it is often used in mechanisms with various frames as a connection and support component.
Feature 2: 2 types of materials to choose from: general structural steel, stainless steel.
Feature 3: Two types of surface treatments available: black oxide (ferroferric oxide protective film) and electroless nickel plating.
Feature 4: products with surface treatment (electroless nickel plating) and material (stainless steel) for good anti-rust performance are widely used in precision equipment and dust-free environment.
Feature 5: with the main functions of connection, fastening, support and separation, it is often used in mechanisms with various frames as a connection and support component.
Usage Method
| Intended Use | Support and fixing | Fastening and connection | Separation |
| Usage Method Diagram |  |  |  |
| Features | - Can withstand large loads in the vertical direction - Minimum length tolerance specification selectable to ±0.05 mm, ensuring the stability of the mechanism | - Simple and aesthetic connection | - Connected to the baffle to effectively block the mechanism in operation and prevent interference - Easy to fasten and install in narrow spaces |
Precautions
(1) Fastening method of post
The post is generally fastened by torque method. For bolts, fasten them within the range of fastening torque, otherwise excessive torque will cause thread fracture.
(2) Anti-rust specification selection and maintenance
. If there are requirements for anti-corrosion performance, select products with surface treatment of electroless nickel plating or those made of stainless steel when choosing general structural steel products.
General structural steel posts without surface treatment are recommended to be stored in a constant-temperature and dry environment, and regularly applied with anti-rust oil for maintenance.
The post is generally fastened by torque method. For bolts, fasten them within the range of fastening torque, otherwise excessive torque will cause thread fracture.
(2) Anti-rust specification selection and maintenance
. If there are requirements for anti-corrosion performance, select products with surface treatment of electroless nickel plating or those made of stainless steel when choosing general structural steel products.
General structural steel posts without surface treatment are recommended to be stored in a constant-temperature and dry environment, and regularly applied with anti-rust oil for maintenance.
Example of Use
Application Industries
| Medical | Semiconductor | Electronic & Electrical Appliances | ||
 |  |  | ||
| Smart phone | Food | Automotive | ||
 |  |  |
Related Products
| Silicon Rubber Urethane Molded Bearings With Male Thread, Flat Type | Pillar Fixing Clamp Same Diameter Direct Intersection Standard Type / Same Diameter Direct Intersection Reverse Type | Metal Washer Standard Grade T Size Selection T Size Custom Type | ||
 |  |  | ||
| Typical model: UMSWH3-10 | Typical model: KDST15 | Typical model: WSSM13-6-5 | ||
| Advantages: high quality, low price, short delivery time | Advantages: full range, high precision and high quality | Advantages: full range of matching shaft products |
Related Documents
Applicable Bolt Tightening Torque
Bolt Strength
Rust Resistance of Metal Materials and Surface Treatments
Bolt Strength
Rust Resistance of Metal Materials and Surface Treatments
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| E-ETKH6-[15-100/0.5]-F[5-30/0.5]-M[3,4,5]-N[3,4] |
| E-ETKH8-[20-200/0.5]-F[8-40/0.5]-M[3,4,5,6]-N[3,4,5] |
| E-ETKH10-[20-400/0.5]-F[8-45/0.5]-M[3,4,5,6,8]-N[3,4,5,6] |
| E-ETKH12-[25-500/0.5]-F[10-55/0.5]-M[4,5,6,8,10]-N[4,5,6,8] |
| E-ETKH15-[30-600/0.5]-F[12-60/0.5]-M[5,6,8,10,12]-N[5,6,8,10] |
| E-ETKH20-[40-600/0.5]-F[15-75/0.5]-M[5,6,8,10,12,16]-N[5,6,8,10,12] |
| E-ETKH25-[55-700/0.5]-F[20-80/0.5]-M[5,6,8,10,12,16,20]-N[5,6,8,10,12,16] |
| E-ETKH30-[65-800/0.5]-F[25-90/0.5]-M[5,6,8,10,12,16,20,24]-N[5,6,8,10,12,16,20] |
| E-ETKH35-[80-900/0.5]-F[30-100/0.5]-M[6,8,10,12,16,20,24]-N[6,8,10,12,16,20,24] |
| E-ETKH40-[80-1000/0.5]-F[35-110/0.5]-M[8,10,12,16,20,24]-N[8,10,12,16,20,24] |
| E-ETKH50-[80-1000/0.5]-F[40-120/0.5]-M[10,12,16,20,24]-N[10,12,16,20,24] |
| E-ETKHS6-[15-100/0.5]-F[5-30/0.5]-SC[0-92/0.5]-M[3,4,5]-N[3,4] |
| E-ETKHS8-[20-200/0.5]-F[8-40/0.5]-SC[0-192/0.5]-M[3,4,5,6]-N[3,4,5] |
| E-ETKHS10-[20-400/0.5]-F[8-45/0.5]-SC[0-392/0.5]-M[3,4,5,6,8]-N[3,4,5,6] |
| E-ETKHS12-[25-500/0.5]-F[10-55/0.5]-SC[0-490/0.5]-M[4,5,6,8,10]-N[4,5,6,8] |
| E-ETKHS15-[30-600/0.5]-F[12-60/0.5]-SC[0-590/0.5]-M[5,6,8,10,12]-N[5,6,8,10] |
| E-ETKHS20-[40-600/0.5]-F[15-75/0.5]-SC[0-590/0.5]-M[5,6,8,10,12,16]-N[6,8,10,12] |
| E-ETKHS25-[55-700/0.5]-F[20-80/0.5]-SC[0-690/0.5]-M[5,6,8,10,12,16,20]-N[5,6,8,10,12,16] |
| E-ETKHS30-[65-800/0.5]-F[25-90/0.5]-SC[0-785/0.5]-M[5,6,8,10,12,16,20,24]-N[5,6,8,10,12,16,20] |
| E-ETKHS35-[80-900/0.5]-F[30-100/0.5]-SC[0-885/0.5]-M[6,8,10,12,16,20,24]-N[6,8,10,12,16,20,24] |
| E-ETKHS40-[80-1000/0.5]-F[35-110/0.5]-SC[0-980/0.5]-M[8,10,12,16,20,24]-N[8,10,12,16,20,24] |
| E-ETKHS50-[80-1000/0.5]-F[40-120/0.5]-SC[0-980/0.5]-M[10,12,16,20,24]-N[10,12,16,20,24] |
| E-NETH6-[15-100/0.5]-F[5-30/0.5]-M[3,4,5]-N[3,4] |
| E-NETH8-[20-200/0.5]-F[8-40/0.5]-M[3,4,5,6]-N[3,4,5] |
| E-NETH10-[20-400/0.5]-F[8-45/0.5]-M[3,4,5,6,8]-N[3,4,5,6] |
| E-NETH12-[25-500/0.5]-F[10-55/0.5]-M[4,5,6,8,10]-N[4,5,6,8] |
| E-NETH15-[30-600/0.5]-F[12-60/0.5]-M[5,6,8,10,12]-N[5,6,8,10] |
| E-NETH20-[40-600/0.5]-F[15-75/0.5]-M[5,6,8,10,12,16]-N[5,6,8,10,12] |
| E-NETH25-[55-700/0.5]-F[20-80/0.5]-M[5,6,8,10,12,16,20]-N[5,6,8,10,12,16] |
| E-NETH30-[65-800/0.5]-F[25-90/0.5]-M[5,6,8,10,12,16,20,24]-N[5,6,8,10,12,16,20] |
| E-NETH35-[80-900/0.5]-F[30-100/0.5]-M[6,8,10,12,16,20,24]-N[6,8,10,12,16,20,24] |
| E-NETH40-[80-1000/0.5]-F[35-110/0.5]-M[8,10,12,16,20,24]-N[8,10,12,16,20,24] |
| E-NETH50-[80-1000/0.5]-F[40-120/0.5]-M[10,12,16,20,24]-N[10,12,16,20,24] |
| E-NETHS6-[15-100/0.5]-F[5-30/0.5]-SC[0-92/0.5]-M[3,4,5]-N[3,4] |
| E-NETHS8-[20-200/0.5]-F[8-40/0.5]-SC[0-192/0.5]-M[3,4,5,6]-N[3,4,5] |
| E-NETHS10-[20-400/0.5]-F[8-45/0.5]-SC[0-392/0.5]-M[3,4,5,6,8]-N[3,4,5,6] |
| E-NETHS12-[25-500/0.5]-F[10-55/0.5]-SC[0-490/0.5]-M[4,5,6,8,10]-N[4,5,6,8] |
| E-NETHS15-[30-600/0.5]-F[12-60/0.5]-SC[0-590/0.5]-M[5,6,8,10,12]-N[5,6,8,10] |
| E-NETHS20-[40-600/0.5]-F[15-75/0.5]-SC[0-590/0.5]-M[5,6,8,10,12,16]-N[5,6,8,10,12] |
| E-NETHS25-[55-700/0.5]-F[20-80/0.5]-SC[0-690/0.5]-M[5,6,8,10,12,16,20]-N[5,6,8,10,12,16] |
| E-NETHS30-[65-800/0.5]-F[25-90/0.5]-SC[0-785/0.5]-M[5,6,8,10,12,16,20,24]-N[5,6,8,10,12,16,20] |
| E-NETHS35-[80-900/0.5]-F[30-100/0.5]-SC[0-885/0.5]-M[6,8,10,12,16,20,24]-N[6,8,10,12,16,20,24] |
| E-NETHS40-[80-1000/0.5]-F[35-110/0.5]-SC[0-980/0.5]-M[8,10,12,16,20,24]-N[8,10,12,16,20,24] |
| E-NETHS50-[80-1000/0.5]-F[40-120/0.5]-SC[0-980/0.5]-M[10,12,16,20,24]-N[10,12,16,20,24] |
| E-PETH6-[15-100/0.5]-F[5-30/0.5]-M[3,4,5]-N[3,4] |
| E-PETH8-[20-200/0.5]-F[8-40/0.5]-M[3,4,5,6]-N[3,4,5] |
| E-PETH10-[20-400/0.5]-F[8-45/0.5]-M[3,4,5,6,8]-N[3,4,5,6] |
| E-PETH12-[25-500/0.5]-F[10-55/0.5]-M[4,5,6,8,10]-N[4,5,6,8] |
| E-PETH15-[30-600/0.5]-F[12-60/0.5]-M[5,6,8,10,12]-N[5,6,8,10] |
| E-PETH20-[40-600/0.5]-F[15-75/0.5]-M[5,6,8,10,12,16]-N[5,6,8,10,12] |
| E-PETH25-[55-700/0.5]-F[20-80/0.5]-M[5,6,8,10,12,16,20]-N[5,6,8,10,12,16] |
| E-PETH30-[65-800/0.5]-F[25-90/0.5]-M[5,6,8,10,12,16,20,24]-N[5,6,8,10,12,16,20] |
| E-PETH35-[80-900/0.5]-F[30-100/0.5]-M[6,8,10,12,16,20,24]-N[6,8,10,12,16,20,24] |
| E-PETH40-[80-1000/0.5]-F[35-110/0.5]-M[8,10,12,16,20,24]-N[8,10,12,16,20,24] |
| E-PETH50-[80-1000/0.5]-F[40-120/0.5]-M[10,12,16,20,24]-N[10,12,16,20,24] |
| E-PETHS6-[15-100/0.5]-F[5-30/0.5]-SC[0-92/0.5]-M[3,4,5]-N[3,4] |
| E-PETHS8-[20-200/0.5]-F[8-40/0.5]-SC[0-192/0.5]-M[3,4,5,6]-N[3,4,5] |
| E-PETHS10-[20-400/0.5]-F[8-45/0.5]-SC[0-392/0.5]-M[3,4,5,6,8]-N[3,4,5,6] |
| E-PETHS12-[25-500/0.5]-F[10-55/0.5]-SC[0,0.5,490]-M[4,5,6,8,10]-N[4,5,6,8] |
| E-PETHS15-[30-600/0.5]-F[12-60/0.5]-SC[0-590/0.5]-M[5,6,8,10,12]-N[5,6,8,10] |
| E-PETHS20-[40-600/0.5]-F[15-75/0.5]-SC[0-590/0.5]-M[5,6,8,10,12,16]-N[6,8,10,12] |
| E-PETHS25-[55-700/0.5]-F[20-80/0.5]-SC[0-690/0.5]-M[5,6,8,10,12,16,20]-N[6,8,10,12,16] |
| E-PETHS30-[65-800/0.5]-F[25-90/0.5]-SC[0-785/0.5]-M[5,6,8,10,12,16,20,24]-N[5,6,8,10,12,16,20] |
| E-PETHS35-[80-900/0.5]-F[30-100/0.5]-SC[0-885/0.5]-M[6,8,10,12,16,20,24]-N[6,8,10,12,16,20,24] |
| E-PETHS40-[80-1000/0.5]-F[35-110/0.5]-SC[0-980/0.5]-M[8,10,12,16,20,24]-N[8,10,12,16,20,24] |
| E-PETHS50-[80-1000/0.5]-F[40-120/0.5]-SC[0-980/0.5]-M[10,12,16,20,24]-N[10,12,16,20,24] |
| E-SETH6-[15-100/0.5]-F[5-30/0.5]-M[3,4,5]-N[3,4] |
| E-SETH8-[20-200/0.5]-F[8-40/0.5]-M[3,4,5,6]-N[3,4,5] |
| E-SETH10-[20-400/0.5]-F[8-45/0.5]-M[3,4,5,6,8]-N[3,4,5,6] |
| E-SETH12-[25-500/0.5]-F[10-55/0.5]-M[4,5,6,8,10]-N[4,5,6,8] |
| E-SETH15-[30-600/0.5]-F[12-60/0.5]-M[5,6,8,10,12]-N[5,6,8,10] |
| E-SETH20-[40-600/0.5]-F[15-75/0.5]-M[5,6,8,10,12,16]-N[5,6,8,10,12] |
| E-SETH25-[55-700/0.5]-F[20-80/0.5]-M[5,6,8,10,12,16,20]-N[5,6,8,10,12,16] |
| E-SETH30-[65-800/0.5]-F[25-90/0.5]-M[5,6,8,10,12,16,20,24]-N[5,6,8,10,12,16,20] |
| E-SETHS6-[15-100/0.5]-F[5-30/0.5]-SC[0-92/0.5]-M[3,4,5]-N[3,4] |
| E-SETHS8-[20-200/0.5]-F[8-40/0.5]-SC[0-192/0.5]-M[3,4,5,6]-N[3,4,5] |
| E-SETHS10-[20-400/0.5]-F[8-45/0.5]-SC[0-392/0.5]-M[3,4,5,6,8]-N[3,4,5,6] |
| E-SETHS12-[25-500/0.5]-F[10-55/0.5]-SC[0-490/0.5]-M[4,5,6,8,10]-N[4,5,6,8] |
| E-SETHS15-[30-600/0.5]-F[12-60/0.5]-SC[0-590/0.5]-M[5,6,8,10,12]-N[5,6,8,10] |
| E-SETHS20-[40-600/0.5]-F[15-75/0.5]-SC[0-590/0.5]-M[5,6,8,10,12,16]-N[5,6,8,10,12] |
| E-SETHS25-[55-700/0.5]-F[20-80/0.5]-SC[0-690/0.5]-M[5,6,8,10,12,16,20]-N[6,8,10,12,16] |
| E-SETHS30-[65-800/0.5]-F[25-90/0.5]-SC[0-785/0.5]-M[5,6,8,10,12,16,20,24]-N[5,6,8,10,12,16,20] |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Outer Dia. D (Ø) | Material | Surface Treatment | Length L (mm) | Type | Wrench Flatted | Thread Diameter N (mm) | Distance to Wrench Slot [SC] (mm) | Thread Diameter M (mm) | Wrench Flats B (Circular) (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | 8 Day(s) | 6 | [Steel] General Structural Steel or Carbon Steel | Black Oxide | 15 ～ 100 | - | Not Provided | - | - | - | - | ||
- | 1 Piece(s) | 8 Day(s) | 8 | [Steel] General Structural Steel or Carbon Steel | Black Oxide | 20 ～ 200 | - | Not Provided | - | - | 6 | - | ||
- | 1 Piece(s) | 36 Day(s) | 10 | [Steel] General Structural Steel or Carbon Steel | Black Oxide | 20 ～ 400 | - | Not Provided | 6 | - | 6 | - | ||
- | 1 Piece(s) | 8 Day(s) | 12 | [Steel] General Structural Steel or Carbon Steel | Black Oxide | 25 ～ 500 | - | Not Provided | 6 | - | 6 | - | ||
- | 1 Piece(s) | 8 Day(s) | 15 | [Steel] General Structural Steel or Carbon Steel | Black Oxide | 30 ～ 600 | - | Not Provided | 6 | - | 6 | - | ||
- | 1 Piece(s) | 8 Day(s) | 20 | [Steel] General Structural Steel or Carbon Steel | Black Oxide | 40 ～ 600 | - | Not Provided | 6 | - | 6 | - | ||
- | 1 Piece(s) | 8 Day(s) | 25 | [Steel] General Structural Steel or Carbon Steel | Black Oxide | 55 ～ 700 | - | Not Provided | 6 | - | 6 | - | ||
- | 1 Piece(s) | 36 Day(s) | 30 | [Steel] General Structural Steel or Carbon Steel | Black Oxide | 65 ～ 800 | - | Not Provided | 6 | - | 6 | - | ||
- | 1 Piece(s) | 7 Day(s) | 35 | [Steel] General Structural Steel or Carbon Steel | Black Oxide | 80 ～ 900 | - | Not Provided | 6 | - | 6 | - | ||
- | 1 Piece(s) | 8 Day(s) | 40 | [Steel] General Structural Steel or Carbon Steel | Black Oxide | 80 ～ 1000 | - | Not Provided | - | - | - | - | ||
- | 1 Piece(s) | 8 Day(s) | 50 | [Steel] General Structural Steel or Carbon Steel | Black Oxide | 80 ～ 1000 | - | Not Provided | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | 6 | [Steel] General Structural Steel or Carbon Steel | Black Oxide | 15 ～ 100 | - | Provided | - | 0 ～ 92 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | 8 | [Steel] General Structural Steel or Carbon Steel | Black Oxide | 20 ～ 200 | - | Provided | - | 0 ～ 192 | 6 | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | [Steel] General Structural Steel or Carbon Steel | Black Oxide | 20 ～ 400 | - | Provided | 6 | 0 ～ 392 | 6 | - | ||
- | 1 Piece(s) | 7 Day(s) | 12 | [Steel] General Structural Steel or Carbon Steel | Black Oxide | 25 ～ 500 | - | Provided | 6 | 0 ～ 490 | 6 | - | ||
- | 1 Piece(s) | 7 Day(s) | 15 | [Steel] General Structural Steel or Carbon Steel | Black Oxide | 30 ～ 600 | - | Provided | 6 | 0 ～ 590 | 6 | - | ||
- | 1 Piece(s) | 7 Day(s) | 20 | [Steel] General Structural Steel or Carbon Steel | Black Oxide | 40 ～ 600 | - | Provided | 6 | 0 ～ 590 | 6 | - | ||
- | 1 Piece(s) | 7 Day(s) | 25 | [Steel] General Structural Steel or Carbon Steel | Black Oxide | 55 ～ 700 | - | Provided | 6 | 0 ～ 690 | 6 | - | ||
- | 1 Piece(s) | 7 Day(s) | 30 | [Steel] General Structural Steel or Carbon Steel | Black Oxide | 65 ～ 800 | - | Provided | 6 | 0 ～ 785 | 6 | - | ||
- | 1 Piece(s) | 7 Day(s) | 35 | [Steel] General Structural Steel or Carbon Steel | Black Oxide | 80 ～ 900 | External Thread on One End, Internal Thread on the Other End, with Wrench Slot Type | Provided | 6 | 0 ～ 885 | 6 | 30 | ||
- | 1 Piece(s) | 8 Day(s) | 40 | [Steel] General Structural Steel or Carbon Steel | Black Oxide | 80 ～ 1000 | - | Provided | - | 0 ～ 980 | - | - | ||
- | 1 Piece(s) | 8 Day(s) | 50 | [Steel] General Structural Steel or Carbon Steel | Black Oxide | 80 ～ 1000 | - | Provided | - | 0 ～ 980 | - | - | ||
- | 1 Piece(s) | 36 Day(s) | 6 | [Steel] General Structural Steel or Carbon Steel | Not Provided | 15 ～ 100 | - | Not Provided | - | - | - | - | ||
- | 1 Piece(s) | 8 Day(s) | 8 | [Steel] General Structural Steel or Carbon Steel | Not Provided | 20 ～ 200 | - | Not Provided | - | - | 6 | - | ||
- | 1 Piece(s) | 8 Day(s) | 10 | [Steel] General Structural Steel or Carbon Steel | Not Provided | 20 ～ 400 | - | Not Provided | 6 | - | 6 | - | ||
- | 1 Piece(s) | 8 Day(s) | 12 | [Steel] General Structural Steel or Carbon Steel | Not Provided | 25 ～ 500 | - | Not Provided | 6 | - | 6 | - | ||
- | 1 Piece(s) | 8 Day(s) | 15 | [Steel] General Structural Steel or Carbon Steel | Not Provided | 30 ～ 600 | - | Not Provided | 6 | - | 6 | - | ||
- | 1 Piece(s) | 8 Day(s) | 20 | [Steel] General Structural Steel or Carbon Steel | Not Provided | 40 ～ 600 | - | Not Provided | 6 | - | 6 | - | ||
- | 1 Piece(s) | 8 Day(s) | 25 | [Steel] General Structural Steel or Carbon Steel | Not Provided | 55 ～ 700 | - | Not Provided | 6 | - | 6 | - | ||
- | 1 Piece(s) | 8 Day(s) | 30 | [Steel] General Structural Steel or Carbon Steel | Not Provided | 65 ～ 800 | - | Not Provided | 6 | - | 6 | - | ||
- | 1 Piece(s) | 7 Day(s) | 35 | [Steel] General Structural Steel or Carbon Steel | Not Provided | 80 ～ 900 | - | Not Provided | 6 | - | 6 | - | ||
- | 1 Piece(s) | 8 Day(s) | 40 | [Steel] General Structural Steel or Carbon Steel | Not Provided | 80 ～ 1000 | - | Not Provided | - | - | - | - | ||
- | 1 Piece(s) | 8 Day(s) | 50 | [Steel] General Structural Steel or Carbon Steel | Not Provided | 80 ～ 1000 | - | Not Provided | - | - | - | - | ||
- | 1 Piece(s) | 8 Day(s) | 6 | [Steel] General Structural Steel or Carbon Steel | Not Provided | 15 ～ 100 | - | Provided | - | 0 ～ 92 | - | - | ||
- | 1 Piece(s) | 8 Day(s) | 8 | [Steel] General Structural Steel or Carbon Steel | Not Provided | 20 ～ 200 | - | Provided | - | 0 ～ 192 | 6 | - | ||
- | 1 Piece(s) | 36 Day(s) | 10 | [Steel] General Structural Steel or Carbon Steel | Not Provided | 20 ～ 400 | - | Provided | 6 | 0 ～ 392 | 6 | - | ||
- | 1 Piece(s) | 8 Day(s) | 12 | [Steel] General Structural Steel or Carbon Steel | Not Provided | 25 ～ 500 | - | Provided | 6 | 0 ～ 490 | 6 | - | ||
- | 1 Piece(s) | 8 Day(s) | 15 | [Steel] General Structural Steel or Carbon Steel | Not Provided | 30 ～ 600 | - | Provided | 6 | 0 ～ 590 | 6 | - | ||
- | 1 Piece(s) | 8 Day(s) | 20 | [Steel] General Structural Steel or Carbon Steel | Not Provided | 40 ～ 600 | - | Provided | 6 | 0 ～ 590 | 6 | - | ||
- | 1 Piece(s) | 36 Day(s) | 25 | [Steel] General Structural Steel or Carbon Steel | Not Provided | 55 ～ 700 | - | Provided | 6 | 0 ～ 690 | 6 | - | ||
- | 1 Piece(s) | 8 Day(s) | 30 | [Steel] General Structural Steel or Carbon Steel | Not Provided | 65 ～ 800 | - | Provided | 6 | 0 ～ 785 | 6 | - | ||
- | 1 Piece(s) | 7 Day(s) | 35 | [Steel] General Structural Steel or Carbon Steel | Not Provided | 80 ～ 900 | External Thread on One End, Internal Thread on the Other End, with Wrench Slot Type | Provided | 6 | 0 ～ 885 | 6 | 30 | ||
- | 1 Piece(s) | 8 Day(s) | 40 | [Steel] General Structural Steel or Carbon Steel | Not Provided | 80 ～ 1000 | - | Provided | - | 0 ～ 980 | - | - | ||
- | 1 Piece(s) | 8 Day(s) | 50 | [Steel] General Structural Steel or Carbon Steel | Not Provided | 80 ～ 1000 | - | Provided | - | 0 ～ 980 | - | - | ||
- | 1 Piece(s) | 36 Day(s) | 6 | [Steel] General Structural Steel or Carbon Steel | Electroless Nickel Plating | 15 ～ 100 | - | Not Provided | - | - | - | - | ||
- | 1 Piece(s) | 8 Day(s) | 8 | [Steel] General Structural Steel or Carbon Steel | Electroless Nickel Plating | 20 ～ 200 | - | Not Provided | - | - | 6 | - | ||
- | 1 Piece(s) | 8 Day(s) | 10 | [Steel] General Structural Steel or Carbon Steel | Electroless Nickel Plating | 20 ～ 400 | - | Not Provided | 6 | - | 6 | - | ||
- | 1 Piece(s) | 8 Day(s) | 12 | [Steel] General Structural Steel or Carbon Steel | Electroless Nickel Plating | 25 ～ 500 | - | Not Provided | 6 | - | 6 | - | ||
- | 1 Piece(s) | 36 Day(s) | 15 | [Steel] General Structural Steel or Carbon Steel | Electroless Nickel Plating | 30 ～ 600 | - | Not Provided | 6 | - | 6 | - | ||
- | 1 Piece(s) | 8 Day(s) | 20 | [Steel] General Structural Steel or Carbon Steel | Electroless Nickel Plating | 40 ～ 600 | - | Not Provided | 6 | - | 6 | - | ||
- | 1 Piece(s) | 8 Day(s) | 25 | [Steel] General Structural Steel or Carbon Steel | Electroless Nickel Plating | 55 ～ 700 | - | Not Provided | 6 | - | 6 | - | ||
- | 1 Piece(s) | 8 Day(s) | 30 | [Steel] General Structural Steel or Carbon Steel | Electroless Nickel Plating | 65 ～ 800 | - | Not Provided | 6 | - | 6 | - | ||
- | 1 Piece(s) | 7 Day(s) | 35 | [Steel] General Structural Steel or Carbon Steel | Electroless Nickel Plating | 80 ～ 900 | - | Not Provided | 6 | - | 6 | - | ||
- | 1 Piece(s) | 8 Day(s) | 40 | [Steel] General Structural Steel or Carbon Steel | Electroless Nickel Plating | 80 ～ 1000 | - | Not Provided | - | - | - | - | ||
- | 1 Piece(s) | 8 Day(s) | 50 | [Steel] General Structural Steel or Carbon Steel | Electroless Nickel Plating | 80 ～ 1000 | - | Not Provided | - | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | 6 | [Steel] General Structural Steel or Carbon Steel | Electroless Nickel Plating | 15 ～ 100 | - | Provided | - | 0 ～ 92 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | 8 | [Steel] General Structural Steel or Carbon Steel | Electroless Nickel Plating | 20 ～ 200 | - | Provided | - | 0 ～ 192 | 6 | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | [Steel] General Structural Steel or Carbon Steel | Electroless Nickel Plating | 20 ～ 400 | - | Provided | 6 | 0 ～ 392 | 6 | - | ||
- | 1 Piece(s) | 7 Day(s) | 12 | [Steel] General Structural Steel or Carbon Steel | Electroless Nickel Plating | 25 ～ 500 | - | Provided | 6 | - | 6 | - | ||
- | 1 Piece(s) | 7 Day(s) | 15 | [Steel] General Structural Steel or Carbon Steel | Electroless Nickel Plating | 30 ～ 600 | - | Provided | 6 | 0 ～ 590 | 6 | - | ||
- | 1 Piece(s) | 7 Day(s) | 20 | [Steel] General Structural Steel or Carbon Steel | Electroless Nickel Plating | 40 ～ 600 | - | Provided | 6 | 0 ～ 590 | 6 | - | ||
- | 1 Piece(s) | 7 Day(s) | 25 | [Steel] General Structural Steel or Carbon Steel | Electroless Nickel Plating | 55 ～ 700 | - | Provided | 6 | 0 ～ 690 | 6 | - | ||
- | 1 Piece(s) | 7 Day(s) | 30 | [Steel] General Structural Steel or Carbon Steel | Electroless Nickel Plating | 65 ～ 800 | - | Provided | 6 | 0 ～ 785 | 6 | - | ||
- | 1 Piece(s) | 7 Day(s) | 35 | [Steel] General Structural Steel or Carbon Steel | Electroless Nickel Plating | 80 ～ 900 | External Thread on One End, Internal Thread on the Other End, with Wrench Slot Type | Provided | 6 | 0 ～ 885 | 6 | 30 | ||
- | 1 Piece(s) | 8 Day(s) | 40 | [Steel] General Structural Steel or Carbon Steel | Electroless Nickel Plating | 80 ～ 1000 | - | Provided | - | 0 ～ 980 | - | - | ||
- | 1 Piece(s) | 8 Day(s) | 50 | [Steel] General Structural Steel or Carbon Steel | Electroless Nickel Plating | 80 ～ 1000 | - | Provided | - | 0 ～ 980 | - | - | ||
- | 1 Piece(s) | 8 Day(s) | 6 | [Stainless Steel] Austenitic Stainless Steel | Not Provided | 15 ～ 100 | - | Not Provided | - | - | - | - | ||
- | 1 Piece(s) | 8 Day(s) | 8 | [Stainless Steel] Austenitic Stainless Steel | Not Provided | 20 ～ 200 | - | Not Provided | - | - | 6 | - | ||
- | 1 Piece(s) | 8 Day(s) | 10 | [Stainless Steel] Austenitic Stainless Steel | Not Provided | 20 ～ 400 | - | Not Provided | 6 | - | 6 | - | ||
- | 1 Piece(s) | 8 Day(s) | 12 | [Stainless Steel] Austenitic Stainless Steel | Not Provided | 25 ～ 500 | - | Not Provided | 6 | - | 6 | - | ||
- | 1 Piece(s) | 8 Day(s) | 15 | [Stainless Steel] Austenitic Stainless Steel | Not Provided | 30 ～ 600 | - | Not Provided | 6 | - | 6 | - | ||
- | 1 Piece(s) | 8 Day(s) | 20 | [Stainless Steel] Austenitic Stainless Steel | Not Provided | 40 ～ 600 | - | Not Provided | 6 | - | 6 | - | ||
- | 1 Piece(s) | 8 Day(s) | 25 | [Stainless Steel] Austenitic Stainless Steel | Not Provided | 55 ～ 700 | - | Not Provided | 6 | - | 6 | - | ||
- | 1 Piece(s) | 8 Day(s) | 30 | [Stainless Steel] Austenitic Stainless Steel | Not Provided | 65 ～ 800 | - | Not Provided | 6 | - | 6 | - | ||
- | 1 Piece(s) | 7 Day(s) | 6 | [Stainless Steel] Austenitic Stainless Steel | Not Provided | 15 ～ 100 | - | Provided | - | 0 ～ 92 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | 8 | [Stainless Steel] Austenitic Stainless Steel | Not Provided | 20 ～ 200 | - | Provided | - | 0 ～ 192 | 6 | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | [Stainless Steel] Austenitic Stainless Steel | Not Provided | 20 ～ 400 | - | Provided | 6 | 0 ～ 392 | 6 | - | ||
- | 1 Piece(s) | 7 Day(s) | 12 | [Stainless Steel] Austenitic Stainless Steel | Not Provided | 25 ～ 500 | - | Provided | 6 | 0 ～ 490 | 6 | - | ||
- | 1 Piece(s) | 7 Day(s) | 15 | [Stainless Steel] Austenitic Stainless Steel | Not Provided | 30 ～ 600 | - | Provided | 6 | 0 ～ 590 | 6 | - | ||
- | 1 Piece(s) | 7 Day(s) | 20 | [Stainless Steel] Austenitic Stainless Steel | Not Provided | 40 ～ 600 | - | Provided | 6 | 0 ～ 590 | 6 | - | ||
- | 1 Piece(s) | 7 Day(s) | 25 | [Stainless Steel] Austenitic Stainless Steel | Not Provided | 55 ～ 700 | - | Provided | 6 | 0 ～ 690 | 6 | - | ||
- | 1 Piece(s) | 7 Day(s) | 30 | [Stainless Steel] Austenitic Stainless Steel | Not Provided | 65 ～ 800 | - | Provided | 6 | 0 ～ 785 | 6 | - |
Loading...
Basic Information
| Type Details | Circular | End Shape (Left) | Threaded | End Shape (Right) | Tapped |
|---|---|---|---|---|---|
| Post Type | Solid | Scale | Without Scale | Pilot (Concave-Convex at End) | Not Provided |
| Gas Vent Hole | Not Provided |
Specification/Dimensions
-
Outer Dia. D(Ø)
-
Material
- Steel
- Stainless Steel
- Steel
-
Surface Treatment
- Not Provided
- Black Oxide
- Electroless Nickel Plating
-
Length L(mm)
-
Type
- External Thread on One End, Internal Thread on the Other End, with Wrench Slot Type
-
Wrench Flatted
- Not Provided
- Provided
-
Thread Diameter N(mm)
-
Distance to Wrench Slot [SC](mm)
-
Thread Diameter M(mm)
-
type
- E-ETKH
- E-ETKHS
- E-NETH
- E-NETHS
- E-PETH
- E-PETHS
- E-SETH
- E-SETHS
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 7 Day(s) or Less
- 8 Day(s) or Less
- 36 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Posts for Stands - With Scale - Hollow
- Connecting Tube for the Connecting Clamp (CC60CT)
- Original Pipe / Shaft, Square Shaft
- D-Sub Connector Mounting Spacer/DSB-E
- PTFE Spacer (Round) / ART
- Aluminum Spacer (Hexagonal/Black Anodized) / ASL-BE
- Duracon Spacer (Hexagonal) BS
- Stainless Steel Spacer (Hexagonal and Double-Ended Male Thread) ESU
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy