(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Bushings for Inspection Jigs, Shouldered, D-Shaped Hole (Part Numbers)
Part Number
Configured Part Number is shown.
Dimensional Drawing
Material Specification
| [ M ] Material | [ H ] Hardness | [ S ] Surface Treatment | ②Shouldered Type | |
| Type | Material Code | |||
| Equivalent to SKS93 | 50～60HRC | - | (P＋0.03 ＋0.01/F＋0.05 0) E-KJB (PH8/F＋0.03 0) E-KJBH | STK |
| Martensitic stainless steel | 45～50HRC | - | STKC | |
Specification Table
Please select 1 item from Type, Material Code and D Dimension respectively.
[ ! ]1 For Austenitic Stainless Steel, there must be a 2mm or greater wall thickness (D-P/2≥2) between D-shaped hole and outer diameter.
| Part Number | Common to all models | Only ②Shouldered Type | |||||||
| Type | Material Code | D | P 0.01mm increments | F(F＜P/2) 0.1mm increments | L 1mm increments | T Selection | H | ||
| Shouldered Type | |||||||||
| (P＋0.03 ＋0.01/F＋0.05 0) E-KJB (PH8/F＋0.03 0) E-KJBH | STK STKC[ ! ]1 | 8 | 3.00～ 5.00 | 0.3～ 2.4 | 5~25 | 2 | 3 | 5 | D＋4 |
| 10 | 3.00～ 7.00 | 0.3～ 3.0 | |||||||
| 12 | 3.00～ 9.00 | 0.5～ 4.0 | |||||||
| 16 | 4.00~13.00 | 0.5～ 6.0 | |||||||
| 20 | 6.00~17.00 | 1.0～ 8.0 | |||||||
| 25 | 8.00~21.00 | 2.0~10.0 | |||||||
| P | H8 |
| 3.00~6.00 | +0.018 0 |
| 6.01~10.00 | +0.022 0 |
| 10.01~18.00 | +0.027 0 |
| 18.01~21.00 | +0.033 0 |
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| E-KJBHSTK8-P[3-5/0.01]-F[0.3-3/0.1]-L[5-25/1]-T[2,3,5] |
| E-KJBHSTK10-P[3-7/0.01]-F[0.3-3/0.1]-L[5-25/1]-T[2,3,5] |
| E-KJBHSTK12-P[3-9/0.01]-F[0.1-4/0.1]-L[5-25/1]-T[2,3,5] |
| E-KJBHSTK16-P[4-13/0.01]-F[0.5-6/0.1]-L[5-25/1]-T[2,3,5] |
| E-KJBHSTK20-P[6-17/0.01]-F[1-8/0.1]-L[5-25/1]-T[2,3,5] |
| E-KJBHSTK25-P[8-21/0.01]-F[2-10/0.1]-L[5-25/1]-T[2,3,5] |
| E-KJBHSTKC8-P[3-5/0.01]-F[0.3-3/0.1]-L[5-25/1]-T[2,3,5] |
| E-KJBHSTKC10-P[3-7/0.01]-F[0.3-3/0.1]-L[5-25/1]-T[2,3,5] |
| E-KJBHSTKC12-P[3-9/0.01]-F[0.5-4/0.1]-L[5-25/1]-T[2,3,5] |
| E-KJBHSTKC16-P[4-13/0.01]-F[0.5-6/0.1]-L[5-25/1]-T[2,3,5] |
| E-KJBHSTKC20-P[6-17/0.01]-F[1-8/0.1]-L[5-25/1]-T[2,3,5] |
| E-KJBHSTKC25-P[8-21/0.01]-F[2-10/0.1]-L[5-25/1]-T[2,3,5] |
| E-KJBSTK8-P[3-5/0.01]-F[0.3-3/0.1]-L[5-25/1]-T[2,3,5] |
| E-KJBSTK10-P[3-7/0.01]-F[0.3-3/0.1]-L[5-25/1]-T[2,3,5] |
| E-KJBSTK12-P[3-9/0.01]-F[0.1-4/0.1]-L[5-25/1]-T[2,3,5] |
| E-KJBSTK16-P[4-13/0.01]-F[0.5-6/0.1]-L[5-25/1]-T[2,3,5] |
| E-KJBSTK20-P[6-17/0.01]-F[1-8/0.1]-L[5-25/1]-T[2,3,5] |
| E-KJBSTK25-P[8-21/0.01]-F[2-10/0.1]-L[5-25/1]-T[2,3,5] |
| E-KJBSTKC8-P[3-5/0.01]-F[0.3-3/0.1]-L[5-25/1]-T[2,3,5] |
| E-KJBSTKC10-P[3-7/0.01]-F[0.3-3/0.1]-L[5-25/1]-T[2,3,5] |
| E-KJBSTKC12-P[3-9/0.01]-F[0.5-4/0.1]-L[5-25/1]-T[2,3,5] |
| E-KJBSTKC16-P[4-13/0.01]-F[0.5-6/0.1]-L[5-25/1]-T[2,3,5] |
| E-KJBSTKC20-P[6-17/0.01]-F[1-8/0.1]-L[5-25/1]-T[2,3,5] |
| E-KJBSTKC25-P[8-21/0.01]-F[2-10/0.1]-L[5-25/1]-T[2,3,5] |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Material | Material | Hardness (Detail) | I.D. Tolerance | Bushing Diameter D (φ) | I.D. P (D) (φ) | Total length L (D) (mm) | F (mm) | Shoulder Thickness T (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | 7 Day(s) | Steel | Alloy tool steel or bearing steel | 50～60HRC | H8 | 8 | 3 ～ 5 | 5 ～ 25 | 0.3 ～ 3 | 2 ～ 5 | ||
- | 1 Piece(s) | 7 Day(s) | Steel | Alloy tool steel or bearing steel | 50～60HRC | H8 | 10 | 3 ～ 7 | 5 ～ 25 | 0.3 ～ 3 | 2 ～ 5 | ||
- | 1 Piece(s) | 7 Day(s) | Steel | Alloy tool steel or bearing steel | 50～60HRC | H8 | 12 | 3 ～ 9 | 5 ～ 25 | 0.1 ～ 4 | 2 ～ 5 | ||
- | 1 Piece(s) | 7 Day(s) | Steel | Alloy tool steel or bearing steel | 50～60HRC | H8 | 16 | 4 ～ 13 | 5 ～ 25 | 0.5 ～ 6 | 2 ～ 5 | ||
- | 1 Piece(s) | 7 Day(s) | Steel | Alloy tool steel or bearing steel | 50～60HRC | H8 | 20 | 6 ～ 17 | 5 ～ 25 | 1 ～ 8 | 2 ～ 5 | ||
- | 1 Piece(s) | 7 Day(s) | Steel | Alloy tool steel or bearing steel | 50～60HRC | H8 | 25 | 8 ～ 21 | 5 ～ 25 | 2 ～ 10 | 2 ～ 5 | ||
- | 1 Piece(s) | 7 Day(s) | Stainless Steel | Martensite stainless steel | 45～50HRC | H8 | 8 | 3 ～ 5 | 5 ～ 25 | 0.3 ～ 3 | 2 ～ 5 | ||
- | 1 Piece(s) | 7 Day(s) | Stainless Steel | Martensite stainless steel | 45～50HRC | H8 | 10 | 3 ～ 7 | 5 ～ 25 | 0.3 ～ 3 | 2 ～ 5 | ||
- | 1 Piece(s) | 7 Day(s) | Stainless Steel | Martensite stainless steel | 45～50HRC | H8 | 12 | 3 ～ 9 | 5 ～ 25 | 0.5 ～ 4 | 2 ～ 5 | ||
- | 1 Piece(s) | 7 Day(s) | Stainless Steel | Martensite stainless steel | 45～50HRC | H8 | 16 | 4 ～ 13 | 5 ～ 25 | 0.5 ～ 6 | 2 ～ 5 | ||
- | 1 Piece(s) | 7 Day(s) | Stainless Steel | Martensite stainless steel | 45～50HRC | H8 | 20 | 6 ～ 17 | 5 ～ 25 | 1 ～ 8 | 2 ～ 5 | ||
- | 1 Piece(s) | 7 Day(s) | Stainless Steel | Martensite stainless steel | 45～50HRC | H8 | 25 | 8 ～ 21 | 5 ～ 25 | 2 ～ 10 | 2 ～ 5 | ||
- | 1 Piece(s) | 7 Day(s) | Steel | Alloy tool steel or bearing steel | 50～60HRC | +0.03/+0.01 | 8 | 3 ～ 5 | 5 ～ 25 | 0.3 ～ 3 | 2 ～ 5 | ||
- | 1 Piece(s) | 7 Day(s) | Steel | Alloy tool steel or bearing steel | 50～60HRC | +0.03/+0.01 | 10 | 3 ～ 7 | 5 ～ 25 | 0.3 ～ 3 | 2 ～ 5 | ||
- | 1 Piece(s) | 7 Day(s) | Steel | Alloy tool steel or bearing steel | 50～60HRC | +0.03/+0.01 | 12 | 3 ～ 9 | 5 ～ 25 | 0.1 ～ 4 | 2 ～ 5 | ||
- | 1 Piece(s) | 7 Day(s) | Steel | Alloy tool steel or bearing steel | 50～60HRC | +0.03/+0.01 | 16 | 4 ～ 13 | 5 ～ 25 | 0.5 ～ 6 | 2 ～ 5 | ||
- | 1 Piece(s) | 7 Day(s) | Steel | Alloy tool steel or bearing steel | 50～60HRC | +0.03/+0.01 | 20 | 6 ～ 17 | 5 ～ 25 | 1 ～ 8 | 2 ～ 5 | ||
- | 1 Piece(s) | 7 Day(s) | Steel | Alloy tool steel or bearing steel | 50～60HRC | +0.03/+0.01 | 25 | 8 ～ 21 | 5 ～ 25 | 2 ～ 10 | 2 ～ 5 | ||
- | 1 Piece(s) | 7 Day(s) | Stainless Steel | Martensite stainless steel | 45～50HRC | +0.03/+0.01 | 8 | 3 ～ 5 | 5 ～ 25 | 0.3 ～ 3 | 2 ～ 5 | ||
- | 1 Piece(s) | 7 Day(s) | Stainless Steel | Martensite stainless steel | 45～50HRC | +0.03/+0.01 | 10 | 3 ～ 7 | 5 ～ 25 | 0.3 ～ 3 | 2 ～ 5 | ||
- | 1 Piece(s) | 7 Day(s) | Stainless Steel | Martensite stainless steel | 45～50HRC | +0.03/+0.01 | 12 | 3 ～ 9 | 5 ～ 25 | 0.5 ～ 4 | 2 ～ 5 | ||
- | 1 Piece(s) | 7 Day(s) | Stainless Steel | Martensite stainless steel | 45～50HRC | +0.03/+0.01 | 16 | 4 ～ 13 | 5 ～ 25 | 0.5 ～ 6 | 2 ～ 5 | ||
- | 1 Piece(s) | 7 Day(s) | Stainless Steel | Martensite stainless steel | 45～50HRC | +0.03/+0.01 | 20 | 6 ～ 17 | 5 ～ 25 | 1 ～ 8 | 2 ～ 5 | ||
- | 1 Piece(s) | 7 Day(s) | Stainless Steel | Martensite stainless steel | 45～50HRC | +0.03/+0.01 | 25 | 8 ～ 21 | 5 ～ 25 | 2 ～ 10 | 2 ～ 5 |
Loading...
Basic Information
| Basic Shape | Shouldered | Hole Shape | D Cut (D-Shape) | Hole Type | Straight |
|---|---|---|---|---|---|
| With or w/o Tap | Not Tapped | O.D. Tolerance | Standard | Surface Treatment | Not Provided |
| Hardness | Provided | Type | Shoulder Shape |
Specification/Dimensions
-
Material
- Steel
- Stainless Steel
-
Material
- Alloy tool steel or bearing steel
- Martensite stainless steel
-
Hardness (Detail)
- 45～50HRC
- 50～60HRC
-
I.D. Tolerance
- +0.03/+0.01
- H8
-
Bushing Diameter D(φ)
- 8
- 10
- 12
- 16
- 20
- 25
-
I.D. P (D)(φ)
-
Total length L (D)(mm)
-
F(mm)
-
Shoulder Thickness T(mm)
-
type
- E-KJBHSTK
- E-KJBHSTKC
- E-KJBSTK
- E-KJBSTKC
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 7 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Bushings for Inspection Components - Threaded Bushings
- Bushings for Inspection Components - Shouldered - Standard Type
- Bushings for Inspection Components - Stepped and Threaded for Taper Pins - For Tapered (Round)
- Bushings for Inspection Components - Stepped and Threaded for Taper Pins - Tapered Type with Shoulder (Dowel Pin)
- Bushings for Inspection Components - Oval - Shouldered (Dowel Pin / D Cut)
- Bushings for Locating Pins-High Hardness Stainless Steel/Straight
- Bushings for Inspection Components-Stepped Straight/Shouldered
- Bushing, Straight, Press-In Type
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy