[Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Bushings for Inspection Jig, Shouldered, Slotted, Dowel Pin/D Cut (Part Numbers)

MISUMI

MiSUMi Economy

MISUMI

RoHS

Part Number

Configured Part Number is shown.

Drawing/Specifications
3D Preview
Part Numbers

Dimensional Drawing

Bushings for Inspection Jigs Slotted Hole: Related Image

Material Specification

	[ M ] Material	[ H ] Hardness	Shouldered Type
			Type	Material Code
Rotation Stopper Type	Alloy tool steel or bearing steel	50HRC~	(P＋0.03 ＋0.01/W＋0.03 ＋0.01) E-KJB (P_H8/W_H8) E-KJBH	STC
	Austenitic stainless steel	-		STCS
	Martensitic stainless steel	45HRC～		STCC
Single Side Cut Type	Alloy tool steel or bearing steel	50HRC~	(P＋0.03 ＋0.01/W＋0.03 ＋0.01) E-KJB (P_H8/W_H8) E-KJBH	STCD
	Martensitic stainless steel	45HRC~		STCDC

Specification Table

Please select 1 item from Type, Material Code and D Dimension respectively (For details, refer to the Ordering Example below).

Part Number				Common to all models				Only Shouldered Type
Type	Material Code		D	0.01mm increments		L	R	T			H
	Shouldered/Rotation Stopper Type	Shouldered/Single Side Cut Type		P	W	1mm increments		Selection
(P＋0.03 ＋0.01/W＋0.03 ＋0.01) E-KJB (P_H8/W_H8) E-KJBH	STC STCS STCC	STCD STCDC	8[ ! ]3	4.00~6.00	P＞W (W≥3.00)	(Shouldered) 10~20	2.0	2	3	5	D＋4
			10	4.00~8.00
			12	4.00~10.00
			16	6.00~14.00
			20	10.00~18.00
			25	14.00~22.00

[ ! ]3 Only shouldered type is applicable to D＝8.

P, W	H8
3.00~6.00	0 -0.014
6.01~10.00	0 -0.018
10.01~18.00	0 -0.022
18.01~27.00	0 -0.027

If there are requirements for rust prevention, give priority to the hard-chrome plated products, products with surface treatment of electroless nickel plating or products made of stainless steel.

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 60; 90

Part Number
E-KJBHSTC8-P[4-6/0.01]-W[3-5.99/0.01]-L[10-20/1]-T[2,3,5]
E-KJBHSTC10-P[4-8/0.01]-W[3-7.99/0.01]-L[10-20/1]-T[2,3,5]
E-KJBHSTC12-P[4-10/0.01]-W[3-9.99/0.01]-L[10-20/1]-T[2,3,5]
E-KJBHSTC16-P[6-14/0.01]-W[3-13.99/0.01]-L[10-20/1]-T[2,3,5]
E-KJBHSTC20-P[10-18/0.01]-W[3-17.99/0.01]-L[10-20/1]-T[2,3,5]
E-KJBHSTC25-P[14-22/0.01]-W[3-21.99/0.01]-L[10-20/1]-T[2,3,5]
E-KJBHSTCC8-P[4-6/0.01]-W[3-5.99/0.01]-L[10-20/1]-T[2,3,5]
E-KJBHSTCC10-P[4-8/0.01]-W[3-7.99/0.01]-L[10-20/1]-T[2,3,5]
E-KJBHSTCC12-P[4-10/0.01]-W[3-9.99/0.01]-L[10-20/1]-T[2,3,5]
E-KJBHSTCC16-P[6-14/0.01]-W[3-13.99/0.01]-L[10-20/1]-T[2,3,5]
E-KJBHSTCC20-P[10-18/0.01]-W[3-17.99/0.01]-L[10-20/1]-T[2,3,5]
E-KJBHSTCC25-P[14-22/0.01]-W[3-21.99/0.01]-L[10-20/1]-T[2,3,5]
E-KJBHSTCD8-P[4-6/0.01]-W[3-5.99/0.01]-L[10-20/1]-T[2,3,5]
E-KJBHSTCD10-P[4-8/0.01]-W[3-7.99/0.01]-L[10-20/1]-T[2,3,5]
E-KJBHSTCD12-P[4-10/0.01]-W[3-9.99/0.01]-L[10-20/1]-T[2,3,5]
E-KJBHSTCD16-P[6-14/0.01]-W[3-13.99/0.01]-L[10-20/1]-T[2,3,5]
E-KJBHSTCD20-P[10-18/0.01]-W[3-17.99/0.01]-L[10-20/1]-T[2,3,5]
E-KJBHSTCD25-P[14-22/0.01]-W[3-21.99/0.01]-L[10-20/1]-T[2,3,5]
E-KJBHSTCDC8-P[4-6/0.01]-W[3-5.99/0.01]-L[10-20/1]-T[2,3,5]
E-KJBHSTCDC10-P[4-8/0.01]-W[3-7.99/0.01]-L[10-20/1]-T[2,3,5]
E-KJBHSTCDC12-P[4-10/0.01]-W[3-9.99/0.01]-L[10-20/1]-T[2,3,5]
E-KJBHSTCDC16-P[6-14/0.01]-W[3-13.99/0.01]-L[10-20/1]-T[2,3,5]
E-KJBHSTCDC20-P[10-18/0.01]-W[3-17.99/0.01]-L[10-20/1]-T[2,3,5]
E-KJBHSTCDC25-P[14-22/0.01]-W[3-21.99/0.01]-L[10-20/1]-T[2,3,5]
E-KJBHSTCS8-P[4-6/0.01]-W[3-5.99/0.01]-L[10-20/1]-T[2,3,5]
E-KJBHSTCS10-P[4-8/0.01]-W[3-7.99/0.01]-L[10-20/1]-T[2,3,5]
E-KJBHSTCS12-P[4-10/0.01]-W[3-9.99/0.01]-L[10-20/1]-T[2,3,5]
E-KJBHSTCS16-P[6-14/0.01]-W[3-13.99/0.01]-L[10-20/1]-T[2,3,5]
E-KJBHSTCS20-P[10-18/0.01]-W[3-17.99/0.01]-L[10-20/1]-T[2,3,5]
E-KJBHSTCS25-P[14-22/0.01]-W[3-21.99/0.01]-L[10-20/1]-T[2,3,5]
E-KJBSTC8-P[4-6/0.01]-W[3-5.99/0.01]-L[10-20/1]-T[2,3,5]
E-KJBSTC10-P[4-8/0.01]-W[3-8/0.01]-L[10-20/1]-T[2,3,5]
E-KJBSTC12-P[4-10/0.01]-W[3-10/0.01]-L[10-20/1]-T[2,3,5]
E-KJBSTC16-P[6-14/0.01]-W[3-14/0.01]-L[10-20/1]-T[2,3,5]
E-KJBSTC20-P[10-18/0.01]-W[3-18/0.01]-L[10-20/1]-T[2,3,5]
E-KJBSTC25-P[14-22/0.01]-W[3-22/0.01]-L[10-20/1]-T[2,3,5]
E-KJBSTCC8-P[4-6/0.01]-W[3-5.99/0.01]-L[10-20/1]-T[2,3,5]
E-KJBSTCC10-P[4-8/0.01]-W[3-7.99/0.01]-L[10-20/1]-T[2,3,5]
E-KJBSTCC12-P[4-10/0.01]-W[3-9.99/0.01]-L[10-20/1]-T[2,3,5]
E-KJBSTCC16-P[6-14/0.01]-W[3-13.99/0.01]-L[10-20/1]-T[2,3,5]
E-KJBSTCC20-P[10-18/0.01]-W[3-17.99/0.01]-L[10-20/1]-T[2,3,5]
E-KJBSTCC25-P[14-22/0.01]-W[3-21.99/0.01]-L[10-20/1]-T[2,3,5]
E-KJBSTCD8-P[4-6/0.01]-W[3-5.99/0.01]-L[10-20/1]-T[2,3,5]
E-KJBSTCD10-P[4-8/0.01]-W[3-7.99/0.01]-L[10-20/1]-T[2,3,5]
E-KJBSTCD12-P[4-10/0.01]-W[3-9.99/0.01]-L[10-20/1]-T[2,3,5]
E-KJBSTCD16-P[6-14/0.01]-W[3-13.99/0.01]-L[10-20/1]-T[2,3,5]
E-KJBSTCD20-P[10-18/0.01]-W[3-17.99/0.01]-L[10-20/1]-T[2,3,5]
E-KJBSTCD25-P[15-22/0.01]-W[3-21.99/0.01]-L[10-20/1]-T[2,3,5]
E-KJBSTCDC8-P[4-6/0.01]-W[3-5.99/0.01]-L[10-20/1]-T[2,3,5]
E-KJBSTCDC10-P[4-8/0.01]-W[3-7.99/0.01]-L[10-20/1]-T[2,3,5]
E-KJBSTCDC12-P[4-10/0.01]-W[3-9.99/0.01]-L[10-20/1]-T[2,3,5]
E-KJBSTCDC16-P[6-14/0.01]-W[3-13.99/0.01]-L[10-20/1]-T[2,3,5]
E-KJBSTCDC20-P[10-18/0.01]-W[3-17.99/0.01]-L[10-20/1]-T[2,3,5]
E-KJBSTCDC25-P[14-22/0.01]-W[3-21.99/0.01]-L[10-20/1]-T[2,3,5]
E-KJBSTCS8-P[4-6/0.01]-W[3-5.99/0.01]-L[10-20/1]-T[2,3,5]
E-KJBSTCS10-P[4-8/0.01]-W[3-7.99/0.01]-L[10-20/1]-T[2,3,5]
E-KJBSTCS12-P[4-10/0.01]-W[3-9.99/0.01]-L[10-20/1]-T[2,3,5]
E-KJBSTCS16-P[6-14/0.01]-W[3-13.99/0.01]-L[10-20/1]-T[2,3,5]
E-KJBSTCS20-P[10-18/0.01]-W[3-17.99/0.01]-L[10-20/1]-T[2,3,5]
E-KJBSTCS25-P[14-22/0.01]-W[3-21.99/0.01]-L[10-20/1]-T[2,3,5]

Standard Unit Price	Minimum order quantity	Days to Ship	Material	Hardness	Material	Hardness (Detail)	Type	I.D. Tolerance	Bushing Diameter D (φ)	I.D. P (D) (φ)	Total length L (D) (mm)	W (mm)	T (mm)
-	1 Piece(s)	7 Day(s)	Steel	Provided	Alloy tool steel or bearing steel	50～60HRC	Locating Pin, Rotation Stopper, Shouldered	H8	8	4 ～ 6	10 ～ 20	3 ～ 5.99	2 ～ 5
-	1 Piece(s)	7 Day(s)	Steel	Provided	Alloy tool steel or bearing steel	50～60HRC	Locating Pin, Rotation Stopper, Shouldered	H8	10	4 ～ 8	10 ～ 20	3 ～ 7.99	2 ～ 5
-	1 Piece(s)	7 Day(s)	Steel	Provided	Alloy tool steel or bearing steel	50～60HRC	Locating Pin, Rotation Stopper, Shouldered	H8	12	4 ～ 10	10 ～ 20	3 ～ 9.99	2 ～ 5
-	1 Piece(s)	7 Day(s)	Steel	Provided	Alloy tool steel or bearing steel	50～60HRC	Locating Pin, Rotation Stopper, Shouldered	H8	16	6 ～ 14	10 ～ 20	3 ～ 13.99	2 ～ 5
-	1 Piece(s)	7 Day(s)	Steel	Provided	Alloy tool steel or bearing steel	50～60HRC	Locating Pin, Rotation Stopper, Shouldered	H8	20	10 ～ 18	10 ～ 20	3 ～ 17.99	2 ～ 5
-	1 Piece(s)	7 Day(s)	Steel	Provided	Alloy tool steel or bearing steel	50～60HRC	Locating Pin, Rotation Stopper, Shouldered	H8	25	14 ～ 22	10 ～ 20	3 ～ 21.99	2 ～ 5
-	1 Piece(s)	7 Day(s)	Stainless Steel	Provided	Equivalent to SUS440C	45～50HRC	Locating Pin, Rotation Stopper, Shouldered	H8	8	4 ～ 6	10 ～ 20	3 ～ 5.99	2 ～ 5
-	1 Piece(s)	7 Day(s)	Stainless Steel	Provided	Equivalent to SUS440C	45～50HRC	Locating Pin, Rotation Stopper, Shouldered	H8	10	4 ～ 8	10 ～ 20	3 ～ 7.99	2 ～ 5
-	1 Piece(s)	7 Day(s)	Stainless Steel	Provided	Equivalent to SUS440C	45～50HRC	Locating Pin, Rotation Stopper, Shouldered	H8	12	4 ～ 10	10 ～ 20	3 ～ 9.99	2 ～ 5
-	1 Piece(s)	7 Day(s)	Stainless Steel	Provided	Equivalent to SUS440C	45～50HRC	Locating Pin, Rotation Stopper, Shouldered	H8	16	6 ～ 14	10 ～ 20	3 ～ 13.99	2 ～ 5
-	1 Piece(s)	7 Day(s)	Stainless Steel	Provided	Equivalent to SUS440C	45～50HRC	Locating Pin, Rotation Stopper, Shouldered	H8	20	10 ～ 18	10 ～ 20	3 ～ 17.99	2 ～ 5
-	1 Piece(s)	7 Day(s)	Stainless Steel	Provided	Equivalent to SUS440C	45～50HRC	Locating Pin, Rotation Stopper, Shouldered	H8	25	14 ～ 22	10 ～ 20	3 ～ 21.99	2 ～ 5
-	1 Piece(s)	7 Day(s)	Steel	Provided	Alloy tool steel or bearing steel	50～60HRC	One Side Cutting Edge, Shouldered	H8	8	4 ～ 6	10 ～ 20	3 ～ 5.99	2 ～ 5
-	1 Piece(s)	7 Day(s)	Steel	Provided	Alloy tool steel or bearing steel	50～60HRC	One Side Cutting Edge, Shouldered	H8	10	4 ～ 8	10 ～ 20	3 ～ 7.99	2 ～ 5
-	1 Piece(s)	7 Day(s)	Steel	Provided	Alloy tool steel or bearing steel	50～60HRC	One Side Cutting Edge, Shouldered	H8	12	4 ～ 10	10 ～ 20	3 ～ 9.99	2 ～ 5
-	1 Piece(s)	7 Day(s)	Steel	Provided	Alloy tool steel or bearing steel	50～60HRC	One Side Cutting Edge, Shouldered	H8	16	6 ～ 14	10 ～ 20	3 ～ 13.99	2 ～ 5
-	1 Piece(s)	7 Day(s)	Steel	Provided	Alloy tool steel or bearing steel	50～60HRC	One Side Cutting Edge, Shouldered	H8	20	10 ～ 18	10 ～ 20	3 ～ 17.99	2 ～ 5
-	1 Piece(s)	7 Day(s)	Steel	Provided	Alloy tool steel or bearing steel	50～60HRC	One Side Cutting Edge, Shouldered	H8	25	14 ～ 22	10 ～ 20	3 ～ 21.99	2 ～ 5
-	1 Piece(s)	7 Day(s)	-	-	-	-	-	-	-	4 ～ 6	10 ～ 20	3 ～ 5.99	2 ～ 5
-	1 Piece(s)	7 Day(s)	-	-	-	-	-	-	-	4 ～ 8	10 ～ 20	3 ～ 7.99	2 ～ 5
-	1 Piece(s)	7 Day(s)	-	-	-	-	-	-	-	4 ～ 10	10 ～ 20	3 ～ 9.99	2 ～ 5
-	1 Piece(s)	7 Day(s)	-	-	-	-	-	-	-	6 ～ 14	10 ～ 20	3 ～ 13.99	2 ～ 5
-	1 Piece(s)	7 Day(s)	-	-	-	-	-	-	-	10 ～ 18	10 ～ 20	3 ～ 17.99	2 ～ 5
-	1 Piece(s)	7 Day(s)	-	-	-	-	-	-	-	14 ～ 22	10 ～ 20	3 ～ 21.99	2 ～ 5
-	1 Piece(s)	7 Day(s)	-	-	-	-	-	-	-	4 ～ 6	10 ～ 20	3 ～ 5.99	2 ～ 5
-	1 Piece(s)	7 Day(s)	-	-	-	-	-	-	-	4 ～ 8	10 ～ 20	3 ～ 7.99	2 ～ 5
-	1 Piece(s)	7 Day(s)	-	-	-	-	-	-	-	4 ～ 10	10 ～ 20	3 ～ 9.99	2 ～ 5
-	1 Piece(s)	7 Day(s)	-	-	-	-	-	-	-	6 ～ 14	10 ～ 20	3 ～ 13.99	2 ～ 5
-	1 Piece(s)	7 Day(s)	-	-	-	-	-	-	-	10 ～ 18	10 ～ 20	3 ～ 17.99	2 ～ 5
-	1 Piece(s)	7 Day(s)	-	-	-	-	-	-	-	14 ～ 22	10 ～ 20	3 ～ 21.99	2 ～ 5
-	1 Piece(s)	7 Day(s)	Steel	Provided	Alloy tool steel or bearing steel	50～60HRC	Locating Pin, Rotation Stopper, Shouldered	+0.03/+0.01	8	4 ～ 6	10 ～ 20	3 ～ 5.99	2 ～ 5
-	1 Piece(s)	7 Day(s)	Steel	Provided	Alloy tool steel or bearing steel	50～60HRC	Locating Pin, Rotation Stopper, Shouldered	+0.03/+0.01	10	4 ～ 8	10 ～ 20	3 ～ 8	2 ～ 5
-	1 Piece(s)	7 Day(s)	Steel	Provided	Alloy tool steel or bearing steel	50～60HRC	Locating Pin, Rotation Stopper, Shouldered	+0.03/+0.01	12	4 ～ 10	10 ～ 20	3 ～ 10	2 ～ 5
-	1 Piece(s)	7 Day(s)	Steel	Provided	Alloy tool steel or bearing steel	50～60HRC	Locating Pin, Rotation Stopper, Shouldered	+0.03/+0.01	16	6 ～ 14	10 ～ 20	3 ～ 14	2 ～ 5
-	1 Piece(s)	7 Day(s)	Steel	Provided	Alloy tool steel or bearing steel	50～60HRC	Locating Pin, Rotation Stopper, Shouldered	+0.03/+0.01	20	10 ～ 18	10 ～ 20	3 ～ 18	2 ～ 5
-	1 Piece(s)	7 Day(s)	Steel	Provided	Alloy tool steel or bearing steel	50～60HRC	Locating Pin, Rotation Stopper, Shouldered	+0.03/+0.01	25	14 ～ 22	10 ～ 20	3 ～ 22	2 ～ 5
-	1 Piece(s)	7 Day(s)	Stainless Steel	Provided	Equivalent to SUS440C	45～50HRC	Locating Pin, Rotation Stopper, Shouldered	+0.03/+0.01	8	4 ～ 6	10 ～ 20	3 ～ 5.99	2 ～ 5
-	1 Piece(s)	7 Day(s)	Stainless Steel	Provided	Equivalent to SUS440C	45～50HRC	Locating Pin, Rotation Stopper, Shouldered	+0.03/+0.01	10	4 ～ 8	10 ～ 20	3 ～ 7.99	2 ～ 5
-	1 Piece(s)	7 Day(s)	Stainless Steel	Provided	Equivalent to SUS440C	45～50HRC	Locating Pin, Rotation Stopper, Shouldered	+0.03/+0.01	12	4 ～ 10	10 ～ 20	3 ～ 9.99	2 ～ 5
-	1 Piece(s)	7 Day(s)	Stainless Steel	Provided	Equivalent to SUS440C	45～50HRC	Locating Pin, Rotation Stopper, Shouldered	+0.03/+0.01	16	6 ～ 14	10 ～ 20	3 ～ 13.99	2 ～ 5
-	1 Piece(s)	7 Day(s)	Stainless Steel	Provided	Equivalent to SUS440C	45～50HRC	Locating Pin, Rotation Stopper, Shouldered	+0.03/+0.01	20	10 ～ 18	10 ～ 20	3 ～ 17.99	2 ～ 5
-	1 Piece(s)	7 Day(s)	Stainless Steel	Provided	Equivalent to SUS440C	45～50HRC	Locating Pin, Rotation Stopper, Shouldered	+0.03/+0.01	25	14 ～ 22	10 ～ 20	3 ～ 21.99	2 ～ 5
-	1 Piece(s)	7 Day(s)	Steel	Provided	Alloy tool steel or bearing steel	50～60HRC	One Side Cutting Edge, Shouldered	+0.03/+0.01	8	4 ～ 6	10 ～ 20	3 ～ 5.99	2 ～ 5
-	1 Piece(s)	7 Day(s)	Steel	Provided	Alloy tool steel or bearing steel	50～60HRC	One Side Cutting Edge, Shouldered	+0.03/+0.01	10	4 ～ 8	10 ～ 20	3 ～ 7.99	2 ～ 5
-	1 Piece(s)	7 Day(s)	Steel	Provided	Alloy tool steel or bearing steel	50～60HRC	One Side Cutting Edge, Shouldered	+0.03/+0.01	12	4 ～ 10	10 ～ 20	3 ～ 9.99	2 ～ 5
-	1 Piece(s)	7 Day(s)	Steel	Provided	Alloy tool steel or bearing steel	50～60HRC	One Side Cutting Edge, Shouldered	+0.03/+0.01	16	6 ～ 14	10 ～ 20	3 ～ 13.99	2 ～ 5
-	1 Piece(s)	7 Day(s)	Steel	Provided	Alloy tool steel or bearing steel	50～60HRC	One Side Cutting Edge, Shouldered	+0.03/+0.01	20	10 ～ 18	10 ～ 20	3 ～ 17.99	2 ～ 5
-	1 Piece(s)	7 Day(s)	Steel	Provided	Alloy tool steel or bearing steel	50～60HRC	One Side Cutting Edge, Shouldered	+0.03/+0.01	25	15 ～ 22	10 ～ 20	3 ～ 21.99	2 ～ 5
-	1 Piece(s)	7 Day(s)	Stainless Steel	Provided	Equivalent to SUS440C	45～50HRC	One Side Cutting Edge, Shouldered	+0.03/+0.01	8	4 ～ 6	10 ～ 20	3 ～ 5.99	2 ～ 5
-	1 Piece(s)	7 Day(s)	Stainless Steel	Provided	Equivalent to SUS440C	45～50HRC	One Side Cutting Edge, Shouldered	+0.03/+0.01	10	4 ～ 8	10 ～ 20	3 ～ 7.99	2 ～ 5
-	1 Piece(s)	7 Day(s)	Stainless Steel	Provided	Equivalent to SUS440C	45～50HRC	One Side Cutting Edge, Shouldered	+0.03/+0.01	12	4 ～ 10	10 ～ 20	3 ～ 9.99	2 ～ 5
-	1 Piece(s)	7 Day(s)	Stainless Steel	Provided	Equivalent to SUS440C	45～50HRC	One Side Cutting Edge, Shouldered	+0.03/+0.01	16	6 ～ 14	10 ～ 20	3 ～ 13.99	2 ～ 5
-	1 Piece(s)	7 Day(s)	Stainless Steel	Provided	Equivalent to SUS440C	45～50HRC	One Side Cutting Edge, Shouldered	+0.03/+0.01	20	10 ～ 18	10 ～ 20	3 ～ 17.99	2 ～ 5
-	1 Piece(s)	7 Day(s)	Stainless Steel	Provided	Equivalent to SUS440C	45～50HRC	One Side Cutting Edge, Shouldered	+0.03/+0.01	25	14 ～ 22	10 ～ 20	3 ～ 21.99	2 ～ 5
-	1 Piece(s)	7 Day(s)	Stainless Steel	Not Provided	Austenitic stainless steel	-	Locating Pin, Rotation Stopper, Shouldered	+0.03/+0.01	8	4 ～ 6	10 ～ 20	3 ～ 5.99	2 ～ 5
-	1 Piece(s)	7 Day(s)	Stainless Steel	Not Provided	Austenitic stainless steel	-	Locating Pin, Rotation Stopper, Shouldered	+0.03/+0.01	10	4 ～ 8	10 ～ 20	3 ～ 7.99	2 ～ 5
-	1 Piece(s)	7 Day(s)	Stainless Steel	Not Provided	Austenitic stainless steel	-	Locating Pin, Rotation Stopper, Shouldered	+0.03/+0.01	12	4 ～ 10	10 ～ 20	3 ～ 9.99	2 ～ 5
-	1 Piece(s)	7 Day(s)	Stainless Steel	Not Provided	Austenitic stainless steel	-	Locating Pin, Rotation Stopper, Shouldered	+0.03/+0.01	16	6 ～ 14	10 ～ 20	3 ～ 13.99	2 ～ 5
-	1 Piece(s)	7 Day(s)	Stainless Steel	Not Provided	Austenitic stainless steel	-	Locating Pin, Rotation Stopper, Shouldered	+0.03/+0.01	20	10 ～ 18	10 ～ 20	3 ～ 17.99	2 ～ 5
-	1 Piece(s)	7 Day(s)	Stainless Steel	Not Provided	Austenitic stainless steel	-	Locating Pin, Rotation Stopper, Shouldered	+0.03/+0.01	25	14 ～ 22	10 ～ 20	3 ～ 21.99	2 ～ 5

Basic Information

Basic Shape	Shouldered	Hole Shape	Oval	Hole Type	Straight
With or w/o Tap	Not Tapped	O.D. Tolerance	Standard	Surface Treatment	Not Provided

Configure

60 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Material
- Steel
- Stainless Steel
Clear
Hardness
- Provided
- Not Provided
Clear
Material
- Equivalent to SUS440C
- Alloy tool steel or bearing steel
- Austenitic stainless steel
Clear
Hardness (Detail)
- 45～50HRC
- 50～60HRC
Clear
Type
- Locating Pin, Rotation Stopper, Shouldered
- One Side Cutting Edge, Shouldered
Clear
I.D. Tolerance
- +0.03/+0.01
- H8
Clear
Bushing Diameter D(φ)
- 8
- 10
- 12
- 16
- 20
- 25
Clear
I.D. P (D)(φ)
[4-22/0.01φ Unit(s)]
Clear
Total length L (D)(mm)
[10-20/1mm Unit(s)]
Clear
W(mm)
[3-22/0.01mm Unit(s)]
Clear
T(mm)
2

3

5
Clear
type
- E-KJBHSTC
- E-KJBHSTCC
- E-KJBHSTCD
- E-KJBSTC
- E-KJBSTCC
- E-KJBSTCD
- E-KJBSTCDC
- E-KJBSTCS
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

7 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Additional Products in this Category

Tech Support

: Technical Inquiry

How can we improve?

Bushings for Inspection Jig, Shouldered, Slotted, Dowel Pin/D Cut (Part Numbers)

Part Number

Basic Information

Configure

Specification/Dimensions

Material

Hardness

Material

Hardness (Detail)

Type

I.D. Tolerance

Bushing Diameter D(φ)

I.D. P (D)(φ)

Total length L (D)(mm)

W(mm)

T(mm)

type

CAD

Days to Ship

Specify Alterations

Additional Products in this Category

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm