[Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

[Clean & Pack]Torsion Springs

Click this image to zoom it.

Move the mouse over the image to zoom

Volume Discount

Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.

■Part Number for Clean & Pack Products

·Degreasing (Anti-rust single packing)	: Part Number SL-□□
·Precision cleaning (Degassing double packing)	: Part Number SH-□□
·Electrolytic polishing + precision cleaning (Degassing double packing)	: Part Number SHD-□□

Product Part Number	Cleaning Method	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Process
SL-□□	Degreasing	Anti-rust packing	Oil removal	General environment	Regular assembly process
					Post battery assembly process
SH-□□	Precision cleaning	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
					LCD-related post assembly process
					In-vehicle camera assembly process
SHD-□□	Electrolytic polishing + precision cleaning	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
					Liquid crystal deposition process
					Pre-OLED process

■Notes
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.

[Features]Arm angles of 90°/135°/180° are available for right and left winding.

(i)Caution

See here for related information such as technical information on cleaning effects and other cleaned product lineups.
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.
The spring constant and maximum angle used are indicated based on the value of the smaller wire diameter. Refer to the specification table for the correct specifications.

Part Number

Configured Part Number is shown.

Drawing/Specifications
3D Preview
Part Numbers

[Clean & Pack]Torsion Springs: Related Image

Arm Angle 90°
SL-UA90R (Right Winding)
SH-UA90R (Right Winding)
SHD-UA90R (Right Winding)
SL-UA90L (Left Winding)
SH-UA90L (Left Winding)
SHD-UA90L (Left Winding) Arm Angle 135°
SL-UA135R (Right Winding)
SH-UA135R (Right Winding)
SHD-UA135R (Right Winding)
SL-UA135L (Left Winding)
SH-UA135L (Left Winding)
SHD-UA135L (Left Winding) Arm angle 180°
SL-UA180R (Right Winding)
SH-UA180R (Right Winding)
SHD-UA180R (Right Winding)
SL-UA180L (Left Winding)
SH-UA180L (Left Winding)
SHD-UA180L (Left Winding) *The above drawing is Right Winding Type. [!]Torsion springs should be used in the winding direction.

Type						Body Material	Cleaning Method
Arm Angle 90°		Arm Angle 135°		Arm angle 180°		Body Material	Cleaning Method
Right Winding	Left Winding	Right Winding	Left Winding	Right Winding	Left Winding	[M] Material	Cleaning Method	Cleaning Environment	Packaging Type	Packing Environment
SL-UA90R	SL-UA90L	SL-UA135R	SL-UA135L	SL-UA180R	SL-UA180L	SUS304-WPB	Degreasing	General environment	Anti-rust packing	General environment
SH-UA90R	SH-UA90L	SH-UA135R	SH-UA135L	SH-UA180R	SH-UA180L		Precision cleaning	Class 1,000	Degassing double packing	Class 10
SHD-UA90R	SHD-UA90L	SHD-UA135R	SHD-UA135L	SHD-UA180R	SHD-UA180L		Electrolytic polishing + precision cleaning	Class 1,000	Degassing double packing	Class 10

[ ! ]Products are packed by order quantity. Ex. If the order is for 20 pieces, they are packed in one package (incl. 20 pieces).
[ ! ]See the details of degreasing, precision cleaning, and electrolytic polishing shown at the bottom of

the specification table.

Specification Table

Part Number	—	n	—	d
SL-UA90R4	—	3	—	0.5

Part Number		Number of Coils n	Wire Dia. d	Arm Length L·R	Spring Constant (Torque) N⋅mm/deg			Max. Angle Used deg (degrees)
Type	I.D. D	Number of Coils n	Wire Dia. d	Arm Length L·R	Arm Angle 90°	Arm Angle 135°	Arm Angle 180°	Arm Angle 90°	Arm Angle 135°	Arm Angle 180°
	2	2	0.2	20	0.0115	0.0119	0.0124	41	40	36
		2	0.3		0.0563	0.0586	0.0611	26	25	23
		3	0.2		0.0088	0.009	0.0093	59	58	56
		3	0.3		0.0428	0.0441	0.0455	38	36	35
		4	0.3		0.0345	0.0354	0.0363	52	50	47
		4	0.4		0.1054	0.108	0.1108	38	36	34
		5	0.3		0.0289	0.0295	0.0302	61	60	58
		5	0.4		0.0882	0.09	0.092	46	45	43
Arm Angle 90°	3	2	0.3	30	0.0387	0.0403	0.042	40	38	36
SL-UA90R (Right Winding)		2	0.4		0.1199	0.1248	0.1301	30	27	25
SH-UA90R (Right Winding)		3	0.3		0.0295	0.0304	0.0314	56	54	52
SHD-UA90R (Right Winding)		3	0.4		0.0912	0.094	0.097	42	40	39
SL-UA90L (Left Winding)		4	0.4		0.0736	0.0755	0.0774	55	53	51
SH-UA90L (Left Winding)		4	0.5		0.1756	0.1799	0.1845	44	42	41
SHD-UA90L (Left Winding)		5	0.4		0.0617	0.063	0.0643	71	68	66
Arm Angle 135°		5	0.5		0.1471	0.1501	0.1533	54	53	51
SL-UA135R (Right Winding)	4	2	0.4	40	0.0918	0.0955	0.0996	39	37	34
SH-UA135R (Right Winding)		2	0.5		0.2206	0.2296	0.2394	29	28	27
SHD-UA135R (Right Winding)		3	0.4		0.07	0.0722	0.0744	56	54	52
SL-UA135L (Left Winding)		3	0.5		0.168	0.1732	0.1787	42	41	40
SH-UA135L (Left Winding)		4	0.5		0.1357	0.139	0.1425	57	54	52
SHD-UA135L (Left Winding)		4	0.6		0.2763	0.2831	0.2903	48	47	45
Arm angle 180°		5	0.5		0.1138	0.1161	0.1185	69	67	65
SL-UA180R (Right Winding)		5	0.6		0.2315	0.2363	0.2413	60	59	58
SH-UA180R (Right Winding)	5	2	0.5	50	0.1793	0.1866	0.1944	39	36	34
SHD-UA180R (Right Winding)		2	0.6		0.3672	0.3821	0.3983	31	30	27
SL-UA180L (Left Winding)		3	0.5		0.1368	0.1409	0.1454	55	52	51
SH-UA180L (Left Winding)		3	0.6		0.2797	0.2883	0.2974	47	44	42
SHD-UA180L (Left Winding)		4	0.6		0.2259	0.2314	0.2373	60	58	56
( [ ! ]Spring constant is a reference value specific for arm length cut to be L/2 and R/2.)		4	0.8		0.6936	0.7108	0.7289	42	41	40
1 N = 0.101972 kgf		5	0.6		0.1894	0.1933	0.1974	75	73	71
1deg = 1° (Angle)		5	0.8		0.5811	0.5931	0.6056	54	53	52
	6	2	0.6	60	0.3099	0.3224	0.336	37	36	34
		2	0.8		0.959	0.9981	1.0406	26	25	24
		3	0.6		0.2363	0.2436	0.2512	56	52	50
		3	0.8		0.7299	0.7523	0.7762	38	36	35
		4	0.8		0.5891	0.6037	0.619	50	48	47
		4	1.0		1.4045	1.4394	1.476	42	40	39
		5	0.8		0.4939	0.5041	0.5147	63	61	60
		5	1.0		1.1765	1.2008	1.2262	51	50	49

Alterations

Part Number	—	n	—	d	—	(LC·RC·LBC·RBC)
SL-UA90R4	—	3	—	0.5	—	LC12−RC15−LBC90−LZ5

Alterations	Arm Cut		Bend Left Arm	Bend Right Arm
Code	LC	RC	LBC	RBC
Spec.			(Right Winding)	(Right Winding)
			(Left Winding)	(Left Winding)
	Cuts arm down to the length of LC or RC. [ ! ]LC ≥ 3, RC ≥ 3 1 mm Increments Ordering Code LC12		● LBC: Bending direction configurable (See the figure above) [ ! ]Select from LBC0, LBC90, LBC180 and LBC270 ● LZ:: Bending position configurable (1 mm Increments) [ ! ]LZ ≥ 3 L－LZ ≥ 3 Ordering Code LBC90–LZ10	● RBC: Bending direction configurable (See the figure above) [ ! ]Select from RBC0, RBC90, RBC180 and RBC270 ● RZ:: Bending position configurable (1 mm Increments) [ ! ]RZ ≥ 3 R－RZ ≥ 3 Ordering Code RBC90–RZ10

Cleaning Process
·Degreasing (Part Number: SL-□□)

Working Environment: General environment
Alkaline warm pure water		Ultrasonic pure water cleaning after cleaning with pure water　 *3 times		Dry		Anti-rust single packing

·Precision cleaning (Part Number: SH-□□)

				Working Environment: Class 1,000				Working Environment: Class 10
Hydrocarbon cleaning Ro water cleaning		After high-pressure water jet cleaning (Ro water) Wash with pure water (10 MΩ·cm)		Use pure water (13 MΩ·cm)		Use nitrogen blow		Conducted on a clean bench in a class 10 clean environment

·Electrolytic polishing + precision cleaning (Part Number: SHD-□□)

						Working Environment: Class 1,000				Working Environment: Class 10
Hydrocarbon cleaning Ro water cleaning		Electrolytic polishing with an electrolytic polishing layer according to the material		After high-pressure water jet cleaning (Ro water) Wash with pure water (10 MΩ·cm)		Use warm pure water (13 MΩ·cm)		Use nitrogen blow		Conducted on a clean bench in a class 10 clean environment

Packaging Example

For degreasing:
(Part Number: SL-□□)

For precision cleaning or electrolytic polishing + precision cleaning:
(Part Number: SH-□□/SHD-□□)

[ ! ] Both the first and second layer packaging are degassed.

Cleaning Effectiveness / Recommended Environment for Use

Cleaning Method	Product Part Number	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Use Case and Process
Degreasing	SL-□□	Anti-rust packing	Oil removal	General environment	Regular assembly process
Degreasing	SL-□□	Anti-rust packing	Oil removal	General environment	Post battery assembly process
Precision cleaning	SH-□□	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
					LCD-related post assembly process
					In-vehicle camera assembly process
Electrolytic polishing + precision cleaning	SHD-□□	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
					Liquid crystal deposition process
					Pre-OLED process

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 45; 60

Part Number
SL-UA90L5-4-0.6
SL-UA90L5-4-0.6

Part Number	Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	Arm Angle	Inner Dia. D	Max. Angle Used (deg)	Wire Dia. d (Ø)	Number of Winding	Spring Constant (N･mm/deg)	Cleaning Method	Alterations
	MYR 53.85	1 Piece(s)	Available	6 Day(s) or more	Arm Angle 90° (Left Winding)	5	60	0.6	4	0.2259	Degreasing	None
	-	1 Piece(s)		6 Day(s) or more	Arm Angle 90° (Left Winding)	5	60	0.6	4	0.2259	Degreasing	Provided

Basic Information

Environmentally friendly	RoHS Compliant (10 Substances)	Characteristics/Applications	Clean Washed	Material	SUS304-WPB

Configure

2 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Alterations
- None
- Provided
Clear
type
- SH-UA135L
- SH-UA135R
- SH-UA180L
- SH-UA180R
- SH-UA90L
- SH-UA90R
- SHD-UA135L
- SHD-UA135R
- SHD-UA180L
- SHD-UA180R
- SHD-UA90L
- SHD-UA90R
- SL-UA135L
- SL-UA135R
- SL-UA180L
- SL-UA180R
- SL-UA90L
- SL-UA90R
Clear
Arm Angle
- Arm Angle 90° (Right Winding)
- Arm Angle 135° (Right Winding)
- Arm Angle 180° (Right Winding)
- Arm Angle 90° (Left Winding)
- Arm Angle 135° (Left Winding)
- Arm Angle 180° (Left Winding)
Clear
Inner Dia. D
2

3

4

5

6
Clear
Max. Angle Used(deg)
23

24

25

26

27

28

29

30

31

34

35

36

37

38

39

40

41

42

43

44

45

46

47

48

49

50

51

52

53

54

55

56

57

58

59

60

61

63

65

66

67

68

69

71

73

75

75(0.6) 54(0.8)
Clear
Wire Dia. d(Ø)
0.2

0.3

0.4

0.5

0.6

0.8

1
Clear
Number of Winding
- 2
- 3
- 4
- 5
Clear
Spring Constant(N･mm/deg)
0.0088

0.0090

0.0093

0.0115

0.0119

0.0124

0.0289

0.0295

0.0302

0.0304

0.0314

0.0345

0.0354

0.0363

0.0387

0.0403

0.042

0.0428

0.0441

0.0455

0.0563

0.0586

0.0611

0.0617

0.0630

0.0643

0.07

0.0722

0.0736

0.0744

0.0755

0.0774

0.0882

0.09

0.0912

0.0918

0.0920

0.094

0.0955

0.0970

0.0996

0.1054

0.1080

0.1108

0.1138

0.1161

0.1185

0.1199

0.1248

0.1301

0.1357

0.1368

0.139

0.1409

0.1425

0.1454

0.1471

0.1501

0.1533

0.1680

0.1732

0.1756

0.1787

0.1793

0.1799

0.1845

0.1866

0.1894

0.1933

0.1944

0.1974

0.2206

0.2259

0.2296

0.2314

0.2315

0.2363

0.2373

0.2394

0.2413

0.2436

0.2512

0.2763

0.2797

0.2831

0.2883

0.2903

0.2974

0.3099

0.3224

0.3360

0.3672

0.3821

0.3983

0.4939

0.5041

0.5147

0.5811

0.5891

0.5931

0.6037

0.6056

0.6190

0.6936

0.7108

0.7289

0.7299

0.7523

0.7762

0.9590

0.9981

1.0406

1.1765

1.2008

1.2262

1.4045

1.4394

1.4760
Clear
Cleaning Method
- Degreasing
- Precision Cleaning
- Electrolytic Polishing + Precision Cleaning
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

6 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Additional Products in this Category

Tech Support

: Technical Inquiry

How can we improve?

[Clean & Pack]Torsion Springs

(i)Caution

Specification Table

Alterations

Part Number

Basic Information

Configure

Specification/Dimensions

Alterations

type

Arm Angle

Inner Dia. D

Max. Angle Used(deg)

Wire Dia. d(Ø)

Number of Winding

Spring Constant(N･mm/deg)

Cleaning Method

CAD

Days to Ship

Specify Alterations

Additional Products in this Category

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm