[Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Chains With Attachments, Japanese Standard Type/Joint Link (Part Numbers)

Volume Discount

MiSUMi Economy

- Chains With Attachments, Japanese Standard Type/Joint Link from MISUMI.
- This chain type is economy series of standard chains.
- 2 chain types are available, C-CHEL (single side type), C-CHET (double side type).
- Chain nominal No. are 40, 50 or 60.
- Max. Allowable Tension of chain are 2.75 kN (No. 40), 4.41 kN (No. 50) and 6.28 kN (No. 60).
- Chains are made of steel.
- The conveyor belt chain with accessories can only be used for transmission, with an additional height difference of ±0.25mm. Do not use for precise positioning and heavy load use.

RoHS

Part Number

Configured Part Number is shown.

Drawing/Specifications
3D Preview
Part Numbers

Economy Chains With Attachments

High Tension Reliable Customizable

- Experience robust performance with our Economy Series chains, featuring maximum allowable tensions for demanding applications.

- Choose from single side and double side types to perfectly match your transmission and conveyor needs.

- Built from high-strength steel for long-lasting reliability.

- Configurations available for nominal sizes to suit specific requirements.

- Ideal for conveyor belts and general power transmission, accommodating height differences.

MISUMI Standard

Cheaper Price

Product Variety

3D CAD
3D CAD Support

Product Overview of Chains

■The Chains is a flexible component composed of inner Chains plates, sleeves, rollers, pins, outer Chains plates and other matched combination parts. All Chains used on machinery, mechanisms and machines are referred to as industrial Chains. The roller part of the Chains meshes with the tooth part of the sprocket and transmits power as tension.

■Only sprockets and Chains with the same specifications can be used in combination. Matching of different types may cause the Chains sprocket mechanism to fail to function properly!

■ The conveyor belt chain with accessories can only be used for transmission, with an additional height difference of ±0.25mm. Do not use for precise positioning and heavy load use.

■ Product Composition of Chains
Idler Dimensional Drawing

Dimensional Drawing of Chains

Material Steel

■ The conveyor belt Chains with accessories can only be used for transmission, with an additional height difference of ±0.25mm. Do not use for precise positioning and heavy load use.

Specifications Overview of Chains

■ Sprocket, Chains selection This series is ISO Standard 08A/10A/12A/(ANSI 40/50/60) roller chain, and can be used in combination with our 40B/50B/60B series sprocket.
■Do not use it with 08B/10B/12B sprocket, which may cause the Chains sprocket mechanism to fail to function properly!
■ The conveyor belt Chains with accessories can only be used for transmission, with an additional height difference of ±0.25mm. Do not use for precise positioning and heavy load use.

Part Number of Chains		＊Number of links	Link spacing	Pin		Slab	Accessories					Allowable maximum tension kN (kgf)
Type of Chains	Nominal model	＊Number of links	Link spacing	L₁	L₂	t	C	X	Y	N	d	Allowable maximum tension kN (kgf)
C-CHEL (single side type) C-CHET (double side type)	40	120	12.7	8.3	9.6	1.5	7.9	12.7	17.6	9.5	3.4	2.75 (280)
	50	96	15.875	10.25	11.85	2	10.3	15.9	23.1	12.7	5.5	4.41 (450)
	60	80	19.05	12.65	14.35	2.4	11.9	19.05	27.8	15.9	5.5	6.28 (640)

■ Number of links of 1 Chains

Part Number		Number of links of 1 chain
Type of Chains	No.	Number of links of 1 chain
C-CHEL (single side type) C-CHET (double side type)	40	120 (circumference length 1,524mm)
	50	96 (circumference length 1,524mm)
	60	80 (circumference length 1520mm)

Product Feature of Chains

■Sprocket Chains drive has the following features compared with gear drive and belt drive:
1. Multi-tooth load bearing, safe and reliable;
2. Flexible transmission, absorbing shock and vibration;
3. Large center distance range, low manufacturing and mounting accuracy requirements;
4. Compared with belt drive, the transmission ratio is accurate and the transmission efficiency is higher, suitable for high temperature.

■Two main purposes of the Chains:
1. Connect the motor for transmission 2. Place the workpiece directly or indirectly on the Chains for transfer

Example Use of Chains

Used for driving power of Chains
A mechanism that can convert motor power into roller rotation by combining multiple sprockets and Chains

Used for transporting workpieces of Chains
A chain conveyor frame with high versatility using flat profiles and Chains guides

Used for transporting workpieces of Chains
A mechanism used to mount accessories on the Chains, and extract and transport workpieces

Precautions of Chains

This series is ISO Standard 08A/10A/12A/(ANSI 40/50/60) roller Chains, and can be used in combination with our 40B/50B/60B series sprocket. Do not use it with 08B/10B/12B sprocket, which may cause the Chains sprocket mechanism to fail to function properly!

If you need to cut the Chains by yourself, please confirm whether the chain link to be cut is an inner link or an outer link. If it is a single section after being cut off, it may need to be used with an offset link head.

Usage Method of Chains

How to mount the roller Chains

(A) Axis configuration of Chains
■Horizontal
Even when the two axes are arranged horizontally, the rotation direction of the axis must be considered.
The examples (2) and (3) in the figure show that when the Chains is stretched, the disengagement between the sprocket teeth and the chain is not smooth and may bite.
In particular, the upper and lower chains in (3) will contact each other, so an idler is required.

■Vertical
If the Chains is stretched, slack as shown in (5) will occur, and
when a small sprocket is used on the lower side, the chain may fall off. Therefore, please use it at an angle of 60 or less as shown in (4).
When it is necessary to use it vertically due to the mechanism or space, it is recommended to put the large sprocket on the lower side, and
use the idler on the outside or inside as shown in (6).

(B) Deflection
Deflection is generally about 4% of the shaft spacing, and about 2% in the following cases.
a. Vertical transmission or close to vertical transmission
b. Shaft spacing is more than 1m
c. When frequent heavy load starting and stopping are required
d. When reverse rotation is required

(C)When the load changes
If a tension adjuster is mounted on the tension side or slack side of the Chains to provide initial tension in advance, it will eliminate vibration and reduce noise during operation.

Related Products of Chains


Sprocket 40B	Sprocket 50B	Sprocket 60B

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 60; 90

Part Number
C-CHEL40-120
C-CHEL50-96
C-CHEL60-80
C-CHET40-120
C-CHET50-96
C-CHET60-80
E-JNT-L40
E-JNT-L50
E-JNT-L60
E-JNT-T40
E-JNT-T50
E-JNT-T60

Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	Type	Nominal Number	Pitch	Max. Allowable Tension (kN)	Type	Number of Links (pc(s).)
MYR 61.85	1 Piece(s)	Available	1 Day(s)	Standard Chains	40	12.7	~99	One-side section	120
MYR 84.22	1 Piece(s)	Available	1 Day(s)	Standard Chains	50	15.875	~99	One-side section	96
MYR 81.67	1 Piece(s)	Available	1 Day(s)	Standard Chains	60	19.05	~99	One-side section	80
MYR 80.97	1 Piece(s)	Available	1 Day(s)	Standard Chains	40	12.7	~99	Two-sides joint	120
MYR 84.40	1 Piece(s)	Available	1 Day(s)	Standard Chains	50	15.875	~99	Two-sides joint	96
MYR 150.33	1 Piece(s)	Available	1 Day(s)	Standard Chains	60	19.05	~99	Two-sides joint	80
MYR 75.66	10 Piece(s)		15 Day(s)	Joint Links, Offset Links	40	12.7	-	-	-
MYR 8.86	10 Piece(s)	Available	15 Day(s)	Joint Links, Offset Links	50	15.875	-	-	-
MYR 8.24	10 Piece(s)	Available	15 Day(s)	Joint Links, Offset Links	60	19.05	-	-	-
MYR 7.52	10 Piece(s)	Available	15 Day(s)	Joint Links, Offset Links	40	12.7	-	-	-
MYR 9.20	10 Piece(s)	Available	15 Day(s)	Joint Links, Offset Links	50	15.875	-	-	-
MYR 10.46	10 Piece(s)	Available	15 Day(s)	Joint Links, Offset Links	60	19.05	-	-	-

Basic Information

Number of Strands	1	Material	Steel	Surface Treatment	Not Provided

Configure

12 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Type
- Standard Chains
- Joint Links, Offset Links
Clear
Nominal Number
40

50

60
Clear
Pitch
12.7

15.875

19.05
Clear
Max. Allowable Tension(kN)
- ~99
Clear
Type
- One-side section
- Two-sides joint
Clear
Number of Links(pc(s).)
80

96

120
Clear
type
- C-CHEL40
- C-CHEL50
- C-CHEL60
- C-CHET40
- C-CHET50
- C-CHET60
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

1 Day(s) or Less

15 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Frequently asked question (FAQ)

Question: I bought MISUMI chains, but why can't I use them on my original sprocket?: Answer: Please confirm the specifications of the original sprocket and chain. Specification series number may not match. In addition, there are two specifications: A series and B series in China. The two specifications of sprocket chain are not universal.
Question: Does the chain need routine maintenance after installation and use?: Answer: The chain needs regular maintenance after installation and use. These include daily lubricant application, confirmation of chain slack. The quality of lubrication will affect the life of the chain. Especially in recent years, high-speed use has been increasing, so it is necessary to take efficient lubrication methods.
Question: Does the chain purchased come with joints, and if any, how many joints?: Answer: In principle, one chain comes with one joint. If the customer needs multiple joints to use, you can buy it yourself, we have separate joints to choose from. Please refer to the chain type when purchasing joints.
Question: How to use the carrier chain?: Answer: The carrier chain can only be used for transmission, not for scenarios with large load and high positioning accuracy, please be careful!
Question: Can the chain be cut off when it is extended?: Answer: It can be cut off. Our company has simple chain cutter available for selection.

Check other FAQ (2 items) Hide

Additional Products in this Category

Tech Support

: Technical Inquiry

How can we improve?

Chains With Attachments, Japanese Standard Type/Joint Link (Part Numbers)

Economy Chains With Attachments

Product Overview of Chains

Dimensional Drawing of Chains

Specifications Overview of Chains

Product Feature of Chains

Example Use of Chains

Precautions of Chains

Usage Method of Chains

Related Products of Chains

Part Number

Basic Information

Configure

Specification/Dimensions

Type

Nominal Number

Pitch

Max. Allowable Tension(kN)

Type

Number of Links(pc(s).)

type

CAD

Days to Ship

Specify Alterations

Frequently asked question (FAQ)

Additional Products in this Category

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm