[Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Sprockets Nominal No.20B (Part Numbers)

Volume Discount

MiSUMi Economy

Economy series B series sprockets should not be matched with A series chains. Please note that some yellow anti-rust oil may be adhered on the surface of the delivered sprocket, which does not affect the use and can be cleaned by yourself.

RoHS

Part Number

Configured Part Number is shown.

Drawing/Specifications
3D Preview
Part Numbers

Product Overview

■ Sprocket is a solid or spoked gear that engages with a roller chain to transfer motion or power.
Application of sprocket: It is widely used in mechanical transmission in chemical industry, textile machinery, food processing, instrumentation, and petroleum industries.

■Only sprockets and chains with the same specifications can be used in combination.
This series is ANSI 20B sprocket, and can be used in combination with our 20B series chain.
■ Do not use it with ISO/ANSI 20 A series chain, which may cause the chain sprocket mechanism to fail to function properly!
The surface of the delivered sprocket may have yellow anti-rust oil attached. This does not affect usage and can be cleaned off if desired. Please take note.
■ Due to process reasons, it is impossible to guarantee the coincidence of the tooth tops of multiple sprockets. If you need to use the tooth tops in an overlapping manner, please contact us.

Dimensional Drawing

External Dimensions (Unit: mm)
Sprockets processed by shaft hole and keyway. *This product is B series European Standard sprocket, and can not be used in combination with American Standard 20 A series sprocket.
■ A single package label may not match the ordered model. It is a factory-managed model. Please note that the outer package label shall prevail!
■ The engraving of sprocket body may be different from the ordered model, please check the engraving number.

20B Dimensional Drawing

Material Specifications

Material	Surface Treatment	Accessories
Equivalent to S45C (Induction Hardened Teeth Tip)	－	Fixing Screw (Only Shaft Hole Specifications N)

*This series is 20B European Standard sprocket, and can not be used in combination with American Standard 20 A series sprocket.

Specification Overview

Specification Table

Part Number				Hole Specifications	Shaft Bore Diameter (D)							Dp	D_O	H	L
Type	Nominal model	Hub type	Number of Teeth (T)	Hole Specifications	S Specification (H8)	N Specifications (H7)						Dp	D_O	H	L
C-SPB	20	B	10	S N	20	25	30					102.74	117	70	40
			11			25	30					112.68	127	77	45
			12				30	35				122.68	137	88
			13				30	35	40			132.65	147.5	98
			14					35	40	45	50	142.68	157.6	108
			15						40	45	50	152.72	167.7	118
			16						40	45	50	162.75	177.7	120	50
			17		25					45	50	172.78	187.8
			18							45	50	182.85	197.8
			19							45	50	192.91	207.9
			20							45	50	202.98	217.9

■ A single package label may not match the ordered model. It is a factory-managed model. Please note that the outer package label shall prevail!

■ Shaft Hole Machining Size Table

Shaft Hole Diameter D	Keyway b₂ × t₂	Fixing Screw M
25 to 30	8 × 3.3	8
32 to 38	10 × 3.3	8
40·42	12 × 3.3	8
45·50	14 × 3.8	10

Product Features

■Sprocket chain drive has the following features compared with gear drive and belt drive:
1. Multi-tooth load bearing, safe and reliable;
2. Flexible transmission, absorbing shock and vibration;
3. Large center distance range, low manufacturing and installation accuracy requirements;
4. Compared with belt drive, the transmission ratio is accurate and the transmission efficiency is higher, suitable for high temperature, dusty and humid environments.

■ Sprocket, chain selection
Misumi’s sprocket and chain product selection supports the principle of “Nominal Numbering”
Product Features

Usage Method

How to mount the roller chain
(A) Shaft arrangement
■ Horizontal
Even when configured as two horizontal axes, the rotation direction of the axes must still be considered.
The examples (2) and (3) in the diagram show that when the chain is stretched, the disengagement between the sprocket teeth and the chain is not smooth and may bite.
In particular, the upper and lower chains in (3) will contact each other, so an idler is required.

■Vertical
If the chain is stretched, slack as shown in (5) will occur, and
when a small sprocket is used on the lower side, the chain may fall off. Therefore, please use it at an angle of 60 or less as shown in (4).
When it is necessary to use it vertically due to the mechanism or space, it is recommended to put the large sprocket on the lower side, and use the idler on the outside or inside as shown in (6).

(B) Deflection
Deflection is generally about 4% of the shaft spacing, and about 2% in the following cases.
a. Vertical transmission or close to vertical transmission
b. Shaft spacing is more than 1m
c. When frequent heavy load starting and stopping are required
d. When reverse rotation is required

(C)When the load changes
If a tension adjuster is mounted on the tension side or slack side of the chain to provide initial tension in advance, it will eliminate vibration and reduce noise during operation.

Precautions

■ Sprocket maintenance
1. Sprocket tightness should be suitable. If it is too tight, it will increase power consumption, and bearing is easy to wear; if it is too loose, the sprocket is easy to beat and fall off the chain.
The degree of tightness of the sprocket is: if lifted up or pressed down from the middle of the sprocket, the center distance between the two sprocket is about 2%-3%.

2. The sprocket shall be installed on shaft without swing and skew.
The end faces of the two sprockets in the same transmission assembly should be in the same plane. When the center distance of the sprocket is less than 0.5 meters, the deviation can be 1 mm;
When the center distance of the sprocket is more than 0.5 meters, the deviation can be 2 mm. But there shall be no friction on sprocket tooth side. Integral offset.
If the offset is too large, chain is prone to fall off and wear is likely to accelerate. When replacing the sprocket, be sure to check and adjust the offset

3. After the sprocket is severely worn, the new sprocket and the new chain should be replaced at the same time to ensure good meshing.
You cannot replace new sprockets separately. Otherwise, it will cause bad engagement and accelerate the wear of new sprockets.
If the tooth surface of the sprocket is worn to a certain degree, it should be turned over in time (the sprocket used with adjustable surface) to extend the life time.

4. If the new sprocket is too long or elongated after use, and difficult to adjust, you can remove the link, but the number of the links must be even.
The link should pass through the back of the sprocket with the lock piece being inserted outside, and the opening of the lock piece should be in the opposite direction of the turning.

5. Lubricating oil should be timely filled when sprockets are working. Lubricating oil must enter the matching clearance between the roller and the inner sleeve to improve working conditions and reduce wear.

6. The old sprocket cannot be mixed with part of the new sprocket, and should be replaced as a complete set, otherwise it is easy to produce impact in the transmission. Separate replacement of sprockets will increase wear.

Example of Use

Used for driving power A mechanism that can convert motor power into roller rotation by combining multiple sprockets and chains

Used for transporting workpieces A chain conveyor frame with high versatility using flat profiles and chain guides

Used for transporting workpieces A mechanism used to mount accessories on the chain, and extract and transport workpieces

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 60; 90

Part Number
C-SPB20B10-N-25
C-SPB20B10-N-30
C-SPB20B11-N-25
C-SPB20B11-N-30
C-SPB20B12-N-30
C-SPB20B12-N-35
C-SPB20B12-S-20
C-SPB20B13-N-30
C-SPB20B13-N-35
C-SPB20B13-N-40
C-SPB20B14-N-45
C-SPB20B16-N-40
C-SPB20B16-N-45
C-SPB20B16-N-50
C-SPB20B18-N-45
C-SPB20B18-N-50
C-SPB20B19-N-45
C-SPB20B19-N-50
C-SPB20B20-N-45
C-SPB20B20-N-50

Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	Number of Teeth (T)	Shaft Bore Dia. d (mm)	Type	Shaft Type	Bore Specification
MYR 123.56	1 Piece(s)	Available	15 Day(s)	10	25	Shaft Bore Machined Type	Shaft Bore Machining Configurable	N (New JIS Key + Threaded Hole)
MYR 123.56	1 Piece(s)	Available	15 Day(s)	10	30	Shaft Bore Machined Type	Shaft Bore Machining Configurable	N (New JIS Key + Threaded Hole)
MYR 148.16	1 Piece(s)	Available	15 Day(s)	11	25	Shaft Bore Machined Type	Shaft Bore Machining Configurable	N (New JIS Key + Threaded Hole)
MYR 148.16	1 Piece(s)	Available	15 Day(s)	11	30	Shaft Bore Machined Type	Shaft Bore Machining Configurable	N (New JIS Key + Threaded Hole)
MYR 177.66	1 Piece(s)	Available	15 Day(s)	12	30	Shaft Bore Machined Type	Shaft Bore Machining Configurable	N (New JIS Key + Threaded Hole)
MYR 177.66	1 Piece(s)	Available	15 Day(s)	12	35	Shaft Bore Machined Type	Shaft Bore Machining Configurable	N (New JIS Key + Threaded Hole)
MYR 103.52	2 Piece(s)	Available	15 Day(s)	12	20	Pilot Bore Type	Standard Pilot Bore	S (Through Hole)
MYR 204.60	1 Piece(s)	Available	15 Day(s)	13	30	Shaft Bore Machined Type	Shaft Bore Machining Configurable	N (New JIS Key + Threaded Hole)
MYR 204.60	1 Piece(s)	Available	15 Day(s)	13	35	Shaft Bore Machined Type	Shaft Bore Machining Configurable	N (New JIS Key + Threaded Hole)
MYR 204.60	1 Piece(s)	Available	15 Day(s)	13	40	Shaft Bore Machined Type	Shaft Bore Machining Configurable	N (New JIS Key + Threaded Hole)
MYR 216.85	2 Piece(s)		16 Day(s)	14	45	Shaft Bore Machined Type	Shaft Bore Machining Configurable	N (New JIS Key + Threaded Hole)
MYR 314.30	1 Piece(s)	Available	15 Day(s)	16	40	Shaft Bore Machined Type	Shaft Bore Machining Configurable	N (New JIS Key + Threaded Hole)
MYR 314.30	1 Piece(s)	Available	15 Day(s)	16	45	Shaft Bore Machined Type	Shaft Bore Machining Configurable	N (New JIS Key + Threaded Hole)
MYR 314.30	1 Piece(s)	Available	15 Day(s)	16	50	Shaft Bore Machined Type	Shaft Bore Machining Configurable	N (New JIS Key + Threaded Hole)
MYR 355.78	1 Piece(s)	Available	15 Day(s)	18	45	Shaft Bore Machined Type	Shaft Bore Machining Configurable	N (New JIS Key + Threaded Hole)
MYR 355.78	1 Piece(s)	Available	15 Day(s)	18	50	Shaft Bore Machined Type	Shaft Bore Machining Configurable	N (New JIS Key + Threaded Hole)
MYR 386.30	1 Piece(s)	Available	15 Day(s)	19	45	Shaft Bore Machined Type	Shaft Bore Machining Configurable	N (New JIS Key + Threaded Hole)
MYR 386.30	1 Piece(s)	Available	15 Day(s)	19	50	Shaft Bore Machined Type	Shaft Bore Machining Configurable	N (New JIS Key + Threaded Hole)
MYR 409.68	1 Piece(s)	Available	15 Day(s)	20	45	Shaft Bore Machined Type	Shaft Bore Machining Configurable	N (New JIS Key + Threaded Hole)
MYR 409.68	1 Piece(s)	Available	15 Day(s)	20	50	Shaft Bore Machined Type	Shaft Bore Machining Configurable	N (New JIS Key + Threaded Hole)

Basic Information

Sprocket Shape	Shape B	Nominal Number	20	Number of Strands	1
Material	S45C	Surface Treatment	Not Provided

Configure

20 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Number of Teeth(T)
10

11

12

13

14

16

18

19

20
Clear
Shaft Bore Dia. d(mm)
20

25

30

35

40

45

50
Clear
Type
- Pilot Bore Type
- Shaft Bore Machined Type
Clear
Shaft Type
- Standard Pilot Bore
- Shaft Bore Machining Configurable
Clear
Bore Specification
- N (New JIS Key + Threaded Hole)
- S (Through Hole)
Clear
type
- C-SPB20B
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

15 Day(s) or Less

16 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Frequently asked question (FAQ)

Question: I bought MISUMI chains, but why can't I use them on my original sprocket?: Answer: Please confirm the specifications of the original sprocket and chain. Specification series number may not match. In addition, there are two specifications: A series and B series in China. The two specifications of sprocket chain are not universal.
Question: Does the sprocket need routine maintenance after installation and use?: Answer: The chain needs regular maintenance after installation and use. These include daily lubricant application, confirmation of chain slack. After the sprocket is severely worn, the new sprocket and the new chain should be replaced at the same time to ensure good meshing.
Question: I need to use two overlapped sprockets, I want the tooth top direction to be consistent, is it possible?: Answer: Due to process reasons, it is impossible to guarantee the overlapping of the tooth tops of several sprockets. If the tooth tops are required to be overlapped, please contact our company or indicate on the order (the tooth tops need to be overlapped)
Question: The engraving on the sprocket does not match the packaged model, is it shipped wrongly?: Answer: The product model is subject to the label on the shipping bag and the actual size. The engraving is only the factory management number of the sprocket product during processing, and is not directly associated with the product model.

Check other FAQ (1 items) Hide

Additional Products in this Category

Tech Support

: Technical Inquiry

How can we improve?

Sprockets Nominal No.20B (Part Numbers)

Product Overview

Dimensional Drawing

Material Specifications

Specification Overview

Product Features

Usage Method

Precautions

Example of Use

Part Number

Basic Information

Configure

Specification/Dimensions

Number of Teeth(T)

Shaft Bore Dia. d(mm)

Type

Shaft Type

Bore Specification

type

CAD

Days to Ship

Specify Alterations

Frequently asked question (FAQ)

Additional Products in this Category

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm