(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Acrylic Plate -Cast Type -Custom Size (Part Numbers)
[Standard large quantity available] For standard sizes and hole-machined types from 21 to 100 pieces, a 15% discount is available without the need for an estimate. [Standard large quantity available] For side milling cutters of 11 to 20 pieces, a 5% discount is available without the need for an estimate.
Part Number
Configured Part Number is shown.
Drawing
■Number of Holes Combination Type (With Corner Holes Pre-Drilled)
■Number of Holes Combination Table ■Part Number Ordering Codes [!] The formula for calculating the total number of holes is 2a + 2b - 4. When a and b are 1, then a × b.
| Machining Method | Surface texture | |
| 4 Sides | Circular sawing |  |
| Upper-Lower Surface | Material |  |
[!] The pitch between holes is equally divided. The formula for calculating the pitch is ap = (A - 2C)/(a - 1), bp = (B - 2D)/(b - 1).
[!] When the number of holes per side is 1, the (C) and (D) dimensions are not applied to the holes from the end face. (Asymmetrical machining)
[ ! ] Only burrs generated on the cut part are removed.
To prevent cuts on the corners, please specify additional machining for 4 corners of the same size.
| Hole Machining Details | ||||||||||||||||||||||||||||||||||||||||||||||||
| N (Through Hole) | P (Countersink) | M (Threaded Insert) | Hole Machining Conditions (N・P·M) | |||||||||||||||||||||||||||||||||||||||||||||
 |  |  Ordering Code (Example) M4-L6 [ ! ]L ≤ T－1 |  | |||||||||||||||||||||||||||||||||||||||||||||
| ■Table 1
|
| ||||||||||||||||||||||||||||||||||||||||||||||
| Q (Keyhole) | Hole Machining Condition Q (Keyhole) | |||||||||||||||||||||||||||||||||||||||||||||||
 |
| [ ! ] Keyhole Machining Condition c ≥ 5 | ||||||||||||||||||||||||||||||||||||||||||||||
[ ! ] Use with | "Keyhole Position" (1): The center of bp dimension is consistent with the center of D dimension. (2): When there are 3 or more holes on one side, the pitch is equally divided around d1. (3): The center of diameter d1 for the keyhole is consistent with the value for the center of C(D). | |||||||||||||||||||||||||||||||||||||||||||||||
■Number of Holes Combination Type (No Corner Drilling)
■Number of Holes Combination Table ■Part Number Ordering Codes [ ! ] The formula for calculating the total number of holes is 2a + 2b.
| Machining Method | Surface texture | |
| 4 Sides | Circular sawing | |
| Upper-Lower Surface | Material | |
[!] The pitch between holes is equally divided. The formula for calculating the pitch is ap = (A - 2C)/(a - 1), bp = (B - 2S)/(b - 1).
[ ! ] Only burrs generated on the cut part are removed.
To prevent cuts on the corners, please specify additional machining for 4 corners of the same size.
| Hole Machining Details | ||||||||||||||||||||||||||||||||||||||||||||||||
| N (Through Hole) | P (Countersink) | M (Threaded Insert) | Hole Machining Conditions (N・P·M) | |||||||||||||||||||||||||||||||||||||||||||||
| | Ordering Code (Example) M4-L6 [ ! ]L ≤ T－1 | | |||||||||||||||||||||||||||||||||||||||||||||
| ■Table 1
|
| ||||||||||||||||||||||||||||||||||||||||||||||
| Q (Keyhole) | Hole Machining Condition Q (Keyhole) | |||||||||||||||||||||||||||||||||||||||||||||||
|
| [ ! ] Keyhole Machining Condition c ≥ 5 | ||||||||||||||||||||||||||||||||||||||||||||||
[ ! ]Use with | "Keyhole Position" (1): The center of bp dimension is consistent with the center of D and R dimension. (2): When there are 3 or more holes on one side, the pitch is equally divided around d1 | |||||||||||||||||||||||||||||||||||||||||||||||
■ Hole Machined Type
| Finish | 4 Sides | Upper-Lower Surface | ||
| Machining Method | Surface texture | Machining Method | Surface texture | |
| Circular sawing | Circular sawing | | Material | |
2H2HL4H6H8H■ Standard Type
[ ! ]A ≥ B
| Finish | 4 Sides | Upper-Lower Surface | ||
| Machining Method | Surface texture | Machining Method | Surface texture | |
| Circular sawing | Circular sawing | | Material | |
| 4-side Milling (4F) | Milling |  | Material | |
Product Specifications
■Number of Holes Combination Type (With Corner Holes Pre-Drilled)
| Type | [M]Grade | Color | Light Transmittance | Operating Ambient Temperature |
| ACA | Standard | Transparent | 93% | －30 to 80°C |
| ACBA | Standard | Brown Smoke | 25% | |
| ACDA | Standard | Orange | 43% | |
| ACTA | Antistatic | Transparent | 79% | |
| ACBTA | Antistatic | Brown Smoke | 32% |
■Number of Holes Combination Type (No Corner Drilling)
| Type | [M]Grade | Color | Light Transmittance | Operating Ambient Temperature |
| ACA | Standard | Transparent | 93% | －30 to 80°C |
| ACBA | Standard | Brown Smoke | 25% | |
| ACDA | Standard | Orange | 43% | |
| ACTA | Antistatic | Transparent | 79% | |
| ACBTA | Antistatic | Brown Smoke | 32% |
■ Hole Machined Type
| Type | [M]Grade | Color | Light Transmittance | Operating Ambient Temperature |
| ACA | Standard | Transparent | 93% | －30 to 80°C |
| ACBA | Standard | Brown Smoke | 25% | |
| ACDA | Standard | Orange | 43% | |
| ACTA | Antistatic | Transparent | 79% | |
| ACBTA | Antistatic | Brown Smoke | 32% |
■ Standard Type
[ ! ] Not flame-retardant.
| Type | [M]Grade | Color | Light Transmittance | Operating Ambient Temperature |
| ACA | Standard | Transparent | 93% | －30 to 80°C |
| ACA-G | ||||
| ACBA | Brown Smoke | 25% | ||
| ACDA | Orange | 43% | ||
| ACTA | Antistatic | Transparent | 79% | |
| ACBTA | Brown Smoke | 32% |
■Material information (for reference)
| Type | ||
| ACA | Kanase | Kanase Lite #1300 |
| ACBA | Kanase | Kanase Lite #1382 |
| ACDA | Kanase | Kanase Lite #1351 |
| ACTA | Sekisui Chemical | AC405AS |
| ACBTA | Sekisui Chemical | AC425AS |
Acrylic plate characteristic values
[ ! ] Listed values are for reference, not guaranteed.
| Item | Testing Method JIS | Unit | Acrylic (cast) | |||
| Standard | Antistatic | |||||
| Mechanical Properties | Tensile Strength | K－7113 | Mpa {kgf/cm2} | 75 {760} | 75 {760} | |
| Elongation | K－7113 | % | 2 to 7 | 5 | ||
| Bending Strength | K－7203 | Mpa {kgf/cm2} | 117 {1200} | 106 {1080} | ||
| Flexural Modulus | K－7203 | Mpa | 3.2 × 103 | 3.3 × 103 | ||
| Compression Strength | Yield Point | K－7181 | Mpa {kgf/cm2} | 124 {1270} | — | |
| Izod Impact Strength | K－7110 | kJ/m2 | 2.7 | — | ||
| Rockwell Hardness | M Scale | — | — | 100 | 100 | |
| Thermal Characteristics | Continuous Use | — | °C | －30 to 80 | — | |
| Deflection Temp. Under Load | 0.45 MPa | K－7191 | °C | 100 | 85 | |
| Linear Expansion Coefficient | K－7140 | °C－1 | 7.0 × 10－5 | 5.9 × 10－5 | ||
| Thermal Conductivity | — | W/m·K | 0.21 | — | ||
| Specific Heat | — | J/g·K | 1.46 | 1.46 | ||
| Electric Characteristics | Surface Resistivity | K－6911 | Ω | > 1015 | 106Up to 108 | |
| Specific Volume Resistivity | K－6911 | Ω·cm | > 1015 | > 1017 | ||
| Insulation Breakdown Voltage | K－6911 | kV/mm | 20 | — | ||
| Dielectric Constant | 106 Hz | K－6911 | — | 3.2 | 2.9 | |
| Dissipation Factor | 106 Hz | K－6911 | — | 0.06 | 0.032 | |
| Transmittance | Light transmittance by color | Transparent | — | % | 93 | 79 |
| Smoke Brown | 25 | 32 | ||||
| Orange | — | |||||
| Smoke Gray | — | — | ||||
| Visible Light Transmittance | - | % | — | — | ||
| Others | Specific Gravity | — | — | 1.2 | 1.2 | |
| Water Absorption Ratio | K－7209 | % | 0.4 | 0.18 | ||
| Flame Resistance | — | — | × | × | ||
| Chemical Resistance | Oil | — | — | ○ | ○ | |
| Acid | — | — | ○ | ○ | ||
| Alkali | — | — | ○ | ○ | ||
| Organic Solvent | — | — | × ～△ | × ～△ | ||
Part Number Display Method
■Number of Holes Combination Type (With Corner Holes Pre-Drilled)
■Number of Holes Combination Type (No Corner Drilling)
■ Hole Machined Type
■Standard Size
■Large Size
■4-side Milling
| Part Number | — | A | — | B | — | T | — | C | — | D | — | Screw Nominal Dia. |
| ACA33W8 | — | 200 | — | 100 | — | 5 | — | C20 | — | D10 | — | N5 |
| Part Number | — | A | — | B | — | T | — | C | — | D | — | R | — | S | — | Screw Nominal Dia. |
| ACA22V8 | — | 200 | — | 100 | — | 5 | — | C60 | — | D20 | — | R20 | — | S60 | — | N5 |
| Part Number | — | A | — | B | — | T | — | F | — | G | — | Screw Nominal Dia. | — | L |
| ACA6H ACA6H | — — | 800 800 | — — | 400 400 | — — | 3 8 | — — | F250 F250 | — — | G355 G300 | — — | N3 M4 | — | L6 |
| Part Number | — | A | — | B | — | T |
| ACTA | — | 955 | — | 825 | — | 3 |
| ACA-G | — | 500 | — | 400 | — | 50 |
| Part Number | — | A | — | B | — | T |
| L−ACA | — | 1500 | — | 800 | — | 5 |
| Part Number | — | A | — | B | — | T |
| ACA4FQ | — | 300 | — | 200 | — | 15 |
Specification Table
■Number of Holes Combination Type (With Corner Holes Pre-Drilled)
[!] Dimension C and D Specification Range: Please specify after confirming the processing conditions in the drilling details.
When drilling through holes or countersunk holes, a distance of 2.5 mm or more is required between the holes or between the end faces and holes. A diameter of 5 mm or more is required for keyholes.
| Part Number | A | B | T Selection | Hole position indication | Bolt Nominal Dia. Selection | ||||||||||||||||||||||
| Type | combination of holes | C | D | Through Hole | Countersunk Hole | Keyhole | Threaded Insert | ||||||||||||||||||||
| Side A Number of Holes | Side B Number of Holes | Hole Machining Shape | Number of Holes | 1 mm Increments | ACA | ACBA | ACDA ACTA ACBTA | 0.5 mm Increments Unit | N | P | Q | M | L | ||||||||||||||
| ACA ACBA ACDA ACTA ACBTA | 1 2 3 4 5 | 1 2 3 4 5 | W | 1 3 5 8 12 16 | 2 4 6 10 14 | 20 ～ 1200 | 20 ～ 1000 | 3 | 3 | 3 | 6 ～ 1191.5 | 6 ～ 991.5 | 3 4 5 6 8 10 | 3 | 5 6 8 | — | Select from Table 1 | ||||||||||
| 4 | 4 | — | 3 | 4 | 5 | 3 | |||||||||||||||||||||
| 5 | 5 | 5 | 3 | 4 | 5 | 6 | 3 | 4 | |||||||||||||||||||
| 6 | 6 | — | 4 | 5 | 6 | 4 | 5 | ||||||||||||||||||||
| 8 | 8 | — | 4 | 5 | 6 | 8 | 4 | 5 | 6 | ||||||||||||||||||
| 10 | 10 | — | 4 | 5 | 6 | 8 | 10 | 4 | 5 | 6 | 8 | ||||||||||||||||
| ACA | 20 ～ 800 | 20 ～ 600 | 15 | — | — | 6 ～ 795.5 | 6 ～ 591.5 | 4 | 5 | 6 | 8 | 10 | 5 | 6 | 8 | 10 | |||||||||||
| 20 | — | — | 4 | 5 | 6 | 8 | 10 | 5 | 6 | 8 | 10 | ||||||||||||||||
| 25 | — | — | 4 | 5 | 6 | 8 | 10 | 5 | 6 | 8 | 10 | ||||||||||||||||
When drilling through holes or countersunk holes, a distance of 2.5 mm or more is required between the holes or between the end faces and holes. A diameter of 5 mm or more is required for keyholes.
● T Dimension Tolerance
● Dimension tolerance of A and B ±1.0
Acrylic Plates (Cast)
Same as Standard Type.
| T | T Dimension Tolerance |
| 3 | ±0.5 |
| 4·5 | ±0.6 |
| 6 | ±0.8 |
| 8 | ±0.9 |
| 10 | ±1.1 |
| 15 | ±1.5 |
| 20 | ±2.0 |
| 25 | ±2.5 |
Acrylic Plates (Cast)
Same as Standard Type.
■Number of Holes Combination Type (No Corner Drilling)
[!] Dimension C, D, R, and S Specification Range: Please specify after confirming the processing conditions in the drilling details.
When drilling through holes, countersunk holes or threaded inserts, a distance of 2.5 mm or more is required between the holes or between the end faces and holes. A diameter of 5 mm or more is required for keyholes.
| Part Number | A | B | T Selection | Hole position indication | Bolt Nominal Dia. Selection | |||||||||||||||||||||||
| Type | combination of holes | C | D | R | S | Through Hole | Countersunk Hole | Keyhole | Threaded Insert | |||||||||||||||||||
| Side A Number of Holes | Side B Number of Holes | Hole Machining Shape | Number of Holes | 1 mm Increments | ACA | ACBA | ACDA ACTA ACBTA | 0.5 mm Increments | N | P | Q | M | L | |||||||||||||||
| ACA ACBA ACDA ACTA ACBTA | 1 2 3 4 | 1 2 3 4 | V | 4 6 8 10 12 14 16 | 20 ～ 1200 | 20 ～ 1000 | 3 | 3 | 3 | 6 ～ 1191.5 | 6 ～ 991.5 | 6 ～ 1191.5 | 6 ～ 991.5 | 3 4 5 6 8 10 | 3 | 5 6 8 | — | table1 from Selection | ||||||||||
| 4 | 4 | — | 3 | 4 | 5 | 3 | ||||||||||||||||||||||
| 5 | 5 | 5 | 3 | 4 | 5 | 6 | 3 | 4 | ||||||||||||||||||||
| 6 | 6 | — | 4 | 5 | 6 | 4 | 5 | |||||||||||||||||||||
| 8 | 8 | — | 4 | 5 | 6 | 8 | 4 | 5 | 6 | |||||||||||||||||||
| 10 | 10 | — | 4 | 5 | 6 | 8 | 10 | 4 | 5 | 6 | 8 | |||||||||||||||||
| ACA | 20 ～ 800 | 20 ～ 600 | 15 | — | — | 6 ～ 795.5 | 6 ～ 591.5 | 6 ～ 795.5 | 6 ～ 591.5 | 4 | 5 | 6 | 8 | 10 | 5 | 6 | 8 | 10 | ||||||||||
| 20 | — | — | 4 | 5 | 6 | 8 | 10 | 5 | 6 | 8 | 10 | |||||||||||||||||
| 25 | — | — | 4 | 5 | 6 | 8 | 10 | 5 | 6 | 8 | 10 | |||||||||||||||||
When drilling through holes, countersunk holes or threaded inserts, a distance of 2.5 mm or more is required between the holes or between the end faces and holes. A diameter of 5 mm or more is required for keyholes.
● T Dimension Tolerance
● Dimension tolerance of A and B ±1.0
Acrylic Plates (Cast)
Same as Standard Type.
[!] Dimension F Specification Range – 2H/4H type selection: d (d1) + 2.5 ≤ F ≤ A - d (d1) - 5; for 2HL: d (d1)/2 + 2.5 ≤ F ≤ A − d (d1)/2 - 2.5;
for 6H and 8H: d (d1) + 2.5 ≤ F ≤ (A - d (d1) - 5)/2 is required.
[!]Dimension G Specification Range – 2H type selection: d (d1)/2 + 2.5 ≤ G ≤ B - d (d1)/2 - 2.5; for 2HL, 4H and 6H: d (d1) + 2.5 ≤ G ≤ B - d (d1) - 5;
for 8H: d (d1) + 2.5 ≤ G ≤ (B - d (d1) - 5)/2 is required. (d for through hole, d1 for countersunk)
■ Standard Type| T | T Dimension Tolerance |
| 3 | ±0.5 |
| 4·5 | ±0.6 |
| 6 | ±0.8 |
| 8 | ±0.9 |
| 10 | ±1.1 |
| 15 | ±1.5 |
| 20 | ±2.0 |
| 25 | ±2.5 |
Acrylic Plates (Cast)
Same as Standard Type.
| ■ Hole Machined Type | |||||||||||||||||||||||
| Material Code | Number of Holes | A | B | T Selection | F | G | Bolt Nominal Dia. Selection | ||||||||||||||||
| Through Hole | Countersunk Hole | Keyhole | Threaded Insert | ||||||||||||||||||||
| 1 mm Increments | ACA | ACBA | ACDA ACTA ACBTA | 0.5 mm Increments | N | P | Q | M | L | ||||||||||||||
| ACA (Standard, Transparent) ACBA (Standard, Smoke Brown) ACDA (Standard, Orange) ACTA (Antistatic, Transparent) ACBTA (Antistatic, Smoke Brown) | 2H(Horizontal) 2HL(Vertical) 4H 6H 8H | 20 to 1200 | 20 to 1000 | 3 | 3 | 3 | 6 to 1191.5 (2H·4H) 4.5 to 1195.5 (2HL) 6 to 595.5 (6H·8H) | 4.5 to 995.5 (2H) 6 to 991.5 (2HL·4H·6H) 6 to 495.5 (8H) | 3 4 5 6 8 10 | 3 | 5 6 8 | - | from Table 1 Selection | ||||||||||
| 4 | 4 | - | 3 | 4 | 5 | 3 | |||||||||||||||||
| 5 | 5 | 5 | 3 | 4 | 5 | 6 | 3 | 4 | |||||||||||||||
| 6 | 6 | - | 4 | 5 | 6 | 4 | 5 | ||||||||||||||||
| 8 | 8 | - | 4 | 5 | 6 | 8 | 4 | 5 | 6 | ||||||||||||||
| 10 | 10 | - | 4 | 5 | 6 | 8 | 10 | 4 | 5 | 6 | 8 | ||||||||||||
| ACA (Standard, Transparent) | 20 to 800 | 20 to 600 | 15 | - | - | 6 to 791.5 (2H·4H) 4.5 to 795.5 (2HL) 6 to 395.5 (6H·8H) | 4.5 to 595.5 (2H) 6 to 591.5 (2HL·4H·6H) 6 to 295.5 (8H) | 5 | 6 | 8 | 10 | 5 | 6 | 8 | 10 | ||||||||
| 20 | - | - | 5 | 6 | 8 | 10 | 5 | 6 | 8 | 10 | |||||||||||||
| 25 | - | - | 5 | 6 | 8 | 10 | 5 | 6 | 8 | 10 | |||||||||||||
for 6H and 8H: d (d1) + 2.5 ≤ F ≤ (A - d (d1) - 5)/2 is required.
[!]Dimension G Specification Range – 2H type selection: d (d1)/2 + 2.5 ≤ G ≤ B - d (d1)/2 - 2.5; for 2HL, 4H and 6H: d (d1) + 2.5 ≤ G ≤ B - d (d1) - 5;
for 8H: d (d1) + 2.5 ≤ G ≤ (B - d (d1) - 5)/2 is required. (d for through hole, d1 for countersunk)
● T Dimension Tolerance
● Dimension tolerance of A and B ±1.0
| T | T Dimension Tolerance |
| 3 | ±0.5 |
| 4·5 | ±0.6 |
| 6 | ±0.8 |
| 8 | ±0.9 |
| 10 | ±1.1 |
| 15 | ±1.5 |
| 20 | ±2.0 |
| 25 | ±2.5 |
| Part Number | A | B | T | ||
| Material | Finish Selection | A, B Dimension Tolerance | |||
| Standard Size | Circular sawing | 1 mm Increments | Selection | ||
| ACA (Standard, Transparent) | - | Not available | 20 to 1200 | 20 to 1000 | 3·4·5·6·8·10 |
| 20 to 800 | 20 to 600 | 15·20·25 | |||
| ACA-G (Standard, Transparent, Thick Plate Type) | 20 to 800 | 13 | |||
| (30)Up to 800 | (30)Up to 800 | 30·40·50 | |||
| ACBA (Standard, Smoke Brown) | 20 to 1200 | 20 to 1000 | 3·4·5·6·8·10 | ||
| ACDA (Standard, Orange) ACTA (Antistatic, Transparent) ACBTA (Antistatic, Smoke Brown) | 3·5 | ||||
| Large Size | 1201 to 2000 | 20 to 1000 | 3·5 | ||
| L−ACA (Standard, Transparent) L−ACBA (Standard, Smoke Brown) L−ACTA (Antistatic, Transparent) L−ACBTA (Antistatic, Smoke Brown) | |||||
| Standard Size | 4-side Milling | 0.1 mm Increments | Selection | ||
| ACA (Standard, Transparent) | 4F | Q (0 to +0.2) N (±0.1) M (-0.2 to 0) | 10 to 400 | 10 to 200 | 5·6·8·10·15·20·25 |
| ACBA (Standard, Smoke Brown) | 5·6·8·10 | ||||
| ACDA (Standard, Orange) ACTA (Antistatic, Transparent) ACBTA (Antistatic, Smoke Brown) | 5 | ||||
● T Dimension Tolerance
● Dimension tolerance of A and B ±1.0
| T | T Dimension Tolerance |
| 3 | ±0.5 |
| 4·5 | ±0.6 |
| 6 | ±0.8 |
| 8 | ±0.9 |
| 10·13 | ±1.1 |
| 15 | ±1.5 |
| 20 | ±2.0 |
| 25 to 50 | ±2.5 |
Alterations
■Number of Holes Combination Type (With Corner Holes Pre-Drilled)| Part Number | — | A | — | B | — | T | — | C | — | D | — | Screw Nominal Dia. | — | (Alterations) |
| ACA33W8 | — | 200 | — | 100 | — | 5 | — | C20 | — | D10 | — | N5 | — | ACC |
| Alterations | Same Dimension Machining for 4 Corners | |||||||
 |  | |||||||
| Code | ACC | ACR | ||||||
| Spec. | All four corners can be cut and radius machined to the same dimensions (5 mm). ·ACC: Corner 5 mm Cut ·ACR: Corner 5 mm Radius Machining [ ! ] For the machining conditions of the hole and plate end face, see 
| |||||||
■Number of Holes Combination Type (No Corner Drilling)
| Part Number | — | A | — | B | — | T | — | C | — | D | — | R | — | S | — | Screw Nominal Dia. | — | (Alterations) |
| ACA22V8 | — | 200 | — | 100 | — | 5 | — | C60 | — | D20 | — | R20 | — | S60 | — | N5 | — | ACR |
| Alterations | Same Dimension Machining for 4 Corners | |||||||
| | |||||||
| Code | ACC | ACR | ||||||
| Spec. | All four corners can be cut and radius machined to the same dimensions (5 mm). ·ACC: Corner 5 mm Cut ·ACR: Corner 5 mm Radius Machining [ ! ] For the machining conditions of the hole and plate end face, see
| |||||||
■ Hole Machined Type
| Part Number | — | A | — | B | — | T | — | F | — | G | — | Screw Nominal Dia. | — | (XC·YC) |
| ACA4H | — | 200 | — | 100 | — | 4 | — | F160 | — | G50 | — | N6 | — | XC15-YC355 |
| Alterations | Hole Position from Left | Hole Position from Bottom | Same Dimension Machining for 4 Corners | |||||||
 |  | | | |||||||
| Code | XC | YC | ACC | ACR | ||||||
| Spec. | XC = 0.5 mm Increments [ ! ] For the machining conditions of the hole and plate end face, see Hole Machining Conditions under Hole Machining Details [ ! ]Can be specified only for Hole Machined Type (2H to 8H) | YC = 0.5 mm Increments [ ! ] For the machining conditions of the hole and plate end face, see Hole Machining Conditions under Hole Machining Details [ ! ] | All four corners can be cut and radius machined to the same dimensions (5 mm). ·ACC: Corner 5 mm Cut ·ACR: Corner 5 mm Radius Machining [ ! ] For the machining conditions of the hole and plate end face, see
| |||||||
■ Standard Type
| Part Number | — | A | — | B | — | T | — | (CRA: etc) |
| ACA | — | 100 | — | 80 | — | 3 | — | CRA10－CRC10 |
| Alterations | Aluminum Extrusion Blind Joint Notch | Relief at 4 Corners | Corner Cut, Corner Radius Machining | Same Dimension Machining for 4 Corners | ||||
 |  |  | | | ||||
| Code | F□□, E□□, J□□, K□□ | CN | CCA·CCB·CCC·CCD CRA·CRB·CRC·CRD | ACC | ACR | |||
| Spec. | Machines relief for blind joints of aluminum extrusions. [ ! ] Can only be specified for the standard sizes of standard types | Machines relief at 4 corners. CN = 1 mm Increments [ ! ]5 ≤ CN ≤ 50 Ordering Code CN = 25→CN25 [ ! ] Can only be specified for the standard sizes of standard types | Machines any corner (ABCD) upon request. 5 mm increments ·CCA5 = A Corner 5 mm Cut ·CRB5 = B Corner 5 mm Radius Machining [ ! ] Can only be specified for the standard sizes of standard types [ ! ] Cannot be combined with Same Dimension Machining for 4 Corners | All four corners can be cut and radius machined to the same dimensions (5 mm). ·ACC: Corner 5 mm Cut ·ACR: Corner 5 mm Radius Machining [ ! ] For the machining conditions of the hole and plate end face, see Hole Machining Conditions under | ||||
[ ! ] Alteration can only be specified for the standard sizes
Properties
Acrylic properties
Excels in transparency, weather resistance and machinability, and is used widely for indoor and outdoor purposes, such as covers for industrial machinery, art display cases and signboards.
Characteristics of Acrylic Cast Plates and Extruded Plates
As for Acrylic Plates, cast plates made by cell-cast method and extruded plates are available.
Cast plates have better heat resistance and stronger mechanical strength than extruded plates. Extruded plates are more inexpensive than cast plates.
When extruded plates have contact with vaporizing liquid such as methanol and methylene chloride after they are thermal-processed with laser or others, they may have cracks.
Also, extruded plates may have deflection at high temperature.
Technical Information
Transmittance Curve on Each Wavelength
Transmittance Curve on Each Wavelength (3 mm)Alterations
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| ACA2H-[20-1200/1]-[20-1000/1]-[4,5,6,8,10,15,20,25]-F[6-1191.5/0.5]-G[4.5-995.5/0.5]-M[3,4,5,6,8,10] |
| ACA2H-[20-1200/1]-[20-1000/1]-[4,5,6,8,10,15,20,25]-F[6-1191.5/0.5]-G[4.5-995.5/0.5]-N[3,4,5,6,8,10] |
| ACA2H-[20-1200/1]-[20-1000/1]-[4,5,6,8,10,15,20,25]-F[6-1191.5/0.5]-G[4.5-995.5/0.5]-P[3,4,5,6,8,10] |
| ACA2H-[20-1200/1]-[20-1000/1]-[4,5,6,8,10,15,20,25]-F[6-1191.5/0.5]-G[4.5-995.5/0.5]-Q[5,6,8] |
| ACA2HL-[20-1200/1]-[20-1000/1]-[4,5,6,8,10,15,20,25]-F[4.5-1195.5/0.5]-G[6-991.5/0.5]-M[3,4,5,6,8,10] |
| ACA2HL-[20-1200/1]-[20-1000/1]-[4,5,6,8,10,15,20,25]-F[4.5-1195.5/0.5]-G[6-991.5/0.5]-N[3,4,5,6,8,10] |
| ACA2HL-[20-1200/1]-[20-1000/1]-[4,5,6,8,10,15,20,25]-F[4.5-1195.5/0.5]-G[6-991.5/0.5]-P[3,4,5,6,8,10] |
| ACA2HL-[20-1200/1]-[20-1000/1]-[4,5,6,8,10,15,20,25]-F[4.5-1195.5/0.5]-G[6-991.5/0.5]-Q[5,6,8] |
| ACA4FM-[10-400/0.1]-[10-200/0.1]-[5,6,8,10,15,20,25] |
| ACA4FN-[10-400/0.1]-[10-200/0.1]-[5,6,8,10,15,20,25] |
| ACA4FQ-[10-400/0.1]-[10-200/0.1]-[5,6,8,10,15,20,25] |
| ACA4H-[20-1200/1]-[20-1000/1]-[4,5,6,8,10,15,20,25]-F[6-1191.5/0.5]-G[6-991.5/0.5]-M[3,4,5,6,8,10] |
| ACA4H-[20-1200/1]-[20-1000/1]-[4,5,6,8,10,15,20,25]-F[6-1191.5/0.5]-G[6-991.5/0.5]-N[3,4,5,6,8,10] |
| ACA4H-[20-1200/1]-[20-1000/1]-[4,5,6,8,10,15,20,25]-F[6-1191.5/0.5]-G[6-991.5/0.5]-P[3,4,5,6,8,10] |
| ACA4H-[20-1200/1]-[20-1000/1]-[4,5,6,8,10,15,20,25]-F[6-1191.5/0.5]-G[6-991.5/0.5]-Q[5,6,8] |
| ACA6H-[20-1200/1]-[20-1000/1]-[4,5,6,8,10,15,20,25]-F[6-595.5/0.5]-G[6-991.5/0.5]-M[3,4,5,6,8,10] |
| ACA6H-[20-1200/1]-[20-1000/1]-[4,5,6,8,10,15,20,25]-F[6-595.5/0.5]-G[6-991.5/0.5]-N[3,4,5,6,8,10] |
| ACA6H-[20-1200/1]-[20-1000/1]-[4,5,6,8,10,15,20,25]-F[6-595.5/0.5]-G[6-991.5/0.5]-P[3,4,5,6,8,10] |
| ACA6H-[20-1200/1]-[20-1000/1]-[4,5,6,8,10,15,20,25]-F[6-595.5/0.5]-G[6-991.5/0.5]-Q[5,6,8] |
| ACA8H-[20-1200/1]-[20-1000/1]-[4,5,6,8,10,15,20,25]-F[6-595.5/0.5]-G[6-495.5/0.5]-M[3,4,5,6,8,10] |
| ACA8H-[20-1200/1]-[20-1000/1]-[4,5,6,8,10,15,20,25]-F[6-595.5/0.5]-G[6-495.5/0.5]-N[3,4,5,6,8,10] |
| ACA8H-[20-1200/1]-[20-1000/1]-[4,5,6,8,10,15,20,25]-F[6-595.5/0.5]-G[6-495.5/0.5]-P[3,4,5,6,8,10] |
| ACA8H-[20-1200/1]-[20-1000/1]-[4,5,6,8,10,15,20,25]-F[6-595.5/0.5]-G[6-495.5/0.5]-Q[5,6,8] |
| ACA22V8-[20-1200/1]-[20-1000/1]-[4,5,6,8,10,15,20,25]-C[6-1191.5/0.5]-D[6-991.5/0.5]-R[6-1191.5/0.5]-S[6-991.5/0.5]-M[3,4,5,6,8,10] |
| ACA22V8-[20-1200/1]-[20-1000/1]-[4,5,6,8,10,15,20,25]-C[6-1191.5/0.5]-D[6-991.5/0.5]-R[6-1191.5/0.5]-S[6-991.5/0.5]-N[3,4,5,6,8,10] |
| ACA22V8-[20-1200/1]-[20-1000/1]-[4,5,6,8,10,15,20,25]-C[6-1191.5/0.5]-D[6-991.5/0.5]-R[6-1191.5/0.5]-S[6-991.5/0.5]-P[3,4,5,6,8,10] |
| ACA22V8-[20-1200/1]-[20-1000/1]-[4,5,6,8,10,15,20,25]-C[6-1191.5/0.5]-D[6-991.5/0.5]-R[6-1191.5/0.5]-S[6-991.5/0.5]-Q[5,6,8] |
| ACA-[20-1200/1]-[20-1000/1]-[4,5,6,8,10,15,20,25] |
| ACBA2H-[20-1200/1]-[20-1000/1]-[4,5,6,8,10]-F[6-1191.5/0.5]-G[4.5-995.5/0.5]-M[3,4,5,6,8] |
| ACBA2H-[20-1200/1]-[20-1000/1]-[4,5,6,8,10]-F[6-1191.5/0.5]-G[4.5-995.5/0.5]-N[3,4,5,6,8,10] |
| ACBA2H-[20-1200/1]-[20-1000/1]-[4,5,6,8,10]-F[6-1191.5/0.5]-G[4.5-995.5/0.5]-P[3,4,5,6,8,10] |
| ACBA2H-[20-1200/1]-[20-1000/1]-[4,5,6,8,10]-F[6-1191.5/0.5]-G[4.5-995.5/0.5]-Q[5,6,8] |
| ACBA2HL-[20-1200/1]-[20-1000/1]-[4,5,6,8,10]-F[4.5-1195.5/0.5]-G[6-991.5/0.5]-M[3,4,5,6,8] |
| ACBA2HL-[20-1200/1]-[20-1000/1]-[4,5,6,8,10]-F[4.5-1195.5/0.5]-G[6-991.5/0.5]-N[3,4,5,6,8,10] |
| ACBA2HL-[20-1200/1]-[20-1000/1]-[4,5,6,8,10]-F[4.5-1195.5/0.5]-G[6-991.5/0.5]-P[3,4,5,6,8] |
| ACBA2HL-[20-1200/1]-[20-1000/1]-[4,5,6,8,10]-F[4.5-1195.5/0.5]-G[6-991.5/0.5]-Q[5,6,8] |
| ACBA4FM-[10-400/0.1]-[10-200/0.1]-[5,6,8,10] |
| ACBA4FN-[10-400/0.1]-[10-200/0.1]-[5,6,8,10] |
| ACBA4FQ-[10-400/0.1]-[10-200/0.1]-[5,6,8,10] |
| ACBA4H-[20-1200/1]-[20-1000/1]-[4,5,6,8,10]-F[6-1191.5/0.5]-G[6-991.5/0.5]-M[3,4,5,6,8] |
| ACBA4H-[20-1200/1]-[20-1000/1]-[4,5,6,8,10]-F[6-1191.5/0.5]-G[6-991.5/0.5]-N[3,4,5,6,8,10] |
| ACBA4H-[20-1200/1]-[20-1000/1]-[4,5,6,8,10]-F[6-1191.5/0.5]-G[6-991.5/0.5]-P[3,4,5,6,8,10] |
| ACBA4H-[20-1200/1]-[20-1000/1]-[4,5,6,8,10]-F[6-1191.5/0.5]-G[6-991.5/0.5]-Q[5,6,8] |
| ACBA6H-[20-1200/1]-[20-1000/1]-[4,5,6,8,10]-F[6-595.5/0.5]-G[6-991.5/0.5]-M[3,4,5,6,8] |
| ACBA6H-[20-1200/1]-[20-1000/1]-[4,5,6,8,10]-F[6-595.5/0.5]-G[6-991.5/0.5]-N[3,4,5,6,8,10] |
| ACBA6H-[20-1200/1]-[20-1000/1]-[4,5,6,8,10]-F[6-595.5/0.5]-G[6-991.5/0.5]-P[3,4,5,6,8,10] |
| ACBA6H-[20-1200/1]-[20-1000/1]-[4,5,6,8,10]-F[6-595.5/0.5]-G[6-991.5/0.5]-Q[5,6,8] |
| ACBA8H-[20-1200/1]-[20-1000/1]-[4,5,6,8,10]-F[6-595.5/0.5]-G[6-495.5/0.5]-M[3,4,5,6,8] |
| ACBA8H-[20-1200/1]-[20-1000/1]-[4,5,6,8,10]-F[6-595.5/0.5]-G[6-495.5/0.5]-N[3,4,5,6,8,10] |
| ACBA8H-[20-1200/1]-[20-1000/1]-[4,5,6,8,10]-F[6-595.5/0.5]-G[6-495.5/0.5]-P[3,4,5,6,8,10] |
| ACBA8H-[20-1200/1]-[20-1000/1]-[4,5,6,8,10]-F[6-595.5/0.5]-G[6-495.5/0.5]-Q[5,6,8] |
| ACBA22V8-[20-1200/1]-[20-1000/1]-[4,5,6,8,10]-C[6-1191.5/0.5]-D[6-991.5/0.5]-R[6-1191.5/0.5]-S[6-991.5/0.5]-M[3,4,5,6,8] |
| ACBA22V8-[20-1200/1]-[20-1000/1]-[4,5,6,8,10]-C[6-1191.5/0.5]-D[6-991.5/0.5]-R[6-1191.5/0.5]-S[6-991.5/0.5]-N[3,4,5,6,8,10] |
| ACBA22V8-[20-1200/1]-[20-1000/1]-[4,5,6,8,10]-C[6-1191.5/0.5]-D[6-991.5/0.5]-R[6-1191.5/0.5]-S[6-991.5/0.5]-P[3,4,5,6,8,10] |
| ACBA22V8-[20-1200/1]-[20-1000/1]-[4,5,6,8,10]-C[6-1191.5/0.5]-D[6-991.5/0.5]-R[6-1191.5/0.5]-S[6-991.5/0.5]-Q[5,6,8] |
| ACBA24V12-[20-1200/1]-[20-1000/1]-[4,5,6,8,10]-C[6-1191.5/0.5]-D[6-991.5/0.5]-R[6-1191.5/0.5]-S[6-991.5/0.5]-M[3,4,5,6,8] |
| ACBA24V12-[20-1200/1]-[20-1000/1]-[4,5,6,8,10]-C[6-1191.5/0.5]-D[6-991.5/0.5]-R[6-1191.5/0.5]-S[6-991.5/0.5]-N[3,4,5,6,8,10] |
| ACBA24V12-[20-1200/1]-[20-1000/1]-[4,5,6,8,10]-C[6-1191.5/0.5]-D[6-991.5/0.5]-R[6-1191.5/0.5]-S[6-991.5/0.5]-P[3,4,5,6,8,10] |
| ACBA24V12-[20-1200/1]-[20-1000/1]-[4,5,6,8,10]-C[6-1191.5/0.5]-D[6-991.5/0.5]-R[6-1191.5/0.5]-S[6-991.5/0.5]-Q[5,6,8] |
| ACBA44W12-[20-1200/1]-[20-1000/1]-[4,5,6,8,10]-C[6-1191.5/0.5]-D[6-991.5/0.5]-M[3,4,5,6,8] |
| ACBA44W12-[20-1200/1]-[20-1000/1]-[4,5,6,8,10]-C[6-1191.5/0.5]-D[6-991.5/0.5]-N[3,4,5,6,8,10] |
| ACBA44W12-[20-1200/1]-[20-1000/1]-[4,5,6,8,10]-C[6-1191.5/0.5]-D[6-991.5/0.5]-P[3,4,5,6,8,10] |
| ACBA44W12-[20-1200/1]-[20-1000/1]-[4,5,6,8,10]-C[6-1191.5/0.5]-D[6-991.5/0.5]-Q[5,6,8] |
| ACBA-[20-1200/1]-[20-1000/1]-[4,5,6,8,10] |
| ACBTA2H-[20-1200/1]-[20-1000/1]-5-F[6-1191.5/0.5]-G[4.5-995.5/0.5]-M[3,4] |
| ACBTA2H-[20-1200/1]-[20-1000/1]-5-F[6-1191.5/0.5]-G[4.5-995.5/0.5]-N[3,4,5,6,8,10] |
| ACBTA2H-[20-1200/1]-[20-1000/1]-5-F[6-1191.5/0.5]-G[4.5-995.5/0.5]-P[3,4,5,6] |
| ACBTA2H-[20-1200/1]-[20-1000/1]-5-F[6-1191.5/0.5]-G[4.5-995.5/0.5]-Q[5,6,8] |
| ACBTA2HL-[20-1200/1]-[20-1000/1]-5-F[4.5-1195.5/0.5]-G[6-991.5/0.5]-M[3,4] |
| ACBTA2HL-[20-1200/1]-[20-1000/1]-5-F[4.5-1195.5/0.5]-G[6-991.5/0.5]-N[3,4,5,6,8,10] |
| ACBTA2HL-[20-1200/1]-[20-1000/1]-5-F[4.5-1195.5/0.5]-G[6-991.5/0.5]-P[3,4,5,6] |
| ACBTA2HL-[20-1200/1]-[20-1000/1]-5-F[4.5-1195.5/0.5]-G[6-991.5/0.5]-Q[5,6,8] |
| ACBTA4FM-[10-400/0.1]-[10-200/0.1]-5 |
| ACBTA4FN-[10-400/0.1]-[10-200/0.1]-5 |
| ACBTA4FQ-[10-400/0.1]-[10-200/0.1]-5 |
| ACBTA4H-[20-1200/1]-[20-1000/1]-5-F[6-1191.5/0.5]-G[6-991.5/0.5]-M[3,4] |
| ACBTA4H-[20-1200/1]-[20-1000/1]-5-F[6-1191.5/0.5]-G[6-991.5/0.5]-N[3,4,5,6,8,10] |
| ACBTA4H-[20-1200/1]-[20-1000/1]-5-F[6-1191.5/0.5]-G[6-991.5/0.5]-P[3,4,5,6] |
| ACBTA4H-[20-1200/1]-[20-1000/1]-5-F[6-1191.5/0.5]-G[6-991.5/0.5]-Q[5,6,8] |
| ACBTA6H-[20-1200/1]-[20-1000/1]-5-F[6-595.5/0.5]-G[6-991.5/0.5]-M[3,4] |
| ACBTA6H-[20-1200/1]-[20-1000/1]-5-F[6-595.5/0.5]-G[6-991.5/0.5]-N[3,4,5,6,8,10] |
| ACBTA6H-[20-1200/1]-[20-1000/1]-5-F[6-595.5/0.5]-G[6-991.5/0.5]-P[3,4,5,6] |
| ACBTA6H-[20-1200/1]-[20-1000/1]-5-F[6-595.5/0.5]-G[6-991.5/0.5]-Q[5,6,8] |
| ACBTA8H-[20-1200/1]-[20-1000/1]-5-F[6-595.5/0.5]-G[6-495.5/0.5]-M[3,4] |
| ACBTA8H-[20-1200/1]-[20-1000/1]-5-F[6-595.5/0.5]-G[6-495.5/0.5]-N[3,4,5,6,8,10] |
| ACBTA8H-[20-1200/1]-[20-1000/1]-5-F[6-595.5/0.5]-G[6-495.5/0.5]-P[3,4,5,6] |
| ACBTA8H-[20-1200/1]-[20-1000/1]-5-F[6-595.5/0.5]-G[6-495.5/0.5]-Q[5,6,8] |
| ACBTA-[20-1200/1]-[20-1000/1]-5 |
| ACDA2H-[20-1200/1]-[20-1000/1]-5-F[6-1191.5/0.5]-G[4.5-995.5/0.5]-M[3,4] |
| ACDA2H-[20-1200/1]-[20-1000/1]-5-F[6-1191.5/0.5]-G[4.5-995.5/0.5]-N[3,4,5,6,8,10] |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Environmentally Friendly | Color | Grade | Hole Machining | Volume Resistivity Value (Ω･cm) | A/B Dimension Tolerance | Number of Holes on A Side | Number of Holes on B Side | Shape | 4-surface Finishing Method | 4-surface Tolerance Selectable | Number of Holes | A (mm) | B (mm) | F (mm) | G (mm) | M (mm) | N (mm) | P (mm) | Q (mm) | T (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | 12 Day(s) or more | 10 | - | Transparent | Standard | 2H | ＞10^15 | ±1.0 | - | - | Number of Holes Selection Type (With 2H to 8H Holes) | Circular Sawing | - | - | 20 ～ 1200 | 20 ～ 1000 | 6 ～ 1191.5 | 4.5 ～ 995.5 | 3 ～ 10 | - | - | - | 3 ～ 25 | ||
- | 1 Piece(s) | 12 Day(s) or more | 10 | - | Transparent | Standard | 2H | ＞10^15 | ±1.0 | - | - | Number of Holes Selection Type (With 2H to 8H Holes) | Circular Sawing | - | - | 20 ～ 1200 | 20 ～ 1000 | 6 ～ 1191.5 | 4.5 ～ 995.5 | - | 3 ～ 10 | - | - | 3 ～ 25 | ||
- | 1 Piece(s) | 12 Day(s) or more | 10 | - | Transparent | Standard | 2H | ＞10^15 | ±1.0 | - | - | Number of Holes Selection Type (With 2H to 8H Holes) | Circular Sawing | - | - | 20 ～ 1200 | 20 ～ 1000 | 6 ～ 1191.5 | 4.5 ～ 995.5 | - | - | 3 ～ 10 | - | 3 ～ 25 | ||
- | 1 Piece(s) | 12 Day(s) or more | 10 | - | Transparent | Standard | 2H | ＞10^15 | ±1.0 | - | - | Number of Holes Selection Type (With 2H to 8H Holes) | Circular Sawing | - | - | 20 ～ 1200 | 20 ～ 1000 | 6 ～ 1191.5 | 4.5 ～ 995.5 | - | - | - | 5 ～ 8 | 3 ～ 25 | ||
- | 1 Piece(s) | 12 Day(s) or more | 10 | - | Transparent | Standard | 2HL | ＞10^15 | ±1.0 | - | - | Number of Holes Selection Type (With 2H to 8H Holes) | Circular Sawing | - | - | 20 ～ 1200 | 20 ～ 1000 | 4.5 ～ 1195.5 | 6 ～ 991.5 | 3 ～ 10 | - | - | - | 3 ～ 25 | ||
- | 1 Piece(s) | 12 Day(s) or more | 10 | - | Transparent | Standard | 2HL | ＞10^15 | ±1.0 | - | - | Number of Holes Selection Type (With 2H to 8H Holes) | Circular Sawing | - | - | 20 ～ 1200 | 20 ～ 1000 | 4.5 ～ 1195.5 | 6 ～ 991.5 | - | 3 ～ 10 | - | - | 3 ～ 25 | ||
- | 1 Piece(s) | 12 Day(s) or more | 10 | - | Transparent | Standard | 2HL | ＞10^15 | ±1.0 | - | - | Number of Holes Selection Type (With 2H to 8H Holes) | Circular Sawing | - | - | 20 ～ 1200 | 20 ～ 1000 | 4.5 ～ 1195.5 | 6 ～ 991.5 | - | - | 3 ～ 10 | - | 3 ～ 25 | ||
- | 1 Piece(s) | 12 Day(s) or more | 10 | - | Transparent | Standard | 2HL | ＞10^15 | ±1.0 | - | - | Number of Holes Selection Type (With 2H to 8H Holes) | Circular Sawing | - | - | 20 ～ 1200 | 20 ～ 1000 | 4.5 ～ 1195.5 | 6 ～ 991.5 | - | - | - | 5 ～ 8 | 3 ～ 25 | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | - | Transparent | Standard | No Drilling Alteration | ＞10^15 | -0.2 to 0 | - | - | No Hole Machining (Standard Type) | 4-surface Milled | M (0/-0.2) | - | 10 ～ 400 | 10 ～ 200 | - | - | - | - | - | - | 5 ～ 25 | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | - | Transparent | Standard | No Drilling Alteration | ＞10^15 | ±0.1 | - | - | No Hole Machining (Standard Type) | 4-surface Milled | N (±0.1) | - | 10 ～ 400 | 10 ～ 200 | - | - | - | - | - | - | 5 ～ 25 | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | - | Transparent | Standard | No Drilling Alteration | ＞10^15 | 0 to +0.2 | - | - | No Hole Machining (Standard Type) | 4-surface Milled | Q (+0.2/0) | - | 10 ～ 400 | 10 ～ 200 | - | - | - | - | - | - | 5 ～ 25 | ||
- | 1 Piece(s) | 12 Day(s) or more | 10 | - | Transparent | Standard | 4H | ＞10^15 | ±1.0 | - | - | Number of Holes Selection Type (With 2H to 8H Holes) | Circular Sawing | - | - | 20 ～ 1200 | 20 ～ 1000 | 6 ～ 1191.5 | 6 ～ 991.5 | 3 ～ 10 | - | - | - | 3 ～ 25 | ||
- | 1 Piece(s) | 12 Day(s) or more | 10 | - | Transparent | Standard | 4H | ＞10^15 | ±1.0 | - | - | Number of Holes Selection Type (With 2H to 8H Holes) | Circular Sawing | - | - | 20 ～ 1200 | 20 ～ 1000 | 6 ～ 1191.5 | 6 ～ 991.5 | - | 3 ～ 10 | - | - | 3 ～ 25 | ||
- | 1 Piece(s) | 12 Day(s) or more | 10 | - | Transparent | Standard | 4H | ＞10^15 | ±1.0 | - | - | Number of Holes Selection Type (With 2H to 8H Holes) | Circular Sawing | - | - | 20 ～ 1200 | 20 ～ 1000 | 6 ～ 1191.5 | 6 ～ 991.5 | - | - | 3 ～ 10 | - | 3 ～ 25 | ||
- | 1 Piece(s) | 12 Day(s) or more | 10 | - | Transparent | Standard | 4H | ＞10^15 | ±1.0 | - | - | Number of Holes Selection Type (With 2H to 8H Holes) | Circular Sawing | - | - | 20 ～ 1200 | 20 ～ 1000 | 6 ～ 1191.5 | 6 ～ 991.5 | - | - | - | 5 ～ 8 | 3 ～ 25 | ||
- | 1 Piece(s) | 12 Day(s) or more | 10 | - | Transparent | Standard | 6H | ＞10^15 | ±1.0 | - | - | Number of Holes Selection Type (With 2H to 8H Holes) | Circular Sawing | - | - | 20 ～ 1200 | 20 ～ 1000 | 6 ～ 595.5 | 6 ～ 991.5 | 3 ～ 10 | - | - | - | 3 ～ 25 | ||
- | 1 Piece(s) | 12 Day(s) or more | 10 | - | Transparent | Standard | 6H | ＞10^15 | ±1.0 | - | - | Number of Holes Selection Type (With 2H to 8H Holes) | Circular Sawing | - | - | 20 ～ 1200 | 20 ～ 1000 | 6 ～ 595.5 | 6 ～ 991.5 | - | 3 ～ 10 | - | - | 3 ～ 25 | ||
- | 1 Piece(s) | 12 Day(s) or more | 10 | - | Transparent | Standard | 6H | ＞10^15 | ±1.0 | - | - | Number of Holes Selection Type (With 2H to 8H Holes) | Circular Sawing | - | - | 20 ～ 1200 | 20 ～ 1000 | 6 ～ 595.5 | 6 ～ 991.5 | - | - | 3 ～ 10 | - | 3 ～ 25 | ||
- | 1 Piece(s) | 12 Day(s) or more | 10 | - | Transparent | Standard | 6H | ＞10^15 | ±1.0 | - | - | Number of Holes Selection Type (With 2H to 8H Holes) | Circular Sawing | - | - | 20 ～ 1200 | 20 ～ 1000 | 6 ～ 595.5 | 6 ～ 991.5 | - | - | - | 5 ～ 8 | 3 ～ 25 | ||
- | 1 Piece(s) | 12 Day(s) or more | 10 | - | Transparent | Standard | 8H | ＞10^15 | ±1.0 | - | - | Number of Holes Selection Type (With 2H to 8H Holes) | Circular Sawing | - | - | 20 ～ 1200 | 20 ～ 1000 | 6 ～ 595.5 | 6 ～ 495.5 | 3 ～ 10 | - | - | - | 3 ～ 25 | ||
- | 1 Piece(s) | 12 Day(s) or more | 10 | - | Transparent | Standard | 8H | ＞10^15 | ±1.0 | - | - | Number of Holes Selection Type (With 2H to 8H Holes) | Circular Sawing | - | - | 20 ～ 1200 | 20 ～ 1000 | 6 ～ 595.5 | 6 ～ 495.5 | - | 3 ～ 10 | - | - | 3 ～ 25 | ||
- | 1 Piece(s) | 12 Day(s) or more | 10 | - | Transparent | Standard | 8H | ＞10^15 | ±1.0 | - | - | Number of Holes Selection Type (With 2H to 8H Holes) | Circular Sawing | - | - | 20 ～ 1200 | 20 ～ 1000 | 6 ～ 595.5 | 6 ～ 495.5 | - | - | 3 ～ 10 | - | 3 ～ 25 | ||
- | 1 Piece(s) | 12 Day(s) or more | 10 | - | Transparent | Standard | 8H | ＞10^15 | ±1.0 | - | - | Number of Holes Selection Type (With 2H to 8H Holes) | Circular Sawing | - | - | 20 ～ 1200 | 20 ～ 1000 | 6 ～ 595.5 | 6 ～ 495.5 | - | - | - | 5 ～ 8 | 3 ～ 25 | ||
- | 1 Piece(s) | 6 Day(s) or more | - | RoHS compliant (10 substances) | Transparent | Standard | - | ＞10^15 | ±1.0 | 2 | 2 | Number of Holes Combination Type (Without Corner Holes) | Circular sawing | - | 8 | 20 ～ 1200 | 20 ～ 1000 | - | - | - | - | - | - | 3 ～ 25 | ||
- | 1 Piece(s) | 6 Day(s) or more | - | RoHS compliant (10 substances) | Transparent | Standard | - | ＞10^15 | ±1.0 | 2 | 2 | Number of Holes Combination Type (Without Corner Holes) | Circular sawing | - | 8 | 20 ～ 1200 | 20 ～ 1000 | - | - | - | - | - | - | 3 ～ 25 | ||
- | 1 Piece(s) | 6 Day(s) or more | - | RoHS compliant (10 substances) | Transparent | Standard | - | ＞10^15 | ±1.0 | 2 | 2 | Number of Holes Combination Type (Without Corner Holes) | Circular sawing | - | 8 | 20 ～ 1200 | 20 ～ 1000 | - | - | - | - | - | - | 3 ～ 25 | ||
- | 1 Piece(s) | 6 Day(s) or more | - | RoHS compliant (10 substances) | Transparent | Standard | - | ＞10^15 | ±1.0 | 2 | 2 | Number of Holes Combination Type (Without Corner Holes) | Circular sawing | - | 8 | 20 ～ 1200 | 20 ～ 1000 | - | - | - | - | - | - | 3 ～ 25 | ||
- | 1 Piece(s) | 10 Day(s) or more | 10 | - | Transparent | Standard | No Drilling Alteration | ＞10^15 | ±1.0 | - | - | No Hole Machining (Standard Type) | Circular Sawing | - | - | 20 ～ 1200 | 20 ～ 1000 | - | - | - | - | - | - | 3 ～ 25 | ||
- | 1 Piece(s) | 12 Day(s) or more | 10 | - | Smoke Brown | Standard | 2H | ＞10^15 | ±1.0 | - | - | Number of Holes Selection Type (With 2H to 8H Holes) | Circular Sawing | - | - | 20 ～ 1200 | 20 ～ 1000 | 6 ～ 1191.5 | 4.5 ～ 995.5 | 3 ～ 8 | - | - | - | 3 ～ 10 | ||
- | 1 Piece(s) | 12 Day(s) or more | 10 | - | Smoke Brown | Standard | 2H | ＞10^15 | ±1.0 | - | - | Number of Holes Selection Type (With 2H to 8H Holes) | Circular Sawing | - | - | 20 ～ 1200 | 20 ～ 1000 | 6 ～ 1191.5 | 4.5 ～ 995.5 | - | 3 ～ 10 | - | - | 3 ～ 10 | ||
- | 1 Piece(s) | 12 Day(s) or more | 10 | - | Smoke Brown | Standard | 2H | ＞10^15 | ±1.0 | - | - | Number of Holes Selection Type (With 2H to 8H Holes) | Circular Sawing | - | - | 20 ～ 1200 | 20 ～ 1000 | 6 ～ 1191.5 | 4.5 ～ 995.5 | - | - | 3 ～ 10 | - | 3 ～ 10 | ||
- | 1 Piece(s) | 12 Day(s) or more | 10 | - | Smoke Brown | Standard | 2H | ＞10^15 | ±1.0 | - | - | Number of Holes Selection Type (With 2H to 8H Holes) | Circular Sawing | - | - | 20 ～ 1200 | 20 ～ 1000 | 6 ～ 1191.5 | 4.5 ～ 995.5 | - | - | - | 5 ～ 8 | 3 ～ 10 | ||
- | 1 Piece(s) | 12 Day(s) or more | 10 | - | Smoke Brown | Standard | 2HL | ＞10^15 | ±1.0 | - | - | Number of Holes Selection Type (With 2H to 8H Holes) | Circular Sawing | - | - | 20 ～ 1200 | 20 ～ 1000 | 4.5 ～ 1195.5 | 6 ～ 991.5 | 3 ～ 8 | - | - | - | 3 ～ 10 | ||
- | 1 Piece(s) | 12 Day(s) or more | 10 | - | Smoke Brown | Standard | 2HL | ＞10^15 | ±1.0 | - | - | Number of Holes Selection Type (With 2H to 8H Holes) | Circular Sawing | - | - | 20 ～ 1200 | 20 ～ 1000 | 4.5 ～ 1195.5 | 6 ～ 991.5 | - | 3 ～ 10 | - | - | 3 ～ 10 | ||
- | 1 Piece(s) | 12 Day(s) or more | 10 | - | Smoke Brown | Standard | 2HL | ＞10^15 | ±1.0 | - | - | Number of Holes Selection Type (With 2H to 8H Holes) | Circular Sawing | - | - | 20 ～ 1200 | 20 ～ 1000 | 4.5 ～ 1195.5 | 6 ～ 991.5 | - | - | 3 ～ 8 | - | 3 ～ 10 | ||
- | 1 Piece(s) | 12 Day(s) or more | 10 | - | Smoke Brown | Standard | 2HL | ＞10^15 | ±1.0 | - | - | Number of Holes Selection Type (With 2H to 8H Holes) | Circular Sawing | - | - | 20 ～ 1200 | 20 ～ 1000 | 4.5 ～ 1195.5 | 6 ～ 991.5 | - | - | - | 5 ～ 8 | 3 ～ 10 | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | - | Smoke Brown | Standard | No Drilling Alteration | ＞10^15 | -0.2 to 0 | - | - | No Hole Machining (Standard Type) | 4-surface Milled | M (0/-0.2) | - | 10 ～ 400 | 10 ～ 200 | - | - | - | - | - | - | 5 ～ 10 | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | - | Smoke Brown | Standard | No Drilling Alteration | ＞10^15 | ±0.1 | - | - | No Hole Machining (Standard Type) | 4-surface Milled | N (±0.1) | - | 10 ～ 400 | 10 ～ 200 | - | - | - | - | - | - | 5 ～ 10 | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | - | Smoke Brown | Standard | No Drilling Alteration | ＞10^15 | 0 to +0.2 | - | - | No Hole Machining (Standard Type) | 4-surface Milled | Q (+0.2/0) | - | 10 ～ 400 | 10 ～ 200 | - | - | - | - | - | - | 5 ～ 10 | ||
- | 1 Piece(s) | 12 Day(s) or more | 10 | - | Smoke Brown | Standard | 4H | ＞10^15 | ±1.0 | - | - | Number of Holes Selection Type (With 2H to 8H Holes) | Circular Sawing | - | - | 20 ～ 1200 | 20 ～ 1000 | 6 ～ 1191.5 | 6 ～ 991.5 | 3 ～ 8 | - | - | - | 3 ～ 10 | ||
- | 1 Piece(s) | 12 Day(s) or more | 10 | - | Smoke Brown | Standard | 4H | ＞10^15 | ±1.0 | - | - | Number of Holes Selection Type (With 2H to 8H Holes) | Circular Sawing | - | - | 20 ～ 1200 | 20 ～ 1000 | 6 ～ 1191.5 | 6 ～ 991.5 | - | 3 ～ 10 | - | - | 3 ～ 10 | ||
- | 1 Piece(s) | 12 Day(s) or more | 10 | - | Smoke Brown | Standard | 4H | ＞10^15 | ±1.0 | - | - | Number of Holes Selection Type (With 2H to 8H Holes) | Circular Sawing | - | - | 20 ～ 1200 | 20 ～ 1000 | 6 ～ 1191.5 | 6 ～ 991.5 | - | - | 3 ～ 10 | - | 3 ～ 10 | ||
- | 1 Piece(s) | 12 Day(s) or more | 10 | - | Smoke Brown | Standard | 4H | ＞10^15 | ±1.0 | - | - | Number of Holes Selection Type (With 2H to 8H Holes) | Circular Sawing | - | - | 20 ～ 1200 | 20 ～ 1000 | 6 ～ 1191.5 | 6 ～ 991.5 | - | - | - | 5 ～ 8 | 3 ～ 10 | ||
- | 1 Piece(s) | 12 Day(s) or more | 10 | - | Smoke Brown | Standard | 6H | ＞10^15 | ±1.0 | - | - | Number of Holes Selection Type (With 2H to 8H Holes) | Circular Sawing | - | - | 20 ～ 1200 | 20 ～ 1000 | 6 ～ 595.5 | 6 ～ 991.5 | 3 ～ 8 | - | - | - | 3 ～ 10 | ||
- | 1 Piece(s) | 12 Day(s) or more | 10 | - | Smoke Brown | Standard | 6H | ＞10^15 | ±1.0 | - | - | Number of Holes Selection Type (With 2H to 8H Holes) | Circular Sawing | - | - | 20 ～ 1200 | 20 ～ 1000 | 6 ～ 595.5 | 6 ～ 991.5 | - | 3 ～ 10 | - | - | 3 ～ 10 | ||
- | 1 Piece(s) | 12 Day(s) or more | 10 | - | Smoke Brown | Standard | 6H | ＞10^15 | ±1.0 | - | - | Number of Holes Selection Type (With 2H to 8H Holes) | Circular Sawing | - | - | 20 ～ 1200 | 20 ～ 1000 | 6 ～ 595.5 | 6 ～ 991.5 | - | - | 3 ～ 10 | - | 3 ～ 10 | ||
- | 1 Piece(s) | 12 Day(s) or more | 10 | - | Smoke Brown | Standard | 6H | ＞10^15 | ±1.0 | - | - | Number of Holes Selection Type (With 2H to 8H Holes) | Circular Sawing | - | - | 20 ～ 1200 | 20 ～ 1000 | 6 ～ 595.5 | 6 ～ 991.5 | - | - | - | 5 ～ 8 | 3 ～ 10 | ||
- | 1 Piece(s) | 12 Day(s) or more | 10 | - | Smoke Brown | Standard | 8H | ＞10^15 | ±1.0 | - | - | Number of Holes Selection Type (With 2H to 8H Holes) | Circular Sawing | - | - | 20 ～ 1200 | 20 ～ 1000 | 6 ～ 595.5 | 6 ～ 495.5 | 3 ～ 8 | - | - | - | 3 ～ 10 | ||
- | 1 Piece(s) | 12 Day(s) or more | 10 | - | Smoke Brown | Standard | 8H | ＞10^15 | ±1.0 | - | - | Number of Holes Selection Type (With 2H to 8H Holes) | Circular Sawing | - | - | 20 ～ 1200 | 20 ～ 1000 | 6 ～ 595.5 | 6 ～ 495.5 | - | 3 ～ 10 | - | - | 3 ～ 10 | ||
- | 1 Piece(s) | 12 Day(s) or more | 10 | - | Smoke Brown | Standard | 8H | ＞10^15 | ±1.0 | - | - | Number of Holes Selection Type (With 2H to 8H Holes) | Circular Sawing | - | - | 20 ～ 1200 | 20 ～ 1000 | 6 ～ 595.5 | 6 ～ 495.5 | - | - | 3 ～ 10 | - | 3 ～ 10 | ||
- | 1 Piece(s) | 12 Day(s) or more | 10 | - | Smoke Brown | Standard | 8H | ＞10^15 | ±1.0 | - | - | Number of Holes Selection Type (With 2H to 8H Holes) | Circular Sawing | - | - | 20 ～ 1200 | 20 ～ 1000 | 6 ～ 595.5 | 6 ～ 495.5 | - | - | - | 5 ～ 8 | 3 ～ 10 | ||
- | 1 Piece(s) | 6 Day(s) or more | - | RoHS compliant (10 substances) | Smoke Brown | Standard | - | ＞10^15 | ±1.0 | 2 | 2 | Number of Holes Combination Type (Without Corner Holes) | Circular sawing | - | 8 | 20 ～ 1200 | 20 ～ 1000 | - | - | - | - | - | - | 3 ～ 10 | ||
- | 1 Piece(s) | 6 Day(s) or more | - | RoHS compliant (10 substances) | Smoke Brown | Standard | - | ＞10^15 | ±1.0 | 2 | 2 | Number of Holes Combination Type (Without Corner Holes) | Circular sawing | - | 8 | 20 ～ 1200 | 20 ～ 1000 | - | - | - | - | - | - | 3 ～ 10 | ||
- | 1 Piece(s) | 6 Day(s) or more | - | RoHS compliant (10 substances) | Smoke Brown | Standard | - | ＞10^15 | ±1.0 | 2 | 2 | Number of Holes Combination Type (Without Corner Holes) | Circular sawing | - | 8 | 20 ～ 1200 | 20 ～ 1000 | - | - | - | - | - | - | 3 ～ 10 | ||
- | 1 Piece(s) | 6 Day(s) or more | - | RoHS compliant (10 substances) | Smoke Brown | Standard | - | ＞10^15 | ±1.0 | 2 | 2 | Number of Holes Combination Type (Without Corner Holes) | Circular sawing | - | 8 | 20 ～ 1200 | 20 ～ 1000 | - | - | - | - | - | - | 3 ～ 10 | ||
- | 1 Piece(s) | 6 Day(s) or more | - | RoHS compliant (10 substances) | Smoke Brown | Standard | - | ＞10^15 | ±1.0 | 2 | 4 | Number of Holes Combination Type (Without Corner Holes) | Circular sawing | - | 12 | 20 ～ 1200 | 20 ～ 1000 | - | - | - | - | - | - | 3 ～ 10 | ||
- | 1 Piece(s) | 6 Day(s) or more | - | RoHS compliant (10 substances) | Smoke Brown | Standard | - | ＞10^15 | ±1.0 | 2 | 4 | Number of Holes Combination Type (Without Corner Holes) | Circular sawing | - | 12 | 20 ～ 1200 | 20 ～ 1000 | - | - | - | - | - | - | 3 ～ 10 | ||
- | 1 Piece(s) | 6 Day(s) or more | - | RoHS compliant (10 substances) | Smoke Brown | Standard | - | ＞10^15 | ±1.0 | 2 | 4 | Number of Holes Combination Type (Without Corner Holes) | Circular sawing | - | 12 | 20 ～ 1200 | 20 ～ 1000 | - | - | - | - | - | - | 3 ～ 10 | ||
- | 1 Piece(s) | 6 Day(s) or more | - | RoHS compliant (10 substances) | Smoke Brown | Standard | - | ＞10^15 | ±1.0 | 2 | 4 | Number of Holes Combination Type (Without Corner Holes) | Circular sawing | - | 12 | 20 ～ 1200 | 20 ～ 1000 | - | - | - | - | - | - | 3 ～ 10 | ||
- | 1 Piece(s) | 6 Day(s) or more | - | RoHS compliant (10 substances) | Smoke Brown | Standard | - | ＞10^15 | ±1.0 | 4 | 4 | Number of Holes Combination Type (With Corner Holes) | Circular sawing | - | 12 | 20 ～ 1200 | 20 ～ 1000 | - | - | 3 ～ 8 | - | - | - | 3 ～ 10 | ||
- | 1 Piece(s) | 6 Day(s) or more | - | RoHS compliant (10 substances) | Smoke Brown | Standard | - | ＞10^15 | ±1.0 | 4 | 4 | Number of Holes Combination Type (With Corner Holes) | Circular sawing | - | 12 | 20 ～ 1200 | 20 ～ 1000 | - | - | - | 3 ～ 10 | - | - | 3 ～ 10 | ||
- | 1 Piece(s) | 6 Day(s) or more | - | RoHS compliant (10 substances) | Smoke Brown | Standard | - | ＞10^15 | ±1.0 | 4 | 4 | Number of Holes Combination Type (With Corner Holes) | Circular sawing | - | 12 | 20 ～ 1200 | 20 ～ 1000 | - | - | - | - | 3 ～ 10 | - | 3 ～ 10 | ||
- | 1 Piece(s) | 6 Day(s) or more | - | RoHS compliant (10 substances) | Smoke Brown | Standard | - | ＞10^15 | ±1.0 | 4 | 4 | Number of Holes Combination Type (With Corner Holes) | Circular sawing | - | 12 | 20 ～ 1200 | 20 ～ 1000 | - | - | - | - | - | 5 ～ 8 | 3 ～ 10 | ||
- | 1 Piece(s) | 10 Day(s) or more | 10 | - | Smoke Brown | Standard | No Drilling Alteration | ＞10^15 | ±1.0 | - | - | No Hole Machining (Standard Type) | Circular Sawing | - | - | 20 ～ 1200 | 20 ～ 1000 | - | - | - | - | - | - | 3 ～ 10 | ||
- | 1 Piece(s) | 12 Day(s) or more | 10 | - | Smoke Brown | Antistatic | 2H | ＞10^17 | ±1.0 | - | - | Number of Holes Selection Type (With 2H to 8H Holes) | Circular Sawing | - | - | 20 ～ 1200 | 20 ～ 1000 | 6 ～ 1191.5 | 4.5 ～ 995.5 | 3 ～ 4 | - | - | - | 3 ～ 5 | ||
- | 1 Piece(s) | 12 Day(s) or more | 10 | - | Smoke Brown | Antistatic | 2H | ＞10^17 | ±1.0 | - | - | Number of Holes Selection Type (With 2H to 8H Holes) | Circular Sawing | - | - | 20 ～ 1200 | 20 ～ 1000 | 6 ～ 1191.5 | 4.5 ～ 995.5 | - | 3 ～ 10 | - | - | 3 ～ 5 | ||
- | 1 Piece(s) | 12 Day(s) or more | 10 | - | Smoke Brown | Antistatic | 2H | ＞10^17 | ±1.0 | - | - | Number of Holes Selection Type (With 2H to 8H Holes) | Circular Sawing | - | - | 20 ～ 1200 | 20 ～ 1000 | 6 ～ 1191.5 | 4.5 ～ 995.5 | - | - | 3 ～ 6 | - | 3 ～ 5 | ||
- | 1 Piece(s) | 12 Day(s) or more | 10 | - | Smoke Brown | Antistatic | 2H | ＞10^17 | ±1.0 | - | - | Number of Holes Selection Type (With 2H to 8H Holes) | Circular Sawing | - | - | 20 ～ 1200 | 20 ～ 1000 | 6 ～ 1191.5 | 4.5 ～ 995.5 | - | - | - | 5 ～ 8 | 3 ～ 5 | ||
- | 1 Piece(s) | 12 Day(s) or more | 10 | - | Smoke Brown | Antistatic | 2HL | ＞10^17 | ±1.0 | - | - | Number of Holes Selection Type (With 2H to 8H Holes) | Circular Sawing | - | - | 20 ～ 1200 | 20 ～ 1000 | 4.5 ～ 1195.5 | 6 ～ 991.5 | 3 ～ 4 | - | - | - | 3 ～ 5 | ||
- | 1 Piece(s) | 12 Day(s) or more | 10 | - | Smoke Brown | Antistatic | 2HL | ＞10^17 | ±1.0 | - | - | Number of Holes Selection Type (With 2H to 8H Holes) | Circular Sawing | - | - | 20 ～ 1200 | 20 ～ 1000 | 4.5 ～ 1195.5 | 6 ～ 991.5 | - | 3 ～ 10 | - | - | 3 ～ 5 | ||
- | 1 Piece(s) | 12 Day(s) or more | 10 | - | Smoke Brown | Antistatic | 2HL | ＞10^17 | ±1.0 | - | - | Number of Holes Selection Type (With 2H to 8H Holes) | Circular Sawing | - | - | 20 ～ 1200 | 20 ～ 1000 | 4.5 ～ 1195.5 | 6 ～ 991.5 | - | - | 3 ～ 6 | - | 3 ～ 5 | ||
- | 1 Piece(s) | 12 Day(s) or more | 10 | - | Smoke Brown | Antistatic | 2HL | ＞10^17 | ±1.0 | - | - | Number of Holes Selection Type (With 2H to 8H Holes) | Circular Sawing | - | - | 20 ～ 1200 | 20 ～ 1000 | 4.5 ～ 1195.5 | 6 ～ 991.5 | - | - | - | 5 ～ 8 | 3 ～ 5 | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | - | Smoke Brown | Antistatic | No Drilling Alteration | ＞10^17 | -0.2 to 0 | - | - | No Hole Machining (Standard Type) | 4-surface Milled | M (0/-0.2) | - | 10 ～ 400 | 10 ～ 200 | - | - | - | - | - | - | 5 | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | - | Smoke Brown | Antistatic | No Drilling Alteration | ＞10^17 | ±0.1 | - | - | No Hole Machining (Standard Type) | 4-surface Milled | N (±0.1) | - | 10 ～ 400 | 10 ～ 200 | - | - | - | - | - | - | 5 | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | - | Smoke Brown | Antistatic | No Drilling Alteration | ＞10^17 | 0 to +0.2 | - | - | No Hole Machining (Standard Type) | 4-surface Milled | Q (+0.2/0) | - | 10 ～ 400 | 10 ～ 200 | - | - | - | - | - | - | 5 | ||
- | 1 Piece(s) | 12 Day(s) or more | 10 | - | Smoke Brown | Antistatic | 4H | ＞10^17 | ±1.0 | - | - | Number of Holes Selection Type (With 2H to 8H Holes) | Circular Sawing | - | - | 20 ～ 1200 | 20 ～ 1000 | 6 ～ 1191.5 | 6 ～ 991.5 | 3 ～ 4 | - | - | - | 3 ～ 5 | ||
- | 1 Piece(s) | 12 Day(s) or more | 10 | - | Smoke Brown | Antistatic | 4H | ＞10^17 | ±1.0 | - | - | Number of Holes Selection Type (With 2H to 8H Holes) | Circular Sawing | - | - | 20 ～ 1200 | 20 ～ 1000 | 6 ～ 1191.5 | 6 ～ 991.5 | - | 3 ～ 10 | - | - | 3 ～ 5 | ||
- | 1 Piece(s) | 12 Day(s) or more | 10 | - | Smoke Brown | Antistatic | 4H | ＞10^17 | ±1.0 | - | - | Number of Holes Selection Type (With 2H to 8H Holes) | Circular Sawing | - | - | 20 ～ 1200 | 20 ～ 1000 | 6 ～ 1191.5 | 6 ～ 991.5 | - | - | 3 ～ 6 | - | 3 ～ 5 | ||
- | 1 Piece(s) | 12 Day(s) or more | 10 | - | Smoke Brown | Antistatic | 4H | ＞10^17 | ±1.0 | - | - | Number of Holes Selection Type (With 2H to 8H Holes) | Circular Sawing | - | - | 20 ～ 1200 | 20 ～ 1000 | 6 ～ 1191.5 | 6 ～ 991.5 | - | - | - | 5 ～ 8 | 3 ～ 5 | ||
- | 1 Piece(s) | 12 Day(s) or more | 10 | - | Smoke Brown | Antistatic | 6H | ＞10^17 | ±1.0 | - | - | Number of Holes Selection Type (With 2H to 8H Holes) | Circular Sawing | - | - | 20 ～ 1200 | 20 ～ 1000 | 6 ～ 595.5 | 6 ～ 991.5 | 3 ～ 4 | - | - | - | 3 ～ 5 | ||
- | 1 Piece(s) | 12 Day(s) or more | 10 | - | Smoke Brown | Antistatic | 6H | ＞10^17 | ±1.0 | - | - | Number of Holes Selection Type (With 2H to 8H Holes) | Circular Sawing | - | - | 20 ～ 1200 | 20 ～ 1000 | 6 ～ 595.5 | 6 ～ 991.5 | - | 3 ～ 10 | - | - | 3 ～ 5 | ||
- | 1 Piece(s) | 12 Day(s) or more | 10 | - | Smoke Brown | Antistatic | 6H | ＞10^17 | ±1.0 | - | - | Number of Holes Selection Type (With 2H to 8H Holes) | Circular Sawing | - | - | 20 ～ 1200 | 20 ～ 1000 | 6 ～ 595.5 | 6 ～ 991.5 | - | - | 3 ～ 6 | - | 3 ～ 5 | ||
- | 1 Piece(s) | 12 Day(s) or more | 10 | - | Smoke Brown | Antistatic | 6H | ＞10^17 | ±1.0 | - | - | Number of Holes Selection Type (With 2H to 8H Holes) | Circular Sawing | - | - | 20 ～ 1200 | 20 ～ 1000 | 6 ～ 595.5 | 6 ～ 991.5 | - | - | - | 5 ～ 8 | 3 ～ 5 | ||
- | 1 Piece(s) | 12 Day(s) or more | 10 | - | Smoke Brown | Antistatic | 8H | ＞10^17 | ±1.0 | - | - | Number of Holes Selection Type (With 2H to 8H Holes) | Circular Sawing | - | - | 20 ～ 1200 | 20 ～ 1000 | 6 ～ 595.5 | 6 ～ 495.5 | 3 ～ 4 | - | - | - | 3 ～ 5 | ||
- | 1 Piece(s) | 12 Day(s) or more | 10 | - | Smoke Brown | Antistatic | 8H | ＞10^17 | ±1.0 | - | - | Number of Holes Selection Type (With 2H to 8H Holes) | Circular Sawing | - | - | 20 ～ 1200 | 20 ～ 1000 | 6 ～ 595.5 | 6 ～ 495.5 | - | 3 ～ 10 | - | - | 3 ～ 5 | ||
- | 1 Piece(s) | 12 Day(s) or more | 10 | - | Smoke Brown | Antistatic | 8H | ＞10^17 | ±1.0 | - | - | Number of Holes Selection Type (With 2H to 8H Holes) | Circular Sawing | - | - | 20 ～ 1200 | 20 ～ 1000 | 6 ～ 595.5 | 6 ～ 495.5 | - | - | 3 ～ 6 | - | 3 ～ 5 | ||
- | 1 Piece(s) | 12 Day(s) or more | 10 | - | Smoke Brown | Antistatic | 8H | ＞10^17 | ±1.0 | - | - | Number of Holes Selection Type (With 2H to 8H Holes) | Circular Sawing | - | - | 20 ～ 1200 | 20 ～ 1000 | 6 ～ 595.5 | 6 ～ 495.5 | - | - | - | 5 ～ 8 | 3 ～ 5 | ||
- | 1 Piece(s) | 10 Day(s) or more | 10 | - | Smoke Brown | Antistatic | No Drilling Alteration | ＞10^17 | ±1.0 | - | - | No Hole Machining (Standard Type) | Circular Sawing | - | - | 20 ～ 1200 | 20 ～ 1000 | - | - | - | - | - | - | 3 ～ 5 | ||
- | 1 Piece(s) | 12 Day(s) or more | 10 | - | Orange | Standard | 2H | ＞10^15 | ±1.0 | - | - | Number of Holes Selection Type (With 2H to 8H Holes) | Circular Sawing | - | - | 20 ～ 1200 | 20 ～ 1000 | 6 ～ 1191.5 | 4.5 ～ 995.5 | 3 ～ 4 | - | - | - | 3 ～ 5 | ||
- | 1 Piece(s) | 12 Day(s) or more | 10 | - | Orange | Standard | 2H | ＞10^15 | ±1.0 | - | - | Number of Holes Selection Type (With 2H to 8H Holes) | Circular Sawing | - | - | 20 ～ 1200 | 20 ～ 1000 | 6 ～ 1191.5 | 4.5 ～ 995.5 | - | 3 ～ 10 | - | - | 3 ～ 5 |
Loading...
More Information
Basic Information
| Material | Acrylic | Continuous Operating Temperature (High Temperature)(℃) | 80 to 100 | Continuous Operating Temperature (Low Temperature)(℃) | -30 |
|---|---|---|---|---|---|
| Oil | ○ | Acid | ○ | Alkali | ○ |
Specification/Dimensions
-
Environmentally Friendly
- RoHS compliant (10 substances)
-
Color
-
Grade
- Standard
- Antistatic
-
Hole Machining
-
Volume Resistivity Value(Ω･cm)
- ＞10^15
- ＞10^17
-
A/B Dimension Tolerance
- ±1.0
- -0.2 to 0
- ±0.1
- 0 to +0.2
-
Number of Holes on A Side
- 2
- 3
- 4
-
Number of Holes on B Side
- 2
- 3
- 4
-
Shape
- No Hole Machining (Standard Type)
- Number of Holes Combination Type (With Corner Holes)
- Number of Holes Combination Type (Without Corner Holes)
- Number of Holes Selection Type (With 2H to 8H Holes)
-
4-surface Finishing Method
- 4-surface Milled
- Circular Sawing
- Circular sawing
-
4-surface Tolerance Selectable
- M (0/-0.2)
- N (±0.1)
- Q (+0.2/0)
-
Number of Holes
-
A(mm)
-
B(mm)
-
F(mm)
-
G(mm)
-
M(mm)
-
N(mm)
-
P(mm)
-
Q(mm)
-
T(mm)
-
type
- ACA
- ACA2H
- ACA2HL
- ACA4FM
- ACA4FN
- ACA4FQ
- ACA4H
- ACA6H
- ACA8H
- ACA□□V□
- ACBA
- ACBA2H
- ACBA2HL
- ACBA4FM
- ACBA4FN
- ACBA4FQ
- ACBA4H
- ACBA6H
- ACBA8H
- ACBA□□V□
- ACBA□□W□
- ACBTA
- ACBTA2H
- ACBTA2HL
- ACBTA4FM
- ACBTA4FN
- ACBTA4FQ
- ACBTA4H
- ACBTA6H
- ACBTA8H
- ACDA
- ACDA2H
- ACDA2HL
- ACDA4FM
- ACDA4FN
- ACDA4FQ
- ACDA4H
- ACDA6H
- ACDA8H
- ACTA
- ACTA2H
- ACTA2HL
- ACTA4FM
- ACTA4FN
- ACTA4FQ
- ACTA4H
- ACTA6H
- ACTA8H
- ACTA□□W□
- L-ACA
- L-ACBA
- L-ACBTA
- L-ACTA
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 6 Day(s) or Less
- 10 Day(s) or Less
- 12 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Plastic Sheets -Thin Type -0.5 to 2.0 mm
- Antistatic PVC Plates -Chemical Resistant & Flame Retardant
- Extra Thin Plastic Sheets -Polyacetal / Fluororesin / Polycarbonate
- Economy Acrylic Plate -Curved / Extruded Type
- Polycarbonate Plates -High Impact Resistance
- PVC Plate ESS -Rigid Type -Excellent Heat Processability
- Acrysunday Acrylic Plate -Transparent / Semi-Transparent / Opaque
- Polyethylene Plate -Transparent -500×1000 mm -Rigid Type
Complementary Products
Customers Who Viewed This Item Also Viewed
-
-
-
-
6 Series Aluminum Frame - Square 30x30mm, 4 Side Slots, A6N01SS-T5 AluminumMISUMI
Days to Ship : 2 Day(s) or more
-
Sumi-Holiday (Acrylic Shee, Transparency)HIKARI
Standard Price : MYR 20.97-
Days to Ship : 8 Day(s) or more
-
-
Configurable Plates - Aluminum - A5052P (Aℓ-Mg Aluminum Alloy)MISUMI
Days to Ship : 8 Day(s) or more
-
MC Nylon® Plates-Standard / Sliding / High Strength / Conductivity / Weather Resistance GradeMISUMI
Days to Ship : 6 Day(s) or more
-
5 Series Aluminum Frame - Square 20x20mm, 4 Side Slots, A6N01SS-T5 AluminumMISUMI
Days to Ship : 2 Day(s) or more
-
-
Reversing Bracket with Protrusion - 6 Series, 8mm Groove, 1-Row (90 Degree)MISUMI
Standard Price : MYR 3.64-
Days to Ship : 1 Day(s) or more
-
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy